6280 switching off radio problem

Hi all.
When using radio on my 6280 I disconnect hands-free (from the sales package) and receive message "Connect an enhancement". It’s ok.
But I receive the same message when I try to switch off the radio! So to switch it off I should connect hands-free and only then I will have possibility to switch the radio off. Looks like a bug.
Firmware v03.81

21-Sep-2006
09:49 AM
sash wrote:
Exactly the same! And it really looks strange..
For me it is not strange. I'm frequently using this feature when I have to turn off the radio quickly.
Imagine the situation when you are walking through the street, have the phone in a pocket and want to quickly turn off the radio for a minute or two. Sometimes I'm using this to answer phone without HF (ie. in a bus, where people look at me like they saw an alien when talking to myself (HF) ).
I just disconnect HF from phone. Then I reconnect it and radio works again.
If you left radio on and HF disconnected the radio will turn off automaticaly after 4-5 minutes. You can see a message "Radio off" or simillar.
Sergio
Sergio
Current phone: 6280, V3.81, 6230i
Older phones: 5110,7110,6210,6310i,6610,6230

Similar Messages

Wifi switches off: temperature problem?

Hellom
my macbookpro 17" 2.5 GHz core 2 duo has the following wifi problem:
some 5 to 10 minutes after switching the machine on, WIFI switches off. WIFI icon in the top left still shows active but in wifi preferences it is of and cannot be switched on.
the bottom of my MBP also gets quite warm.
I don't know if that is related.
I recently switch from maverics to yosemty, but the problem with wifi stayed.
anyone can help?
thanks in advance.

Hello,
Thanks for using Apple Support Communities.
To troubleshoot this issue where you're unable to turn Wi-Fi on, please follow the directions in the article linked to below.
Wi-Fi: How to troubleshoot Wi-Fi connectivity - Apple Support
Take care,
Alex H.

Ck-7w carkit wont switch off radio

I have a ck-7w carkit which as been working fine , the battery went dead on my wagon and since then my carkit doest work correctly, i have lost my instruction booklet to see if there is something i am doing wrong. The carkit and phone pair up no problems but when i ring the phone i can accept on the carkit button but the radio/cd continues the person who is on the other end of the line can hear me talking ok but i cant hear them. Is there something im missing ?
Regards in advance
Stuart

The mute has somehow disconnected.
Best thing would be to have a profesional installer check this for you.
If you are Uk based you can find your nearest Nokia Accredited installer here:
www.nokia.co.uk/carkitfitters

I phone switched off, I phone switched off, I phone switched off suddenly

i-phone suddenly switched off and now can not switch on

Suddenly switch off / shutdown problem :
Because of hardware problems (panic.plist) my Iphone 4s replaced with new one. (if you have panic.plist in your logfile (diagnostic & usage), you should restore (using Itunes) your Iphone, if it is persist you have to replace with new one.
If you want to use Iphone Don't Buy Iphone 4s, you should buy Iphone 4(It is my second Iphone 4s, but I have still problem with battery - my first phone changed because of different hardware problems (suddenly swich off)) with 1 hour (soft condition) usage remaining battery is %90 (very poor.)

6280 music player switches off

while playing music files on the phone for some reason it just switches off the music player and the phone goes back to screensaver/standby.
i used the pc suite to transfer files to a 2 gig memory card (san disk).
if i go back to play the track again it usually plays fine.
also the phone gives a "dull beep" as the player shuts down.
i've deleted files and reloaded but the problem keeps occuring sometimes with the same file,sometimes another one.but like i say when i go to play the file again it seems fine.
any advice?
cheers.

I get exactly the same problem with my 6280 and SanDisk 2Gb memory card! Mine has about 1.5Gb of music on it and whenever I use Music Player on the phone to play the tracks in a random order, it gets to about the third track before it gives the "dull beep", resets and goes back to the standby screen. It's really frustrating when the 6280 is advertised as being a great 'music phone' and you can't even listen to more than a couple of tracks in a row! My old 6230i used to do this too... I think I will email Nokia Support for an answer to this problem and if I get one I will post it up here. Or if anyone else knows a way of fixing this problem then please let us know! Thanks
Phones I have owned: 5110 -> 6210 -> 6610 -> 6230 -> 6230i -> 6280

My ipod touch will not switch on and is no longer recognised by itunes. Before this i tried to restore it as I was having some problems with it switching off and on by itself randomly.

