802.1x phone with two MAC address

Hello,
I have following scenario: Computers are connected behind phones, and phones are authenticating with MAB. The problem is with phones, because they have two mac addresses one is in voice vlan and another is in data vlan. Both phone and computer are authenticated successfully but when switch sees additional MAC address of phone in data vlan it shuts down port. Here is sample configuration:
interface FastEthernet0/1
switchport mode access
switchport access vlan 10
switchport voice vlan 15
authentication host-mode multi-domain
authentication port-control auto
dot1x pae authenticator
authentication violation shutdown
mab
spanning-tree portfast

Can you verify if the phone's mac address is being learned on the data vlan and the voice vlan? Because cisco phones use cdp to discover if a voice vlan is configured on the switchport before forwarding traffic.
Please issue a show mac address table interface x/y after bouncing the port to see what is causing the port to error disable.
Also what version of code is running on the switch and phone?
Thanks

Similar Messages

  • Can I sync my phone with two Macs?

    Howdy,
    I have a Mac at home and a Mac at work, both of which I keep sync'd with .Mac. I have a bluetooth adaptor on the Mac at home which I use to sync with my Sony Ericsson T637. If I put a bluetooth adaptor on the Mac at work, can I sync my phone with either Mac interchangeably? That is, if I sync my phone with my home Mac, then come to work and sync it with my work Mac, will iSync do the right thing? Will it realize that all the data is the same and not try to duplicate everything, even though it's syncing with a different computer?
    Mikael
    TiBook   Mac OS X (10.4.3)  
    TiBook    

    It's not a good idea, because the complexity of such synchronization events. While ideally you should be able to attach your other devices to any workstation and synchronize at any time - if each workstation is, in fact, kept up-to-date through .Mac - in reality, such data exchanges are not reliable.
    You are best advised to avoid any action which complicates an already relatively complex, limited and - at times - unstable and unreliable - technology. The best approach is to pick one workstation as a sort of 'synchronization server' to which all other devices are attached, either through USB, Bluetooth or, in the case of .Mac, wireless or terrestrial ethernet.

  • Device in Linksys Smart Wi-Fi is listed with two MAC address - not correct.

    I am using a EA4500 and use Linksys Smart Wi-Fi to manage the device. In the household we have multiple Apple i devices. Somehow the Linksys Smart Wi-Fi combined two separte i devices (iPhone 5 and a 4th generation iTouch) to one user.
    The devices actually have different names, but the Smart Wi-Fi is combining them into one device. So I can't use Parental Controls on one of the devices.
    I hope you can help me on this. We have made sure both devices have different names.
    192.168.1.106
    F01:A9:95:67:17
    192.168.1.122
    88:C6:63:B0:5F:88
    Solved!
    Go to Solution.

    Before you decide to used the classic firmware, I would suggest that to try to manually add your TV under the DHCP reservation of the router's UI.

  • I have two .mac addresses; how does this work in iCloud?

    This is not about consolidating Apple ID's... I think.
    When I got my first .mac address, I thought I picked a good one at the time. Later on, due to the peculiar spelling, I opted for an additonal (paid) address which I use every day. Now the first one (which is an Apple ID) contains my calendars, contacts, etc. I never use the email portion of it, again because of challenging spelling. The second .mac address (also an Apple ID) is an email only account. This is the email account I use daily.
    When I make the transition to iCloud, I intend to keep my original AppleID (from the pre-.mac days) as my iTunes store ID.
    My question is, what happens with my two other accounts?
    .mac #1 with the contacts and such would move to iCloud and sync everything there as it currently does with MobileMe. Since .mac #2 is an email only account, would I even need to bother moving it to iCloud (if that's even possible), or would I just keep using that as email only using the current mail settings on my iThingys and Mac? Does anyone know if .mac #2 will live on after MobileMe vanishes, or will I loose my daily and coveted .mac email at that time?
    I'm sure Apple has a good reason for not allowing us to just consolidate everything in one place, but I know there are many out there with a similar situation to mine.
    I've spent a good deal of time tonight searching the various threads and can't seem to find an answer to the two .mac email dilemma. My appologies if it's already been discussed.
    To sum up, I have one Apple ID that I use for iTunes and intend to keep as such. I have two .mac addresses which are also Apple ID's; one that syncs with MobileMe and one that is email only. I would like to use iCloud to sync what is currently on MobileMe, AND continue to use the simpler email address that I've been using for years.
    Am I screwed??
    Thanks in advance for your help, and Happy Holidays to all!!

