7.01 is still bugged!

When 7.0 became available I immediately installed it - liked the new coverflow thingy. When I went to do something else aswell on my pc it all went downhill - the music played too fast etc etc, so I went back to 6. When 7.01 was announced I installed that - music plays fine (more or less) but now I can't use it because the album cover view doesn't work - my pc freezes (I have a good spec with an X2 cpu!) and I have to reset it manually!
What is going on? If things don't get better I'll be going back to good ole WinAmp.
If anyone has any ideas or workarounds I'd be grateful to read them (tried the minimise thing - no good)!

Although the error message is not exactly the same,
this article might help solving the problem:
Mac OS X 10.3: Repair Disk
Permissions "Disk Utility has lost its connection
with the Disk Management Tool..." alert
Hope this helps.
M
17' iMac 800 MHz, 768
MB RAM, 200 GB HD, DL burner Mac OS X (10.4.7)
iTunes 7.0.1
Thanks for your response. I tried your advice but unfortunately the problem still persists. Any other ideas?
iMac G5 Mac OS X (10.3.9)

Similar Messages

  • Are there still bugs in Elements 4

    Are there still bugs in Elements 4?
    Looking at the feature list I am tempted to buy Elements 4. But I have read many reviews that indicate that it is "bug ridden"- most reviews are dated just after release. Have Adobe fixed the bugs now?
    Advice very welcome...

    Unfortunately you seem to be suffering from what has come to be known in PE4 terms as the "Goldilocks Syndrome". Do you remember when Goldilocks ate the porridge; one was too hot; one was too cold and one was just right. This went on with the beds etc. Well, it seems (from this very forum) that PE4 has a similar problem; if your computer is over specified (even with ALL the latest available drivers installed), it won't run properly; if it is under specified (even with ALL the latest available drivers installed), it also won't run properly, it has to be just right. There are people out there who's computers are just right, as we don't hear from them, obviously.
    See if you can take your copy of PE4 back to the shop (they should have told you that a new one was coming out, well, if they were a good shop) and wait for PE7 which should have all the PE4 bugs worked out. They don't have to do much with the interface as it's already flawless. Very difficult to improve on the best. They just have to make sure it works on E-V-E-R-Y-O-N-E's computer.
    Have a look at Steve's PE7 introduction video's on the Adobe website. That's how a software should work.
    Best of luck.

  • Incorrect Format When Saving Stills - Bug?

    Hi,
    I have a QT movie exported from FCP which I opened in QT Pro 7.2 and tried to export a frame with "Movie to Picture", using Photo-JPEG. The still is always saved in a PICT format. I tried other formats like TIFF but the result is always the same - a PICT format, according to the still's icon and Preview. This issue seems to occur in all QT movies, whether exported from FCP or not.
    Looks like a QT Pro bug to me. I do not have this problem with exporting frames from FCP.

    Does this mean that the export is actually in the specified format despite its icon and or what?
    The graphic is stored as a PCT file (i.e., in the PCT file format). The Photo-JPEG, TIFF, None, etc. drop down box allows you to set the "Compression" format for the data. For instance, if you select none, the saved PCT file will be on the order of 1.2 MBs. On the other hand, if you select the the Photo-JPEG option, the saved PCT file will be on the order of 120 KBs or 1/10th the file size.
    However, no matter which compression format is used, the file will expand to its umcompressed size if dropped/added back to the movie in another physical location. To avoid a really big instantaneous bit rate for that one frame, you may prefer to simply copy a single frame within QT Pro (as explained by Radford) and paste it in a new desired location. On the other hand, if you are not re-inserting the graphic back into the file, you don't have to worry about any of this.

  • Itunes 7.7.1 has still bugs.

    when it is time to update apps, you go to applications, click update available down. you can only see updating apps, not all. it was fine in itunes 7.7. but on 7.7.1, it shows all apps which are already updated somehow. then if you click to update, it will be added duplicated files to mobile applications folder. I have still one update up in the bottom. but when I hit it, it shows everything. so I don't know which one would be 'updating available'. I think that I maybe reinstall again. but I don't expect too much.

    Same problem here... Says there is an update for every one of my Apps. If tell it to download then updates, it does, then creates duplicates, yet still tells me there are updates for all of them, and is more than happy to download a third copy of the same App.
    Oh, in addition, iTunes won't sync with my iPod Touch any more. Syncs for about 5 seconds, then says that it's "complete", but had done nothing!

