7.0 question on IMG entry Define Acct Ident for Multi BP

IMG  t-code CRMC_IC_BPPROFMUL in the Profile Default select Search Tabs "Account Roles" choosing Account BP Business Partner (sequence 10) then choosing account roles are config entries
CRM000     Sold-To Party   seq 10
CRM006     Consumer        seq 20
In my Business Role I have assigned profile Default in BPIDENT_MULTIPLE.
But in the ic agent account search we were only getting CRM000 in the results, shouldn't this config entry find both CRM000 & CRM006 accounts?
If we set CRM006 to the lower seq then we found the CRM006 but not the CRM000 acounts.
Our developer was able to enhance the class to get both the CRM000 and CRM006 BP's but trying to verify if we should have found both the CRM000 & CRM0006 without the enhancement?
Thanks,

Hi Glenn,
I tried that scenario on mine using "DEFAULT" for multiple bp which is set up the same way as you describe, and if I select Account Role "All" from the Account search, I get results of partners with role Sold-To Party and role Consumer. Are you searching based on account name?
Sincerely,
Glenn
Glenn Abel
Covington Creative
www.covingtoncreative.com

Similar Messages

  • Customer fields do not display in Define Field Groups for Cust. Fields IMG

    I am customizing to display cusotmer fields in cporjects IMG actviity 'Define Field Groups for Customer Fields'.
    I am able to see the main tab in object category and multiple sub tabs in it. However customer fields that have been added by Enhance database tables in DPO are not shown or visible in the sub tabs.
    Am I missing any config? Please let me know.
    Senthil

    Hi Senthil,
    If you can see the tabs and not the fields, pl check if you have covered field control for these newly created custom fields.
    To have field control for these fields, you will have to copy the standard SAP provided field control, include the structure that has you custom fields and give it authorizations etc as per your requirement.
    Pl read carefully the documentation provided with field control.
    Refer note 947963 - Setting up field control
    Regards,
    Reema.

  • Use of Vendor and Customer in 'Define Shipping Data for Storage Location"

    Under the stock transfer order configuration, there is a IMG step <b>"Define Shipping Data for Storage Location".</b>
    In this at storage location level, we can assign, sales org/distribution channel, division and VENDOR and CUSTOMER to storage location.
    The customer number is used a sold-to-party in outbound deliveries.
    <b>But I am not able to figure out what's the use of VENDOR number we are specifying in this step.</b>
    If I am assiging the VENDOR Number here to every storage location, then when I am creating cross-company code Stock transport order, which vendor code I will select the one assigned to PLANT or one Assigned to Storage location.
    <b>Also I need to know what vendor account group I will use for creating this storage location vendor.</b>  I have more than one storage locations) under one plant. Soif I used account group as "0007" plant, SAP doesn't allow me to assigne one plant code to 2 vendors and in vendor master on 'additional purchasing data' screen I am not seeing storage location field, it has only 'PLANT' field.
    <b>So I need to know-
    1. Which account group to use for creating storage location vendor
    2. What's the ultimaye use of this vendor code
    3. What vendor # I will use while creating cross-company PO (one for plant or one for storage location.</b>
    Thanks

    Hi,
    Define Shipping Data
    Here in this step you maintain the customer number of the receiving plant. This customer number is used in SD shipping processing to identify the goods recipient (ship-to party) if stock transfer to be carried out with an SD delivery
    A goods receipt can be planned in the receiving plant.
    You can enter a vendor (transport vendor) in the stock transport order
    In IMG step "Define Shipping Data for Storage Location".
    You can assign sales org/distribution channel, division and VENDOR and CUSTOMER to storage location through Plant only.Means this Vendor is created for entering in the STO .This vendor is created for the the Plant (Supplying Plant)so as u can create STO.
    Rewards If usful
    Regards
    Sanjay L

  • Acct determination for Account-assigned purchase order with keys not define

    Hi,
    I'm trying to post an IDOC of type BBPIV through XI to an R/3 system.
    The posted idoc in R/3 is in status 51 (Application document not posted) with the error message "Acct determination for Account-assigned purchase order with keys not defined in chart of acts WP2P"
    As per my understanding this is something related to FI.
    Long text of the error is "The system cannot generate an automatic posting because there is no account determination defined for Account-assigned purchase order with keys   in chart of accounts WP2P.
    Correct the account determination for Account-assigned purchase order"
    Please help me how to solve this.
    Regards,
    Rashmi

    Hiya,
    This looks like its a MM posting / transaction.
    You need to go to OBYC and maintain the account assignment. If you provide the business scenario (GR into Stock, Subcontracting, etc.) for the process, I may be able to help.
    VKOA is for SD account assignment and I don't believe you can use that here.
    Cheers.