    Migrate the account which contains your calendars, contacts etc. first, at http://me.com/move and set it up on your Mac and devices.
    http://www.apple.com/icloud/setup/mac.html
    Now migrate the email-only account in the same way. On a Mac you can add it in System Preferences>Mail, Contacts & Calendars - it won't sync anything but will be added to the accounts in Mail where you can then use the email in the normal way.
    I don't know what the equivalent process on an iOS device is; very likely you need to add it as an account in the Mail app.

  • I have updated my iPhone 3s to the latest software. I had backed up my phone before I did this. Now I have lost my music and apps. I can't sync the phone with my Mac, I can't re-download as the phone says I don't have any music or apps available. Help!

    I have updated my iPhone 3Gs to the latest software in an attempt to iron out a problem with a new telephone network provider (Tmobile). I had backed up my phone before I did this. Now I have lost my music and apps. I can't sync the phone with my Mac, I can't re-download from iTunes as the phone says I don't have any music or apps available to re-download although it all shows up on my Mac. The music and app content cannot be restored when I try to restore the phone from the back up I madeon my Mac. Help!

    Working on that now.  I'm just getting frustrated that everytime I run updates for the phone I end up with tech problems that I have to spend time solving as opposed to updates that actually improve my usage.  Now I will once again get to spend hours reloading my phone all for updates that didn't affect my usage in the first place.

  • I synced my phone with my mac and agreed to delete pictures on my phone, is there a way i can get them back on my phone?

    I synced my phone with my mac and agreed to delete pictures on my phone, is there a way i can get them back on my phone?

    Only if you have a backup of them.

  • When I synced my phone with my mac, the music that I had in my phone got transferred to my mac. 140 songs to be exact, however I can no longer see the songs on my phone, only the purchased album I have appears. How can I get the songs I had back?

    When I synced my phone with my mac, the music that I had in my phone got transferred to my mac. 140 songs to be exact, however I can no longer see the songs on my phone, only the purchased album I have appears. How can I get the songs I had back?

    Connect your phone to computer, and sync like this. Check the boxes for the playlists, artists, albums you want to sync. Then click Apply. If you have enough space on your phone, you can choose Entire music library.

  • WPA with local MAC address authentication

    Can Cisco Aironet AP support WPA encryptions with local MAC address authentications as the current setup i have do not have a radius server to authenticate my users.
    i tried configuring with local MAC address but no success.

    Try this:
    conf t
    access-list 700 deny xxxx.xxxx.xxxx 0000.0000.0000
    access-list 700 deny xxxx.xxxx.xxxx 0000.0000.0000
    access-list 700 permit 0000.0000.0000 ffff.ffff.ffff
    dot11 association mac-list 700
    Replace the xxxx.xxxx.xxxx with each host you want to allow on the AP. This will block any other MACs from accessing the AP. This is not by SSID, this is by AP, so let me know if this will work for you.

  • Computer names persistently associated with a MAC address causing problems

    Our WDS server will assign out a computer name like CompanyName###  This is great.
    The problem is sometimes WDS will assign a computer name that is getting associated with the MAC address somehow--I assume this is what's happening--and kick a computer off the domain that now has that computer name. 
    Is there some way I can disable the association of computer names with MAC addresses, or persistent computer names?

    Hi,
    How did you define your naming policy in WDS or in your answer file?
    3.1.1.4 Machine Naming Policy
    http://msdn.microsoft.com/en-us/library/dd871418.aspx
    Please also check this hotfix:
    Windows Deployment Services generates duplicate client computer names when the %MAC variable is used
    http://support.microsoft.com/kb/957051
    Hope this helps.

  • My new iphone 5 is downloading 800 songs - how can i stop this as its not required as i can simply sync my phone with my mac., my new iphone 5 is downloading 800 songs - how can i stop this as its not required as i can simply sync my phone with my mac.

    my new iphone 5 is downloading 800 songs - how can i stop this as its not required as i can simply sync my phone with my mac., my new iphone 5 is downloading 800 songs - how can i stop this as its not required as i can simply sync my phone with my mac.

    thats not what i mean - the songs are all in my itunes library on the computer but if i click the itunes icon on the phone they are also trying to download here - all i need to know is how do i stop this as when i go anywhere without broadband its eating my data allowance!!!!

  • Synching desktop Address Book with my .Mac Address Book. Is it possible?

    Can i sync my desktop address book with my .Mac address book?
    Thanks.