  • Superficial problem, but it's still bugging me!

    I just registered my new 80 gig 5th generation iPod, but I accidentally hit "enter" before I renamed it. I know it's not a big deal, but I'd really like my iPod not to be named "Compaq_User's iPod" for the rest of its life. Is there any way I can fix this???

    Oh. I just fixed it. Nevermind!

  • Multichannel Exports still bugged as ****.

    I have a multichannel audio file, and as soon as I hit export Soundtrack pretends like I've chosen every instance of that file to channel 1, as opposed to the track I have chosen (1,2,3 or 4) depending.
    Before I try to export the show sounds good. After I try to export, the whole show sounds as If I've chosen track one on all my segments, despite the waveforms sounding correct. If I just click on any segment and choose the correct track again, it sound correct for the whole track.
    I've been fighting this issue on and off for the past 3 years now. It seems to go away sometimes and sometimes reappear with a vengeance. Why I cannot fathom as I haven't changed my workflow in two years. I've tried exporting anyway imaginable and it's messed up.
    This reappeared last night as a friend listening to the show before we post it mentioned that there were abrupt edits and parts that we had agreed to edit out. The export had CHANGED MY EDITS ON ME. That was a new one, it used to just start speeding up the show at ~30 minute mark with bad exports.
    As soon as I reopen STP to try a proper export, and now the problem has reappeared.
    I've researched this endlessly for the past 3 years now, and there is no fix, and only these links, mentioning the issue.
    http://forums.creativecow.net/thread/148/856717
    and
    http://www.larryjordan.biz/articles/ljmulti-channel_audioSTP.html
    Seeing how I don't actually know any professionals who would touch soundtrack with a ten foot pole, I understand why this has never been fixed. But alas I'm stuck with STP as I can't justify buying protools just to do a weekly podcast.

    Where are you getting your multichannel audio file from? Splitting it up into separate mono or stereo files might solve the problem.

  • Bugs still in 10.7.4?

    Does anyone know if  there still any bugs in 10.7.4 because I really want to update for the reopening windows after logging in fix, but is there still bugs in the update??
    Any answers will be much appreciated
    Thanks
    Sebastian

    There are no major bugs in 10.7.4 as far as I know.  I'm sure there must be some in there somewhere, but they won't be fixed until 10.7.5, which will have its own bugs (none of which are likely to be major).
    Don't make the mistake of paying too much attention to reports of problems here.  Keep in mind that the only people you hear from in a place like this are the ones having trouble.

  • Folder is no longer in this location? But Folder Still There

    I have Windows 7 and PrE 9. I was working on a folder/project on an external drive and had no problem accessing the avi or other folders in the drive. Once I was satisfied I no longer needed the project (about 14 GB) I deleted the project. I got a pop up window saying the folder was no longer in this location. What the heck? I was just working on it. I checked the folder again, everything was still there and functional. I then tried to cut and paste the folder to my main drive to see if I could delet it from there.
    It started out as a normal transfer of files and then gave the message that the folder being transferred was no longer in that location. Ok. I rechecked the Project folder and it was still there but....All of the folders inside were gone except a Stop Capture folder of Zero bites. It still says the folder isn't there lol. Even though it says Zero bites I would like to get rid of this folder and the stop capture folder inside. I had two other projects right next to the one still there and they deleted fine.
    Is this a Windows 7 thing and have you guys had this happen? I have one other folder on my desktop from a couple years back with the same scenario. Says its not there so I can't delete it. I just labeled it "can't get rid of this folder" and gave up but it still bugs me. Now I have another one.
    Thanks

