8051 based spectral analyser

Greetings,
I am working on a project that consists in creating a spectral analyser for the power line using the 8051 and the ADC0808 for analog to digital conversion. In the LabVIEW I am trying to sample the waveform of the power line and use the FFT algorithm to perform the spectral analysis with 0Hz to 2.5kHz of range.
Do you think that is possible to use this uC with no problems to perform this application with the Instrument I/O Assistant? Here is the screenshot that what I am trying to do.
Observation: The frequency of the desired signal that I am trying to sample is equal to 60Hz and the ADC0808 has a conversion time equal to 100us.
Thanks,
FBorges22
Attachments:
Spectra.PNG ‏32 KB

Borges -
The I/O Assistant is used to help you establish communication with serial, GPIB, Ethernet devices. It does not, however, process signals in any way. You should be able to establish communication without any problems using the I/O Assistant.
To perform an FFT analysis of your signal, you will need to use one of the many signal processing VIs in LabVIEW. There are express VIs that do Spectral Measurements as well.
I hope this helps
Bruno Noronha
Bruno Noronha
Certified LabVIEW Associate Developer
Using LabVIEW 8.6

Similar Messages

Spectral Analysis using Lightroom

A bit of an odd question, but I would appreciate any help.
Is it possible to use Lightroom as a spectral analysis program for standardized images?
For example:
I have numerous standardized images of geological samples. Some are lighter, some darker depending on the makeup of the sample. Can I export the spectral histogram from Lightroom as a data point for the composition of each sample? Is there any way to access the histogram/spectral data in a way that allows it to be quantified and placed into a database?
Thanks for the help!
-Marshall

The histogram is based on Melissa RGB which is ProPhoto RGB primaries with a gamma (TRC) of 1.0 which isn’t easily exported so I doubt this is going to be useful to you. The histogram (here or in Photoshop etc) are not based on spectral data anyway. This is probably more useful for you:
http://store.rmimaging.com/spectrashop4.aspx

Spectral analysis of an acquired signal

Hello there,
I am trying to acquire a signal for spectral analysis. I have set the analog input VI to 1Chan/NSamp/Dbl format, and fed the data to the express spectral analyzer VI. The VI is set to acquire arrays of 100 samples length, before feeding it to the FFT VI. The problem is, however, that the waveform graph I use to present the spectral distribution shows spectral analysis for a bandwidth of 0.5 Hz only (0 to 0.5 Hz), and I have no clue why this happens. I am sure there is something I do not know about how to set the application to go right.
P.S. I have also tried the low level FFT VI, the wavegorm graph shows a bandwidth corresponding to the number of samples being acquired at each iteration, (100 in my case), which really confuses me. I have looked at the examples, and none of them uses DAQ for FFT, they all use signal generators which work fine with me.
Does anyone have an idea of what I am doing wrong, any help shall be greatly appreciated...
Thankyou for your patience,,,
Bedair

Hello there,
Attached is a sample code of my problem, please note that I use LabVIEW 8.0
Thank you for your help,,,
Bedair
Attachments:
sample_code_fft_noise1.vi ‏86 KB

Account Based Profitability Analysis

Hi,
I am mapping characteristic fields of account based profitability analysis. I have been given fields such as KMLAND to map into BI fields.My question is how do i map the key figures. What fields in account based profitability analysis are key figures, are they value fields? Do i need a list field names of value fields to map it into BI.Some one mentioned something about cost elements.
Thanks
TJ

Hello Tee Jay,
Cost Element is a key field in ECC. That means its char. in BW. What are the infoobjects that you have in your DSO or cube n BI.
Do you have 0COSTELMNT or 0GL_ACCOUNT? If so, then you map Cost element field from SAP to one of the above char. in BW.
By Revenue, do you mean a value field in R/3? If so, it will have to be mapped to key figure in BI.
Hope that helps.

Remove blue line in spectral analysis; paintbrush not selectable

I'm trying to remove a persons talking from a sound file. His talking shows up in spectral analysis as the color blue. Is there some way to select and mute it? The paintbrush is not selectable, tried to do this manually. Audition clearly identifies the speaking, so if it could be removed, that'd be great.
Thanks

Sounds like you may have "Spectral Pitch Display" on, which draws a blue line for pitch correction and analysis, but does not expose the selection tools as you've seen. Just turn on standard "Spectral Frequency" view and the paintbrush and other spectral selection tools will be enabled. (You can click the left-most Spectral button in the tool bar, or just use the SHIFT+D default shortcut)

Does "Access Enforcer" only support "role" based SOD analyse?

