7210 will no longer print.

My 7210 All-in-one no longer prints (after 3 years of service). It will still scan and copy, but the printer is no longer recognized. I have an HP computer with Windows Vista, 64-bit. The default , printer is Microsoft XPS Document writer, but the 7200 is no longer listed as an option. I have tried a system restore, to an earlier date when it did print, but I get an error message that the system restore did not work. Don't know why, but something about not all files were included, but I am choosing the C drive with my system files so I don't know what that problem is either. HELP!

Hi,
Download and run HP Print and Scan Dr utility from link below to diagnose the issue.
www.hp.com/go/tools
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

My HP Officejet Pro 8500 A910 will no longer print aqua.

My HP Officejet Pro 8500 A910 will no longer print aqua. I just tried two new cartridges and when I clean the heads, no aqua prints. I get no error messages however.
One possible issue: Recently I used a new HP aqua print cartridge (940XL version) that kept stalling my printer. If my printer sat without printing for 10 minutes or more, the only way I could get it to print would be to shut down the printer and restart it. Then, as long as I kept printing, it worked fine. When I replaced the problematic print cartridge the printer works fine except now it won't print aqua. Could the problematic cartridge damaged something?
I looked at the print head and it looks fine. What is strange is that NO AQUA INK at all shows on the print head page.
What should I do? Help!

Hey @CWickstrom ,
Thank you for taking the time to post on the HP Forums today! Hope you enjoy the experience.
I recommend calling HP Technical Phone Support for this issue I believe you will be given options and help I can't.
If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
HP printers generally have a 1 year warranty from their purchase date, you can verify the warranty using the following link if you would like; warranty check.
I hope this helps.
I worked for HP.

MY HP DESKJET 697C PRINTER WILL NO LONGER PRINT???? - HELP!!!!!

My HP DeskJet 697C Printer will no longer print!?
1. First, a mechanical bang noise comes from inside the printer.
2. Next, the top over the "ON" switch yellow light blinks!
3. Finally, the following on screen Error Mesage reads:
"Your HP DeskJet 697C Printer has Failed to Print!"
No reason is Given!
But I suspect, something inside the printer has malfunctioned since there is a one singular "Bang" Noise
each time I attempt to make a Print!..As if the sliding on the chrome rail ink cartridge was obstructed by something blocking its full back and forth movement during the printing process!?
HELP!
DFIX9
9-12-11
2:40 pm.

Try resetting the printing system.
OS X Mavericks: Reset the printing system
If you have the printers IP address open Terminal (applications/Utilities) and at the prompt type: ping {printerIP}. You will get a reply or failure.
Network Printer Troubleshooting
HP – Wireless Printing Center
HP – Printer Not Found During Wireless Installation

I have a macbook pro and aphotosmartD110 wireless printer. I was told that if I install the printer software on my computer, it will no longer print wirelessly. Is that true and how do I scan wirelessly without loading in the software?

I have a macbook pro and a photosmart D110 printer. I was told that if I load the software for the printer onto my mac that it will no longer print wierlessly. Is that true and how can I scan wirelessly without loading the software? Also, can I just connect my mac to the printer with a cable and scan or do I need that software loaded onto the mac? Thanks for all help!

If you are running Lion then all drivers are distributed through Software Update. You do not need to install anything, other than to install the printer in System Preferences > Print & Scan. If you already added the printer while it was connected using USB, you might want to delete it and set it up again wirelessly to avoid confusion. Or, give them two distinct names e.g. "Photosmart D110 (USB)" and "Photosmart D110 (wireless)".
All scanning functions are now performed using Preview, but you can also access the scanner through the same Print & Scan preference pane, or with Image Capture.
This HP document may help explain how driver software is distributed now:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03079365&cc=us&dlc=en&lc=en &product=4144493&tmp_track_link=ot_search#N108

Printer will no longer print PDF document--"no pages selected" although specific pages were selected?

