8330 Curve. Please help me set up to sync with Google Calendar.

Please help. I have a new Curve. I spent forever getting Google Calendar loaded up with my LIFE, and now I cannot seem to get the two to sync consistently. Would someone please simplify this for me (talk to me like I am 8) and rescue me from the panic I am in?
I need Google Calendar to sync (both ways) with my BB. Since I can only find a way to set two different sounding alarms on the BB, I also need to be able to have Google Calendar send e-mail alerts (because I can use a different alarm tone) and SMS (another tone) for some events.
I had some of this working, and all of a sudden, some events are out of "sync" by a day. (ie. it says they are set for a Thursday, recurrring ,but they show up on Wednesday on Google). Also, many events are not syncing from Google Cal to BB.
Following some of the information I read here, I re-set my Calendar Sync, re-loaded Google Sync. I now have 3 entries in my calendar, not 823. It would appear that most of what I need still exists in my desktop Google Calendar. Please help me get these appointments back on to my BB!!
Thank you.
b

First, you need a Google account. If you don't have one, get it here:
https://www.google.com/accounts/ManageAccount
Second, get Google sync here:
http://www.google.com/mobile/blackberry/sync.html
Third, read about it here:
http://www.google.com/support/mobile/bin/topic.py?topic=13585
Jerry

Similar Messages

*** PLEASE HELP *** My IPHONE won't sync with Itunes *** PLEASE HELP ***

My husband & I both have Iphones & we went to sync & his goes fine, but everytime I plug mine in, the rainbow beachball comes up & just turns & turns & won't go away, and never connects to itunes & when I unplug my phone it goes away... We have 2 separate accounts setup to do our syncing...
Also my phone does not let me dial out or people dial in... They go right to voice mail. I have tried rebooting & even the "hard reboot"
And one more thing... Is there any other way for me to save my contacts & calender??
If I have to restore, how do I do that??
Please help me.... Thank you!!

You are a LIFESAVER!!!!! It worked & my phone is syncing.... No one at the "apple" help desk has been able to help me all week. THANK YOU so much...
Can the phone not handle that many podcasts at once? I have a 16GB phone...

PLEASE HELP!! CAN'T SYNC WITH OUTLOOK...AND ITS NOT THE 64 BIT VERSION

PLEASE HELP ME!!
I have a BB Storm2 9550. I had a laptop with Outlook 2007/Windows Vista/BB Desktop 5 and it synced fine.
I now have a new laptop with Outlook 2010/Windows 7/ BB Desktop 6 and each time I try to configure the Organizer Data to select 'Outlook' for Calendar, Memo, Tasks, and Contacts and select NEXT I receive an error in Intellisync that says 'The Operation Terminated Unexpectedly'.
I have tried completely uninstalling BB Desktop manager from the Application Data folders and registry, reinstalling 6.0, downgrading to 5.0 (which gives me a Microsoft Connector Error).
I have also tried reinstalling Outlook. I read all of the posts concerning Outlook 2010 64bit but I am running the 34bit version.
Please help me. Right now I don't have any contacts on my BlackBerry and I am so frustrated. I have tried to fix this for over a week now and all the posts I read don't seem to resolve my issue or I don't understand them.
I'll even take suggestions for other ways to sync my data besides outlook (although that is not my preference)
Thank you
Solved!
Go to Solution.

Log in to an account that has administrator privileges.
Open a command prompt.
Type cd C:\Program Files\Research In Motion\BlackBerry Desktop\IntelliSync\Connectors\MS Outlook Connector.
Type regsvr32 MsOutlookConnector.fil and press Enter.
Note: For BlackBerry Desktop Manager 6.0, please use the following path:
C:\Program Files\Research In Motion\BlackBerry Desktop\IntelliSync\Connectors\MS Outlook Connector
Note: The following error message might be displayed when step 3 has been completed:
The module msoutlookconnector.fil was loaded, but the call to DLLRegisterServer failed with error code 0x80070005
If this happens, turn off the User Accounts Control (UAC) and register the MsOutlookConnector.fil file again.
To turn off the UAC in Windows Vista, complete the following steps:
Go to Start > Settings > Control Panel.
Under User Accounts and Family settings, click Add or remove user account.
Select one of the user accounts or the guest account.
Under the account, click Go to the main User Account.
Under Make changes to your user account, click the Change security settings link.
Under Turn on User Account Control (UAC) to make your computer more secure, clear Use User Account Control (UAC) to help protect your computer and turn off the UAC.
Click OK.
Restart the computer.
Give this a try it could be that the connector to ms outlook never registered properly.

