64-Bit USB Drivers: WHEN????????????

See message subject -- it's all there. Don't tell me about "Bluetooth" or "WiFi" workarounds. Tell me WHEN there will be 64-bit USB drivers.
Post relates to: Palm TX

I've finally solved the 64-bit USB Driver problem with my Palm T|X. I can now sync my PDA with WinXP Pro /x64 and Vista /x64 with no problems or by using funky work-arounds. Just plug it in to the USB port and away she goes -- recognized instantly!
How did I do it? Not with anything from Palm!
Bought an HP iPAQ 210 that runs under Windows Mobile Classic, version 6. Amazing how there's a 64-bit ActiveSync made for WinXP /x64. Does a number of things in addition to being able to sync using a USB cord . . . Bluetooth 2.0 (the T|X is the slower 1.0 or 1.1) . . . 802.11g (T|X is the slower 802.11b) . . . and it has a VGA 640x480 screen. Yes, it goes for a higher price than a T|X, but wouldn't even have been looking at other PDAs if there had been 64-bit WinXP and Vista drivers for it along with the loss of some features in the latest Palm Desktop (released finally for Vista). The T|X is a fine PDA, except . . . no 64-bit drivers . . . nothing about when they might appear . . . for years now . . . stone silence from Palm about it . . . and quite seriously, it's my sole reason for looking for a different PDA and dispensing with the T|X.

Similar Messages

64 Bit Windows7/8/8.1 USB drivers for Palm Desktop

Thanks to the great folks over at Aceeca.com (makers of NEW PalmOS Garnet devices), USB drivers for 64bit Vista, Windows 7, and Win 8 operating systems are available. There are many users reporting Palm Desktop 4.x is also working.
I have synced my TX to my Vista64 bit laptop, and Windows 8.1 HP Spectre X2 hybrid successfully via my USB cable.
The drivers are located here:
Aceeca Driver Downloads
Installation instructions (from Aceeca) for Windows 7 are included in the download.
Basic instructions:
1. Download the drivers and Extract them to the same folder. Remember the folder you extracted them to.
2. Try to HotSync your device. It will fail.
3. Open the Device Manager, and look for the Yellow Triangle next to either "Acceca" or "Palm Device" under "Other devices".
4. Right-click on the device, and choose "Update Driver Software".
5. Choose "Browse My Computer for Software" and direct it to the folder you extracted the Aceeca drivers to.
6. Choose "Next" at the driver file location window, and then tell it to "Always trust software from Aceeca Ltd." then click the "Install" button.
7. I received an error message (Vista64) that told me "The drivers were installed but the device couldn't be opened." I saw that my TX had timed out and went to sleep. I tried a HotSync and it worked!!!
Good luck!
NOTE: Palm Desktop 6.22 may only show Media and Install. Here's how to fix that:
If Palm Desktop 6.2.2 only shows Media and Install, try this: Right-click on the shortcut for Palm Desktop, then choose "Run as Administrator". The ther modules should appear.
To make Palm Desktop Run as Administrator every time in Windows 8/8.1:
Close Palm Desktop, if open. (This is a very important thing to always do when using 6.2.2 - it has been known to lose data when a computer is shut down without closing the program!)
Right Click on the Palm Desktop Icon in the Metro screen, then choose "Open File Location". You will now see the actual file for the shortcut.
Right-click on the "Palm Desktop" shortcut file, then Properties. Now pick the Compatibility Tab at the top.
At the bottom of the Compatibility Tab is a checkbox: "Run this Program as Administrator", Click OK .
Try opening Palm Desktop, all the parts should appear. You may see a box open when you close the program asking "Did the program run correctly?" I picked "Yes", and it's been working fine since then!
If you are using a much older PalmOS device and want to try using Palm Desktop 4.x, you will need this additional patch from Pimlico Software:
Palm HotSync Setup
WyreNut
Forum member bobboffin has added this post:
"After attempting your first HotSync and failing (as expected) you may be unable to find any trace of the device in Device Manager, making the next step quite difficult. This happened to me, and after some investigation I discovered the following tip that allows Device Manager to show hidden and non-present devices.
Open up Notepad and paste the following two lines into it:
set DEVMGR_SHOW_NONPRESENT_DEVICES=1
start devmgmt.msc
Save it as SetDev.bat into My Documents.
Open My Documents in Windows Explorer and double click on SetDev.bat. Device Manager should open.
In the View menu select Show Hidden Devices.
You may now see under the Other heading the failed device with a yellow triangle against it.
You can now proceed to install the drivers per the instructions.
Note that the driver supports most Palm OS versions. I'm actually using an Aceeca Meazura 1000 ruggedized PDA running OS 4.1 --- bobboffin"
Hope this helps!
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!
This question was solved.
View Solution.