Brother printer will no longer print PDF document--"no pages selected" although I did specify pages. Have reviewed and tried Adobe trouble shooting, not helpful. Cannot print page as image. Brother says to contact Adobe

There may be some security issues related to the USPS PDFs.
http://www.certified-mail-envelopes.com/signatures-usps-certified-mail-return-receipt-requested
I can't help with the scan/print problem. You seem to have done everything I would try.
I don't know if maybe using a registry cleaner would help.
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Ps will no longer print, Print on menu is grayed out

Ps (CS5) will no longer print, Print on menu is grayed out
Have found many discussions about this but no solutions that work in my case.
I tried changing printers, did not work.
I tried changing whether Ps or printer manages color - cannot find that setting except when the Print dialog shows up... and of course it does not show.
For my Adobe PDF printer I tried changing various settings, nothing made a difference.
Must I reinstall Photoshopj?

Ps (CS5) will no longer print, Print on menu is grayed out
Have found many discussions about this but no solutions that work in my case.
I tried changing printers, did not work.
I tried changing whether Ps or printer manages color - cannot find that setting except when the Print dialog shows up... and of course it does not show.
For my Adobe PDF printer I tried changing various settings, nothing made a difference.
Must I reinstall Photoshopj?

Macbook Pro OSX 10.8 and Epson WF 7525 will no longer print. It did until quite recently . Now I get Filter failed and RastertoescpII when i try to print ( test sheets ok) . Have tried to to uninstall and reinstall but nothing. Any advice, please.

Question ?
Macbook Pro OSX 10.8 and Epson WF 7525 will no longer print.
It did until quite recently . However now I get filter failed and RastertoescpII and pages of items when i try to print .
Print head test sheets/head cleaning etc ok .
Have tried to to uninstall and reinstall but nothing.
Any advice, please?.
ps
The printer deos not show up on Epsons site but i think I have the software from Apple.
Not an ideal situation.

Try a reset > OS X Mountain Lion: Reset the printing system

With Leopard, iPhoto6 will no longer print captions in books

Now that I've upgraded to Leopard, iPhoto6 (6.0.6) will no longer print the captions in books when I send them to my desktop printer (Epson Stylus Photo R300). It does print the titles on the front covers. For calendars, it'll print the lines but not the dates. Is there anything I can do to fix this?

Try repairing permissions, try the latest security update, try recreating your drivers from scratch using the latest drivers on Xerox's website, try using open source drivers*, or recovering your old copy of the previous operating system from your backup and disabling Java.

HP Officejet 6500 Wireless will no longer print cyan

Printer will no longer print Cyan.

Make sure to use HP Genuine Ink Cartridges for your Printer as the use of refilled ink can the damage the Printhead which may cost a more serious problem related to your printing. First, check your ink levels, if your cyan ink seems to be empty then, replace it. If not, got to the Setup menu of your printer then look for "Tools" then select "clean printhead". This allow the printer to free the printhead from dust build-ups and any dried ink. If cleaning the printhead still doesn't fix the issue then try another Cyan ink cartridge. If replacing the cartride still doesn't solve the issue then you must take all the cartridges out including the printhead and manually clean the copper contacts of the printhead by wipping it with a soft lint free cloth. After cleaning, insert all back-in and perform another cleaning in the tools menu of your printer. Problem should be fixed after performing all that steps.
Please click "Kudos" "Thumbs up" If this post was helpful.

Daily Sudoku Will No Longer Print Out

Daily Sudoku worked great for several days after I first got my HP printer. Now it will no longer work--I've tried to set it up again several times to no avail. Please help!

The last thing I want to do is remove web services. It may fix your problem but it will remove your email address so let's try some other steps first. I was able to print the Easy Sudoku and it seems to be up-to-date.
Press the ePrint button and then go into the "Settings." Scroll down until you see "Turn ePrint Off" and follow the prompts to simply turn it off. You should still be in the ePrint Settings so then "Turn ePrint On." It immediately goes back on when you press that so there should be no prompts.
Press the ePrint button again because the back arrow takes you to the main screen. Now "Print Info" page in order to complete the steps to trick the ePrint to communicate with the app. Print Apps are third-party software and it is somewhat difficult to work with them because it's hard to tell if there is a problem on their end.
Try to print the Daily Suduko again and if that does not work, turn the printer off and back on again with the power button. At this point, if you are still having problems let me know what happens when you try to print it and it doesn't work. For example, do you get an error message or does the printer freeze up, etc.?
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Canon ImageClass MF4800 will no longer print

