6500 slide txt message poblem

hi i hope someone can help.
When i go to send a txt message via create message i get to select the recipients number in the contacts list but when i go to add it the phone switches itself off and goes back to the start up screen.If i enter the number manualy it will send and also if i bring the name up via contacts and select send message i will also send the txt.
This is very confusing

I think this is a bug.
Can you try and return the phone for a new fixed one as your one is not working as it should.
Nokia N95
V 20.0.015
0546553

Similar Messages

  • 6500 Slide Limitations on Message Recepients

    Hello,
    I had used N72 and then shifted to 6500 Slide recently.
    What annoys me is there is a limitation of 20 receipients for a text message.
    Even if my mailer group is more than 20 it accepts only 20 recepients.
    My software is 4.84 and i am facing Handset HANG during call.
    This is very sad part of 6500.
    Any solution available for this.
    Prashant
    Moderator note: Contact number removed.
    Message Edited by dazz19 on 03-Jun-2008 06:50 AM

    You could try turning the phone off, take the back cover off, remove the battery,memo card and the sim card. Wait approximately 10 mins then put the SIM card and battery,memo card back in, replace cover and turn the phone back on.
    dont attempt a self fix take it to a nokia care centre to be fixed
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • 6500 slide - how to have the message tone silent b...

    So frustrating.
    I've tried all teh profiles and carefully made sure that the message tone is off, and then what do you know - beep beep !
    I work in an open plan office and this is not a good thing to have happen.
    Never had this problem with any phone before.
    Reading on here - I think it may be a software problem and I just need to connect and update it ?
    Can anyone confirm that they have had the same problem and it was fixed like this ?
    Thanks !

    further to my earlier posts I have now been advised by my providers technical department (and I must say very pleased that someone actually spoke sense to me and was very helpful, thanks "3" Repairs) that the problem is a "known issue" with the 6500 slide. Apparently some pin on the back is meant to touch something on the phone memory like a reset button, but often it does not, so any profile changes you make are forgotten and it resets to default. So why have Nokia not resolved this?? All very annoying when your siting in a meeting thinking phone on silent, then suddenly, all singing and dancing!!!!!!

  • Text templates (6500 slide)

    Hi there, just got my Nokia 6500 slide 2 days ago and i think it's great, however i can't figure out a way to edit the existing text templates or to add new ones.
    Thanks in advance.

    You make your template like making a txt message to send but instead of sending your txt message you go to Save and then As Template.
    Then the message you just did is added to the Template folder for you to use

  • Txt messaging and vibrate

    Hey guys,
    I have just got a 6220. I have a  few questions if anyone could answer them.
    1: With txt messaging is it possible to have the contacts set up like my nokia 6500 slide.
    i.e when clicking on the TO button it comes up with a list of : Recently used, Favorites, contacts etc..... at the moment it just goes to all of my contacts which results in wasted time in having to try and find the 15 pple i txt most.
    2: Is it possible to get smileys on this phone ?? my nokia 6500 had a whole bunch and this phone only seems to have one after pressing the 1 key repeatedly ... i love my smiley faces and want them back (having to type them out is to slow)
    3: how to i change the vibrate to vibrate for longer and stronger. on receiving a txt message it vibrates for a second (the vibe seems very weak as well !!) so i always miss calls and txts when on silent mode !!!
    thanks for all the help !!
    glstudent

    Hi there,
    Can't help you with the first one, but here are answers to Questions 2 & 3:
    Q2. Smiley's on S60 phones is currently only available via a 3rd party application, please read this post for more information:
    /discussions/board/message?board.id=smartphones&message.id=127635&query.id=88577#M127635
    Q3. Vibration is linked to your alert tone - if you pick a slightly longer alert tone, the vibration does extend.
    Cheers,
    travla
    If you found this post helpful, please click on the green "Kudos!" star. Cheers!

