8.3 SP1 tested configuration JDK for WebLogic Server (App Server)

The base 8.3 had JRockit JDK as well as Sun JDK as a tested configuration.
Later 8.3 SP1 only has Sun JDK as a tested configuration.
Can anyone comment on this. If I decide to deploy 8.3 SP1 with the latest hotfix available should I just use the tested Sun JDK for the app server?

JRockit JDK is supported with P6 EPPM 8.3 SP1 and any latest hotfix. The tested configuration for SP1 and above is an indication that additional certification of latest JDK has been done. It does not necessarily mean you need to upgrade to it although recommended. Review the SP1 patch readme for more information.

Similar Messages

  • Supporting JDK for weblogic 12.1.2.0

    Hi,
           We have installed weblogic 12.1.2.0 with RHEL 5.6 and oracle hotspot JDK 1.7_15.
           We are running the server side applications in "Production Mode", my doubt is whether the above mentioned JDK is recommended to run the server in Production Mode.  I didn't found any  
           suitable JRockit JDK for this weblogic 12.1.2.0 release.  Please provide any information regarding this. 
    Regards,
    Ananda Krishnan S

    Hello Ananda,
    Though MOS Certification tab shows that JRockit 6u33 R28.2.4+ is certified to run with WLS 12c(12.1.2.0) on RedHat Linux5, I do NOT encourage you to go for that in your PROD environment for the following notes:
    1. Oracle JRockit Not Supported For Execution of WebLogic Server 12.1.2 Server Applications:
    http://docs.oracle.com/middleware/1212/wls/WLSRN/issues.htm#BCFBDIEG
    2. JRF Domains Do Not Support JRockit in 12.1.2:
    http://docs.oracle.com/middleware/1212/core/RNINF/upgrade.htm
    3. The same info can be verified downloading the following file inclided in "Oracle Fusion Middleware Supported System Configurations" OTN page:
    http://www.oracle.com/technetwork/middleware/fusion-middleware/documentation/fmw-1212certmatrix-1970069.xls
    All the above notes tells/clarifies the same info:
    In Oracle Fusion Middleware 12.1.2. JRockit is supported only for WebLogic Server client-side applications, but not for execution of WLS server applications.
    Hope that helps,
    Murad

  • Configuring Log4j for weblogic

    Hi
    can any one tell me how to configure Log4j for weblogic. I have added the log4j jar files to the weblogic classpath but it does not seem to work..
    Thanks and Regards
    Narayan

    You must make a new directory on the same level with applications directory, place "log4j.properties" file in it, include this directory in the "PRE_CLASSPATH" entry in your startup script and that's all.
    Sample line in "startWebLogic.cmd" script
    'set PRE_CLASSPATH=%_LIBJARS%;classes'
    in classes dir you have "log4j.properties"
    Should work,
    Cristian Negoita

  • Examples.cluster.rmi for WebLogic Server 11g

    How can I get package examples.cluster.rmi for WebLogic Server 11g?
    I would like to perform a similiar test like the following:
    https://freepaper.taichung.gov.tw/examplesWebApp/examples/src/examples/cluster/rmi/package-summary.html
    Thanks a lot

    Hi,
    I have just now installed WLS via the net installer, and the default examples server password of welcome1 does indeed work for me.
    However, I note from your post that you are using port 7101, not 7001. Could that be the issue?
    http://localhost:7101/console/login/LoginForm.jspKevin