When I got this printer I could not get it to work. After fumbling around and calling Apple and Canon, I eventually got it to work. Not sure what I did, but it started working. This was probably coincidental, but when it started working it had one job stuck in the queue, but it printed. So I left that job in the queue.
Well, I just recently had to change the toner cartridge and now it no longer works. I tried uninstalling, reinstalling as well as resetting the printing system. I searched the internet and have wasted countless hours trying to fix this to no avail.
After I install the printer and try to print, I see the following message in the printer queue "Printing - Connected to printer."
Then it just hangs there. Sometimes I may get one page, but most times I get nothing. If I kill this job and try to print another job, it either does this again and hangs, or says "ready to print" and it won't print.
Something that is probably relevant is that when I print, a new process is created called xdclfilter. And if I leave the job running, this process continues to eat memory until I get an error telling me I am running out of memory and I must kill something. I have an iMAC that identifies as a mid 2010 model and I have 12 GB of RAM.
I have also uninstalled printer and deleted the /library/printers/canon folders and reinstalled. Same problem. Right now I connected over wifi. Due to an illness I moved my computer downstairs and my printer is still upstairs. But I had this working over wifi just like this for over 6 months.
Any suggestions appreciated. I'd be welcome to share any logs, but you'll just need to tell me how to get them. I now have a nice shiny printer with a brand new genuine Canon toner cartridge (didn't go for generic because I didn't want to experience problems...HA!) and I can't print to it.
Thanks for any suggestions.

