700P - Installed Palm Desktop 6.2 and "Month View" on my desktop explodes and shuts down software???? How to fix????

I just installed the Palm Desktop 6.2. When working at my computer in the software, if I click on DAY, WEEK, or YEAR view it's fine. But if I click on MONTH it craps out and the software closes up. This is error detail:
AppName: palm.exe AppVer: 6.2.2.0 ModName: datebook.dll
ModVer: 6.2.1.0 Offset: 0003d95e
Post relates to: Treo 700p (Verizon)
Post relates to: Treo 700p (Verizon)

Did you upgrade from a previous version of Palm desktop? 
Do you have all your current data on the Treo? 
If you have your data in Palm desktop and it is current, export the data for backup purposes, uninstall Palm desktop 6.2 and re-install 6.2.
Here are the export procedure instructions.
The best way to preserve your data is to export the data in each category in Palm Desktop to a seperate folder on your PC.
Create a new folder on your PC somewhere that is convenient. Name it something like Palm Desktop Data. Click on the link below and follow the instructions on that page for the export procedure.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=28734
Make sure you select all for the range in the export window.
With the data saved in the folder you created, make a copy of that folder and save to a flash drive, cd-rw or external hard drive.
Anytime you make a change in Palm Desktop, export the data that was changed to that folder and save again to the external media.
With this process you can always import the data back into Palm Desktop anytime you have a problem with the data in Palm Desktop or if your computer/hard drive/device crashes.
What is the version of windows you are using?
XP or Vista?
Post relates to: Palm i705

Similar Messages

  • The last 400  songs will not upload to iTunes Match and instead I get the following error:  iTunes has encountered a user-defined break point and shuts down.  How to fix?

    What gives with this message.  Any Apple reps want to tackle this.  BTW I am uploading from Windows 7 Ultimate and meet all the mininum requirements as prescribed by Apple.

    Enable the "iCloud Status" column in the iTunes Browser by pulling down View > View Options, select 'iCloud Status" and click OK. Sort on that column by clicking on it and find all the tracks that are "waiting." These you can delete from the iTunes library and the cloud, then update iTunes Match. Once you've done this youc an start adding the songs back to the iTunes library a few at a time.

  • Hi. There is a ghost search bar on my iMac screen which flashes constantly, even during start up and shut down. How can i make this go away? Please help. x

    Hi There is a ghost search bar on my iMac that flashes continually, even during start up and shut down. How can i make this go away? Please help. x

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • When I turn on my partially charged iPhone 5, sometimes it will suddenly go to 0% charge and shut down. How do I correct this?

    I've had my iPhone 5 for about one year with no problems. Lately however, when I turn on the phone when the battery charge is down to say 25% (due to previous use) sometimes moments after turning the phone on it will go from 25% charged to 0% charged and shut down. Other times after the phone has been on for several hours and the charge level is down to about 10% or so, it will suddenly discharge to 0% rather than gradually going down in increments of 1 or 2% at a time. This appears to happen most often when wi-fi is turned on. Any ideas on what may be causing this? I have installed the latest version of iOS7.
    Thanks

    Hi there brianfromwestmichigan,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Issue not resolved
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    -Griff W.

  • Slow booting and shut down. How?

    I just bought my macbook pro 13" just a month ago, and now the motherboard has crashed. Sent for repair and is useable now, but the booting up and shutting down took longer than before. What should I do?

