IFD Import into LiveCycle Error

I am able to open an .ifd file in Output Designer 5.5 but I receive an error when trying to import it into LiveCycle Designer. I receive the following message, "XML parsing error: no element found (error code 3), line 1, column 1, of file ..." Anyone have a clue about what the problem might be?

XML is a file type not /usually/ imported, but you should be
able to
create a text member and set it's filename to the XML file.
Try
something like (executed from your message window):
tMember = _movie.newMember(#text)
tMember.name = "XML document"
tMember.filename = "pathToXML"
tMember.linked = 0

Similar Messages

Two Errors during Unicode import into Target System

I exported our non-unicode 64-bit test NW 7.0 BW database as unicode and now I have started the import into the new unicode database on the target system. I am using the Single Code Page System Conversion to Unicode NW 7.0 SP16 and higher documentation. We are at service pack 18 with NW 7. During the Import ABAP phase the sapinst stopped with an errors. I found the following the first error in the SAP000.log - O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20090326104509
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#18 $ SAP
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Nov 18 2008 23:19:12
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe -i SAP0000.cmd -dbcodepage 4103 -l SAP0000.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DDL) ERROR: no tablespace for TABART SLEXC
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DDL) ERROR: no tablespace for TABART SLEXC
(DB) INFO: disconnected from DB
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20090326104509
The second error appears in the SAPSLEXC.LOG - O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20090326104509
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#18 $ SAP
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Nov 18 2008 23:19:12
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSLEXC.cmd -dbcodepage 4103 -l SAPSLEXC.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname   = "BWP20090325020311                                                                                "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "STBWP64                                                         "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "STBWP64"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 2"
(GSI) INFO: machine = "4x AMD64 Level 15 (Mod 4 Step 8)"
(DDL) ERROR: no tablespace for TABART SLEXC
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DDL) ERROR: no tablespace for TABART SLEXC
(DB) INFO: disconnected from DB
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20090326104509
It looks like the same error but in two different logs. Has anyone seen this error before? Thanks.

I checked and the datafiles for all the tablespaces are set to autoextend up to 10gb and none have done this in the tablepaces that are close to being full. I did increase three tablespaces that were showing close to being full and that did not resolve the error. Would I need to restart the process from the beginning and adjust the dbsize.xml to make it work?

Importing large margined PDF documents into LiveCycle

I have a PDF document with very large margins (height approx A4 x1; width approx A4 x5). When I go to import this PDF into LiveCycle to start making an eForm, only part of the PDF is displayed in the Design View tab. The remainder of the document is available for viewing in the Preview PDF tab. Can you tell me how I can set the margins in the Design View tab so I can continue completing the form?
Here are some screenshots of what I mean...
Design View tab -
Preview PDF tab -
Can someone tell me how I can increase the viewable magins in the Design View so I can continue creating this eForm?
Thanks,
Andy

Please double click on Design View and check if this works.
Thanks,
Wasil

Bulk Import into contact list error.

Hi,
We are testing out the bulk import into contact list feature and we are getting an error that we can't resolve. We followed the directions from the documentation http://topliners.eloqua.com/docs/DOC-6918
Here's the sample request we are making:
URL: https://www02.secure.eloqua.com/api/bulk/2.0/contacts/imports
Request Header:
Authorization: [our token]
Content-Type: application/json
Request Body:
"name": "test",
"fields": {
    "emailAddress": "{{Contact.Field(C_EmailAddress)}}"
"syncActions": [
      "action": "add",
      "destination": "/contacts/lists/63"
"identifierFieldName": "emailAddress",
"isSyncTriggeredOnImport" : "true"
Response Body:
    "failures": [{
        "field": "destination",
        "stackTrace": [{
            "field": "syncActions"
        "value": "/contacts/lists/63",
        "constraint": "ML Statements must have a ContactList root (see http://topliners.eloqua.com/docs/DOC-4298 for details) (when action = add)."
Is there a step we are missing?
Thanks for the help.

Hi Benny,
In syncActions, instead of: "destination": "/contacts/lists/63", please try: "destination": "{{ContactList[63]}}".

Why won't my video won't import into iMovie. There is a red ERROR message underneath clip.