Please help me set up a WDS with relay

I am attempting to create a WDS with 5 Airport Express units with the main station being connected to a wired router (will this slow things down?) I used the Airport Utility to designate the main station in WDS and then scanned for another station that I set up as remote. Everything works fines at this point.
Next I selected another station as a relay and then selected the main station and the other ones which I want to act as remotes from the relay (not sure if I should include the remote that I already have set up off the main station as also a remote to the relay) But regardless this is when I get the message that I should not have DHCP and NAT enabled and that I should deselect the "Distribute IP Addresses" option which didn't come up when I set up the first remote from the main. I tried leaving these options both on or off but either way the relay didn't connect to the main however the remotes connected the the relay. (I have double checked that I have the main station for the relay selected properly.
I was confused that you are to enter a network name and password for the relay because I thought it would it would automatically be changed to the main networks names and password. (Maybe it would have if I had it working right) Since it didn't I attempted entering in the main network name and password but it didn't help. A relay in WDS doesn't create another network name correct? Computers can also connect to a relay? I also thought it was strange that when I was scanning for the stations that the MAC address would come up but the name would be listed as "unknown" but am not sure if that is a big deal. One other issue I was experiencing was that my PMG5 couldn't connect to another station after already being connected to one for some unkown reason but luckily I have a PB to work with that had no trouble accessing the different stations to then attempt to configure as I have described. I also wonder if it woud be better to kepp the PMG5 wired from the wired router and then also connect the Main Airport Express to it. If anyone can provide any advice it will be greatly appreciated! Thanks a million!

Sorry, would love to go into fine detail about this but I'm a little tired and frustrated at this point.
I'm basically having the same problem as robosapien. I just want to create this simple configuration :-
AirPort Extreme Base Station (main) <--> AirPort Express (relay) <--> Airport Express (remote)
In following various instruction manuals, common sense and logical experimentation I'm simply failing to get it to work. I've assigned MAC addresses, configured manually and with the set-up assistants but I'm begining to feel that the "multiple" configuration adjustments that happen when setting up a WDS network are somehow cancelling things out.
Here are a few things that are confusing me.
1) It appears I have set things up correctly in a single room environment with MAC addresses in the "right" boxes, main/relay/remote WDS settings assigned correctly and green lights on the 2 Express units. I then move Express 1 (relay) to another room and retain green light status. I then move Express 2 (remote) to it's intended location - another building, but with only 2 walls and 25ft between Express's - but I only get the flashing orange LED. I return to Express 1 and that too is flashing orange, as if Express 2 has messed up it's function when it was powered up. The network has fallen down.
2) When experimenting with configuring each station I don't understand why a single remote base station is in a mode classed as "Create a Wireless Network" as opposed to "Join an existing Wireless Network", but that second option disables access to WDS settings, so I'll hazard a guess that is used for bridging.
I'm sure it's probably all about the order in which you set up the base stations
and which base station holds which MAC addresses, but I've exhausted the logical combinations.
Any help would be greatly appreciated.
Simon
PowerMac G4 Dual 1.42 Mac OS X (10.4.7)

Help getting Outlook 2007 to sync with proper calendar on Blackberry Curve

Hi I'm new to this forum and have looked for specific answers but not luck as of yet. I'll try to explain what I need to happen fully so it may seem like I'm rambling.
I've recently been issued a new computer with Vista and Outlook 2007 for work. Previously I had Win XP and Outlook 2003. Always I had my blackberry set up to recieve all my emails from my personal email accounts as well as my work email.
My problem is that now when I place items on my Outlook 2007 calendar and sync to my blackberry, my Outlook items don't show up on blackberry and vice versa.
If I inititiate calander item from blackberry, making sure I am using work email address, it shows up as appt on blackberry calendar but doesn't show up on Outlook.
If I recieve email invite for appointment on Blackberry, it does show up as appointment. I believe when I set up Outlook 2007 it must be placing the items in a different default calendar, but even though I've selected on blackberry to show all calendars, it still doesn't show up.
Syncing is working properly between the phone and outlook as far as connection, just not showing up.
What I want to happen of course is, enter an item on phone and have it sync to outlook, or enter item on outlook and show up on blackberry..but that's not happening. I've tried all settings I can see and am at a loss.
How can I change what items are in my Outlook 2007 are set as default? It's so screwy I can't even explain what's going on...I'm very tempted to reinstall Outlook 2001 just because it doesn't recognize different calanders so at least all items would show up on blackberry. Help. Thanks.

Okay update. I've deleted all personal address CICAL files in blackberry except for the one I want to use. I cleaned the service records, did a hard reboot, the resynced my phone.
All worked well except for Calendar. My Outlook calendar is full on computer but nothing happened to phone calendar. This makes me think that Outlook 2007 is storing all the calendar entries as a different default, rather than my work email address, but I don't know how to change.
Also, I don't know how to covert entries from one default address to another in Outlook. Probably something in initial setup that I clicked or didn't change properly.
Another question, I sync via cable (not wireless). One of the options in the intellisync setup is Microsoft Outlook Internet Settings or Outlook. I'm using outlook of course but since the MS Outlook Internet Settings is default choice, I've just left it at that (although when I change it nothing seems to happen anyway). Should this be one way or another?
Thanks.