    Hey Joseph! Thanks for your help. Now the shutting down seems to be faster by a bit. But it still shows the blue screen which i hate to see. Starting was as usual slow.
    The only program that needs running upon start up was MSN. And it usually doesn't gets signed in by itself even when it's checked at "auto sign in". And I'm not sure if msn itself is having any issue, or has it got something to do with my mac, because sending messages online was kinda terrible. There were many times where I typed a chunk of messages and after 5-10 mins then they told me that it wasn't sent at all. Plus it keeps logging me out. SO ANNOYED.
    And lastly, safari web browser KEEPS CRASHING. that i have to force quit it many many times. I wrote to Apple support alr. Hope that they will get back to me soon abt this. It's kinda frustrating to use it when there are so many issues whereby I don't even know the cause of.
    Beth

  • My adobe elements keeps crashing and shutting down.  How do i reinstall the software

    cross posted
    I have elements 9 - old program.  It suddenly stopped working.  How do i reinstall?  I have the serial number.  Thanks. I got a deadline tomorrow would really appreciate help.

    reset your preferences -
    acrobat:  http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7feb.w .html
    adobe media encoder: https://forums.adobe.com/thread/1713540
    after effects:  http://helpx.adobe.com/after-effects/using/preferences.html
    dreamweaver:  https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
    flash:  http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
    illustrator:  http://helpx.adobe.com/illustrator/using/setting-preferences.html
    indesign:  https://forums.adobe.com/thread/526990
    lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html
    muse (mac): https://forums.adobe.com/thread/1246022?tstart=0
    photoshop:  https://forums.adobe.com/thread/375776
    photoshop elements:  http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
    premiere pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html
    if that fails, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5 | 1
    Contribute:  CS5 | CS4, CS3 | 3,2
    FrameMaker:  12, 11, 10, 9, 8, 7.2
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • When shutting down from Start button with Firefox running, screen freezes, will not complete shutdown and I must manually shut down. How to fix?

    win 7; 32 bit OS
    Firefox 23.0

    Thanks for posting back. Glad Firefox continues to work.
    Most programs try to do a bit of a cleanup routine as they closedown so it is usually best to close them down properly.
    You will presumably have options to make the computer sleep, that needs power; or hibernate, that needs no power but may need spare RAM memory.
    * http://windows.microsoft.com/en-gb/windows7/sleep-and-hibernation-frequently-asked-questions
    No doubt you have already discovered
    * You can opt for Firefox starting with home pages or starting with the last opened Windows. <br />Even if starting from home pages the History option usually allows the last open windows and tabs to be reopened
    **[[Startup, home page and download settings]]
    * If something goes wrong Firefox tries to give you the ''embarrassing'' screen with options to select what opens from last time.
    ** [[Restore previous session - Configure when Firefox shows your most recent tabs and windows]]

  • Is Lion slow booting up and shutting down?

    After I installed Lion, my macbook pro is slow to boot up and shut down.  How can you turn off "re-open windows when logging back on"?

    The beeps on startup are often indicative of RAM problems.  The opening chime is the only normal noise on startup.  Shutdown should be essentially silent.  To the Apple store, PRONTO!
    Ciao.

  • A rectangle box with four options, Restart,Sleep,Cancel and Shut Down appears some times when I boot up, how can I stop this from happening?

    A rectangle box come up sometimes when I boot up my computer, it says, Are you sure you want to shut down your computer now? and has four boxes Restart, Sleep,Cancel and Shut Down. How can I get rid of this annoying occurance?

    That box is normally invoked with Control-Eject.

  • Installing Palm Desktop 6.2 on Vista Business: only installs Media and Install, no Cal, Contacts

    I attempted to install Palm Desktop 6.2 under Vista Business on top of Palm Desktop 6.2 beta. I selected a complete install.  After the installation and the device sync, only the Media and Install sub-applications were available on the desktop (though all were still available on the handset).  No Calendar, no Memos, no Contacts, nothing.
    I subsequently re-installed (twice), each time removing the Palm Desktop software completely (from the control panel).  Same result.  Is there some trick to this I need to know?
    Thanks.
    -- Ed
    Post relates to: Treo 700p (Sprint)

    Thanks, I very much appreciate the help.  But why does this happen?  I mean, after I tried it,
    I figured, okay, maybe if I change the security permissions no the executable so that my id
    has full control...  But no.  I did that (also changed the permissions on the link), but when I
    bring it up under my account without running it as Admin, it still brings up only the media
    portions of the Desktop.  Then I went through c:\Program\Files\Palm and gave full control
    permissions to my id for every executable I found in the top level directory.  Still no joy.
    I do appreciate the help -- it certainly beats not being able to access my calendar at all --
    but I'm afraid I have to call this more of a workaround than a fix.  For one thing, I'd like very
    much to be able to access my calendar from a userid on this machine that does not have
    Administrative privileges.  Any chance for a fix at any point in the future?
    Thanks again!
    -- Ed

  • Problem installing Palm Desktop on Windows Vista.