Just for fun I ran Disk Utility to repair permissions. Here is what it found. I am fixing them right now. I see a lot of references to EPSON though I am not using an Epson.
Verifying permissions for “Macintosh HD”Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.Group differs on “Library/Printers”; should be 80; group is 0.Group differs on “Library/Printers/Icons”; should be 80; group is 0.Permissions differ on “Library/Printers/EPSON/Fax/PDEs/PDECPlugin.plugin/Contents/Resources/FaxSettin gs.nib”; should be -rw-r--r-- ; they are drw-r--r-- .Permissions differ on “Library/Printers/EPSON/Fax/PDEs/PDECPlugin.plugin/Contents/Resources/Recipient Settings.nib”; should be -rw-r--r-- ; they are drw-r--r-- .Permissions differ on “Library/Printers/EPSON/Fax/Utility/FAX Utility.app/Contents/Resources/FAXUtility.nib”; should be -rw-r--r-- ; they are drw-r--r-- .Permissions differ on “Library/Printers/EPSON/Fax/Utility/FAX Utility.app/Contents/Resources/MainWindow.nib”; should be -rw-r--r-- ; they are drw-r--r-- .Permissions differ on “Library/Printers/EPSON/Fax/Utility/FAX Utility.app/Contents/Resources/SelectPrinterWindow.nib”; should be -rw-r--r-- ; they are drw-r--r-- .Permissions differ on “Library/Printers/EPSON/Fax/Utility/Plugins/FaxCheckConnection.plugin/Contents/ Resources/FaxCheckConnectionWindow.nib”; should be -rw-r--r-- ; they are drw-r--r-- .Permissions differ on “Library/Printers/EPSON/Fax/Utility/Plugins/FaxCheckConnection.plugin/Contents/ Resources/ProgressDlg.nib”; should be -rw-r--r-- ; they are drw-r--r-- .Permissions differ on “Library/Printers/EPSON/Fax/Utility/Plugins/FaxPrinterSpeedDial.plugin/Contents /Resources/CommunicationDlg.nib”; should be -rw-r--r-- ; they are drw-r--r-- .Permissions differ on “Library/Printers/EPSON/Fax/Utility/Plugins/FaxPrinterSpeedDial.plugin/Contents /Resources/EditDlg.nib”; should be -rw-r--r-- ; they are drw-r--r-- .Permissions differ on “Library/Printers/EPSON/Fax/Utility/Plugins/FaxPrinterSpeedDial.plugin/Contents /Resources/EditGroupView.nib”; should be -rw-r--r-- ; they are drw-r--r-- .Permissions differ on “Library/Printers/EPSON/Fax/Utility/Plugins/FaxPrinterSpeedDial.plugin/Contents /Resources/EditSpeedDialView.nib”; should be -rw-r--r-- ; they are drw-r--r-- .Permissions differ on “Library/Printers/EPSON/Fax/Utility/Plugins/FaxPrinterSpeedDial.plugin/Contents /Resources/PrinterSpeedDialWindow.nib”; should be -rw-r--r-- ; they are drw-r--r-- .Permissions differ on “Library/Printers/EPSON/Fax/Utility/Plugins/FaxPrinterSpeedDial.plugin/Contents /Resources/SelectImportTargetDlg.nib”; should be -rw-r--r-- ; they are drw-r--r-- .Permissions differ on “Library/Printers/EPSON/Fax/Utility/Plugins/FaxSettings.plugin/Contents/Resourc es/AutoReceptionSettingsView.nib”; should be -rw-r--r-- ; they are drw-r--r-- .Permissions differ on “Library/Printers/EPSON/Fax/Utility/Plugins/FaxSettings.plugin/Contents/Resourc es/CommunicationWindow.nib”; should be -rw-r--r-- ; they are drw-r--r-- .Permissions differ on “Library/Printers/EPSON/Fax/Utility/Plugins/FaxSettings.plugin/Contents/Resourc es/ConfirmSettingsView.nib”; should be -rw-r--r-- ; they are drw-r--r-- .Permissions differ on “Library/Printers/EPSON/Fax/Utility/Plugins/FaxSettings.plugin/Contents/Resourc es/DialToneDetectionSettingsView.nib”; should be -rw-r--r-- ; they are drw-r--r-- .Permissions differ on “Library/Printers/EPSON/Fax/Utility/Plugins/FaxSettings.plugin/Contents/Resourc es/FaxSettingsWindow.nib”; should be -rw-r--r-- ; they are drw-r--r-- .Permissions differ on “Library/Printers/EPSON/Fax/Utility/Plugins/FaxSettings.plugin/Contents/Resourc es/HeaderInfoSettingsView.nib”; should be -rw-r--r-- ; they are drw-r--r-- .Permissions differ on “Library/Printers/EPSON/Fax/Utility/Plugins/FaxSettings.plugin/Contents/Resourc es/IntroductionView.nib”; should be -rw-r--r-- ; they are drw-r--r-- .Permissions differ on “Library/Printers/EPSON/Fax/Utility/Plugins/FaxSettings.plugin/Contents/Resourc es/SettingResultView.nib”; should be -rw-r--r-- ; they are drw-r--r-- .Permissions differ on “Library/Printers/EPSON/Fax/Utility/Plugins/FaxTransmissionRecord.plugin/Conten ts/Resources/FaxTransmissionRecordWindow.nib”; should be -rw-r--r-- ; they are drw-r--r-- .Group differs on “Library/Printers/PPDs”; should be 80; group is 0.Group differs on “Library/Printers/PPDs/Contents”; should be 80; group is 0.Group differs on “Library/Printers/PPDs/Contents/Resources”; should be 80; group is 0.ACL found but not expected on “private/etc/hosts”User differs on “private/var/db/displaypolicyd”; should be 0; user is 244.Group differs on “private/var/db/displaypolicyd”; should be 0; group is 244.
Permissions verification complete

HPc410a printer will no longer print wirelessly

running windows 7, works to print by eprint but no longer will print wirelessly. I hsve tried unplugging, tried deleting the printer from comp and reinstalling. the tests show that the wireless connection is good. Not getting any error reports when trying to print it just never comes thru the printer. Desktop, ipad, laptop and Iphone all quit printing.