Thank you so much. I was thoroughly disappointed to see that the support telephone for paid support had been discontinued. I thought I would need to replace my (ancient but serviceable) Z22.
I followed the instructions listed here and am very happy to report that I completed a sync!
Thanks again.

Installed Windows & 32 Bit But Drivers and USB ports NOT WORKING.

I bugh an HP Pavillion TS 14 Notebook that came preinstall with Windows 8.1 64 bit which I hate so wiped the drives and installed Windows 7 32 bit and now I have a big problem. None of my network drivers work and the 2 uSB ports where I plug my mouse and other SB hardware in no longer work.
I did a back up of the SW Set up file that has all of the HP dvers for my laptop but both the network and video divers won't install. And When I try to install the drives I get the eror message saying they are not compatible with this version of Windows.
I have loked on the HP website under my laptop model which s as above but HP don't do drivers for Windows 7 32 for my laptop. And I have looked on both the Realteck website for both the Realteck ethnet and Realteck wireless network drivers but none of them work or install on my operating system. The video drivers Intel don't work either. So I am really stuck a I cannot go back to Windows 8.1 as though that 32 bit Windows 7 would work on my laptop but most of my drivers are not compatible with the operating sytem And I don't want to install 64 bit Windows as I like 32 bit.
The drivers that are not working on Windows 7 32 bit are:
Realteck RTL8188EE 802-11b/gn witeless lan
Realteck ethnet die and
Intel High definition graphcs driver
Which don't work at all on Windows 7 32 bit as they are 64 bit only drivers.
So can you please post me a link bth the network and Intel graphics drvers that work with my laptop. As I have tried lots of different Realteck and raphics drivers for Window 7 but NONE of them work on my system. And None of my USB ports are working either. So how do I solve this problem?
This question was solved.
View Solution.

Hi:
Should be no problem to get W7 32 bit to work on that model.
Just use all of the drivers and software from the HP Probook 450 G0 on your model except the Audio, BIOS and firmware files.
Your model uses the Intel HD graphics driver only.
The first driver you have to install is the Intel chipset installation utility and then reboot.
http://h20565.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?cc=us&lang=en&sp4ts.oid=5359407&ac.ad...
Audio: Accept the agreement. Download and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownT...
If for some reason, the Intel HD graphics driver from that model does not work, then use this one...
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23713

Hp elitebook 2560p Missing Drivers when I formated and install new window 7 (64-bit) OS

Please suggest me the solutions:Missing Driver of HP Elitebook 2560p after istalling new window 7 (64 bit). 1. Base system device2. network controller3. PCI Serial Port4. PCI Simple communications controller5. Unknown device6. Unknown device

Hi, Please use the following link http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-Software-Recovery/hp-elitebook-2560p-Missing-Drivers-when-I-formated-and/m-p/5184628 Please install chipset drivers first the reboot then install other drivers. For Unknown drivers, it they are still around, please (a) Right click "Unknown device",
(b) Click "Properties",
(c) Click "Details" tab,
(d) Select "hardare ids" from Property pull down window,
(e) Right click "Value" area and "Select all",
(f) Hold down Ctrl key then press C,
(g) Paste the information to your post back message.
Regards.