    ATR,
    I should have labeled this post "Could Not Find This item" or Item Not Found
    Problem solved. I downloaded 7-zip version 9.22 beta from sourceforge (for whatever reason- just seemed good) There are other places to download from. Choose your favorite.
    Here is a screenshot of my problem folder so that if others run into this problem 7zip may work for them.
    I had a tussle with 7zip and it did not work to begin with, but the problems turned out to be really simple. My nephew is a computer wiz and came over to use the DOS procedure that people are using on the internet to delete the folder. At first he couldn't get it to work. Then we discovered there were 3 folders, one inside the stop motion capture, the stop motion capture, and the outer project folder. The folders had to be deleted from the innermost first, one at a time, to the outer folder. Hallelujah. This folder is gone after 2 years of staring at me.
    If you have this message like I did the first thing to do is go into the main folder to the innermost items and delete as many as will delete normally thru windows. Keep deleting the inner folders til you get to the first one that won't delete. Then see how many folders inside the main folder remain.
    So let's try 7zip again. I am a newbie so I thought others might like how my nephew and I did it.
    In the main window there will be a short list on the left starting with computer and accessable drives. Double click on computer (or whichever location your trouble folder is in). A bigger list of stuff will show up. Mine was in the desktop so I double click on that. I look at that list fo find my trouble folder. Double click on that. Each time you double click will go to the next internal folder. Then when you get to the innermost folder rename it ( we just used the word del). Up higher on the screen is the red delete X click on that. the folder will be gone. To get to the next folder use the green "up one level" arrow just to the left of the url bar. The next folder will show up, rename and press X to delete. When you have reached the outer folder which you thought was your problem folder it will dissapear from your desktop ( or wherever it was located). In my case I had to delete 3 folders. My other problem folder was in my external drive so I just went through the same procedure after double clicking on the drive letter which was in the list in the starting window. Exit 7-zip when done.
    You don't have to close 7-zip to delete the folders as I listed in my previous posts. These were just info I got from a couple of websites. Not complete by any means. They presume you know what you are doing with computers.
    The only reason I started this discussion was because both of these folders were made with PrE7 and PrE9. I have never had this problem with anything else. Must be some kind of filing error between PrE and windows.
    Hope this helps. The DOS procedure was lengthy and was way above my head but 7-zip only took a few minutes.

  • I know how to make firefox 12's tabs go to the bottom, but even so they still dont look exactly as they did in 3.6, how do I make them look exactly the same?

    Considering a few websites stopped working for me seeing as I was still using 3.6.X, I reluctantly decided to finally upgrade today, and it automatically upgraded to version 12. Needless to say, I wanted it to look exactly as it did in 3.6.26, and I spent a good portion of the day tinkering with various add-ons and the like to get things back the way they were. One thing is still bugging me though, the tabs, which I managed to get to the bottom of the screen, still dont look exactly as they did. There used to be a small dividing line between the tabs and the actual page, and the + on the new tab button was smaller (and I know this all seems rather picky, but it does bother me). And while I'm at it, is there any add-on that will give me the same back/forward, X, refresh, and home icons as 3.6.26? Any help is greatly appreciated. Thank you.

    Try this extension for the button:
    *Classic (Small) Toolbar Buttons: https://addons.mozilla.org/firefox/addon/cstbb/
    It should be possible to get the needed modifications.
    You can check out this MozillaZine forum thread and ask there for advice about how to tweak the user interface.
    *http://forums.mozillazine.org/viewtopic.php?f=7&t=2057009

  • MSI 890FX-GD70 and AMD 1100T won't boot. bug LED shows F F.

     Hello everyone!  This is my First Time  Build a Custom PC.  My MoBo won't boot Bios ,  NB shows debug LED   Off  of  AMD  1100t  Processor , What's wrong? I Properly removed processor  and cleaned and reinstalled again  with thermal paste  , CPU fan work perfect, memory and video card installed correctly, I removed and  reinstalled  3 times to  find  the problem and still  Bug LED shows  F F. What I can Do? What is the  problem?     Processor  or  MOBO?  I'll  Appreciate your  suggestions, Recomendations and help.  Thank you.
    my Custom Pc
    MOBO-  MSI 890FXA-GD70
    AMD X6 1100T 3.3
    Memory  8G  Corsair  Vengeance  1866Mhz
    CPU cooling  Corsair water cooling  hydro  H70
    SSD OCZ 90 Gb
    video card ASUS 2GB ATI 6970.
    Case NZXT Phantom
    Power supply : PC & Coolling  silencer  MkII 950 watts
    LITEON BD Burner.
    Logitech 350 Keyboard.
    Your  Help  will be  considerate  and  appreciated..  