  • How to define default subtypes for Infotype 0105 on entry

    Hello;
      I have spend an entire day trying to look into PA configuration to determin how to make specific Subtype of the 0105 Communication Infotype automatically appear when an HR person is entering in a new employee.
    Currently we have the 0001, 0010, and ADP subtypes automatically appear in the Communication Infotype screen when the person is entering in a new employee.  I was asked to create three new Subtypes for Infortype 0105 and have these new subtypes automatically appear on the data entry screen for Infotype 0105.
    I can not find anywhere in configuration how to do this.  I ahve burnt an entire day searching configuration and have about had it with this garbage.
    Can someone please point me to specific spot in configuration where these subtypes of and Infotype can be identified as default data entry screens.
    I would greatly appreciate any help ... since I am not a HR Configurator ... just a plain old ABAP'er who has lost our configurators.
    Scott.

    Hi Scott,
    To create subtypes follow:
    Tcode: SPRO
    Path: Personnel Management>Personnel Administration>Communication>Create Communication Types
    Half the job is done. Then include those subtypes in your hiring action. To do so:
    Tcode: SPRO
    Path: Personnel Management>Personnel Administration>Customizing Procedures>Actions>Define infogroups>Info group
    Select your hiring infogroup and create new entries with operation INS for 105 and the three subtypes.
    You are all set!
    Cheers,
    Donnie

  • LSMW input method error-No Customizing entry defined for period indicator Y in logon language

    Hi,
    I am creating one material through direct input method and its showing error '
    No Customizing entry defined for period indicator Y in logon language'.
    I am passing PERKZ ( periodic indicator ) as blank from file.
    But when i am creating in foreground its automatically taking value 'M' and creating the material.
    And also when i hardcode the value 'M' in LSMW then also its showing same error.
    Can anyone please help urgently?
    BR
    Sumeet

    Check in O02K what is maintained.  As per your error message, External Period Indicator "Y" is missing for that logon language.
    G. Lakshmipathi

  • Acct determination for Materials management small differences with keys

    Dear all,
    While posting a document in MIRO, it throws error as 'Acct determination for Materials management small differences with keys not defined in ch/acts'.
    Please advise a solution to rectify this error.
    Regards,
    Vijay

    Hi,
    It seems due to small differences between debit and credit side you are not able to post the document price differences). Check all the data to create an entry first and  Check the data format. Can you check  in OBYC is there a way  to  have a transaction DIF (Materials management small differences) post to different GL accounts based on valaution class (plant)?

  • Same number of work flow entries under "Approval" link for each user

    Hi All,
    We are implementing SRM 5.0 .
    The problem we are facing is that when we test the service BBPSTART , the number of work flow entries in the inbox for all users is same .
    We created a new user on SRM and tested BBPSTART with this user...it shows the same number of work flow entries in the inbox..
    What is the problem?
    Thanks & Regards,
    Anubhav

    Hi Masa,
    SPRO->SAP Reference IMG->Supplier Relationship Management->SRM Server->Cross-Application Basic Settings->SAP Business Workflow->Activate Standard Taks
    Activate Standard Tasks
    In this activity, you start a background report that defines certain tasks within the workflows of Enterprise Buyer as standard tasks. Any user can perform standard tasks, such as "Approve User Master Record". You use the workflow definition to narrow down who can actually perform the task. For example, in the case of approval of user master records, this depends on the organizational unit to which the new user master record belongs.
    You must perform this activity during the initialization of the Enterprise Buyer system, otherwise the SAP Business Workflow cannot determine who the approver should be.
    Is it somehow related to my problem?
    Regards,
    Anubhav