New ipad USB drivers for pc running on win7

Error message when downloading USB drivers for new iPad for win 7 (64 bits)

My husband's laptop which is at least 3 years older than mine has not problem with charging or recognizing my IPAD. So I don't think the USB ports have anything to do with this problem. What I see is that the PC wants to load MTP USB driver which fails. I have the Apple Mobile Device driver installed and activated. My computer does not see the IPAD but Itunes does. How do get the PC to recognize the apple mobile device driver before it tries to download the MTP USB driver? I am going to try the last suggestion from Diavonex to see if it will work. This is sounding more and more like a Windows problem. BTW both my and my husband's laptops are Dell so I might try looking there also. Wish I had an answer.

64-bit RAID drivers problem on Qosmio F30 during WinXP installation

I am trying to install Windows XP 64-bit on my Qosmio F30-140, so I used Windows Vista 64-bit RAID drivers. The windows setup loaded the drivers successfully from USB-FDD, but after I choose C: partition to install the windows and the setup started I got the following message " Setup cannot copy the file: KR10N64.sys ".
Please advise .

download the driver again and try to put it on another clean formated floppy disk
put all the files on the root of the floppy disk
and try to reply to this message ;)
Message was edited by: Reaver

Aluminum MacBook 24.GHz and Windows 7 64-bit - NVidia Drivers and kbmgr.exe

I ahve got this mostly working, except I cannot install any Nvidia drivers - windows 7 insists they are not compatible.
I installed the laptopvideo2go 9400M 64-bit Nvidia drivers via modded inf, Windows identifies them as drivers which match my video card, but when I try to change to that driver, Windows says those drivers are not compatible with the OS.
Anyone figure out a workaround?
Also, kbmgr.exe does not work at all, no errors, nothing happens when I double-click on it.

Yesterday, I set up rEFIt boot loader and tried to boot from the DVD. There were a list of errors. Probably the problem is my external DVD drive, but SL was installed using the very one. Continue my investigation ...
Message was edited by: mirage.jee

Windows 7 64bit & Aceeca USB Drivers & PdaNet

Has anyone been successful in using the Aceeca USB drivers with PdaNet 4.1.2 on Windows 7 64bit?
I believe this should work, but it doesn't. I have place two support messages into June Fabrics about this over the last two weeks and got no response. The June Fabrics FAQ says:
Does PdaNet support 64 bit system? On 64 bit Vista I received installation error "UpdateDriverForPlugAndPlayDevices err=-536870347".
PdaNet does not work on 64 bit system due to lack of 64 bit USB support from Palm's HotSync Manager.
My device is a Treo 755p. I can successfully HotSync via both bluetooth and USB/64bit-Aceeca on Windows 7 64bit. I have got a trial version of USBModem by Mobile-Stream.com to work for Internet tethering, but I just don't understand why PdaNet won't install given the installed Aceeca drivers and June Fabrics FAQ.
Post relates to: Treo 755p (Verizon)

>got a trial version of USBModem by Mobile-Stream.com to work
Can you provide a link to a detail description of how to get it to work -- I can't seem to do it.
Do you need the 20/month additional option from Verizon?

XP SP3: USB-drivers won't install

I just got myself a 8900 Curve and want to connect it to my PC to transfer data, Sync it, update the OS...
Mass Storage Device through the BB works perfectly, but the PC Sync Tool not.
Windows XP SP3 detects New Hardware but can't find drivers.
In Device Manager there's an USB Device with exclamation mark.
I tried installing (and uninstalling) from Desktop Manager 4.6 to 6.0 and even installed the seperate USB-drivers, but no luck.
I tried pointing out to the C:\Program Files\Common Files\Research In Motion\USB Drivers, Windows can't find the appropriate drivers.
What oh what can I do?
I searched through this forum but no luck finding an answer.