I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. Please help, restoring setting even didn't helped.

I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. The mobile carrier signal as well as WIFI suddenly drops zero and are then restored automatically. Sometimes i cannot conenct to WIFI even standing infront of WIFI router. Please help, restoring setting even didn't helped.

Update: my phone's connecting to the WiFi again. I don't know what did the trick. I did nothing since reinstalling the software. It hadn't worked then, it is now. I tried connecting to my dad's phone's hotspot( he uses a Moto G), and it worked. I then tried connecting to the WiFi at a friend's house, and when I came back home, my phone was able to connect to my WiFi! Is it of any significance that my friend's router doesn't require a password? My issue has been resolved( for now; I hope I'm not counting my chickens before they've hatched). For anyone facing a similar issue, I suggest you try everything I did:
1. Turn your router off for a minimum of 30 seconds, turn it back on and try connecting.
2. Click on the WiFi network you are connected to, scroll to the bottom, tap "Renew Lease".
3. Do a soft and hard reset.
4. Reset network settings.
5. Back your data up, erase all content from settings menu, restore from backup.
6. Reinstall your software( put it in recovery mode).
I am not sure which of the above worked for me. Make sure you try everything. If none of the above works, take it to a genius bar or an authorised service provider. Good luck! :)

Will someone please help me set-up Acrobat to send a PDF via webmail? Acrobat returns a message "Server Connection Error .... Port 143 unavailable"

Will someone please help me set-up Acrobat to send a PDF via webmail? Acrobat returns a message "Server Connection Error .... Port 143 unavailable"

Are you using a Microsoft or Apache web server? If so, you can submit to a server-side script, which will bypass web mail and client-side email software such as OUTLOOK.
For examples:
http://www.nk-inc.com/software/pdfemail.net/examples/

Please help to set the time zone in a porper way

Dear Folks please help to set the time zone in a porper way
select sessiontimezone from dual;
Database: Oracle 11.2.0.2
Operating system: AIX 5.3
SESSIONTIMEZONE
+00:00
SQL> select systimestamp from dual;
SYSTIMESTAMP
06-NOV-12 04.21.07.438426 AM +00:00
SQL> select dbtimezone from dual;
DBTIME
+00:00
SQL> Select DBMS_SCHEDULER.get_sys_time_zone_name from dual;
GET_SYS_TIME_ZONE_NAME
Asia/Kuala_Lumpur
By looking Doc ID: Note:149120.1 in Metalink:
ALTER DATABASE <my db name> SET TIME_ZONE = 'Asia/Kuala_Lumpur'
or
ALTER DATABASE <my db name> SET TIME_ZONE = '+08:00'
For reflecting the change I refreshed the db by shutdown and restart.
but still the returning no timezone value for user schema, please help how to set the time zone in a proper way?

SQL> conn sys/sys as sysdba
Connected.
DBNAME
db
SQL> select u.name || '.' || o.name || '.' || c.name "Col TSLTZ"
2    from sys.obj$ o, sys.col$ c, sys.user$ u
3   where c.type# = 231
4     and o.obj# = c.obj#
5     and u.user# = o.owner#;
no rows selected
SQL> select DBTIMEZONE from dual;
DBTIME
+00:00
SQL> alter database set time_zone='Asia/Kuala_Lumpur';
Database altered.
SQL> select DBTIMEZONE from dual;
DBTIME
+00:00
SQL> startup force;
ORACLE instance started.
Total System Global Area 426852352 bytes
Fixed Size                  1375060 bytes
Variable Size             260048044 bytes
Database Buffers          159383552 bytes
Redo Buffers                6045696 bytes
Database mounted.
Database opened.
SQL> select DBTIMEZONE from dual;
DBTIMEZONE
Asia/Kuala_LumpurRefer:
Re: how to check db time zone
Edited by: Ora on 5 Nov, 2012 11:36 PM

Please help me set up flash player on my macbook

please help me set up flash player. i have downoaded and installed it 10x. even had a professional do it. nothing works. i have a macbook pro 10.7.5

run the uninstaller first: http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html
then manually dl and install fp from the link on this page: http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html#main_Known_i ssues
Progress bar hangs during download / Unable to connect to server / Unable to download metafile
Reason: The Flash Player installer sometimes has trouble working in some firewall proxy server environments.
Workaround: Download the Adobe Flash Player installer directly by clicking one of the following links.
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)

How do i change my iPad language because I went to general and international and changed the language to English, but most things are still in Spanish. Please help me set everything to English

How do i change my iPad language because I went to general and international and changed the language to English, but most things are still in Spanish. Please help me set everything to English

To clarify Settings > General > International > Language is set to English?
and Settings > General > International > Keyboard > includes the English keyboard?
When you are on your Home screen is Settings called 'Settings' in english?
what are the things that are still in Spanish?