  • Failed to start Admin Server for Weblogic Server Domain

    I Created a domain named mydomain in weblogic server 10.3 in server 2003.But when i start Admin Server for Weblogic Server Domain from startmenu, it failed.
    I examined the log under domains\mydomain\servers\AdminServer\logs\AdminServer.log and got the following information:
    java.lang.NoClassDefFoundError:weblogic/ldap/EmbeddedLDAPChange
    at weblogic.ldap.EntryChangeListenerImpl.receiveEntryChanges(EntryChangeListenerImpl.java:28)
    Caused by :java.lang.ClassNotFoundException: weblogic.ldap.EmbeddedLDAPChange
    at java.net.URLClassLoader$1.run(URLClassLoader.java:199)
    Caused by :java.util.zip.ZipException: error reading zip file
    at java.util.zip.ZipFile.read(Native Method)
    at java.util.zip.ZipFile.access$1200(ZipFile.java:29)
    weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: A failure occurred attemping to load LDIF for provider RoleMapper from file ...\domains\mydomain\security\XACMLRoleMapperInit.ldift.
    at ...(CommonSecurityServiceManagerDelegateImpl.java:465)
    Caused by: com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: A failure occurred attemping to load LDIF for provider RoleMapper from file ...\domains\mydomain\security\XACMLRoleMapperInit.ldift.
    at .. (ServiceEngineImpl.java:365)
    Caused by: com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: A failure occurred attemping to load LDIF for provider RoleMapper from file ...\domains\mydomain\security\XACMLRoleMapperInit.ldift.
    at .. (BootStrapServiceImpl.java:910)
    Caused by: <openjpa-1.1.1-SNAPSHOT-r422266:891341 nofatal user error>kodo.jdo.UserException: This operation cannot be perfomed while a Transaction is active.
    at org.apache.openjpa.kernel.BrokerImpl.close(BrokerImpl.java:4087)
    ####<Critical><WebLogicServer><SOA><Adminserver><main><<WLS Kernel>><><><1282012271468><BEA-000362><Server failed. Reason:
    There are 1 nested errors:
    weblogic.security.service.SecurityServiceRuntimeException: [Security:090399] Security Services Unavailable
    at weblogic.security.service.CommonSecurityserviceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:916)
    I ignored some detailed error message.The runtime environment is server 2003 Enterprise Edition sp2.
    Thx in advance for any reply.

    Hello Djam,
    Please review the following:
    The FMW WebLogic Server (WLS) installation has been configured to use a non-default Java temporary files directory,
    i.e. the following has been set in the WebLogic startup or setDomainEnv.sh script:
    EXTRA_JAVA_PROPERTIES="-Djava.io.tmpdir=/appl/oracle/temp_java_files ${EXTRA_JAVA_PROPERTIES}"
    Reference: How to Change the WebLogic Server Location for Temporary Files (Doc ID 1336002.1)
    When the Middleware home was restored the directory specified by java.io.tmpdir parameter was missing,
    Therefore an IOException occurred when opening the wallet and WLS was unable to initialize the OPSS successfully.
    To resolve the issue re-create the directory specified by the java.io.tmp dir parameter, and make sure the owner and group access are the same as for the FMW installation.
    Unable Start AdminServer: JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOException (Doc ID 1923395.1)
    Bogdan

  • Missing license file for : WebLogic Server 6.1

    Hi there,I just installed the weblogic server and want to test the mssqlserver4 driver. I run the example.jdbc.mssqlserver4.ThreadTests.java. I met this kind of erro message:ThreadsTests - exception java.sql.SQLException: java.sql.SQLException: $$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$Missing license file for: WebLogic Server 6.1$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$I do not know why.Philip

    Check to make sure that the directory in which you have a valid license file
    "license.bea" is included in your CLASSPATH.
    -Utpal
    "Philip" <[email protected]> wrote in message
    news:3ba8e9be$[email protected]..
    Hi there,I just installed the weblogic server and want to test themssqlserver4 driver. I run the example.jdbc.mssqlserver4.ThreadTests.java. I
    met this kind of erro message:ThreadsTests - exception
    java.sql.SQLException: java.sql.SQLException: $$$$$$$$$$$$$$$$ License
    Exception $$$$$$$$$$$$$$$$Missing license file for: WebLogic Server
    6.1$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$I do not know
    why.Philip

  • Kerberos Configuration Manager for SQL Server: Access of system information failed!