Hi Dman,
When trying to install the drivers, are there any errors when it stops the install?
Has this printer worked on any other systems, including your OS X machine?

Windows 7 only gives me active USB ports when the DISABLE DRIVER SIGNATURE ENFORCEMENT is selected during system boot

I can only use the computer if I press 8 and select "DISABLE DRIVER SIGNATURE ENFORCEMENT". Without this, the system comes up OK but I do not have access to the keyboard and mouse. If I select any other boot option the system boots up but I am
unable to login since neither the keyboard nor the mouse is working.
The Device Manager is clean. All drivers work and have digital signatures. I tried to use local group policy editor to disable digital signature enforcement but was not able to make any difference. The OS is 64-bit Windows 7 Professional with Service Pack
1 and latest updates.
The system includes a WD USB 3.0 card, which I have been using for over 3 years without any problem. I recently (3 days ago) updated the WD SmartWare for Windows software. It seems that my problem coincides with this update. Since then, I removed WD SmartWare
and Installation software and restored the Registry to its previous restore point however the problem still exists.
As per SIGVERIF the not signed drivers are:
difxapi.dll              7/13/2009      2.1.0.0          Not Signed
usbccgp.sys              9/4/2013       6.1.7601.18251      Not Signed
usbd.sys                 9/4/2013       6.1.7601.18251      Not Signed
usbehci.sys              9/4/2013       6.1.7601.18251      Not Signed
usbhub.sys               9/4/2013       6.1.7601.18251      Not Signed
usbport.sys              9/4/2013       6.1.7601.18251      Not Signed
usbuhci.sys              9/4/2013       6.1.7601.18251      Not Signed
The problem appears to be related to the not signed USB drivers.
The current USB 3.0 host controller is from Renesas Electronics (ver. 2.1.39.0). According to the Device Manager it is digitally signed and working fine.
Does anyone know how to fix this problem?
Thanks,
DC

This issue was fixed on my PC as follows.
1) Taking ownership of the above usb*.sys files in the drivers folder
2) renaming them to usb*.sysold
3) Using Device Manager to uninstall all USB devices with the yellow warning ! next to them
4) Doing a Scan for Hardware changes via the Device Manager toolbar and then waiting a few moments whilst the USB devices are re-installed with signed drivers.
Hope this helps you....
usb drivers files in my drivers folder after the above process:
12/02/2013 04:12            19,968 usb8023.sys
21/11/2010 03:24            32,896 USBCAMD2.sys
27/11/2013 01:41            99,840 usbccgp.sys
12/07/2013 10:41           100,864 usbcir.sys
27/11/2013 01:41             7,808 usbd.sys
27/11/2013 01:41            53,248 usbehci.sys
25/03/2011 03:29            52,736 usbehci.sysold
27/11/2013 01:41           343,040 usbhub.sys
25/03/2011 03:29           343,040 usbhub.sysold
25/03/2011 03:29            25,600 usbohci.sys
27/11/2013 01:41           325,120 usbport.sys
25/03/2011 03:29           325,120 usbport.sysold
14/07/2009 00:38            25,088 usbprint.sysold
11/03/2011 04:37            91,648 USBSTOR.SYS
25/03/2011 03:29            30,720 usbuhci.sys
21/11/2010 03:23           184,960 usbvideo.sys
              19 File(s)      2,783,104 bytes
The .sysold files are the ones I renamed, I think also renamed the usbccgp.sys - but accidentally deleted it after the rename..

Installing LR 3.6 trashed all USB drivers; now installed LR3.5 won't open. Help!

Downloaded LR 3.6 yesterday. Installed. (To upgrade from LR 3.5). It damaged all USB drivers on my PC (XP Pro 32 bit). Still working with Dell tech support to resolve. Now installed LR 3.5 will not open. After system restore to day before yesterday, message that "Adobe AIR is damaged" . What is AIR??? How do I get LR back up & running right?

Adobe AIR is a cross-operating system runtime environment. Try downloading and installing it from here.
Beat

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and preferences but no sound from mixer to iMac. Need help.