I just imported 40 out of 43 clips of HD video from my JVC HD Everio camera into iMovie '11. It's my first time using either equipment for editing. I selected import all but only 40 of the clips successfully imported. 3 of the clips were not able to be imported but I can still play the clips fine from the import window. The clips all have red error messages underneath them. This is an issue that I've seen posted other places online but it doesn't seem to be resolved. It's very frustrating for me, I've been researching online to try to fix this for hours now. The closest I have come to a solution involved deleting extra 3rd party plugins from my quicktime folder however I don't have a folder named "Quicktime" in my Library. So I don't know what to do. Please help!

The error message appears under video clips already imported into iMovie. Like in this screenshot http://km.support.apple.com/resources/sites/APPLE/content/live/VIDEOS/0/VI57/en_ US/imovie-start-poster.jpg on my mac out of the 6 clips shown per row, only 5 of them have the word "imported" underneath them in white letters and then one of the clips has the word "error" underneath it.
I don't think it's a corrupted file because yeah I can play the three clips just fine. The page that I read that had that fix in it (deleted plugins) was here: https://discussions.apple.com/thread/1893021?start=0&tstart=0 The correct answer is near the bottom of the page and was posted by iphonejunky. Maybe the fix would be that simple but like I said, I can't find a folder named quicktime in my library. I don't know if I'm just stupid or what.
I don't think I have Flip4Mac installed because I never consciously installed it. I use VLC for playing most video. The clips imported are all .mov

Application ID reserved error upon import into workspace

I have two workspaces, development and production, in one APEX (3.0.1) environment on 11.1.0.6.
I have two applications, one 1 page long and one 33 pages long. The 1 page application is an anonymous login with a jump button to the login page of the 33 page application.
I normally export from development and import into production to make an upgrade of the applications. I can do this successfully with the longer application, upon import I ask to replace the target workspace application ID. When I try this with the 1 page application, I get an error about the application ID being reserved.
The application IDs are normal numbers.
33 pages - development workspace/appl id 107 ==> production workspace/appl id 111 - Works
1 page - development workspace/appl id 119 ==> production workspace/appl id 121 - Fails
Luckily the problem is on the 1 page application. I just redo the edits from development in production.
Any suggestions how to resolve the error so I don't have to re-edit? I'm fearful that it may start happening on the bigger application. That will not be an easy one to re-edit each time I have a release.
Thanks,
Ed

I solved this but I don't know how I caused it.
In the export repository in the target workspace, the Application Exists column had a check. I deleted the row from the repository, and I was able to import into the workspace and change the application number to the one which matched the Application Exists number.
How I got that check mark to show up is a different story. I can't remember doing anything to cause that. Maybe it was the initial import of the application to that then unused number? At least I know how to fix it now.

Email not being imported into my MacBook Pro - SSL error

My email accounts that I monitor thru the mail in my macbook pro are now not working or updating. When I read the error message it states that I might have to turn SSL off if my server does not support it. I read Eric Roots suggestion on how to turn off SSL but when I follow his instructions I can not edit the SSL selection to uncheck. My mail has been working fine by importing 5 email accounts into my Mail Application but since May 9 it has quite working on my Macbook Pro. The mail app works fine on my ipad and my iphone.

Out of frustration I finally completely shut down my MacBook Pro and waited 30 minutes then turned back on and majectly all of my email accounts imported into my Mail account. Still not sure why this happened. I use my MacBook as my desktop so I leave it on all the time and wonder if this may be my problem. Thanks looking at my question but no answer replies but this seemed to fix my issue.

Error importing *.SCA file into NWDS: Import (into source SC) not possible

All,
When attempting to import an SCA into a new project in NWDS, an "Import (into source SC) not possible: SCA doesn't contain DC sources" occurs. Any assistance to fix this issue appreciated.
Thanks,
Lee

You can indeed import SCAs into local development configurations in NWDS (Eclipse). You have to have a pre-existing software component of the same name and vendor which may or may not be empty.
In the Development Infrastructure perspective in NWDS 7.1, just right-click on the software component you want to overwrite with the import and choose "Import".
To import SCAs into a CMS track in the NWDI, you have to go to http://<NWDI server>:5<nn instance no>00/devinf/ and import the SCAs from the transport inbox directory of the NWDI server. Don't forget to maintain the SLD if necessary.
Cheers,
Thorsten

After upgrading to MAC OS X 10.10.2 Lightroom 5 has an error that it cannot read the card when trying to import photos. The card is fine as I can import into iPhoto so any ideas?