  • Best Way to Define Employee Numbering For Different Countries

    HI all
    I am working on for a project which will be for Multiple countries.But Each country has different Instances.Now the questions is What could be the Best way to Define Employee numbering for all the Regions ? As for as My knowledge goes It would be Number prefixed by Country.Then How we can have Alpha numeric in employee Coding ? We need to have Fast Formula to Ahieve this task.If any body has come across this scenario please share your thoughts .Any thoughts are greatly Appreciated.
    Cheers
    Kumar cs

    If you have each country on a different instance and you want employees to retain their employee number on transfer between countries, I believe you have two options:
    i) Use manual numbering. One recent change to the system is that you can update the numbering profile from Auto to Manual and back to Auto again. So you could potentially leverage this manual workaround when a cross BG transfer happens.
    ii) Bespoke module to export all emp numbers into a 'central repository', e.g., flat file, that can be accessed by all instances, imported regularly and then referenced by your Fast Formula. You would also need processing to determine when a person is a transfer from another BG or a new hire; probably have to be some control field on flex. Basically, this is a requirement made difficult by the decision to host each legislation on a different instance; I would never recommend clients to go down this route but I guess it's too late in your case.
    If cross BG transfers are not common, e.g., less than 5 a week, I would recommend option 1.

  • One question about Pricing and Conditions puzzle me for a long time!

    One question about Pricing and Conditions puzzle me for a long time.I take one example to explain my question:
    1-First,my sale order use pricing procedure RVAA01.
    2-Next,the pricing procedure RVAA01 have some condition type,such as EK01(Actual Costs),PR00(Price)....,and so on.
    3-Next,the condition type PR00 define the Access Sequences PR00 as it's Access Sequences.
    4-Next,the Access Sequences PR00 have some Condition tables,such as:
         table 118 : "Empties" Prices (Material-Dependent)
         table 5 : Customer/Material
         table 6 : Price List Type/Currency/Material
         table 4 : Material
    5-Next,I need to maintain Condition tables's Records.Such as the table 5(Customer/Material).I guess the sap would supply one screen for me to input the data of table 5.At this screen,the sap would ask me to select one table,such as table 5.When I select the table 5,the sap would go to the screen to let me input the data of table 5.But when I use the T-CODE VK31 or VK32 to maintain Condition tables's Record,I found it's total different from my guess:
    A-First,I can not found one place for me to open the table,such as table 5,to let me input the data?
    B-Second,For example,when I select the VK31->Discounts/Surcharges->By Customer/Material,the sap show the grid view at the right side.At the each line of the grid view,you need to select the Condition Type at the first field.And this make me confused very much.Why the sap need me to select one Condition Type but not the Condition table?To the normal logic,it ought not to select Condition table but not the Condition Type!
    Dear all,I'm a new one in sd.May be this is a very stupid question.But it did puzzle me for a long time.If any one can  explain this question in detail and let me understand the concept,I will appreciate him/her very much.Thank you.

    Hi,
    You said that you are using the T.codes VK31 or VK32.
    These transaction codes are used to enter condition records for standard condition types. As you can see a grid left side having all the standard condition types like price, discounts, taxes, frieghts.
    Pl check using T.code VK11 OR VK12 (change mode)
    Here you can enter the required condition type, in the intial screen. (like PR00, MWST, K004, K005 .....etc)
    After giving the condition type, press enter or click on Combinations icon on top of the screen. Then you can see all the condition tables which you maintained for that condition type. Like as you said table 118, table 5, table 6 and table 4.
    You can select any table and press enter, then you can go into the screen in which you have all the field cataglogues you maintained for that table. For example you selected combination of Customer/Material (table 5) then after you press enter then you can see customer field on top, and material fields.
    You can give all the required values and save the conditon record.
    Hope this is clear.
    REWARD IF HELPFUL.
    Regards,
    praveen

  • Define sensitive fields for vendor master record

    Hello,
    Wer are on SAP ECC 6.0 Customer wants to define sensitive fields for dual control. I have defined the bankaccount number as a sensitive field but I do not know how I need to define the other settings. Can anybody helpe me with that ? Where f.i do I define the persons who will confirm the changes ? n short which customzing steps do I need to follow to implment the sensitive fields for dual control.
    Thanks as ever!!