Let's set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway.
- Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS. This is Google DNS. You can choose another external DNS if you wish.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Photosmart 5580 will no longer print from my wifes laptop, only from the desktop computer

Hello,
We have an HP computer with a photosmart 5580. We also have a lynksis wireless network set up for the home for all of the kids laptops. My wife and kids used to have the capability to print documents from their laptops. I am not sure if it was going through the wireless network or the bluetooth technology on the laptops. Recently we have run into the problem that they are no longer able to print from their laptops and even from the desktop we have not been able to print. I have had to reinstall the printer onto the desktop 2 times to make the printer work. But then a week or 2 later the computer stops recognizing the printer and I will have to reinstall it. The desktop is only 2 years old but it is barely used since everyone has a laptop. Also a friend of ours says that by doing a disk defrag on the computer that it messes up anything that we have connected to the computer. I strongly disagree with that statement and like I told my wife, if that were the case then the printer would have stopped working last year, but she takes this friends advice seriously and told me to stop the defrags completely.
I am thinking that it may be something in the registry that is causing this problem. Am I headed in the right direction or does anyone else have a different idea to correct this problem?
Thanks

Well, I think the problem is that the printer is getting a different IP address from the router periodically and the printer software cannot keep track of the printer.
The best way to fix this is to reserve an IP address for the printer so that it has the same IP address all the time. Do you need help doing this?
Unless I am missing something, this system is not using Bluetooth, but the Linksys 802.11 wireless system and defragging your hard drive has nothing to do with it (and is generally a waste of time, anyway).
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

My HP printer will no longer print in colour

After upgrading to the latest OS my HP printer will not print in colour for me. I thought at first it was the printer error, but then I realised it still prints in colour for my husband's Dell. I've tried uninstalling and reinstalling the printer; updating the printer driver; looked and looked at the settings to try to find a colour setting in case I've somehow got it set to b&w - but I still can't get any colour print. Any ideas?

It is quite a while since I've used an HP printer, MillyJ, but immediately under the "orientation" selection in the standard print dialogue is there a drop down box which provides a variety of choices including "Quality and Media"? If so, select it and make sure that "Grey Scale Printing" is not enabled. If not look through any other options offered. Strangely, the option for grey scale or black and white printing doesn't appear under the "Color" settings with quite a few printers.
You might also want to have a look at http://ostatic.com/question/mac-leopard-printing-in-black-and-white and see if using the instructions there provide any clues to resolving the issue (essentially in reverse, as this person was actually trying to print in B&W and having trouble)
Cheers
Rod

Epson Stylus NX430 will no longer print!

I recently changed internet providers and purchased a new Netgear router. Up until then, I have had no problem printing from my Macbook Air to my Epson Stylus NX430, but now when I try to print I get an Error message! I have emailed back and forth with Espon and we confirmed that the connection is fine. The drivers are up to date. We uninstalled and reinstalled the printer numerous times. We are able to print a test page using the Espon Utility. However, when I go to print from Word or Text/Email it does not work. I get an error message. Oddly enough it will print a document every so often, but not always. Epson has said that it is most likely a setting on my computer. Can someone help? Thank you!!