    I'm trying to use the new Kerberos Configuration Manager for SQL Server tool that was released recently to verify SPN on several SQL Servers, but any time I attempt to connect to a server I get the following error in the log:
    6/24/2013 3:48:22 PM Info: Connect to WMI, \\<HOSTNAME>\root\cimv2
    6/24/2013 3:48:25 PM Error: Access of system information failed System.DirectoryServices.AccountManagement.PrincipalOperationException: An error (1332) occurred while enumerating the group membership.  The member's SID could not be resolved.
       at System.DirectoryServices.AccountManagement.SAMMembersSet.IsLocalMember(Byte[] sid)
       at System.DirectoryServices.AccountManagement.SAMMembersSet.MoveNextLocal()
       at System.DirectoryServices.AccountManagement.SAMMembersSet.MoveNext()
       at System.DirectoryServices.AccountManagement.FindResultEnumerator`1.MoveNext()
       at System.Linq.Enumerable.Contains[TSource](IEnumerable`1 source, TSource value, IEqualityComparer`1 comparer)
       at KerberosCM.WMIHelper.isUserLocalAdmin(SystemInfo si, UserPrincipal user)
       at KerberosCM.WMIHelper.getUserInfo(SystemInfo mi)
    6/24/2013 3:48:25 PM Error: Error System.Exception: Access of system information failed!
       at KerberosCM.WMIHelper.getUserInfo(SystemInfo mi)
       at KerberosCM.SystemInfo.GetInfo()
       at KerberosConfigMgr.Utility.Login(String serverName, String login, String password, Boolean isCmdLine, Form uiForm)
    Things I have tried to resolve this:
    1. Verified that my account is a Domain Admin.
    2. Attempt to connect locally without inputting any information for server/user/pw
    3. Attempt to connect remotely using server/user/pw
    I always receive the same error message and log: Access of system information failed!
    Has anyone else run into this issue?

    Update to this:
    There were some invalid user accounts added to the Local Administrators group only showing up as a GUID. This caused the enumeration of the group to fail and generate the error in my original post. Removing those user accounts from the Administrators group
    got past the enumeration error.
    However, now when attempting to connect to the servers (locally or remotely) I get this error:
    6/27/2013 10:24:24 AM Info: Connect to WMI, \root\cimv2
    6/27/2013 10:24:38 AM Error: Access of system information failed System.Runtime.InteropServices.COMException (0x80070035): The network path was not found.
       at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail)
       at System.DirectoryServices.DirectoryEntry.Bind()
       at System.DirectoryServices.DirectoryEntry.get_AdsObject()
       at System.DirectoryServices.PropertyValueCollection.PopulateList()
       at System.DirectoryServices.PropertyValueCollection..ctor(DirectoryEntry entry, String propertyName)
       at System.DirectoryServices.PropertyCollection.get_Item(String propertyName)
       at System.DirectoryServices.AccountManagement.SAMStoreCtx.ResolveCrossStoreRefToPrincipal(Object o)
       at System.DirectoryServices.AccountManagement.SAMMembersSet.MoveNextForeign()
       at System.DirectoryServices.AccountManagement.SAMMembersSet.MoveNext()
       at System.DirectoryServices.AccountManagement.FindResultEnumerator`1.MoveNext()
       at System.Linq.Enumerable.Contains[TSource](IEnumerable`1 source, TSource value, IEqualityComparer`1 comparer)
       at KerberosCM.WMIHelper.isUserLocalAdmin(SystemInfo si, UserPrincipal user)
       at KerberosCM.WMIHelper.getUserInfo(SystemInfo mi)
    6/27/2013 10:24:38 AM Error: Error System.Exception: Access of system information failed!
       at KerberosCM.WMIHelper.getUserInfo(SystemInfo mi)
       at KerberosCM.SystemInfo.GetInfo()
       at KerberosConfigMgr.Utility.Login(String serverName, String login, String password, Boolean isCmdLine, Form uiForm)

