8.1 Time Synch Issues

Has anyone experienced problems with internet time syncing. When I turn my desktop on it is never at the right time and I have to manually correct it. I have scanned etc for a possible virus but the system returns a clean bill of health. The machine is a
Lenovo H520 and I have checked the motherboard with the Lenovo proprietary software which also reports all is well.
Additionally this computer has started powering on when the wall power outlet is switched to the on position with no input from me at the actual machine on button. Any suggestions would be appreciated as I have researched for a solution but came up empty
handed.

It should be a faulty BIOS battery, and probably something to do with SMPS since iyt powers on without the push button on the CPU.
I would suggest you to check with Dell on battery, as well as power button fault.
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Similar Messages

Snow Leopard 10.6.2 - Time Synch Issue

Hi,
I have an older MBP that was just rebuilt with Snow Leopard. Everything is working fine but a weird issue I ran into which is the system time. The date and time is set in System Preferences for CST and using an NTP server. The displayed time is correct. Here is what I ran into and my attempts at troubleshooting.
Details:
1.Entourage displays message 6 hours ahead
2.Tried Outlook through Citrix on the MBP and the message times are off by 6hrs as well
3.Tried Outlook through Citrix with a different AD acct. Problem still exists.
4.Tried Outlook through Citrix on another system and the message times are correct
5.Tried logging in as admin on the MBP and tried Outlook thru Citrix. Problem still exists.
6.Played with Date/Time settings in System Preferences by changing zones and going back to CST
7.In Terminal, the time displayed after running DATE is off by 6hrs and shows it using UTC
8.I modified the NTP.conf file to use tick.usno.navy.mil and still see the time off running DATE in Terminal
9. Manually set the time. No success.
Any suggestions would be greatly appreciated.
Thanks,
Paolo

Not sure what your trouble is, but you might try these ntp command to get more info about time. I am guessing that ntp is fine, but that Outlook and Entourage are looking somewhere strange for the timezone information. I am using the ntp pool to get time...
In /etc/ntp.conf:
server time.apple.com
server 0.us.pool.ntp.org minpoll 12 maxpoll 17
server 1.us.pool.ntp.org minpoll 12 maxpoll 17
server 2.us.pool.ntp.org minpoll 12 maxpoll 17
server 3.us.pool.ntp.org minpoll 12 maxpoll 17
server 0.north-america.pool.ntp.org minpoll 12 maxpoll 17
server 1.north-america.pool.ntp.org minpoll 12 maxpoll 17
server 2.north-america.pool.ntp.org minpoll 12 maxpoll 17
# ... and use the local system clock as a reference if all else fails
# NOTE: in a local network, set the local stratum of one stable server
# to 10; otherwise your clocks will drift apart if you lose connectivity.
server 127.127.1.0
fudge 127.127.1.0 stratum 13
In ntpq, the "*" says which server is being using at the moment.
ntpq -p
remote refid st t when poll reach delay offset jitter
==============================================================================
*time6.apple.com 17.72.133.55 2 u 563 1024 377 115.966 -10.589 154.758
ool-4a5827e8.dy 129.6.15.29 2 u 1085 68m 3 100.529 -29.152 30.756
ntp.yoinks.net 129.7.1.66 2 u 1048 68m 3 321.470 -124.26 127.291
lime7.adamantsy 66.96.98.9 3 u 1063 68m 3 357.534 -145.33 130.226
clock.team-cymr 192.168.0.16 2 u 1088 68m 3 274.057 -110.85 113.097
ntp1.housing.be 169.229.128.214 3 u 1077 68m 3 415.429 -157.87 157.765
72-9-108-133.re 67.128.71.65 3 u 1048 68m 3 266.445 -116.93 121.686
ntp2.housing.be 128.32.206.54 2 u 1094 68m 3 394.899 -155.73 146.651
LOCAL(0) .LOCL. 13 l 61 64 377 0.000 0.000 0.001
+wilmot.unh.edu 204.9.136.253 3 u 400 1024 377 42.159 -2.401 258.736
This trace is okay. Not all hosts allow traces to go through:
ntptrace
localhost: stratum 3, offset -0.004231, synch distance 0.329392
17.151.16.22: timed out, nothing received
ntpdc -c loopinfo
offset: -0.004231 s
frequency: -3.348 ppm
poll adjust: 10
watchdog timer: 841 s
checking your timezone:
ls -l /etc/localtime
lrwxr-xr-x 1 root wheel 36 Dec 28 16:22 /etc/localtime -> /usr/share/zoneinfo/America/New_York