My ipod touch will not switch on and is no longer recognized by itunes. Before this i tried to restore it as I was having some problems with it switching off and on by itself randomly.
I tried to restore it and I got error code 2009, so I closed it tried again got error code 1659, now it wont do anything and it's not recognized by my pc /itunes please help x

For the restore error messages try:
iTunes: Specific update-and-restore error messages and advanced troubleshooting

IPod Nano (4th Generation) switches on when connected to USB power - shows Menu & hangs (unresponsive to click wheel) - deems off after 5-sec - Switches off after disconnecting from USB Power - syncs with iTunes - Tried 5R's - Problem still persists

1. The iPod Nano (4th Generation - 8GB) switches on, only when connected to USB power by showing apple logo and displays Menu options thereafter..
2. However, I can not access Menu as it is unresponsive to click wheel. As a result it is inaccessible to any further use,
3. NOTE: it displays "Battery Fully charged" icon on the screen without any "Lock" icon.
4. After 5-sec to 10-secs the screen deems off.. i.e. goes to sleep mode.. And thereafter would probably remain like that (sleeeping) for eternity!!!!
5. It Switches off after WITHOUT DISPLAYING any Apple Logo immediately after disconnecting from USB Power.
6. In other words, it can be switched on only through USB power in spite of battery being fully charged.
7. Interestingly, it syncs with iTunes. It is recognised in iTunes (Latest version 11+).. Displays on screen all commands Like.. syncronising, connecting, connected,
8. Allows to add Music, videos like a normal ipod & displays all status information in iTunes.
9. Read Trobleshooting & Tried all 5R's. Registered, Resetted, updated & Restored to iOS 1.0.2
10. It is now displaying to select Language in place of Menu options, with no access through click wheel, centre button whatsoever... Problem still persists
KINDLY GUIDE ME THE SOLUTION. APPRECIATE YOUR RESPONSE in advance...

"I get the feeling that this is a software issue that could probably be solved quite easily"
Since you have already tried all the normal troubleshooting solutions, take the iPod to your nearest Apple Store for a *proper diagnosis.* The staff there will be able to confirm if your problem is software or hardware _*at no cost to you.*_
!http://i50.tinypic.com/izvwo1.gif!

I've added to ios6 to my new ipod touch with no problems. I'm trying to now restore the factory settings but the screen is frozen with an itunes sign and lead pointing towards it. The ipod won't even switch off. Can anyone help as it's driving me crazy

I've added ios6 to my new ipod but tried then to restore the factory settings. It won't extract any settings and the itunes then tells me that the server cannot be reached or is unavailable. I've been trying all day. Now the ipod has a itunes sign and a computer lead pointing towards it on the screen and this is frozen. It won't switch off or do anything else. Any ideas as this is now driving me crazy.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK

Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK with plug-in keyboard and mouse

Hi, Derek -
...the screen splits into 4 areas and open windows seperate and shrink.
Sounds like Spaces is being activated somehow. With the wired keyboard and mouse in use, select the Exposé & Spaces control pane in System Preferences, click the choice in that pane for Spaces. See what the settings are. There are some activation settings in that pane - by default, F8 activates it.
It could be that the bluetooth keyboard has some stuck keys and is activating Spaces; or that the activation command has somehow been reset to something that the bluetooth mouse, or bluetooth itself, is triggering.

I have a frustrating problem with my iPhone 5 post ios8 installation. The ring tone won't sound when phone is locked/switched off, although the vibration does work. I think it has something to do with "do not disturb"

Hi, I have a frustrating problem that seems to have occurred post iOS 8 installation. When my iphone5 is switched off the ring tone fails to sound i only get the vibration. If i am using my phone and a have an incoming call then the ring tone works as normal. I think it has something to do with "do not disturb" ... i see from the menu in "do not disturb" that under the heading "silence" there are two options "always" and "only when the phone is locked" This does not seem to make sense as i have to choose one or the other!
If anybody can help advise me on this problem i would be very grateful.
Thanks

Hello Mogulman46,
So what that means is when you have Do Not Disturb turned on, you may have an alert depending on the setting and how you are using your iPhone. So if it is set to Always, then that means that no matter what, your iPhone will not be notified. If it set to Only while the iPhone is locked, then that means that you will not get notification when your iPhone is locked but you will get notifications if your iPhone is being used. Also keep in mind the settings All Calls From can be set to certain contacts like Favorites, Everyone or no one. If you are using Do Not Disturb and you do not need it, then turn it off.
Use Do Not Disturb on your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht5463
Regards,
-Norm G.