  • Problem with Contacts for 6500 slide

    I recently bought a Nokia 6500 slide and i`m very pleased, except one thing.
    I used to have some other phones, and all my contacts were on the memory of that phone (not on the SIM).
    For me to have my contacts on the 6500 slide, i had to move all those contacts on the sim, then insert the sim into the 6500 slide and move them again from there to the phone memory (i hate having my contacts on the sim couse i can't add any aditional info).
    Ok, so.. after i moved all my contacts to the phone memory, i saw that from about 200 contacts, i only have about 20. At first i thought "ok, there was a problem with the moving process and i lost them all..." I was just about getting over this, when I realized that those numbers that I lost are still in there, but i can't see them.
    If I manualy enter a number of a contact that don't show in my Contacts List, when it dials, the number appears on the screen. Same if that contact calls me. I can't see them in the Contact List tho.
    It's like there are hidden or something..
    I tried changing the settings so that i can see only the contacts in the SIM (in which case, none apear), only in the phone (only those 20 or so appear) or showing both (still, only 20 or so appear).
    The contacts are not in the SIM couse i tried putting the sim back in the old phone, and it's empty.
    They must be somewhere in the phone. Is there a hidden setting that i can find, that allows me to see those contacts that I thought I lost? It's very annoying to wait till someone calls me so I can add his number again in the phonebook
    To be more specific, let me give an example.
    Let's say I had contact "John" with the number "12345678". Now I can't see it anymore.
    If i dial 12345678 and then hit "Call", it apears like "Calling John"
    If John calls me, it apears like "John" on the screen.
    If i try to add John to the phone book I get a message like "A name is already entered for that number"
    It's like... all the contacts are already there, but I can't see them
    Can someone help me please... I`m really desperate

    Hello and welcome to the forums;
    First, you mention the error references a SIM card, however your profile says you have a Sprint device. A small problem there, and I would like to clear up any confusion as which device you have: a Sprint CDMA device, or one with a SIM card.
    Second, have you tried restarting your device? Hold down the power button and move the ringer mute switch next to it back and forth 3 times, then wait 4-5 seconds for the device to restart by itself.
    Try this, and let us know what happens.
    TreoAide

  • Urgent help please NOKIA 6500 SLIDE

    for some stupid reason , i was told my memory was full and to delete some data or whatever, stupidly i did and now i have no tones, pictures, and lots of sentimental messages etc. !i have just got the stupid phone , its a nokia 6500 slide and is now practically useless.
    please help me, ill never drink again !!!!!!!!!!!!
    Message Edited by jintyj on 25-Feb-2008 09:28 PM

    Think I've worked it out now.. i had it on gmt, but i'd forgotton we are on british summer time so needed to add an hour for daylight saving.
    Thanks for your help.
    ah you beat me to it about daylight saving. Thanks againMessage Edited by gillh2 on 12-Oct-200711:08 AM
    Message Edited by gillh2 on 12-Oct-200711:09 AM

  • Need Help for Nokia 6500 slide

    Hi all I'm A new Guy here ,
    But I do really need help for hard reset my phone
    I already try *#7073# But It doesn't work ,
    If Anybody know to make a hard reset please help

    rwss wrote:
    I'v got te same problem with my 6500 Slide, is there a button combination that we have to press
    to hard reset the 6500 Slide?!
    How does the 6500 slide hard reset?
    That's simple.
    All you have to do is:
    From MENU goto SETTINGS, When there scroll down and select 'Restore Factory Setting'.
    There are two options in there:
    "Restore Settings only"
    and
    "Restore all"
    Select "Restore All"
    When done the phone will delete every thing on the Phone memory(C:\)(contacts,picture,messages etc)
    and also restore phone to its original settings and will restart.
    This proceedure is mostly common on S40 phone.
    Hope this explain and solve the problem.

  • Nokia 6500 slide - SMS writing language (chinese) ...

    Hi,
    Seek helps from all experts, I have recently updated my Nokia 6500 Slide firmware to 8.4. but unfortunately it cause some changes to my phone as the SMS writing language for Chinese characters has disappeared. Anyone could advise me on how to install it back to my phone?
    Thanks.
    Regards,
    Stevenzder

    the following sticky post should answer your question about why your chinese language disappeared.
    /discussions/board/message?board.id=swupdate&thread.id=29982
    you can visit the nearest nokia care point to have that additonal language added to phone.
    Fear not those who argue but those who dodge

  • Nokia 6500s1 (6500 Slide) RM-240 Firmware v10.00

    Hi, I've noticed that the new firmware version 10.00
    for the Nokia 6500s1 (6500 Slide) RM-240 is out.
    Does anyone have an idea what is new in this version
    and they've fixed in this version?

    It's still not listed at the site, butt it's out there.
    I've got the update by using nokia software updater.
    When *#0000# is entered in the main screen of
    my nokia 6500 slide it comes with a screen that reports this:
    Nokia 6500s-1
    V 10.00
    06-03-09
    RM-240
    (C)Nokia
    Variant: 00.00
    Virtual Variant:
    No virtual variant
    Language:
    V 10.00
    06-03-09
    RM-240
    (c)Nokia
    C
    See also the attachments.
    It's still a pitty that there is still no information aviable for
    this firmware version, they need to be more open about it.
    Message Edited by rwss on 27-Jul-2009 02:42 PM
    Attachments:
    DSC00434.JPG ‏1795 KB
    DSC00435.JPG ‏1793 KB