    Quote from: Juank1 on 10-April-11, 10:26:37
    umm   have you connected the power cable for CPU?  sounds rare question for me,  sorry  ..  All  I know is  CPU is seated into socket where get power.     Power ATX 24 pin power connector to mainboard  is properly  connected.  or  are you talking about  ATX 8 Pin power connector JPWR2?  is it that?
    .      Also  I tried and  clear CMOS just using  1 stick RAM the slot close to CPU. nothing got it.     Debug LED   FF .     no  signs  of CPU no debug Led   Must see CPU LEDs  On .   as for  me trouble  is  on CPU or motherboard. when you install CPU did you push hard down and closing lever?  I installed CPU like manual say completely embedded into socket and closing lever  I didn't pushed .   Have To push hard it?   what you think about?     I 'll Try tomorrow removing motherboard  and reinstall   Properly as  I  did  and everything back    again.        
    Quote
    or  are you talking about  ATX 8 Pin power connector JPWR2?  is it that?
    yes

  • IMessage automatically sends as SMS even if turned off in the Settings. Is this a bug for ios 6.0.1?

    I know there's still bugs for iMessage and so when I'm not on wifi but the iMessage is turned on, I don't wait for the iMessage to fail sending. I press and hold the message to send it as text message instead immediately. Then the recepient tells me that they receive my text messages twice. So what I did today, I sent an iMessage without being connected to wifi and let it attempt to send and let it fail. To my surprise, after failing as iMessage, it automatically sent as an SMS when I had that setting turned off. Do I make sense? Do you guys also experience the same problem?

    When imessage is unavailable it sends it as SMS - that is normal see link http://support.apple.com/kb/HT3529
    troubleshooting message http://support.apple.com/kb/ts2755

  • How to squash a nasty screen blackout bug

    Hi Mac experts,
    I've been trying, without success, to squash a nasty Mac bug that causes my screen to black out during work or causes it to never wake up after sleep, the latter being more frequent. It's supremely annoying since it interrupts work a couple of times a week and, embarrassingly, happens more often during public presentations, possibly due to the 2nd screen. In some cases a single hard reset revives the MacBook, in others I have to reset several times for the screen to become accessible again. When the bug happens, the OS is still running (key feedback sound, keyboard backlighting can be adjusted) but the screen is completely black.
    It's been an unfixed bug through several OS versions from 10.8, 10.9, to the latest 10.10 (Yosemite). The usual remedies suggested in forums did not work (see below). I'm out of ideas here, hopefully you are not.
    My specs: MacBook Pro Retina 15'', purchased 2012.
    My recent crash reports can be viewed here: https://drive.google.com/folderview?id=0B_EEMeI_SbKxMlZSVHhXdm1QZWs&usp=sharing
    I have tried the following:
    udpates did nothing; crashes under all OSs (10.8, 10.9, 10.10)
    reinstalled 10.9 fresh and migrated my data; still bugged
    startup in Safe mode (disables kernel extensions); crash on the same day
    adjusting the energy prefs (disable switching, deactive all additional wake up conditions); did nothing
    SMC and NVRAM resets did nothing
    This is a bug shared by many users. Apple obviously is not fixing it. One user reported that in his specific case it wasn't a hardware issue. Replacing the motherboard did nothing (http://bit.ly/1E5cEAR). Here are some related reports:  forums.macrumors.com/showthread.php?t=1722832 (2014-4; solution: detaching from ext. screen before sleep), discussions.apple.com/thread/6014780?start=0&tstart=0 (2014-03; not resolved), discussions.apple.com/thread/5665501 (2013-12, not resolved), discussions.apple.com/thread/5548226 (2013-11 to 2014, not resolved), forums.macrumors.com/showthread.php?t=1553654 (2013-03; solution: removal of Bresink driver), bit.ly/1wdVO1C (2012-8, problem w Bluetooth, fixed by OS update 10.8.1),..
    I hope somebody has a suggestion. Looking forward to your expert insights.
    All the best

    skywalkr,
    Have you taken some screen captures of the trap and dump information?
    ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
    Mark Hopkins
    Program Manager, Lenovo Social Media (Services)
    twitter @lenovoforums
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Wizard bug - conditional validation