Hi Expert,
In the demo script, when the user create the "Access Request Form", he can choose the "Role" he wanted from "Select roles" list, I'm just wondering whether each role here is corresponding to the role in the backend system? for example,
If I choose role "Z_AP_ACCOUNTANT" actualy at that time there is a role called "Z_AP_ACCOUNTANT" already in the backend system if the system is a SAP ECC system.
Another question is, if so, does that mean it can only support "Role" based SOD analyse? as you know, each role may contain several "authorization objects", can it be done from "authorization object" level?
Thanks and best regards.

Hi,
The Roles are normally determined based on the SOD.Using T/code:PFCG the roles are mapped to the system.These Roles are common to all the system,regardless of R3,Virsa etc.
The roles also can be determined without SOD [but this is not recommended.].
The SOD is only to ensure that there exist no internal control weaknesses while creating the Roles at an organizational level.Thus it is only an excercise outside the System,be it SAP,Virsa or else.
At the system level we map only the roles [ using :PFCG].We dont map SOD here.So,SOD or No SOD,the system supports the Roles.
Hope this helps.
Regards,
Ramesh.

Could I do the spectral analysis of blood pressure data only use your software?

Dear,
I am doing an experiment about baroreflex (Blood pressure reflex) using a system of PowerLab (ADInstruments). I have many data that I want to do Spectral analysis and try to find specific software to do that. I found from literature that you may have a software (LabView?) could do spectral analysis of blood pressure. If so, could I do the spectral analysis only use your software?
Thank you,

Hello mlin,
LabVIEW can interface with your transducers using hardware. Once the acquisition is over, LabVIEW can get the data and convert the time information into the frequency domain so that you can see the amplitude of each of the frequencies involved with the signal. I am just curious about the equipment you will be using. You will need some data acquisition cards that have drivers for LabVIEW unless you are just getting the information from a desktop instrument. If you are using a desktop instrument, then LabVIEW could send the commands to automate the process. I hope this answers your question.
Steven T.

Audition's Spectral Analysis Bug

Hello there, 'ive been using audition for a short period of time and i've found it one of the best recording/editing softwares i have ever used. Anyway, there's something on the spectral analysis window that is bothering me. I don't if it's just some configuration that is messed up or if it is the fact that i'm new to it, but it appears nothing, just a white and stuffless window. I'm attaching a .jpg so you may undestand the issue.
How could i fix this issue?

If you wouldn't mind sending me a quick info file from Audition, I may know the cause of that problem. In Audition, if you click Help > About Adobe Audition and click the SYSTEM INFO button, it will write out a text file with some information about the installation. If you could send that as an attachment to [email protected], I'd appreciate it very much. I'll be better able to verify if what we believe to be the cause of the effects issue you describe is in fact relevant to your installation.
Thanks in advance,
Durin

Spectral analysis?

what are people using for spectral analysis in logic express. ive tried searching the internet and cant find any good options. obviously it needs to be au and since im running intel it also needs to be ub. oh yea and free would be pretty nice too. haha.

I was using Inspector. It's still free.
http://www.rogernicholsdigital.com/inspector.htm
Dual 2.5Ghz 2004; 2.5GB RAM Mac OS X (10.4.8)

Spectral analysis with 10 averages using 10 lvm files

Hi
I would like to create a spectal analysis of some results i have saved in lvm files in labview 7
is it possible to use the averaging option in the spectral measurement function to do 10 averages if i read 10 lvm files
ie.
Read lvm file #1
do spectrum analysis
read lvm file #2
redo spectrum analysis and average results between file #1 and file #2
read lvm file #3
ect
Thanks in advance
Mark Thompson

hi there
you can swop the order of calculating the average and the FFT. So first read all lvm files, average the time based data and then do the FFT over the averaged data.
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"

