8600 GT (Line with custom MSI cooler)..

Please, I have a question, on the MSI NX8600GT-T2D512E/D3 (All the line) that has a custom cooler, can I read cooler RPM's with the ntune software ? I read that we cannot change fan speed on that version, but can I unleast check the fan speed ?
Thanks.

I think your best bet would be RivaTuner.

Similar Messages

Line item report with Customer number

Hi all,
I am facing the following issue:
I need a line item report to analyze an accrual account by customer.
Since the customer is not captured on the accrual account itself, but on the recon. account (which is not defined as line item display), I did not find a way to present the customer and the accrual on the same line.
I can always go to BSEG and vlookup and match by document number the accrual account and the customers from the customer recon. account, but I thought maybe someone has a better idea.
Thanks,
Yoel.

If the recon account line items have al lthe info needed I'd suggest using a query (SQ01).
1. Create an Infoset in SQ02 with logical database "BRM". Choose the fields from BSEG that you need
2. Create the Query in SQ01 using that Infoset.
If you want to see individual line items, include the fields you want in the "basic list" of the query. If you want totals by customer, don't include anything in the basic list, but make a "statistics" with customer and amount.
Selections would habe to be made for account no and period.

Runtime error - FBL1N - vendor balance with customer line item

Hi gurus,
One scenario where i have assign vendor as customer & customer as vendor in vendor & customer data. also make tick mark for both clearing with vendor & customer.
when i see the customer report with vendor item it shows me the customer & vendor dues but when i tried to see the vendor balance with customer line item it gives dump error.
Runtime Errors         PERFORM_NOT_FOUND
Exception              CX_SY_DYN_CALL_ILLEGAL_FORM
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FORM', was
     not caught in
    procedure "%_LDB_CALLBACK" "(FORM)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    The program "RSDBRUNT" is meant to execute an external PERFORM,
    namely the routine "CB_DDF_GET_KNA1 " of the program "RFITEMAP ", but
    this routine does not exist.
    This may be due to any of the following reasons:
    1. One of the programs "RSDBRUNT" or "RFITEMAP " is currently being developed.
    The name "CB_DDF_GET_KNA1 " of the called routine may be incorrect, or
    the routine "CB_DDF_GET_KNA1 " is not yet implemented in the program "RFITEMAP
    2. If the program SAPMSSY1 is involved in the runtime error, one of
    the function modules called via RFC is not flagged as remote-capable.
    (see Transaction SE37 Goto -> Administration -> RFC flag)
    3. There is an inconsistency in the system. The versions of the
    programs "RSDBRUNT" and "RFITEMAP " do not match.
Warm regards,
Dhananjay R.

Hi martin
still problem was not solved. actually i am working on ECC 6.0 & not required to implement the sap note on development. i had done the configuration in vendor master & customer master for clearing.
please suggest me.....what to do ?
Than'x
Dhananjay R

Timesheet Error with custom Line Classifications in Project Server 2013

We implemented Project Server 2013 last year and began using timesheets. We are a billable consulting group. In order manage our billing, we have created three custom line classifications, "Billable Onsite", "Billable Offsite",
and "Non-billable". We do not use "Standard" as a line where time is entered. We are using SEM. We have chosen no prepopulation on timesheets. Our system is updated through the March 2013 update.
The error we get is presented as "__error Loading" with the title bar of the pop-up reading "Message from webpage". This occurs when you attempt to add a new line to a timesheet and choose one of the custom line classifications.
A confusing aspect to this, while we have prepopulation turned off, the timesheet is populated with "Standard" lines for the tasks that are currently assigned to the user. We have come up with a workaround that works sometimes but not all the
time. When the user receives this error, they move away from the timesheet screen and then return. They add all of the applicable lines to the timesheet with "Standard" even if they already exist on the timesheet and save. Then
they add the lines with the appropriate line classification and the time. If they receive the "__error loading" error again, then the timesheet can not be corrected. You must delete the timesheet and recreate. We have been able
to recreate the problem in a vanilla install with a custom line classification added.
Just yesterday, I was able to find a error log entry that may help some of you identify the source:
General Unhandled Exception in _TimeSheet.GetTimesheetForGridJsonFromViewUid_ Attributes: System.ArgumentException: Assignment line already exists for assignment uid: d9afeb60-d589-e311-bd64-08edb9dd8afb     at Microsoft.Office.Project.Server.BusinessLayer.Timesheet.VerifyLineIsUnique(Guid
assignmentUid, Guid taskUid, Guid projectUid, Guid lineClassUid)
at Microsoft.Office.Project.Server.BusinessLayer.Timesheet.CreateAssignmentLine(Guid assignmentUid, Guid taskUid, Guid projectUid, Guid lineClassUid, String taskName, String projectName)     at Microsoft.Office.Project.Server.BusinessLayer.TimesheetSEM.CreateAssignmentLine(Guid
assignmentUid, Guid taskUid, Guid projectUid, Guid lineClassUid, String taskName, String projectName)     at Microsoft.Office.Project.Server.BusinessLayer.Timesheet.AddTimesheetLine(Guid assignmentUid, Guid taskUid, Guid projectUid, Guid
classUid, ValidationType validationType, Guid lineUid, String taskName, String projectName, String comment)     at Microsoft.Office.Project.Server.BusinessLayer.Timesheet.ImportTimesheetLine(NewTask importedLine)
at Microsoft.Office.Project.Server.BusinessLayer.Timesheet.<>c__DisplayClass4c.<AddNewLines>b__49(NewTask line)     at Microsoft.Office.Project.Server.Library.PSUtility.Apply[T](IEnumerable`1 enumerable, Action`1 fn)
at Microsoft.Office.Project.Server.BusinessLayer.Timesheet.AddNewLines(IEnumerable`1 newLines)     at Microsoft.Office.Project.Server.BusinessLayer.TimesheetSEM.AddNewLines(IEnumerable`1 newLines)     at Microsoft.Office.Project.Server.BusinessLayer.TimesheetLoaderForGrid.Load()
at Microsoft.Office.Project.Server.BusinessLayer.TimeSheet.GetTimesheetForGridJsonFromViewUid(JsGridSerializerArguments gridSerializerArgs, Guid tsUid, Guid viewUid, String changesJson, String viewOptionsJson)     at Microsoft.Office.Project.Server.Wcf.Implementation.PWAImpl.<>c__DisplayClass2f5.<TimeSheetGetTimesheetForGridJsonFromViewUid>b__2f4()
at Microsoft.Office.Project.Server.Wcf.Implementation.WcfMethodInvocation.InvokeBusinessObjectMethod(String businessObjectName, String methodName, IEnumerable`1 actions) . Standard Information: PSI Entry Point: Project User: i:0#.w|mayberry\nunderwood
Correlation Id: 91c4ca27-6492-e311-93ff-00155d149902 PWA Site URL: XXX SA Name: Project Services Application PSError: GeneralUnhandledException (42), LogLevelManager Warning-ulsID:0x00101622 has no entities explicitly specified.
We have not been able to find any similar timesheet issues here or on other boards. Our users, as you can imagine, are getting increasingly frustrated. A ny advice?
Thanks,
Nate