Synching Issues with iphone 4/ itunes

When attempting to synch my iphone with itunes, the synch cannot progress past the "backing up" stage. Why?? Getting a bit frustrated now to be honest.
Every time I plug my phone into the computer, itunes informs me of the latest update required (4.3.5), but because of the synching issue, I obviously can't get the new update.
any help appreciated

"iTunes could not back up the iPhone "Guru's iPhone" because the backup was corrupt or not compatible with the iPhone. Delete the backup for this iPhone, then try again."
The above is the error message I receive when trying to upgrade/ synch my iPhone with iTunes on my Laptop. I have the latest version of iTunes available (10.4.1)

12 bit audio synch issues

Hey all. I have a queation regarding 12 bit audio synch problems. I have digitized a tape recorded with 12 bit audio and am just now coming into video/audio synch issues and was wondering if anyone might have a workflow suggestion. Soecific questions are -
1 - Can I export the troubled clips to quicktime/ resample them at 16 bit and reimport?
2 - Some of the clips I already have edited and are in synch, do I need to correct them as well or will final cut do that on export?
3 - If I get a 12 bit/16 bit mixed bag on my timeline, can I export the mix to 2 track and convert before exporting it to compression?
ANy suggestions on how to work through this would be appreciated. I seem to have a lot of people coming to me with this setting and would like to know of any viable workflow solutions.
Thanks

1. Yes. Quicktime Pro, iTunes or third party audio editing software such as Peak can resample to 48khz/ 16 bit.
2. It would be best if you can get everything in the timeline to be 48khz/16 bit.
3. See #2.
Dope slap these fools who bring you 32khz stuff. Charge them MUCHO extra for your time.
x

Audio Synch issue

Hi,
So I have a .mov source file that contains footage captured from a Sony MiniDV camera (don't ask me why we were still using that in November of last year) and I believe I possibly screwed up the capture settings. The footage is 50 minutes of uncut interview and the audio gradually falls out of synch so that by the end it's about a half to a full second slower than the video. We need to edit the file simply to trim the ends so we have a clean fade in and out.
Here's the info on the file as displayed by the Finder
I imported it into Premiere Pro CS6, put it onto a sequence, and clicked "change sequence settings" to match the clip settings.
Here are the resulting settings:
I unlinked the audio track and moved it so that the sound of the two people high fiving was synched with the video. I cut both the video and audio tracks at that frame, deleted what came after the cut, and moved the audio back to its original position. I then looked at the duration of the video track, and adjusted the duration of the audio track to match. The result was that the audio speed was adjusted to 100.03%, and appeared synched throughout the video.
I thought I had solved my problem; however, when I exported the video the audio went back to falling out of synch slowly, exactly as it does in the source file.
I exported it initially as Format: H.264, Preset: NTSC DV. Then I exported it as H.264, Youtube HD 720p 23.976. Neither worked. The sample rate for both was 48 kHz, so unless I am mistaken, that matched the rate from the source audio.
This is beyond my technical ability and I don't know where to begin fixing it at this point. I no longer have the tape that the footage was on so I can't recapture it. How do I synch the audio and video?
Any help would be much appreciated.
Thanks!
Collin

Yes, the second export that I tried was with the Preset that is YouTube HD 720p 23.976. I've done this before with DV footage and it works fine, all that happens is that there are two thick black bars on the sides of the video. I only did this for one of the exports on this particular project though. The first time I tried to export it it was with the NTSC DV preset, and the synch issue was still a problem. So it is independent of the pixel ratio.

Lip Synch Issue?

Is anyone else experiencing a significant lip synch issue when using an optical (sound) / HDMI (video) setup?
I've been experiencing this since the new iPlayer update on a black box a couple of months ago to some degree. It wasn't too bad, but I had the box replaced last week when it developed a hardware fault. It had the non iPlayer release (bliss!), but on Monday the new update was applied overnight. The sound issue has come back with a vengeance - a lot worse than before. This is the first time I have used the latest (new style) release. This is happening on live TV.
After almost 3 years of uninterupted stable service, this iPlayer nonsense has really got me considering ditching Vision...
Thanks, Mark.

Guyincognito76 wrote:
Urm? And why aren't you using HDMI for the sound as well, is the HDMI going into the telly and the optical into a surround?
If the Vision box is playing sound correctly if connected directly to the TV then it must be the surround.
It's connected to a surround sound receiver that doesn't have HDMI inputs (just optical and component connections). It's not the receiver that is the problem as it works perfectly with BluRay, Wii, and Freesat. It also worked with no issues on the Vision box have until the new software release was applied on Monday.
The BT engineer that came out to fix the fault with the previous bit of kit admitted that the hardware is very reliable, but the software releases have caused a lot of issues for them. A bit of extra testing would be good before BT ship these releases out to everyone.