E [21/Feb/2013:18:32:23 -0600] [Job 446] Job stopped due to filter errors; please consult the error_log file for details.
D [21/Feb/2013:18:32:23 -0600] [Job 446] The following messages were recorded from 18:32:04 to 18:32:23
D [21/Feb/2013:18:32:23 -0600] [Job 446] Adding start banner page "none".
D [21/Feb/2013:18:32:23 -0600] [Job 446] Queued on "Epson_Stylus_NX430" by "lindsey".
D [21/Feb/2013:18:32:23 -0600] [Job 446] File of type application/pdf queued by "lindsey".
D [21/Feb/2013:18:32:23 -0600] [Job 446] Setting job-hold-until to no-hold
D [21/Feb/2013:18:32:23 -0600] [Job 446] Adding end banner page "none".
D [21/Feb/2013:18:32:23 -0600] [Job 446] Job released by user.
D [21/Feb/2013:18:32:23 -0600] [Job 446] job-sheets=none,none
D [21/Feb/2013:18:32:23 -0600] [Job 446] argv[0]="Epson_Stylus_NX430"
D [21/Feb/2013:18:32:23 -0600] [Job 446] argv[1]="446"
D [21/Feb/2013:18:32:23 -0600] [Job 446] argv[2]="lindsey"
D [21/Feb/2013:18:32:23 -0600] [Job 446] argv[3]="Gmail - Re: Library Question!"
D [21/Feb/2013:18:32:23 -0600] [Job 446] argv[4]="1"
D [21/Feb/2013:18:32:23 -0600] [Job 446] argv[5]="AP_ColorMatchingMode=AP_VendorColorMatching AP_D_InputSlot= APCustomColorMatchingProfile=sRGB ApplicationBundleName=Safari nocollate ColorModel=RGB com.apple.print.DocumentTicket.PMSpoolFormat=application/pdf com.apple.print.JobInfo.PMApplicationName=Safari com.apple.print.JobInfo.PMJobName=Gmail\ -\ Re:\ Library\ Question! com.apple.print.JobInfo.PMJobOwner=~Lindsey\ Rae~ com.apple.print.PageToPaperMappingMediaName=Letter com.apple.print.PageToPaperMappingType..n.=1 com.apple.print.PrinterInfo.PMColorDeviceID..n.=14757 com.apple.print.PrintSettings.PMColorSpaceModel..n.=2 com.apple.print.PrintSettings.PMColorSyncProfileID..n.=285 com.apple.print.PrintSettings.PMCopies..n.=1 com.apple.print.PrintSettings.PMCopyCollate..b. com.apple.print.PrintSettings.PMDestinationType..n.=1 com.apple.print.PrintSettings.PMFirstPage..n.=1 com.apple.print.PrintSettings.PMLastPage..n.=2147483647 com.apple.print.PrintSettings.PMPageRange..a.0..n.=1 com.apple.print.PrintSettings.PMPageRange..a.1..n.=2147483647 cupsBorderlessScalingFactor=1.00 DestinationPrinterID=Epson_Stylus_NX430 EPIJ_ACam=0 EPIJ_AFil=0 EPIJ_AGai=1 EPIJ_APFPrvID=7 EPIJ_APri=2 EPIJ_ATon=7 EPIJ_Bdls=0 EPIJ_BkPr=0 EPIJ_Brit=0 EPIJ_BSSv=0 EPIJ_CCor=3 EPIJ_CMat=0 EPIJ_Cont=0 EPIJ_Cyan=0 EPIJ_DCCT=0 EPIJ_DoneOpnr=0 EPIJ_ECAv=0 EPIJ_ENAL=1-1_2-1_3-1_4-1 EPIJ_ERGB=0 EPIJ_exmg=2 EPIJ_Gamm=0 EPIJ_HdofClSp=0 EPIJ_Hori=0 EPIJ_IconQual=6 EPIJ_Ink_=1 EPIJ_Mage=0 EPIJ_Manu=0 EPIJ_Medi=0 EPIJ_Mode=3 EPIJ_OPT_Bi_D=1 EPIJ_OSCMProf=1 EPIJ_OSColMat=1 EPIJ_PageRegion=Letter EPIJ_PageSize=Letter EPIJ_PrStgAlK=0 EPIJ_PSrc=2 EPIJ_Qual=43 EPIJ_REye=0 EPIJ_Satu=0 EPIJ_Silt=0 EPIJ_Size=4 EPIJ_UEpL=0 EPIJ_Yell=0 EPIJClientInfo=1 EPIJProfileSpec=1 EPIJSharedClient=0 EPIJSystemLanguage=en EPSON.PrintModule.Setting.ApplicationPageRect..a.0=0.00000000000000 EPSON.PrintModule.Setting.ApplicationPageRect..a.1=0.00000000000000 EPSON.PrintModule.Setting.ApplicationPageRect..a.2=775.19995117187500 EPSON.PrintModule.Setting.ApplicationPageRect..a.3=595.19997596740723 EPSON.PrintModule.Setting.ApplicationPaperRect..a.0=-8.40002441406250 EPSON.PrintModule.Setting.ApplicationPaperRect..a.1=-8.39999961853027 EPSON.PrintModule.Setting.ApplicationPaperRect..a.2=783.59997558593750 EPSON.PrintModule.Setting.ApplicationPaperRect..a.3=603.60000038146973 EPSON.PrintModule.Setting.Encoding..n.=0 EPSON.PrintModule.Setting.PrinterName=EPSON\ Epson\ Stylus\ NX430(2,0) EPSON.PrintModule.Setting.SystType..n.=3072 media=Letter MediaType=0 PaperInfoIsSuggested..b. PDEChangeControl= PDEiPhotoPreset..n.=0 PDEOpenHelpCount..n.=0 PDEOpenHideOption..n.=0 PDEOpenPane..n.=0 printer-resolution=360x360dpi pserrorhandler-requested=standard Resolution=360x360dpi job-uuid=urn:uuid:d1a6cae9-8a69-3c11-5569-6e3fe0c99e1b job-originating-host-name=localhost time-at-creation=1361493124 time-at-processing=1361493124 job-impressions=1 com.apple.print.PrintSettings.PMTotalSidesImaged..n.=1 sides=one-sided Duplex=None com.apple.print.PrintSettings.PMTotalBeginPages..n.=1 PageSize=Letter"