    Hello,
    We require validation on a wizard to prevent the user from navigating from a particular page to the next page unless they have checked a checkbox. The underlying column is not mandatory because the user may not have to visit this particular page depending on the answers he gave on previous pages.
    The only place we have found to put the validation is the "nextActionListener" of the singleStepButtonBar. However, there seems to be a bug in the generator because we cannot override the WizardPageContent template at the ItemRegion level. We only want the validation to fire if the user is in this particular page, so modifying the template at the Group level is not appropriate. As a result we have to make a post-generation change. Can anyone suggest another way of achieving this?
    thanks,
    Michael

    Steven,
    Sorry to be still bugging you about this but I'm still having problems getting it working OK. The first problem was that the error message was being added to the page 4 times (presumably one for each step). I see in the checkFocusRowIndex method of the WizardProcessModel does a check to see if the page has changed so figured I may have to do something similar. As a work around I check the FacesContext to see if any error messages have been added already and don't add it again. That much worked but I now have the problem that the error message is being displayed on the second wizard page as well. Here is my getNextAction()
        public String getNextAction()
           String nextAction = super.getNextAction();
           FacesMessage.Severity sev =  FacesContext.getCurrentInstance().getMaximumSeverity();     
           if (JsfUtils.getFacesContext().getViewRoot().getViewId().equals("/pages/GHDScreeningStart.jspx")
               && nextAction.equals("WizardGHDScreeningSubjectDetails")) {
               // Getting ready to move to second page.  Need to check that on
               // the current page, both checkboxes are ticked
                boolean inclusionCriteria = ((Boolean)JsfUtils.getExpressionValue
                        ("#{bindings.GHDScreeningInclusionCriteriaMet.inputValue}"))
                        .booleanValue();                  
                boolean exclusionCriteria = ((Boolean)JsfUtils.getExpressionValue
                        ("#{bindings.GHDScreeningExclusionCrirteriaNotMet.inputValue}"))
                        .booleanValue();
                if (!(inclusionCriteria && exclusionCriteria)) {
                    if (sev == null) {
                      JsfUtils.getInstance().addError("SCREEN_WIZARD_CHECKBOX_FAILURE");
                    // Stay on same page
                    return null;
           return nextAction;
        }I'd really appreciate some more help/guidance here !
    Cheers,
    Brent

  • Small Cover Flow bug

    Hello everybody. I have a brand new iPod Touch 32 GB, I love it. But I have a small problem. When I'm browsing through my albums using cover flow, a few flicks in, it goes abruptly back to the "home" screen and stops whatever song I'm playing.
    Everything else seems to work on the device, but Cover Flow has that litte bug. Well, I have a lot of titles (6633, and NO DEVIL :-)), it perhaps explains it, but I can't go througt all my albums cover arts without a bug. It always seems to work correctly bt suddently BOOM, it bugs.
    I have already reinstalled the software (1.1.4), but it still bugs.
    Does anyone know what to do ?
    Message was edited by: coacoacoa
    Message was edited by: coacoacoa

    If you further use your Touch, you will discover that it is not only the cover flow that is triggering this behaviour. It can happen all the time, even with the screen disactivated and only playing music. It can happen while ony looking at pictures. It rather often happens when using safari.
    Do a search on the forum here for "return to home screen" and learn how many people do have this problem. It is a serious bug.
    Btw. everytime this happens, your playcounts get deleted too...
    bye
    Wolfgang

  • Calendar Bug Report

    Hi,
    First of all, I love my Pre!  Thanks Palm.  You guys are doing awesome.  Just wanted to post a couple bugs I've noticed in the Calendar app when syncing with Google Calendar.  Nothing huge, but still bugs:
    (1) It appears that the phone sometimes misunderstands repeat settings on Google Calendar.  When deleting a single event from a repeat on either the site or the phone, the change sometimes never syncs.  "Delete all future occurrances" on the site is frequently not noticed by the phone.  Wish I knew more about why this one happens so I could be more helpful!
    (2) When traveling to any time zone west of your home location, the Pre begins displaying "All Day" events one day earlier than they actually occur.  Perhaps the app uses the start time to select the day to display on?
    That's all.  Let me know if there's a better place to post these (or if there's something I might have configured wrong that could be causing them).  Thanks!
    Post relates to: Pre p100eww (Sprint)

    Similar issue on a 3GS with iOS5. I found that this issue was related to an Exchange event that had been cancelled.  Removing the event stabilized the notifications screen.  Waiting to see if it improves the abominable battery life - I am recharging twice a day.

Maybe you are looking for