  • Kerberos Configuration Manager for SQL Server is available

    This thread describes the Microsoft Kerberos Configuration Manager diagnostic tool for SQL Server. This tool is available for download from the Microsoft Download Center: 
    Download the  package now.
    About Kerberos Configuration Manager
    The Kerberos Configuration Manager for SQL Server is a diagnostic tool that helps troubleshoot Kerberos related connectivity issues with SQL Server, SQL Server Reporting Services (SSRS), and SQL Server Analysis Services (SSAS). It can perform the following
    functions:
    Collect information on operating systems and Microsoft SQL Server instances that are installed on a server.
    Report on all Service Principal Name (SPN) and delegation configurations on the server.
    Identify potential problems in SPNs and delegations.
    Fix potential SPN problems.
    More information
    This tools helps troubleshoot the following exceptions:
    401
    Note: This error message is for http errors, SSRS errors, and some other similar errors.
    Login failed for user 'NTAUTHORITY\ANONYMOUS'
    Login failed for user '(null)'
    Login failed for user ''
    Cannot generate SSPI Context
    For more information about Kerberos Configuration Manager, go to the following related blogs:
    Released: Kerberos Configuration Manager for SQL Server
    Kerberos Configuration Manager updated for Reporting Services
    Kerberos Configuration Manager updated for Analysis Services and SQL Server 2014
    Reference from the following KB article: Kerberos Configuration Manager for SQL Server is available
    Elvis Long
    TechNet Community Support

    Thanks for posting, Elvis. Can you post this to the SQL Security forum too?
    Dan Guzman, SQL Server MVP, http://www.dbdelta.com

  • Need info to configure SSL for Portal Server in EP6SP2

    Hello,
    We need to configure SSL for Portal Server. We are using J2EE 6.20 Patch 25 and EP6SP2P4. The ITS is already using https and it creats lots of Session issues since Portal is not in https.
    Is there any OSS Note or How to guide to configure Portal to use SSL.
    Thanks.
    - PK

    Hi Marcel,
    Thanx for your Post, I have a Question, we will use CISCO for load balancing and SSL termination but I have a big issue, the URL in the portal applciation is always the same ant the URL in the borwser, I guess al the other URL´s are in the Frames, how will we configure the SSL termination for the login page in example if the URL in the Browser appears always the same?
    Thanx in Advanced!!!

  • Is OIM 10.x available for WebLogic Server?

    Is OIM 10.x available for WebLogic server? The only download I see on the site for OIM 10.x is the fully bundled suite with OracleAS.

    If by OIM you mean Oracle Identity Manager, then OIM 9.1 is supported on Weblogic 10.x. OIM 9.1 is NOT part of or the same thing as Oracle Identity Management 10g. The latter is a set of services tightly coupled with Oracle's app server (OC4J). Identity Management 10g does not run on Weblogic. Some people like to say that Identity Management 10g includes all Oracle identity management products which adds to the confusion.
    Look here: http://www.oracle.com/technology/documentation/oim1014.html

  • Please let me know LDAP Configuration in Oracle Weblogic Server 10.3.2

    Hi,
    Please let me know LDAP Configuration in Oracle Weblogic Server 10.3.2.Please give me the steps to configure the LDAP in weblogic 10.3.2.

    Hi,
    You can check http://download.oracle.com/docs/cd/E15523_01/doc.1111/e14142/console.htm#i1075285

  • How can I configuration MBean in weblogic server  using the console ?

    How can I configuration MBean in weblogic server using the console ?
    I hear people talking about mbeans in weblogic server I have look in the console I can not find where , or how to do it.
    can some body explain that or a link that explain it, how to do it on the console ?

    Hi,
    Registering Custom MBeans from Admin Console is not yet possible. But yes there are ways to Configure and Utilize Custom MBeans ...
    http://weblogic-wonders.com/weblogic/2010/02/16/registering-and-invoking-custommbeans/
    Thanks
    Jay SenSharma

  • No login command was found for 'WebLogic Server 10.3.5.0 - in managed serve

    i am getting following warning when i run my web logic managed server
    No login command was found for 'WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 Oracle WebLogic Server Module Dependencies 10.3 Thu Mar 3 14:37:52 PST 2011 Oracle WebLogic Server on JRockit Virtual Edition Module Dependencies 10.3 Thu Feb 3 1.
    Would appreciate suggestions to resolve.
    Thanks.