    I am also having this problem with my address book synching to .Mac. But my calendar and bookmarks have appeared with no problem so I'm not doing anything wrong -and I haven't created custom profiles either. Do you really think this is due to the lead up to Mobile Me? If so, why did the bookmarks etc sync with no problem? It is frustrating because this is what I really need to access.

  • How can I sync my iPhone5 contacts with my Mac Address Book

    How can I sync my iPhone 5 contacts with my Mac Address Book?

    Are you have Lion or Mountain Lion on your Mac?

  • ISE 1.2 disable endpoints with certain mac address

    Hi All,
    We have an AD to authenticate for wireless users. In AD, we have specified to block the user if the password is entered wrongly for more than 3 times. The problem is some of them are using other user ID and locking the accounts. I have gotten the MAC address of the user. Can anyone please advise how to block the request from this MAC from even reaching the AD.
    Thanks

    You have two options from ISE and one option from the WLC:
    The first option which is not very scalable is to modify your authentication policy to deny access to an specific MAC address(Radius:Calling station ID). But this is not very scalable as you can only specify one MAC address.
    Your second option is to enable the anomalous client suppression(under systems->settings->protocols->RADIUS). This will be your best option but it would require a bit of testing to identify what are the best values for your environment.
    From the controller you can enable the excessive 802.1x authentication failures. By default it won't even send the fourth authentication to ISE for a failing endpoint:

  • Sync a phone with 2 Macs (having the same name)

    Hi,
    The question is on the title:
    is there a problem to use 2 Macs HAVING THE SAME NAME (I.E. my name) with a single phone ?
    I hope a clearly asked my question (my frenchy english is sometimes clumsy).
    Where can I find a omplete documentation of iSync.
    Thank you all

    Welcome to Apple Discussions.
    The short answer is yes, this approach is problematic and can result in severe data corruption on not only your mobile handset, but on both computers. The name of each computer is immaterial: iSync is not intended to support the use of a device as a 'data storage' go-between to equalize the contents of contact, calendaring and tasks records on two or more Macintosh desktop or portable computers.
    Instead, you should synchronize multiple Macintosh computers using:
    • .Mac Sync with a .Mac account
    • MySync from MildMannered Industries (technology acquired by Mark/Space)
    • the not-yet released SyncTogether from Mark/Space
    More information about these options is available here:
    http://www.mildmanneredindustries.com/mysync
    http://www.markspace.com/synctogether.php

  • Using POP Mail With Two Macs?

    Is it possible to use two Macs with Apple Mail? I use Mail on my iMac, and I would like to set it up on my PowerBook as well. The only problem is accessing the same mail on both computers. It seems like if I were to open a message, it would store it on the respective computer that I open it with, and I would not be able to access it with the other. Is it possible to set it up where I can see the same messages on both? I use GMail. Thanks.

    Like Kappy said, it's a hassle if you are using pop mail. But no problem with imap because the "master" copy is always maintained on the imap server, and your two computers are, essentially, nothing more than mirror sites.
    I don't know if GMail is pop or imap.
    What you would have to do for a pop account is set up account prefs to leave message on server after downloading on at least one of the computers, if not both of them. If you do that with both, I expect you will be hearing from your pop provider real soon about excessive disk space use. If you only do it to one computer, make sure that it is the one you will always be downloading mail from first. Plus, I can't remember whether that would cause multiple copies to download or not, on subsequent mail checks, when mail is left on server; it has been so long since I have had to play that game with pop servers.
    Again, imap is no problem, because imap was designed to address this very problem.

Maybe you are looking for

  • Can I install a second copy of FCPX to my laptop?

    I feel like I read something on this but now cannot find it; Is it possible to purchase FCPX and somehow install it to not only my MacPro, but also on my MBP - as we used to be able to do in the past (provided the two were not in use at the same mome

  • OS/X Lion 10.7.2 kernel panic - freezes & crashes continue

    Just using Safari (with a remote session in the background), I had a full kernel panic & crash - the one where it tells you that you have to reset the power. I've a 24" iMac ( early 2009 ) NVIDIA GeForce GT 130 512 MB Lion 10.7.2. So it's not just yo

  • To who already they sent back the macbook?

    To who already they sent back the macbook?

  • Change color scheme on apps

    When I updated to iOS7 all of my most used apps changed the "paper" to bright white.... how do I change it back to what it was before. Thanks Riposte

  • Start multiple services on a list of computers

    I'm trying to write a PowerShell script to start multiple services for a computer list in a txt file.  I know there has to be a way, but I'm running in circles trying to figure it out.  My latest test is Get-ContentD:\Scripts\test.txt|Foreach-Object{