    I am trying to install PalmDesktopWin414 on a couple different computers that are both running Windows Vista Ultimate. At the palmOne InstallShield Wizard welcome screen it generates the following error.
    Internal Error 2738.
    This interrupts the installation and it does not complete. Any suggestions?
    Jon
    Post relates to: Palm Z22
    Post relates to: Palm Z22

    hello all , i got mine up and running late last night and thought that since it drove me nuts i would share how i did it with others having the same problem, for fyi i am using a sony clie sj22 and hotsyncing with an usb cable for reference with palm OS4.0 i think.
    1. dont install the software just yet please follow
    2.let palm desktop thru thye firewall program and make an exception for it there.
    3. disable and antivirus software as it sees palm as a threat.
    4.now install palm desktop i used my old version palm desktop 4.0 BUT DONT INSTALL THE PROGRAM IN PROGRAM FILES try somewhere else like documents( this i read on another site where someone tried it but failed there).
    5.now turn on your palm pda and open up hotsync page, up in the upper left screen corner touch the hotsync tab and down should come a sub menu, form here you need to set up all of your conduits,modem sync preferencesmconnection setup etc make sure they are set for how you will be hotsyncing.
    6.now open up the desktop program and on your toolbar you should see the hotsync icon click on this and set  set the options here.
    7.now you should be able to hotsync(communicate) from the pda to the computer .
    Hope this helps , sorry that some one like me had to figure it out by staying up late until i got it .
    MICROSOFT apparently doesnt care if you fix it that way you bite the bullet and buy a windows mobile device.
    and PALM i think about the same
    too bad if you think about all the millions of these devices out there they are pissing alot of people off and losing sales from it.
    Message Edited by aa1pr on 11-09-2007 06:05 AM

  • Problem installing Palm Desktop 4.0 on Mac (Intel CPU + OS 10.5.6)

    Hello,
    When installing Palm Desktop 4.0 on my Mac (MacBookPro= Intel CPU + OS 10.5.6), the installation fails when trying to install the last files (.prc files). I cannot find any installation log to know what the problem exactly is. If I try anyway to run the software, Palm Desktop seems to run OK, but HotSync Manager fails (error related to "PPC-lib").
    The problem is I am still using my old but fine Visor, so I don;t think I can install a more recent version of Palm Desktop.
    Thanks for any help  !
    Post relates to: Visor Deluxe

    Hello Walter and welcome to the Palm forums.
     For such a new Mac, I'm fairly certain, you are going to have to use Palm Desktop 4.2.1 Rev D or later (I believe that Rev D is the latest) for Mac OS X.  You can download Palm Desktop 4.2.1 Rev D for Mac OS from the Palm website.  You may need to pick a newer Palm handheld to gain access to the download link.  If that is the case, pick the Tungsten T5, it should require Palm Desktop 4.2.1 Rev D.
    Alan G

  • Tungsten E2-can't install Palm Desktop 6.2 - Windows 7

    Tried to install Palm Desktop 6.2 on Windows 7 computer so I can down load data on my Palm to desktop computer.
    Before final installation I get the following message:
    "This set-up does not support upgrading from your current installationof Palm OS Desktop."
    Uninstall your current desktop."  Desktop not installed on computer.
    Closed this info box and next box popped up.
    "The wizard was interrupted before Palm Desktop by access could be completed. Your system has not been modified.
    To install this progaram at a later time, please run installation again."
    And finally the following message popped up:
    "The selected Port COM1 is not available at this time. Hot Sync manager will open the port whwn it becomes avaialble."
    Any idea what I can do to get this progarm to load on my new computer?
    Post relates to: Tungsten T2