After upgrading to MAC OS X 10.10.2 Lightroom 5 cannot read the card (RAW files , converting to DNG) when importing. The card is fine as I can import into iPhoto - any ideas?

It’s usually necessary to trash the prefs after updating OSX to Yosemite. Start by quitting Lightroom 5.
Launch Finder and click the Go menu whilst holding down the Option (alt) key. Then go to:
Library >> Preferences
clear everything relating to LR5 which usually means deleting the following files:
com.adobe.Lightroom5.plist
com.adobe.Lightroom5LSSharedFileList.plist
Then re-launch Lightroom.

I cannot import music into my iTunes or import cps, getting error (-50). HELP!! been dealing with this for 2 days

I am going crazy. Got a new 2tb time capsule and have moved all my music to it and thought I was finally successful (though I have somehow lost some songs and recovered some...though some still cut off right at the end??) but now my biggest issue is itunes will not allow me to import any music, cd or downloaded files. I get the message when importing a cd "error occured while importing the file "song name" An unknown error occured (-50). I get the same error when trying to add downloaded music files also. I am really getting frustrated, itunes did not use to be so difficult to maintain. If we figure this out maybe someone can also help figure out why some songs are cutting off. I have researched this for a couple of days and unfortunatley am not finding much help. Thanks!!

1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
Your Library has been damaged from being run on an overfull disk.
How much free space on it now?

Having trouble creating a PDF to import into Acrobat from Livecycle.

My Livecycle document saved as a pdf can't be read by Acrobat. I need to add text to a pdf that can't be read by Acrobat, but can be read by Livecycle. I would like to import to Livecycle and save as a pdf that can be read and modified by Acrobat. Any suggestions will be appreciated.
Thanks

Once you have the WORD file in a PDF as you have done, try the Forms>Start Form Wizard (assuming you have this on the MAC). As I understand it, you can not create a PDF from DOC within Acrobat on the MAC since it requires PDF Maker that is not part of the MAC Acrobat system. Some MAC users should be by eventually to clarify or correct my comments.

Import into Consolidation system failed

Hello,
We are on NW04s and tryign to import ESS component and other standard components like SAP_JEE,SAP_BUILDT into the Consolidation system and import fails in between with the CBS Log as:
Build number assigned: 7851
Change request state from QUEUED to PROCESSING
INTERNAL BUILD request in Build Space "D77_ESS11ADC_C" at Node ID: 778,177,350
     [id: 7,845; parentID: 7,539; type: 32]
REQUEST PROCESSING started at 2007-12-14 23:25:37.149 GMT
===== Pre-Processing =====
Calculate all combinations of components and variants to be built...
     "sap.com/ess/jp/fam" variant "default"
Prepare build environment in the file system... started at 2007-12-14 23:25:37.227 GMT
     Synchronize development configuration... finished at 2007-12-14 23:25:37.227 GMT and took 0 ms
Development line state verification started at 2007-12-14 23:25:41.336 GMT
Verification of the development line [ws/ESS11ADC/sap.com_SAP_ESS/cons/active/] SUCCEEDED
Development line state verification finished at 2007-12-14 23:25:41.352 GMT and took 16 ms
Cache verification, level 2 (Comparison of attributes) started at 2007-12-14 23:25:41.352 GMT
Verification of the following object:
     [DC: sap.com/ess/jp/fam, group: 0] SUCCEEDED
Cache verification finished at 2007-12-14 23:25:41.368 GMT and took 16 ms
     Synchronize component definitions... finished at 2007-12-14 23:25:41.446 GMT and took 4 s 219 ms
     Synchronize sources...
===== Pre-Processing ===== finished at 2007-12-14 23:25:50.227 GMT and took 13 s 78 ms
Change request state from PROCESSING to FAILED
ERROR! The following error occurred during request processing:java.lang.OutOfMemoryError
Unknown reason (java.lang.OutOfMemoryError)
REQUEST PROCESSING finished at 2007-12-14 23:25:50.243 GMT and took 13 s 94 ms
What can be dome to fix the OutOfMemory Error...?
Any help would be highly appreciated..