Role Based Risk Analysis Report

Hello All,
When I executed the Risk Analysis report for a role with SOD Risk Level = ALL and Report type = SOD at Authorization Object level, the results come back as "NO CONFLICT FOUND". this is the correct response.
However, I executed the Risk Analysis report for the same role with SOD Risk Level = HIGH and Report type = SOD at Authorization Object level, the results come back SOD conflicts based on the conflicting transactions. Is there a bug with analyzing roles using this option?
Also, when I click on the Detail Report button, I received object data that does not appear correct.
Please Help. Thanks.
Edited by: Michael Johnson on Apr 8, 2009 8:54 PM

Hi Babiji,
Are you using any specific tools for SOD's? If you are using GRC tool, then it can be done using compliance calibrator Role level Risk analysis.In addition to what Sneha has said,
To find out the conflicting roles in CC version 5.2 the path is INFORMER->Risk Analysis->Role level.In Virsa 4.0 you have the option of carrying out risk anaysis at role level by executing the t-code /N/VIRSA/ZVRAT.
In section Analysis type, choose Roles and enter the list of roles.
In section SOD Risk level, choose the appropriate risk.
Then choose the appropriate report type and report format before executing it.
This will display all the roles with the levels of risk associated with it and then you can mitigate these as per your organizational policies & procedures.
Thanks,
Saby..

How to get Query Results based on Analysis Authorization Ranges????

Hi Experts,
I have gone through the lot of SDN Links, however not able to find the answer to my question.
I have an Authorization Issue, NO Authorization
Error : EYE 007 ( Insufficient Authorizations )
Here is the issue:
Need to see the complete query result when I gave the range in Analysis Authorization for Controlling Area 001-005. Controlling Area is auth relevant and right now a variable is inserted in the query for it. If I select Controlling Area 001, the result for Controlling Area 001 is displayed in query. If 002 then also displayed. If I do not enter anything, then I get the Eye 007 error message.
I am not sure how do I display/authorize the entire result in the query for all the Controlling Areas, I have authorized user to see??
Its really urgent, please help..!
Here are the logs:
Authorization Check Log
Date and Execution Time (Local Server)
Execution Date: 06.09.2007
Execution Time: 14:48:41
Executed Query: 0CCA_C11/GBCCA_MP01_Q0002_AP
Executed by User ZBI_TEST_001
Executed with Analysis Authorizations of Another User ZBI_TEST_001
InfoProvider Check
Building the Buffer...
...Buffer Built
Are there authorizations for accessing InfoProvider 0CCA_C11 with activity 03?
Authorization exists for general access to InfoProvider 0CCA_C11 with activity 03
InfoProvider Check
Authorization exists for general access to InfoProvider 0CCA_C11 with activity 03
Relevant Characteristics for Detailed Authorization Check
(Characteristics with Full Authorization Are Not Listed!)
List of Effective Authorization-Relevant Characteristics for InfoProvider 0CCA_C11:
0CO_AREA
0TCAACTVT
Relevant Characteristics for Detailed Authorization Check
(Characteristics with Full Authorization Are Not Listed!)
List of Effective Authorization-Relevant Characteristics for InfoProvider :
List Is Empty:
There Are No Characteristics That Have to Be Checked in Detail
Authorization Check
Detail Check for InfoProvider 0CCA_C11
Preprocessing:
Selection Checked for Consistency, Preprocessed and Supplemented As Needed
Subselection (Technical SUBNR) 1
Check Node Definitions and Value Authorizations...
Node- and Value Authorizations Are OK
End of Preprocessing
Filling the Buffer...
...Buffer Filled
Main Check:
Subselection (Technical SUBNR) 1
Supplementation of Selection for Aggregated Characteristics
No Check for Aggregation Authorization Required
Following Set Is Checked Comparison with Following Authorized Set Result Remaining Set
Characteristic Contents
0CO_AREA
0TCAACTVT
SQL Format:
CO_AREA = '0003'
AND TCAACTVT = '03'
Characteristic Contents
0CO_AREA I BT 0001 0005
0TCAACTVT I EQ 03
I EQ 16
Authorized
Subselection (SUBNR) Is Authorized
Authorization Check Complete
Authorization Check
Detail Check for InfoProvider 0CCA_C11
Preprocessing:
Selection Checked for Consistency, Preprocessed and Supplemented As Needed
Subselection (Technical SUBNR) 1
Check Node Definitions and Value Authorizations...
Node- and Value Authorizations Are OK
End of Preprocessing
Filling the Buffer...
...Buffer Filled
Main Check:
Subselection (Technical SUBNR) 1
Supplementation of Selection for Aggregated Characteristics
No Check for Aggregation Authorization Required
Following Set Is Checked Comparison with Following Authorized Set Result Remaining Set
Characteristic Contents
0CO_AREA
0TCAACTVT
SQL Format:
TCAACTVT = '03'
Characteristic Contents
0CO_AREA I BT 0001 0005
0TCAACTVT I EQ 03
I EQ 16
Partially or Fully Authorized (Intersection) Characteristic Contents
0CO_AREA
0TCAACTVT
SQL Format:
( CO_AREA < '0001'
OR CO_AREA > '0005' )
AND TCAACTVT = '03'
Value selection partially authorized. Check of remainder at end
Following Set Is Checked Comparison with Following Authorized Set Result Remaining Set
Characteristic Contents
0CO_AREA
0TCAACTVT
SQL Format:
( CO_AREA < '0001'
OR CO_AREA > '0005' )
AND TCAACTVT = '03'
Characteristic Contents
0CO_AREA I BT 0001 0005
0TCAACTVT I EQ 03
I EQ 16
Not Authorized
All Authorizations Tested
Message EYE007: You do not have sufficient authorization
No Sufficient Authorization for This Subselection (SUBNR)
Following CHANMIDs Are Affected:
184 ( 0CO_AREA )
Authorization Check Complete