Please help me in resolving the URL with parameters.

Hello,
Please help me in resolving the URL with parameters. If desformat is pdf, a pop up message �Acrobat Reader could not open �pa034922.fdf� because it is either not a supported file type or because the file has been corrupted��.
if desformat is html or xml, the following URL is working.
our requirement, report should be in pdf format.
http://servername:7778/dev60cgi/rwcgi60?server=Rep60_mclaren&&userid=bizsystest/test@business&destype=cache&desformat=pdf&report=salary_dept.rdf&p_dept_list=''ABE','ASE','CE','CHE','CS','DE','DIAL','ECE','ERC','IE','ME','PTE','ARC','ASE1''&p_status_list=''ACP','AD','AP','ATP','D','FE','HD','INS','P','RP','S','TF','TP','TS','ST','GS','O''&p_sex=''M','F''&p_order_by='Name'&p_totals='NO'
Thanks in advance,
Usha

We've seen this bug on machines running IE6 with a certain security patch (I forget its number). There's a thread in the Metalink reports forum about it. It appears to be somewhat tied to another problem where IE runs the report twice (you can see that in Showjobs. You're seeing the problem in 6i; I believe it persists in 9i.
The workarounds are (1) set Acrobat so it doesn't open within IE or (2) switch to a different browser, like Netscape. For workaround 1, Start Acrobat Reader, Choose File -> Preferences -> General, Uncheck Web Browser Integration
There's some evidence that it occurs more often with urls that include single quote characters. I think it's worse with XP, but I don't have any proof.
If you check Adobe's site, you will see this isn't just an Oracle Reports problem. I think we're waiting for Microsoft on this one, so don't hold your breath for a quick fix.
-- jim

Please help to get onhand stock report with last purchase and billed date warehouse and item wise

please help to get onhand stock report with last purchase and billed date warehouse and item wise

Hi Rajeesh Ambadi...
Try This
SELECT distinct T0.ITEMCODE , t1.ItemName, T0.ONHAND as 'Total Qty',
T1.LASTPURDAT ,t1.LastPurPrc
FROM OITW T0 INNER JOIN OITM T1 ON T0.ITEMCODE = T1.ITEMCODE
INNER JOIN OITB T2 ON T1.ITMSGRPCOD=T2.ITMSGRPCOD left join ibt1 t3 on t3.itemcode = t0.itemcode and t3.whscode = t0.whscode
WHERE
T0.ONHAND>0
AND T0.WhsCode ='[%0]'
Hope Helpful
Regards
Kennedy

When I plug my iPod into the computer, itunes won't come up on the screen and my iPod is not recognized anymore and it use to be. Please help because I can't sync it at all because it won't show up as a device

When I plug my iPod into the computer, itunes won't come up on the screen and my iPod is not recognized anymore and it use to be. Please help because I can't sync it at all because it won't show up as a device on the right hand side of itunes.

Try
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem

Please help me creating a new listener with different port#.

I have two instances in a server. both have different homes. I want to create a seperate listener for the second one i created.
But that is not happening.
here i tried to give name from LISTENER TO LISTENER1 & Port# from 1521 to 1524.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /apps2/oracle)
(PROGRAM = extproc)
LISTENER1 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = aixth53)(PORT = 1524))
When I check lsnrctl status with LISTENER1 , it still shows the other instance home with port#: 1521
Please help me creating a new listener with different port#.
Thanks,

marist89 wrote:
sb92075 wrote:
marist89 wrote:
sybrand_b wrote:
The listener is a broker only and doesn't play any role in normal communications.
It just forks a process or a thread, and that's it.And the listener is a single point of failure. Listener goes down, you can't connect to the db. That's why you need two listeners.If listener one goes down, then listener two goes down for exact same reason since it is a single executable file.I'm not playing tit-for-tat with you. Fact is, there are situations where people who are not you might want to use more than one listener.Some folks might want to jab a sharp pencil into their eye, too.
Just because you can do something, it does not necessarily mean it should be done.

My itunes will not! is giving me error7(windows error 126) and is stilling me MSVCR80.dll is missing and i tried downloading itunes like 6 times and is saying the same thing. Please help! i need to sync my kids ipads and ipods thank you!

my itunes will not open! is giving me error7(windows error 126) and is stilling me MSVCR80.dll is missing and i tried downloading itunes like 6 times and is saying the same thing. Please help! i need to sync my kids ipads and ipods
thank you!

Follow the instructions of tt2 given in https://discussions.apple.com/thread/5822086

8330 Curve. Please help me set up to sync with Google Calendar.

Similar Messages

Maybe you are looking for