Suddenly Comcast Sportsnet HD channel has lip synch issues

The past few days, Channel 577, which is Comcast Sportsnet New England in my (Boston) area, has lip synch issues. It appears to be the only channel with this issue, and the SD version of the CSNNE station (77) is fine. Since it is only this one channel I believe it must be something with the station itself, but I'm wondering if I can fix it myself somehow. Perhaps reset of the set-top box, or unplug and plug in the HDMI cable again? It's just this one channel, though, so I'm trying to avoid any changes of settings on my receiver, set top box or TV, etc.
Any ideas? Or should I just report this to Verizon's support line?
Thanks.

are you watching on a dvr? I've found sometimes that when I am watching on my dvr and a lip sync issue crops up, I can pause the show for 2-3 seconds and then press play (so I am watching it "delayed") and that solves the problem. Dont know why this works but it does most of the time for me. YMMV
====================================================================================
Error exists between keyboard and chair.

Excise Part 1 updation at the time of issue.

Hi,
I am having one requirement regarding RG23 A part 1 updation at the time of issue.
1) How the register part 1 updated at the time of goods issue.
2) I purchased one material from two different vendor. One is excise unit & other is non excise.
At the time of goods issue to shop floor how the system determine that this issue is from excisable material or non excisable material.And accrdingly how will update part 1 entries.
Every time i will go to J1I5 transaction for updation of RG23 A or it will update automatically.
Regards,
Dinesh

Hi Sathish ,
In CIN - basic settings - Maintain excise groups there in that outgoing excise invoice Excise invoice during the billing and Create and post inv in single make the both fields un mark.
Hope this will make you to create invoice and excise invoice separately, or els find if any exit is used earlier.
Check and revert
Regards
Ram

I purchased 2 books for my iPad and they downloaded successfully. They show up in iTunes when my iPad is connected to my Mac but do not show up on the Mac. Is this a synch issue? When I click the Synch box I am warned that downloads on my iPad will be

i purchased 2 books for my iPad and they downloaded successfully. They show up in iTunes when my iPad is connected to my Mac but do not show up on the Mac. Is this a synch issue? When I click the Synch box I am warned that downloads on my iPad will be erased. Is that true? My ultimate goad is to be able to read the books on my iPhone as well. Thanks.

You should be able to copy them to your computer's iTunes via File > Transfer Purchases and you can then sync them to the iPhone (or you could re-download them directly on the iPhone)

I think I solved my time changing issues- hope this helps

Hey everyone, I think I've had some success with my time changing issues. I originally posted this to another user as a follow up to her question, but I'm reposting it here. Hope it helps:
"msteinny,
So i went to the apple store to meet with an apple genius to ask him why my phone's time kept moving up 1 hour everytime I synced my phone. Well he said that he's never seen this problem before, and after a trying a reset and restore he let me exchange my phone. The problem is that when I went to sync my new phone the problem still persisted. They told me it was probably something to do with my computer and its time zone settings.
So I get home and click on my computers clock in the bottom right hand corner to bring up the date and time properties and sure enought my time is correct, the date is correct and the time zone is correct (Eastern Daylight Time). So I look through the different tabs (Date & Time, Time Zone, Internet Time). The first thing I tried to do was to change where my computer syncs its internet time. It was originaly set on NIST time. I then switched it to Windows time, but this didn't do anything. My clock would still change when I synced to itunes. The next thing I tried was fideling around in the Time Zone tabs. I noticed that the box that says "Automatically adjust clock for daylight savings" was unchecked, so I checked it and my computer's time jumped an hour ahead. So I left the box checked but moved my clock one hour back (to the correct time), clicked on apply and left it at that. I synced my iPhone and voila! The time didn't change! It stayed on the correct time! To to make a long story short, make sure that you computer's clock is set on "automatically adjust clock for daylight savings changes, make sure your time zone is correct, and that the time is right when that box is checked. I hope this helps you. I'm glad I got a new phone out of the deal;)
Chris P. "

As I mentioned in my post, whenever I checked that box the time would be incorrect. It would move up an hour. I've messed with this along time ago, way before I got my iphone. I think this had something to do with the daylight savings change that was implemented this year or last year. I dont remember if I never tried correcting it before, or if I couldn't, but this time I didn't have any problems correcting it. Anyway, since I couldn't correct it back then, I just left the box uncheck and decided that I would change the time manually when the next time change occurs. But it seems to work fine now so all is well.