D [21/Feb/2013:18:32:23 -0600] [Job 446] argv[6]="/private/var/spool/cups/d00446-001"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[0]="<CFProcessPath>"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[1]="CUPS_CACHEDIR=/private/var/spool/cups/cache"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[2]="CUPS_DATADIR=/usr/share/cups"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[3]="CUPS_DOCROOT=/usr/share/doc/cups"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[4]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[5]="CUPS_REQUESTROOT=/private/var/spool/cups"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[6]="CUPS_SERVERBIN=/usr/libexec/cups"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[7]="CUPS_SERVERROOT=/private/etc/cups"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[8]="CUPS_STATEDIR=/private/etc/cups"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[9]="HOME=/private/var/spool/cups/tmp"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[10]="PATH=/usr/libexec/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[11]="[email protected]"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[12]="SOFTWARE=CUPS/1.5.4"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[13]="TMPDIR=/private/var/spool/cups/tmp"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[14]="USER=root"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[15]="CUPS_MAX_MESSAGE=2047"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[16]="CUPS_SERVER=/private/var/run/cupsd"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[17]="CUPS_ENCRYPTION=IfRequested"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[18]="IPP_PORT=631"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[19]="CHARSET=utf-8"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[20]="LANG=en_US.UTF-8"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[21]="APPLE_LANGUAGE=en-US"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[22]="PPD=/private/etc/cups/ppd/Epson_Stylus_NX430.ppd"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[23]="RIP_MAX_CACHE=128m"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[24]="CONTENT_TYPE=application/pdf"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[25]="DEVICE_URI=dnssd://Epson%20Stylus%20NX430._pdl-datastream._tcp.local. /?bidi"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[26]="PRINTER_INFO=Epson Stylus NX430"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[27]="PRINTER_LOCATION="
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[28]="PRINTER=Epson_Stylus_NX430"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[29]="PRINTER_STATE_REASONS=com.epson.status-reply.20130218-152656.00.d1.40 424443205354320d0a3700010104060201ff0f0d0301001a05032104026403013a100301094e1301 01190c0000000000756e6b6e6f776e24020000370502000000000000000000000000000000000000 00000000000000000000000000000000000000000000000,com.epson.status-reply.20130218- 152656.01.d1.0000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000,com.epson.status- reply.20130218-152656.02.5f.0000000000000000000000000000000000000000000000000000 000000000000000000000000000000000000000000"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[30]="CUPS_FILETYPE=document"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[31]="FINAL_CONTENT_TYPE=printer/Epson_Stylus_NX430"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[32]="AUTH_I****"