    Hi,
    Add -Dweblogic.StdoutDebugEnabled flag while starting the managed server and then post the verbose error message in your next post
    For setting the flag follow the below steps
    If your using Linux box and not using node manager to start the managed server,add the below line startManagedWebLogic.sh file
    JAVA_OPTIONS="-Dweblogic.StdoutDebugEnabled=true ${JAVA_OPTIONS}"
    echo "JAVA_OPTIONS=${JAVA_OPTIONS}"
    If your using Windows box and not using node manager to start the managed server,add the below line startManagedWebLogic.cmd file
    set JAVA_OPTIONS=-Dweblogic.StdoutDebugEnabled=true %JAVA_OPTIONS%
    echo JAVA_OPTIONS=%JAVA_OPTIONS%
    If you are starting the Managed server through the node manager then use these flags From Admin console : servers >>>. MS1 >>>> server start >>>> Arguments :-Dweblogic.StdoutDebugEnabled=true
    Regards,
    Fabian

  • How to install license for Weblogic Server 6.1

    Hi,
    I downloaded WebLogic Server 6.1, it works fine.
    but I want to change the JDBC to Oracle (the default is Cloudscape). I follow the
    instructions in page "Installing WebLogic jDriver for Oracle". it looks fine until
    "java utils.dbping ORACLE james 1234 DBServer"
    it says: Missing license file for: Weblogic Server 6.1.
    I found the licese.bea is in c:\bea, I use "updatelicense.cmd" to do it several times,
    it still doesn't work.
    I am using Win2k and Oracle 8.1.7
    Thanks.
    James

    Hi.
    http://edocs.bea.com/wls/docs61/jcom.html
    or do you have a more specific issue?
    Regards,
    Michael
    Raymond Cheng wrote:
    Anybody know how to prepare JCOM environment for developer to intetrate their windows client.
    Thanks a lot.
    Raymond Cheng.--
    Michael Young
    Developer Relations Engineer
    BEA Support

  • Can anyone tell me Why?Missing license file for: WebLogic Server 6.1

    Thank you for take a look and give me solution!
    Missing license file for: WebLogic Server 6.1
    Error encountered:
    java.sql.SQLException: Fail to load jDriver/Oracle due to license checking failed!

    make sure the folder in which the license file exists, is in the classpath
    sree
    "Robert" <[email protected]> wrote in message
    news:3b57da5e$[email protected]..
    >
    "Roberto" <[email protected]> wrote:
    Thank you for take a look and give me solution!
    Missing license file for: WebLogic Server 6.1
    Error encountered:
    java.sql.SQLException: Fail to load jDriver/Oracle due to license
    checking
    failed!

Maybe you are looking for

  • How do I generate a PDF output report when the layout template is an Excel file in BI publisher 11.1.1.7

    This is what I did .. 1. Create new report 2. Create a report using an existing Data Model (browsed and picked a data model) 3. How do you want to create your report? (clicked on Used Report Editor) 4. Clicked Finished (then saved the report) 5. Then

  • IFD Import into LiveCycle Error

    I am able to open an .ifd file in Output Designer 5.5 but I receive an error when trying to import it into LiveCycle Designer. I receive the following message, "XML parsing error: no element found (error code 3), line 1, column 1, of file ..." Anyone

  • Problem Saving AdobeForm: INTERACTIVE FORMS DEVELOPMENT BASED ON ADOBE

    Gurus, I am basically developing "INTERACTIVE FORMS DEVELOPMENT BASED ON ADOBE SOFTWARE". The problem comes when I save the Adobe Form. I am loosing the value (Meaning not able to save the form). As far as i understand, this is surely pertaining to t

  • Will a Serial Number for Photoshop CS5 Work for CS5 Extended?

    Hello, I've recently subscribed to Photoshop CS5 and Dreamweaver CS5.5. In my Order History, it says 'Photoshop CS5', not 'Photoshop CS5 Extended'. However the download links in my Order History does not work (yes, I do have Adobe Download Assistant-

  • Change single app to all apps

    I pay month to month for a single app, how do I switch to all apps on a month to month basis. I am not ready to commit to a full year but I would like to use some of the other apps.  I want to pay on a month to month basis for now and if all goes wel