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and Preferences but I can't get no sound from mixer to iMac only sound from iMac to mixer. I only can record sound using microphone line in. Please help.

Eric,
Thanks for your reply. Realtek audio works only in playback. There is a stereo mix in the mixer but the recording controls are not operable with no sliders in the mixer for any recording option. Slider controls appear to be grayed out. Can't figure out how to enable them. Downloaded newest drivers to no avail.
The M Audio control panel has no apparent option for recording stereo mix. Adobe ignores the sound from the DVD or CD and shows flatline.
I'm trying to record the sound from the DVD not rip the track.
When I go to Audio Driver Setup and select Audition 3.0 windows sound, there is no input device installed.
I'm thinking of going back to a decent internal Soundblaster card like I have on my 8 year old machine I am replacing.

Windows Vista - Sound Blaster 24 Bit Usb - No Microphone Playback Real Time Kara

Hi,
I don't no if this problem was just discussed in another thread, if so please giveme simply the link...
I'm Italian, so sorry for my poor english or bad translation...
PC: Laptop, "Toshiba Satellite A 200 24E"
OS: "Windows Vista Home Premium Service Pack " - All update done.
Dev.: "External Sound Blaster 24 Bit Usb" - Driver downloaded from Creative Web Site
At the very beginning I tried the internal Sound Card (Realtek) to do karaoke in spare time, but couldn't hear anything coming from Microphone. So I tried to buy an external sound card. The result is the same.
On "Record Device" I can see the Microphone Device, the level is on top, when I speak in the microphone I can see the green bar light up, if I record my voice I can hear myself when I playback, but no sound in real time.
I read that a lot of people have similar problems, but everone solves in a different manner...
I tried:
- I read in other forums advices about to do something like unmute microphone on "Audio playback devices" >> "Speaker" >> "Levels", but I don't see any checkbox, I can see only Speaker Level Bar...
- As read in other websites, to add a registry key (something like EnableInputMonitor in a specific path), but nothing changes. I cannot find other Device, not in Playback Devices, and not in Record Devices.
Please help, all was great with the same microphone, on old Packard Bell Laptop, old Sound Blaster mp3+ usb, and old Windows Xp.
If no solution, I 'm going on buy an old laptop with Windows xp, or an external Mixer, but I'm disappointed on spending more money...

well ?

USB drivers for Win XP K7T266 Pro

Hello,
i was wondering if someone could direct me to the Windows XP professional drivers for my USB ports. I am using a MSI mainboard with the VIA K7T266 Pro chipset. Whenever windows restarts it attempts to install the drivers. It says that the "data" was "invalid". I have tried downloading the service pack and it did not recognise the USB drivers and i cannot download these drivers from the MSI site manually. I have also tried using the live update function on the MSI site.
Can i get another round of applause for windows XP! what a great product!!! :(
Please help....i need to install my new USB modem and its driving me crazy.
Thanks

Hi,
It depends on the type of board you have.
If it's the K7T266pro V1 then you better buy a PCI USB card as the ports give problems at 133FSB anyway.
If it's the K7T266pro2 V2 then you need indeed SP1 for XP and let the ports redetect.
The V1 board has a serious USB problem at FSB133 and can't be solved by BIOS or drivers.
Only a PCI card or lowering the CPU-FSB can solve it.
The V1 board is very old and only a few have been sold a long time ago and was quickly replaced when the problem was discovered.

Pavilion zd7058cl. USB drivers not installing.

When I re-installed my XP Home OS It did not load the USB drivers. I use USB alot and really need the drivers. Thanks to anyone that knows where I can get them.
This question was solved.
View Solution.

You might have an old version of XP Home. You have to have SP2 or higher for usb 2.0 support. Try installing all the Microsoft Updates, including SP 2 and SP3 and see if that helps.

64-Bit USB Drivers: WHEN????????????

Similar Messages

Maybe you are looking for