The Java plugin has created a time unfriendly issue with my e-mail account, I can not open or send any e-mail without using this plugin, how can I eliminate this problem without dropping m. firefox?

A few days ago I tried to e-mail a friend, when I started A box came up and it required me to add a plugin..Java. I contacted my e-mail courier and microsoft, they told me that is was a plugin from Mozilla Firefox. Since then I must go through Java to send or open an e-mail... this is NOT to my satisfaction, it takes too long for all of this to open and if it is not cleared , I am dropping Mozilla and going elsewhere. Why has this occurred? Is this a result of the last update? If so can I delete the last update and continue on the other version?
== This happened ==
Every time Firefox opened
== last week

Sorry, I have no idea what you mean by '''"The Java plugin has created a time unfriendly issue with my e-mail account, I can not open or send any e-mail without using this plugin,"'''.
If you think your problem is caused by the Java plugin, you should visit the Java support forum for assistance.
http://forum.java.sun.com/index.jspa
If you could explain what you mean by '''"time unfriendly''' issue with my e-mail account", maybe we'll be able to help you solve that issue.
It might be helpful for us if we knew exactly which web-mail provider you are using. It seems strange to me that viewing or sending web-mail would actually "need" Java for operation, its more likely that some other item on the web page needs Java to run some advertising or other garbage that isn't a necessary part of the web-mail functionality you want to use.

FM - Budget check at the time of procurement and at the time of Issue

Hi
For a Material there is a budget for a procurement ( Check should happen at the time of procurement and a seperate budget for consumption ( Check should happen at the time of issue).How can I map this in FM- BCS.I am thinking of creating two commitmen items one for Procurement , to be derived thorugh matl grp at the time of PR / PO and One commitment item for consumption to be derived through consumption GL . Does it work , any comments?
Thanks in advance
Chris

Yes you are right , I have to make to sure stock budget doesn't get credited.
If you remember in one of my other threads, i wanted to derive commitment item from Matl grp, it was for this purpose. I will derive commitment through matl group at the time of procurement / GR etc and assign a dummy commitment item to stock a/cs. Where as i will derive a consumption commiment item from consumption GLs.
Thank you
Chris

Different G/L code at the time of issue for projects .

Dear all;
here there is requirement :
Say we are having three different WBS element .for a particular Material ,at the time of issue it should goes to different G/L Code.How to map this in SAP system .
I have configured in OBYC setting as below :
GBB
Valueation Modifier general Modifier valueation Class G/L account
1101 VBR 3000(Raw Mat) XYZ
Kindly give me some solut

Do you mean that every time you issue for a particular WBS element it should post to a differnt G/L account.
If thats you requirement then its not possible to post to a new G/L account every time when you are issuing a material.
The G/L account is determined based on the movement type, and creating new movement type every time to post into a G/L account is not feasible solution.
What you can do is post into a differnt cost object like a profit center or cost center to track down the costs by posting them at the time of Goods issue.
Thanks & Regards
Kishore

OTM - At the time of issue handling status is updated each time

Hello,
While handling the issue till the time it get fixed, each time the status gets updated but not maintaining the status history along with the description and solution. We need to figure out the status history .

Do you mean that every time you issue for a particular WBS element it should post to a differnt G/L account.
If thats you requirement then its not possible to post to a new G/L account every time when you are issuing a material.
The G/L account is determined based on the movement type, and creating new movement type every time to post into a G/L account is not feasible solution.
What you can do is post into a differnt cost object like a profit center or cost center to track down the costs by posting them at the time of Goods issue.
Thanks & Regards
Kishore

Any report to identify Time Constraint issues?

Hello,
Is there a report that I can run to get the employees and Infotype records with time constraint issues? So until last week, we had not turned on the PC-UI switch in T77S0 table. So the way it worked was, if in history there were 2 records with time gaps for Infotype with time constraint = 1, then it still allowed us to create new records. Now with the switch turned on, it gives an error. Once the historic records are corrected, it allows us to proceed. This is freaking out a lot of data specialists, and we were wondering if we can proactively identify the employees with these historic data inconsistencies and be able to correct them. Please let me know.
Thanks,
Nakul

Found it: RPUSCNTC
Thanks,
Nakul

8.1 Time Synch Issues

Similar Messages

Maybe you are looking for