D [21/Feb/2013:18:32:23 -0600] [Job 446] Started filter /Library/Printers/EPSON/InkjetPrinter2/Filter/pdftopdf2.app/Contents/MacOS/pdft opdf2 (PID 830)
D [21/Feb/2013:18:32:23 -0600] [Job 446] Started filter /usr/libexec/cups/filter/cgpdftoraster (PID 831)
D [21/Feb/2013:18:32:23 -0600] [Job 446] Started filter /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII (PID 832)
D [21/Feb/2013:18:32:23 -0600] [Job 446] Started backend /usr/libexec/cups/backend/dnssd (PID 833)
D [21/Feb/2013:18:32:23 -0600] [Job 446] Resolving "Epson Stylus NX430._pdl-datastream._tcp.local."...
D [21/Feb/2013:18:32:23 -0600] [Job 446] STATE: +connecting-to-device
D [21/Feb/2013:18:32:23 -0600] [Job 446] Resolving "Epson Stylus NX430", regtype="_pdl-datastream._tcp", domain="local."...
D [21/Feb/2013:18:32:23 -0600] [Job 446] Looking for printer.
D [21/Feb/2013:18:32:23 -0600] [Job 446] Set job-printer-state-message to "Looking for printer.", current level=INFO
D [21/Feb/2013:18:32:23 -0600] [Job 446] Resolved as "socket://EPSON150AA8.local.:9100/"...
D [21/Feb/2013:18:32:23 -0600] [Job 446] STATE: -connecting-to-device,offline-report
D [21/Feb/2013:18:32:23 -0600] [Job 446] Executing backend "/usr/libexec/cups/backend/socket"...
D [21/Feb/2013:18:32:23 -0600] [Job 446] STATE: +connecting-to-device
D [21/Feb/2013:18:32:23 -0600] [Job 446] Looking up "EPSON150AA8.local."...
D [21/Feb/2013:18:32:23 -0600] [Job 446] cgpdftoraster - copying to temp print file "/private/var/spool/cups/tmp/0033f51343e87"
D [21/Feb/2013:18:32:23 -0600] [Job 446] backendWaitLoop(snmp_fd=7, addr=0x109e143e8, side_cb=0x109d5b0cf)
D [21/Feb/2013:18:32:23 -0600] [Job 446] `/private/var/spool/cups/tmp/0033f51343e87' has 1 pages.
D [21/Feb/2013:18:32:23 -0600] [Job 446] cgpdftoraster - opened PPD file "/private/etc/cups/ppd/Epson_Stylus_NX430.ppd"...
D [21/Feb/2013:18:32:23 -0600] [Job 446] cgpdftoraster: size->width = 612, size->length = 792, size->top = 783.6, size->bottom = 8.4, size->left = 8.4, size->right = 603.6
D [21/Feb/2013:18:32:23 -0600] [Job 446] cgpdftoraster: PreferredRotation = -90
D [21/Feb/2013:18:32:23 -0600] [Job 446] cgpdftoraster - languageLevel = 3, mediaBox.size.width = 612, mediaBox.size.height = 792
D [21/Feb/2013:18:32:23 -0600] [Job 446] STATE:
D [21/Feb/2013:18:32:23 -0600] [Job 446] Vendor matching mode is ON and the handoff color space requested is sRGB.
D [21/Feb/2013:18:32:23 -0600] [Job 446] cgpdftoraster: band width = 2976, bytesPerRow = 11904, band height = 880, height = 3876
D [21/Feb/2013:18:32:23 -0600] [Job 446] cgpdftoraster: context width = 2976, height = 880, bitsPerComponent = 8, bitsPerPixel = 32, bytesPerRow = 11904, bitmapInfo = 5, resolution = (360.000000, 360.000000)
D [21/Feb/2013:18:32:23 -0600] [Job 446] NOT using display list
D [21/Feb/2013:18:32:23 -0600] [Job 446] cgpdftoraster: bytes written for sheet 1 = 7856640
D [21/Feb/2013:18:32:23 -0600] [Job 446] End of messages
D [21/Feb/2013:18:32:23 -0600] [Job 446] printer-state=3(idle)
D [21/Feb/2013:18:32:23 -0600] [Job 446] printer-state-message="/Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoes cpII.app/Contents/MacOS/rastertoescpII failed"
D [21/Feb/2013:18:32:23 -0600] [Job 446] printer-state-reasons=none
E [21/Feb/2013:18:37:24 -0600] [Job 446] Stopping unresponsive job!

7210 will no longer print.

Similar Messages

Maybe you are looking for