Hi,
 Have you defined the vaule for 0CO_AREA as BT 001-005 in you Authorization for 0CO_AREA.Also how have you defined your Authorization Variable on the query? Have you define as select options or interval? I thing you need to define it as interval or select options.
Hope it helps,
Cheers,
Balaji

Need info for COPA (Cost based profitability analysis)- Archiving objects

Hi All,
SAP have introduced new 2 Archiving objects COPAA_xxxx, and COPAB_xxxx instead of the old archiving object COPA1_xxxx.
Where xxxx = operating concern.
Can any one please give the document path how to archive the COPA data.
Means exactly i want the variant parameters for the 2 new archiving objects.
Please waiting for your reply...
Thanks,
Nagendra

Hi Chandra sekhar,
I need to Archive the data in R/3 system & ECC6.0 not in BW system.
I want the steps how to Archive the 2 objects COPAA_xxxx, COPAB_xxxx in ECC6.0 System.
Please if have any info please help me...
Thanks,
Nagendra

POC based Results Analysis for Service Order/ Contract

Issue resolved. Please close the message.
Hi Friends,
We have a process where we create a service order and plan costs on the order.
Later a contract will be created with billing plan. The contract is assigned to service order manually.
After actual costs are booked to the service order the same is settled to Contract.
When I run RA for Contract I dont see the Activity rate planned costs so the POC is not giving correct results.
The planned material costs are being updated though.
I have mapped the activity cost element to a line id and COS in RA configuration.
Please let me know if I am missing anything here.
Thanks in Advance,
Vamsi
Edited by: VSS on Oct 23, 2010 10:49 PM

Hi,
We need to implement the following OSS note:
OSS Note 1259154.
Also please check if 1159784
is relevant for your system.
Thanks,
Vamsi

Higher order spectral analysis

hi all
Has somebody implemented a labview version of bispectrum, cyclostationarity and other hosa tools?
Is NI planning to add a HOSA toolbox for Labview?
Thanks in advance
Alipio
"Qod natura non dat, Salmantica non praestat"

Hello Alipio,
I'm not aware of any toolkit that covers that area. The most similar toolkit NI provides is the Signal Processing Toolkit, and you can see its features here:
http://www.ni.com/pdf/products/us/4msw69-70.pdf
If this doesn't satisfy your needs, I would:
a) Search Alliance Members with signal processing knowledge. You can look here:
http://www.ni.com/alliance
b) Search other parties tools. These 2 links may help:
http://c.webring.com/hub?ring=labview
http://directory.google.com/Top/Computers/Programming/Languages/LabVIEW/
c) Use already coded external code (DLLs, etc..) that implement the algorithms.
Good luck !
JorgeM.

8051 based spectral analyser

Similar Messages

Maybe you are looking for