    Try to "clean" uninstall PD and re-install 6.2. 6.2 has data loss issues, FYI. You can export the data to backup and if the data is lost, import the data to recover.
    You should first make a copy of your data to have just in case something
    happens. You can find your data files by going to Start --> Documents -->
    Palm OS Desktop. Highlight your Palm Desktop username and right click and
    copy. Then go to your PC desktop right click on a blank spot and select paste.
    If this is the first time you are installing Palm desktop and encountering a problem, skip the previous step.
    Now you want to uninstall Palm Desktop and remove everything that has to do
    with Palm Desktop from your computer.
    Go to the following locations on the PC and delete the folders listed below.
    C:\Program Files\Palm or Palm One
    C:\Users\[Vista Login Name]\appdata\local\virtualstore\Program Files\Palm or
    PalmOne
    C:\Users\[Vista Login Name]\appdata
    *Note you may need to view hidden folders to get to appdata. To do that go
    into your control panel and open folder options. Go to view tab and uncheck
    hide hidden files.
    Once this is done you will need to delete some registry keys from your PC Operating System.
    Word of warning, going here and deleting the wrong thing can cause your PC
    from starting up, crashing and deletion of programs and data. If you feel
    you are unsure of yourself, see if you have a friend that can help you or a
    PC technician that you can pay to help you. This procedure will show them everything they need to delete. To make sure we have a good copy of the current registry, we need to do a backup of the Registry.
    Go to start on the PC, in the search field type "regedit.exe" without quotes.
    Highlight COMPUTER, go to File --> Export. Should pop up with a Save As box.
    Current location is fine, should be in My Documents or save to a location you will remember. In the file name on the bottom type "backup[todaysdate]" i.e. backup07072008. Next, the hard part.
    The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are you sure. Say yes. Do the same thing for all keys below.
    If you make a mistake, stop what you are doing. And call a PC technician.
    BUT do not turn off your computer.
    The reg keys are as follows (Note: some of theses reg keys will not be here
    but if they are delete them)
    * HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
    * HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
    * HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
    * HKEY_CURRENT_USER\Software\Palm
    * HKEY_CURRENT_USER\Software\Palm, Inc.
    * HKEY_CURRENT_USER\Software\PalmDesktopAutorun
    * HKEY_CURRENT_USER\Software\palmOne
    * HKEY_CURRENT_USER\Software\PalmSource
    * HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
    Next reboot your computer.
    Then reinstall your Palm desktop from the CD and do a hotsync. If it asks
    you for a username, enter the name that is on your device in the upper right corner of the hotsync screen.
    The best way to preserve your data is to export the data in each category in Palm Desktop to a separate folder on your PC.
    Create a new folder on your PC somewhere that is convenient. Name it something like Palm Desktop Data. Click on the link below and follow the instructions on that page for the export procedure.
    http://kb.hpwebos.com/wps/portal/kb2/common/article/28734_en.html
    Make sure you select all for the range in the export window.
    With the data saved in the folder you created, make a copy of that folder and save to a flash drive, cd-rw or external hard drive.
    Anytime you make a change in Palm Desktop, export the data that was changed to that folder and save again to the external media.
    With this process you can always import the data back into Palm Desktop anytime you have a problem with the data in Palm Desktop or if your computer/hard drive/device crashes.
    For reference purposes, click on the following link for the support page for your device on the kb.hpwebos.com webpage.
    http://kb.hpwebos.com/wps/portal/kb/common/article/47831_en.html#tungstent2
    There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