Hi Shikhil,
Please do the follwoing
1. Incrrease the memory size by navigating to Check the CBS settings in the Visual Administrator->Services->Component Build Service-> Tab 'Properties'
2.Refer to this thread
CMS Error importing into Consolidation System
3.SAP NOTE 723909
Thanks
Pankaj

Exporting and Importing Destination Controls Error

When I export table within destination control and import the table to another Ironport again within destination control I receive error - "Wrong format of the destination config file: ip_sort_pref is required for the global settings."
We are updating the ASYNC on each of our de clustered Ironport. So when one is not in use we need the other to handle all the traffic, including domain controls.
The output displays
[ABCDE.com]
max_host_concurrency = 500
limit_apply = system
limit_type = host
max_messages_per_connection = 50 ......
How can I import this without losing or altering the data within.
^^^^^^^^^^^^^^^^^^^^^^
Solution
We upgrade one of our SMTP ASYNC to 8.0.1 which creates a additional line within default of the upgraded Ironport exported control destination table that is named... wait for it.... ip_sort_pref. Just add it.

The applications and drivers have been imported into the Dev SCCM server however I cannot find the actual content so I am not sure this has worked properly.
When you exported did you choose to "Export all content for selected task sequence and dependencies".
80070003 = The system cannot find the path specified.
See here for exporting and importing task sequences
http://blogs.technet.com/b/inside_osd/archive/2012/01/19/configuration-manager-2012-task-sequence-export-and-import.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

I have MTS files imported from a Canon HD cam. They import into I movie and I see them in the Finder folders and they preview fine. I have a new project and some of the clips are freezing and some audio is now gone? Do i need a file converter and convert

I have MTS video files that import from a Canon Vixia HF S20 HD camera. I imported into I Movie. They converted into MOV files and I see them in the movies folder in finder. They view fine and run through the events folder in Finder. In I Movie, I created a new project and used a "Theme". The project worked fine at first but then some clips started to freeze and some lost audio. The effected clips are the same in the project library and in the event library, meaning they are froze in both places. As I said when i view through finder the MOV files preview and work fine. Is this inherent to MTS files using in I movie. SHould i consider using a file converter to convert to MOV files prior to importing into I movie.
I found on Apple support site info that states the MTS files can only be imported through the camera. I am developing my back up procedures and now I am faced with backing up in the original MTS files but not being able to reload if necessary into I movie. Any suggestions?

I'd like to add that after I import these clips without thumbnails, iMovie does give me an error and say that they could not be imported. No explanation as to why, though. Again, they play fine on my camera.

1) How do I restore a spreadsheet that says "Spreadsheet couldn't be imported. An error occurred." & 2) How do I prevent this from happening?

Several times on my iPad, I have been getting the following message when trying to open a Numbers spreadsheet that I've been working on:
"Spreadsheet couldn't be imported. An error occurred."
The icon had already turned into a generic Numbers icon at that point in time, and the iPad doesn't allow me to email this file. I would then try to recover it on my iPhone, but Numbers/iCloud had already automatically deleted it. I've tried resetting my iPhone & iPad and restoring the previous day's data, but my hard-earned work was still gone!
This was a fairly large spreadsheet that I would make changes to multiple times throughout the day with either my iPhone 5 or 3rd Gen iPad. They are both updated with iOS 6.1.2 and Numbers 1.7.2, and both have iCloud turned on for syncing Numbers documents. I travel and work throughout the city on a daily basis, so I get a mixture of connection speed from LTE, 4g, wifi, to none.
I've made it a habit to make additional copies of my spreadsheets each week, and now I'm resorting to making additional copies at the end of each day. Sooner or later if this keeps happening, I may have to make annoying copies of the file every time I make a minor edit. This isn't how iCloud or anything from Apple is suppose to work. Please help out with this problem.
Thank you in advance.
Yffub

Thanks den.thed,
Apologies for not replying back sooner - I've been away.
Although your suggestion helped me in getting a copy of Lion that I could use, it didn't help with the restore from Time Capsule issue. I had to download the Lion app onto my MacBook & then transfer it across but it wouldn't let me upgrade my OS for some reason, so I ended up wiping the iMac completely and restoring via my Snow Leopard install disk. For some reason, this time, it let me have the option of using Setup Assistant to access the Time Capsule for a complete restore.
Now, over a week later, with various bits of tweaking and reinstalling some apps that didn't seem to come across, I have my system back.
Thanks for the help anyway.
Cheers,
Paul

IFD Import into LiveCycle Error

Similar Messages

Maybe you are looking for