    Hi,
    You should not allow any user, whatever may be his or her position in the Organization with SAP_ALL and SAP_NEW profiles. It is totally against the Segregation of Duties and there is every possibility for making financial fradulent activities. Proper security approach is very much necessary in order give them the authorization on "NEED TO KNOW" Basis.
    Regarding your question of sending mail, there is no functionality as such in Standard SAP. However, by taking help from ABAPer and schedule in the non-peak hours (night time) to generate mails for the approvals of today.
    For your other question, which fields are to be kept Sensitive field, normally you can keep PAYMENT TERMS and PAYMENT METHODS as sensitive fields. You can also select other fields based on your business requirement.
    Please let me know if you need further information.
    Regards,
    Ravi
    Edited by: Ravi Sankar Venna on Jan 27, 2009 8:40 PM

  • How to define FORMAL parameters for TABLES in OOPS?

    Hello Experts,
    Below is the custom code, would like to put in a user-exit
    PERFORM my_routine
    IN PROGRAM my_report
    TABLES standard_sap_vbap_tab
    USING standard_sap_variable
    CHAGING standard_sap_variable
    Pls. let me know How to write the FORM in perspective of data objects defination in OOPS for the above routine.
    FORM here_pl_let_me_know_how_to_define_the_data_objects
    ENDFORM.
    Thank you
    Moderator message: please search for available information/documentation before asking.
    Edited by: Thomas Zloch on Nov 10, 2010 3:40 PM

    This is a very basic question. F1 help on statement form will do.

  • Problem with No entry in table T591B for 0015 08 E101

    Hi all,
    This is our first year using SAP and we're approaching our first Year End and so want to make the E Wage Types available for us in IT0015, E121 is already OK and I can enter data in IT0015 for that WT no problem. I've added WT E101 to the 0015 Additional Payments in the IMG and it shows as being allowed for IT0015, this has created entries in the Permissability, etc. in the IMG and I've updated permisability for the ESG to allow for all ESG / PS, etc. - so all looks fine when I work through the steps for Additional Payments in the IMG, but when I try to save E101 in IT0015 I get a message about 'No entry in table T591B for 0015 08 E101' .
    When I look at this table it's called 'WT dependent retroactive accounting trigger' and I've not seen it before despite setting up many Wage Types and I can see E121 is in this table but E101 isn't - but I can't see how I can add or copy anything in this table - there are no options. So I'm assuming this is usually auto updated by creating an entry in another table but I have no idea how to find where and can't find any documentation or other forum messages for this table.
    Has anyone else come accross this before or know anything about this table - has anyone else had trouble when wanting to allow E Wage Types to be used for Year End adjustments?
    Thanks in advance for any advice anyone can give me
    Nyree

    Olnly wt configured to be permissibled on a few infotypes (e.g. 0014, 0015, 0267) would need to be configured in V_T591B. The purpose of this is to control whether these wt are allowed to be changed after payroll is already run for the ee.
    All you need to do is maintain this entry through view V_T591B - add entry for wt 'E101'  for infotype 0015 / country '08'. The indicator (V5591B-ABWRU) can be '' (allow change to wt after proll is run), 'X' (warning if change after proll is run), 'E' (hard-error if change after payroll is run) .
    Rgds.

  • No entry in table T503 for "D"

    Hello Experts,
    while trying to hire an employee on the IDES server, the message "No entry in table T503 for (EEgroup) " ... i checked the T503 table (T503K, and V_T503Z via TCode SM30) ... and found my EE groups and subgroups !! (as assigned through IMG) ... but still I get the same error message and i don't know why.
    FYI : I was told that the IDES server is not configurable !! that is , I may not find the expected results that i make on IMG (I may create EEgroups and subgroups, assign them, but still I may not find them as expected!!)
    Note:
      when I choose an employee group (while hiring) and then i try to select EE subgroups, the status bar says that "No Values Found" though i had assigned EEsubgroups to the EEgroups!!
    please tell me what is going on, i am really confused !!
    Thanks in advance.