  • ISScript error when installing Palm Desktop

    I am recieving the following error when installing palm desktop for a z22:
    "1:The InstallScript engine is missing from this machine. If availible, please run ISScript.msi, or contact your support personal for further assistance,"
    I know the setup app uses ISScript 11 so I have downloaded and installed it, but it is failing still. Does anyone have other suggestions?
    some other info:
    Platform: Windows XP Pro
    Thanks in advance.
    Paul 
    Post relates to: Zire

    follow the steps provided. this is related to your problem.  
    Error - 1607: Unable to Install InstallShield Scripting Run Time
    Update to the Latest InstallShield Installation Engines
    http://knowledge.macrovision.com/selfservice/viewContent.do?externalId=Q108322&sliceId=1
    When running into installation issues, it is always recommended that you use the latest InstallShield installation engines. This article contains steps on how to download and install the latest InstallShield engines for the installation version you are trying to install.
    What to do?
    Follow the Troubleshooting steps below:
    Determine if the installation is compressed or uncompressed. 
    Launch Windows Explorer by pressing the Windows key + E or select Start > Run and type explorer. 
    Browse to the location of the installation files. For example, if the installation is on a CD, browse to the CD-ROM drive. 
    Search for the installation file. The typical names for installation files are setup.exe, update.exe, installer.exe, etc. 
    If the installation file is the only file in the directory (a single installation file), continue with the remaining suggestions in Step 1. Otherwise, if there are other files in the same directory as the installation file, continue to Step 2. 
    When a single installation file is run, it uncompresses the installation files into a temporary location (usually the Temp directory). Use these steps to find the installation in the temporary location:
    Start the single installation file, but do not continue or cancel the installation dialogs. 
    Browse to the Temp directory. For further information on how to find the Temp directory, see Clean the Temp Directory. 
    Search for the installation file. The typical names for installation files are setup.exe, update.exe, installer.exe, etc. The uncompressed installation file should contain other files in the same directory. Continue with step 2.
    Right-click on the installation file that you are trying to install and select Properties. 
    In the Properties dialog, click on the Version tab. 
    Look at the File Version field to determine the version number of the InstallShield engine you need. Follow the instructions for your version. If you started the installation in Step 1d, cancel it.
    If the file version number is 2.0x or less:
    Delete the folder C:\Program Files\Common Files\InstallShield\engine from the machine. 
    Download IkernelUpdate.exe. 
    Once downloaded, double-click it. This installs the InstallShield engine for your installation.
    If the file version number starts with 6:
    Delete the folder C:\Program Files\Common Files\InstallShield\engine from the machine. 
    Download IkernelUpdate.exe. 
    Once downloaded, double-click it. This installs the InstallShield engine for your installation.
    If the file version number starts with 7:
    Check if there is a file with a .msi extension in the same directory as the installation file.
    If Yes:
    Delete the folder C:\Program Files\Common Files\InstallShield\Driver\7 from the machine. 
    Download ISScript7.zip. 
    Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?. 
    Double-click the IsScript.msi file. This installs the ISScript engine for the version of the setup.
    If No:
    If the file version is less the 7.01 
    Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\0700 from the machine. 
    Download InstallShieldEngineUpdate700.exe. 
    Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
    If the file version is greater than or equal to 7.01: 
    Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\0701 from the machine. 
    Download InstallShieldEngineUpdate701.exe. 
    Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
    If the file version number starts with 8:
    Delete the folder C:\Program Files\Common Files\InstallShield\Driver\8 from the machine. 
    Download ISScript8.zip. 
    Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?. 
    Double-click the IsScript8.msi file. This installs the IsScript engine for this version of the installation.
    If the file version number starts with 9:
    Check if there is a file with a .msi extension in the same directory as the installation file.
    If Yes:
    Delete the folder C:\Program Files\Common Files\InstallShield\Driver\9 from the machine. 
    Download ISScript9.zip
    Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?. 
    Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
    If No:
    If the file version is less the 9.01: 
    Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\09\00 from the machine. 
    Download InstallShieldEngineUpdate900.exe. 
    Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
    If the file version is greater than or equal to 9.01: 
    Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\09\01 from the machine. 
    Download InstallShieldEngineUpdate901.exe. 
    Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
    If the file version number starts with 9.5:
    Delete the folder C:\Program Files\Common Files\InstallShield\Driver\10 from the machine. 
    Download ISScript10.zip 
    Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?. 
    Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
    If the file version number starts with 10:
    Check if there is a file with a .msi extension in the same directory as the installation file.
    If Yes:
    Delete the folder C:\Program Files\Common Files\InstallShield\Driver\10 from the machine. 
    Download ISScript10.zip
    Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?. 
    Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
    If No:
    If the file version is less the 10.1 :
    Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\10\00 from the machine. 
    Download InstallShieldEngineUpdate1000.exe. 
    Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
    If the file version is greater than or equal to 10.1 :
    Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\10\01 from the machine. 
    Download InstallShieldEngineUpdate1001.exe. 
    Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
    If the file version number starts with 10.5:
    Check if there is a file with a .msi extension in the same directory as the installation file.
    If Yes:
    Delete the folder C:\Program Files\Common Files\InstallShield\Driver\1050 from the machine. 
    Download ISScript1050.zip. 
    Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?. 
    Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
    If No:
    Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\10\50 from the machine. 
    Download InstallShieldEngineUpdate1050.exe. 
    Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
    If the file version number starts with 11:
    Check if there is a file with a .msi extension in the same directory as the installation file.
    If Yes:
    Delete the folder C:\Program Files\Common Files\InstallShield\Driver\11 from the machine. 
    Download ISScript11.zip. 
    Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?. 
    Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
    If No:
    Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\11\00 from the machine. 
    Download InstallShieldEngineUpdate1100.exe. 
    Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation. 
    Post relates to: Treo 680 (Unlocked GSM)