I just bought an iphone 4s in surat india.the phone switches off itself atleast 2 times in a day.at times the problem is that when it goes to sleep a person trying that number gets a dialer ring.Hence he seems that i have not picked up his call

i just bought an iphone 4s a month back
the phone gets switched off on its own atleast 2 times in a day and when we press the home button it gets started.
when it is in the switched off mode, a person calling on it gets my dialer tone. He feels that i have not answered his call and has gone as a
missed call on my phone. But in actual, i have never received the call nor its presence is there as a missed call on the "switched off" iphone 4s.
Hence the caller feels that i am not answering his call nor even calling after i see his missed call
this is a very grave problem i am facing
please help me out.
chetan sanghvi

i just bought an iphone 4s a month back
the phone gets switched off on its own atleast 2 times in a day and when we press the home button it gets started.
when it is in the switched off mode, a person calling on it gets my dialer tone. He feels that i have not answered his call and has gone as a
missed call on my phone. But in actual, i have never received the call nor its presence is there as a missed call on the "switched off" iphone 4s.
Hence the caller feels that i am not answering his call nor even calling after i see his missed call
this is a very grave problem i am facing
please help me out.
chetan sanghvi

After every Firefox 34.0 reloading my add-ons have been switched off by unknown program or virus. How can i solve this problem?

''locking this thread as duplicate, please continue at [https://support.mozilla.org/en-US/questions/1038650 /questions/1038650]''
After every Firefox 34.0 reloading my add-ons have been switched off by unknown program or virus. Although i can switch them on and reboot firefox to fix it, but it is a little bit boring. How can i solve this problem?

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
* [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

The iphone has been acting weird. my iphone doesnt charge whenever it is switched On. When I switch OFF the phone, it charges for 2 mins then comes back On and stops charging. I dont know what the problem is. trust me, the problem isnt from d charger

the iphone has been acting weird. my iphone doesnt charge whenever it is switched On. When I switch OFF the phone, it charges for 2 mins then comes back On and stops charging. I dont know what the problem is. trust me, the problem isnt from d charger. PLS anyone with any solution

@wetdro
If your device has been jailbroken during the warranty, Apple will not service it.
Maybe you missed that in this article:
Inability to apply future software updates: Some unauthorized modifications have caused damage to iOS that is not repairable. This can result in the hacked iPhone, iPad, or iPod touch becoming permanently inoperable when a future Apple-supplied iOS update is installed.
Apple strongly cautions against installing any software that hacks iOS. It is also important to note that unauthorized modification of iOS is a violation of the iOS end-user software license agreement and because of this, Apple may deny service for an iPhone, iPad, or iPod touch that has installed any unauthorized software.
copied from Unauthorized modification of iOS can cause security vulnerabilities, instability, shortened battery life, and other issu…

Problem Cisco AIR-LAP1131AG-E-K9 Ethernet LED = Off; Radio LED = RED ; Status LED = RED ;

hi,
I have a Cisco AIR-LAP1131AG-E-K9 when I boot one accesspoint it gives Ethernet LED = Off; Radio LED = RED ; Status LED = RED and only next listing in the screen:
Xmodem file system is available.
Flashfs[0]: unable to allocate available block.
The system has been interrupted, or encountered an error during initializion of the flash filesystem.
The foolowing commands will initialize the flash filesystem, and finish loading the operating system software:
flash_init
ether_init
tftp_init
boot
When I type this commands, it doesn't help at all. The output will be following:
ap: flash_init
Initializing Flash...
flashfs[0]: out of memory
...done Initializing Flash.
ap: ether_init
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
ap: tftp_init
Unable to get our ip address: no "IP_ADDR" variable set
ap: boot
Loading ""...; permission denied
Error loading ""
Interrupt within 5 seconds to abort boot process.
Boot process failed...
ap:
what i do ? please help , thanks

Duplicate posts.
Go here: http://supportforums.cisco.com/discussion/12154826/problem-cisco-air-lap1131ag-e-k9-ethernet-led-radio-led-red-status-led-red

HT1414 My iPhone5 got a problem of getting automatically switched off and then automatically switched on. First i can see my screen getting faded to pinkinsh sort of color and then showing vertical grid lines. any suggestions?

My iphone5 got a problem of getting switched off and on automatically. I can see my screen getting faded and then i can see the pink vertical lines before it switches off. After about 10 seconds it switches on again.

Hi sumit1310,
Thanks for visiting Apple Support Communities.
I'd start with these troubleshooting steps:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Regards,
Jeremy

6280 switching off radio problem

Similar Messages

Maybe you are looking for