  • 6500 Slide Text Freeze

    Hi all,
    I'm getting a problem with my 6500 slide, whereby the 2 blue buttons below the screen (the ones for options and clear/exit) just stop responding when I write a text message.
    There doesn't seem to be any common factor that causes it, the only way i've found to get the buttons to work again is by closing and then re-opening the slide - this works 95% of the time.
    I held on for the update, and put on v4.81 when it was release but still have the same issue.
    Anyone else had this problem and found a resolution?
    Thanks
    Rob

    Probably a hardware fault, I think you should take it to a Nokia Care Point. Repair will be free if your device is under warranty.
    Mobile Royale - Latest News, Reviews and Software for Mobiles
    Aero Everyday - Aviation News and Insights
    GoMobile Forums-The best mobile technology discussions
    Please visit http://alifeofmisery.blogspot.com or www.miserylife.tk and help someone smile.
    Dreaming of a 5320XpressMusic - 128MB RAM makes up for the 2MP cam !

  • 6500 slide issues (list it here)

    I hope to create a single thread to list and discuss all issues users are having with their 6500 slide.
    Let me start with mine:
    V 0.380
    10-09-07
    RM-240
    Variant: 255.02
    1. sometimes the buttons (numbers or options) becomes unrepsonsive; give it a wait and it works again.
    2. Ringtone and Message Alert tone goes back to default; or display some weird alphabet+numbers after a while. And i had to manually set back my favourite ringtone for both calls and message. This happens to the default 'General' and renaming MyStyle1.
    3. do you find the battery lasting? not for me.

    I got my 6500 slide 3 days ago and I have the same firmware version as you - as well as some of the same problems.
    The screen/buttons hang, and I have to wait or press the end button repeatedly to get back to the main screen and start all over again. A few times I had to repeatedly push the unlock + * buttons to unlock the phone. I also have problems viewing my contact info in the PC Suite...
    And I have scratches on the "2" key on the number pad. Is this just "wear" or is it a defect, as I see this problem reported by many others. I'd like to know so that I don't look like I have OCD when I go to the store for an exchange.

  • Unlock my Nokia 6500 slide

    good evening,
    I bought a mobile (Nokia 6500 slide) with SFR in France. I missed six months and I wanted to unblock it but the code to disable the restriction, is not good and he told me that this is a problem that needs to be addressed at Nokia. So I would like to know steps to unblock it, thank you.
    Best regards
    Moderator Note: Imei number removed
    Message Edited by prodigy on 11-Jul-2009 01:54 AM

    I'm aware that SFR told you to contact Nokia, and they told you wrong.
    What you should be aware of is the fact that mobile network operators do not hesitate to lie to their clients to make themselves look clean and shift the blame for any wrongdoing to the manufacturer.
    If SFR got the restriction code wrong it is up to them to try again and get it right. SFR sending you to Nokia is not going to help because Nokia cannot generate the restriction code. These codes are the sole responsibility of the operators who enforce the SIM-lock, and the operators know this full well.
    Try SFR again, but don't let them send you back to Nokia. Be persistent. If the front-line customer service is unable to help then ask to have the matter escalated to someone with half a clue who might actually know what he or she is talking about.
    Also bear in mind that SFR are crooks as far as I'm concerned. They've tried everything in the book to extort money from me and succeeded on one occasion (charging me €7.50 for a PUK code given over the phone when no such code was given, I had the SIM-lock lifted from my phone more than 6 months after taking out the contract and it was supposed to be free).
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Flip/slide tone nokia 6500 slide

    hy, i need some help :-p, is it possible when i slide open/close my nokia 6500 slide to have a tone??? (ps: i tried with "Carbide.ui Theme Edition 3.4" to edit some themes to add different sound, but nothing )(and i have eanble other sound :-( ).i have tride a lot of themes ... nothing... no sound on flip slide!!! i even reinstalled the soft v 8.30!!! nothing!!!please help...

    hi mate
    i will be very thankful if you please send me this theme with slide tone...
    chase.
    Moderator's note: Email address removed as it is unwise to post a personal email address on a public forum.
    Message Edited by concordia on 15-May-2009 10:39 AM

  • Volume on alert tones 6500 slide

    Hi I've recently changed from a 6300 to 6500 slide and overall I'm really pleased with it. However, the volume for the message alert tones is really loud. On the 6500 it the volume is really loud and it had the added benefit of flashing. The software on the 6500 is V04.84. Anybody any idea how I can increase the message alert volume. I have the ringtone volume set at maximum and this is great.

    Somewhat embarrasing, but I figure post this so others can use it - have figured it out... open the gallery of alert tones and start playing them, then use the volume adjustment keys on the side of the phone to increase their volume while they are playing. This will then affect the volume they play at when actually selected as the alert tone.

Maybe you are looking for