    Hi,
    1. Create the Emp Group if required through SM30 table T501. If not atleast check your EG.
    2. Create the ESG if required thorugh SM30 table T503K. If already created check your ESG here.
    3. For the combination of your EG and ESG make sure that country 99 (other countries) is ticked in V_T503Z via SM30.
    4. Maintain the Employee attributes in V_503_C via SM30
    In case if your EG or ESG is 01 then make sure that it is ZERO ONE and not O(letter) ONE.
    hope this helps.
    Ajay

  • Entries in table BWOM_SETTINGS for PARAM_NAME = 'OBJSELSIZE '

    Hello All,
    The entries in table BWOM_SETTINGS for PARAM_NAME = 'OBJSELSIZE ' in our ECC system were as follows originally:
    OLTPSOURCE = ''
    PARAM_NAME = 'OBJSELSIZE '
    PARAM_VALUE = 'X'
    At that point we started using delta extarctor 0PM_OM_OPA_2 and it had a very poor performance.
    SAP asked us to implement note 1040072.
    As a result of applying that note, the BWOM_SETTINGS table has 2 entries for PARAM_NAME = OBJSELSIZE.
    1. OLTPSOURCE = ''
    PARAM_NAME = 'OBJSELSIZE '
    PARAM_VALUE = 'X'
    2. OLTPSOURCE = '0PM_OM_OPA_2'
    PARAM_NAME = 'OBJSELSIZE '
    PARAM_VALUE = 'X'
    Things were fine until we added more init selections to another CO extractor, 0CO_OM_OPA_6.
    0CO_OM_OPA_6 deltas were taking around 2 hours for original init selections:
    Fiscal year / period 2007001 2007012
    Fiscal year / period 2008001 2020012
    Controlling Area 3000
    Recently we added more init selections and now selections are :
    Fiscal year / period 2007001 2007012
    Fiscal year / period 2007001 2020012
    Fiscal year / period 2008001 2020012
    Controlling Area 3000
    Controlling Area 4000
    Controlling Area 5000
    The extraction is now taking unacceptably long time, about 15 hours.
    I am not sure if it is because adding more inits.
    I have a feeling the entries in BWOM_SETTINGS for OBJSELSIZE are incorrect.
    According to note 836740 should they be as below?
    OLTPSOURCE = '0CO_OM_OPA_6'
    PARAM_NAME = 'OBJSELSIZE '
    PARAM_VALUE = 'X'
    OLTPSOURCE = '0PM_OM_OPA_2'
    PARAM_NAME = 'OBJSELSIZE'
    PARAM_VALUE= 'X'"
    One more question. If we change the BWOM_SETTINGS entries to as above, will that affect other CO extractors?
    For instance, we use 0CO_OM_CCA_9 very widely and it runs very fast currently. I just want to make sure we dont mess up its performance by modifying the entries in BWOM_SETTINGS. May be add one more entry in BWOM_SETTINGS for 0CO_OM_CCA_9 too?
    Sorry about the lengthy post.
    Any help is greatly appreciated.
    Thank you.

    As stated in [OSS Note 836740 - Delta extractors CO: OBJSELSIZE DataSource specific|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=836740], there should be parameter OBJSELSIZE entries, with a value of X for the following CO DataSources:
    0CO_OM_CCA_9
    0CO_OM_OPA_6
    0CO_OM_ABC_7
    0CO_OM_WBS_6
    0CO_OM_NAE_2
    0CO_OM_NTW_2
    0OC_OM_NWA_2
    The independent entry, where the DataSource is blank, should also be prsent for the OBJSELSIZE parameter with a value of X. [OSS Note 1040072 - 0PM_OM_OPA_2: Poor performance|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1040072] shows that it's also needed for the 0PM_OM_OPA_2 DataSource.
    Your entries for 0CO_OM_OPA6 and 0PM_OM_OPA_2 are correct. You should add 0CO_OM_CCA_9 and any other DataSource in the list above. If they're not listed, they are supposed to be taken care of by the independent entry (DataSource is blank).

Maybe you are looking for