  • Installing Palm Desktop & Missing Sync to Mac-Questions

    Here are the steps from the Mark/Space webpage for install Palm Desktop (PD) and Missing Sync (MS) to my new Mac (I just converted from PC 4 days ago):
    "Note: In order for the Missing Sync to work properly with Palm Desktop, Palm Desktop must be installed PRIOR to installing Missing Sync for Palm OS.
    1) Install Palm Desktop 4.2.X
    To download Palm Desktop 4.2.X, please go to: http://www.palm.com/us/support/macintosh/mac_desktop.html
    2) Install Missing Sync for Palm OS Version 5.1.X or higher
    3) If you have previously synchronized with Palm Desktop, your user name will be automatically added to the list of handhelds.
    4) Configure the Palm Desktop conduits and make certain that other PIM conduits, such as Mark/Space Conduits for Contacts, Events and Tasks are not enabled."
    I have about 40 3rd party apps on my Treo, few of which have a desktop component (conduit): Adobe, Avantgo, DocsToGo, Easy Schedule (United Airlines), eReader, MobiPocket, WorldMate, Vindigo and Zagat. I believe that all except for MobiPocket will work with Mac.
    However, what do I do during the first sync, when I want to get my PIMs syncing and PIM data migrating from my Treo 680 the the PD on the Mac? I assume that this might work:
    1. When do I delete all Treo 680 3rd party apps, before I sync the PIMs or does it matter as long as I turn off the 3rd party conduits?
    2. Only sync the PIMs first until I see that they are working. Do this with conduit set to handheld overwrites desktop.
    3. Get Mac-compatible apps from the makers, install them on the Mac and, using MS, sync and install them on my Treo. This entails correctly setting the conduits and following MS's instructions when the process is a little tricky (ie, Vindigo, Avantgo). I don't want to update any of these apps via wireless so I'm hoping that Missing Sync can do the syncing job for all of them.
    Zagat isn't on their supported apps list but Zagat does indicate that it works with Mac. I don't know what that means.
    Does anyone have any comments. Thanks.

    Since Palm Desktop and Missing Sync are not Apple products you'd probably be better off posting your question on the Missing Sync forums:
    http://forums.markspace.com/

Maybe you are looking for