More scenario testing today. Tested with both "No Prepopulation" and populate assigned task options! no difference in our instance. We are only updated through March 2013, waiting for IT support. We have previously tried the deactivation/reactivation
of custom classifications. Tried with and without template, no difference. So the new scenario and findings:
1. Create a project with 2 tasks, one assigned and one not. Save and publish.
2. Create a timesheet, do not use an existing timesheet. Here we found, in spite of population option chosen, the timesheet was populated with a Standard line for the assigned task. With no action taken other than creating timesheet, the reporting assignment
table showed the new entry.
3. Add an assignment to the other task in the project, publish.
4. Open the same timesheet period. Now I saw the other task appear on the screen. It did not show in the database. I could not save to make it appear in the database unless I did something else to the screen to make it "dirty". Once I did that,
I could save and the second Standard line appeared In the database.
If I tried to add a custom line class line to the TS when the Standard line was not in the database, I get the error. It doesn't matter if it shows on the screen.
If it shows on the screen but not in the db, and I attempt to add a non-standard line, it will error, unless I manually add the standard line first. The user would not know to do this.
You will not be able to reproduce if you make the assignments and then create the TS. You need to try in reverse order.
It appears as though there are issues with both the timesheet population options and the code that runs when the TS loads after it's initial creation. I'm wondering why on creation the standard line is created and committed to the db, but on reload with
new tasks it doesn't' do the same. Also when No Prepopulation is turned on, why my time sheets are always prepopulated.
Sorry for any typos, working from my ipad keyboard. Thanks for your help!

Schedule line per customer with strategy 40

Hello Forum,
Is it possible to generate Schedule line per customer with strategy 40 ?
For instance for a product 'ABC' we have one vendor 'Z' and two customers 'LMN' and 'PQR'.
When we are executing the MRP then SAP is generating schedule line for total demand and not individual per customer . Can we do it with strategy 40 ?
Thanks

Hello
This is not possible with strategy 40.
Check the following information provided on FAQ note 550568:
Question:
There are several requirements on one day. Is it possible that the MRP creates a separate procurement proposal for every requirement?
Answer:
Same as for the daily lot size with a number of periods = 1 (lot size TB), requirements of one day are also grouped into one procurement proposal for the lot-for-lot order quantity (lot size EX) (see documentation for the lot-for-lot order quantity). Separate procurement proposals can be achieved only if you work with make-to-order production. Here, the requirements are managed in separate planning segments of the stock/requirements list.
You should try with an MTO strategy, such as 20.
BR
Caetano

My MSI KT3-ULTRA2 doesn't work with my CPU cooler!!

My MSI KT3-ULTRA2 doesn't work with my CPU cooler!!
I've got an MSI KT3-ULTRA2 mainbord, and I have a NEOLEC VENEZIA TB Cooler. But when I attach my NEOLEC cooler and I start the machine, the machine shuts down within a couple of seconds, and I get nothing to see on my screen. The weird thing is when I turn the PC on, the cooler starts rotating so it can't be broke, but then the pc shuts down i a couple of secs. So pleezze anybody help me!!
The weird thing is that I also have a coolermaster cooler, and that one works fine. But the problem is that this coolermaster is designed for AMD XP 1900+, and I ahve an AMD XP 2200+ that's why I bought the Neolec Venezia TB cooler.
Grtzz
skeleton

one easy thing to watch for... see if the heatsink or fan is in contact with any part of the motherboard, like... if it is too big and touches something that normally wouldn't be in contact with a fan or heatsink. If so, it could be shorting it.

Hi there i have ipod touch 2nd gen and i am tryna restore it but i get error 21 with orginal fireware and 1601 with custom fireware and when it connected to itunes and i try to boot it up by restoring it white screen with lines thorugh it

hi there i ahve ipod touch 2nd gen and i am tryna restore it but get error 21 with orginal fireware and 1601 with custom firewarw and when connected it to itunes and i try to boot it by resotring it white screen with lines through it

Those errors are covered here:
http://support.apple.com/kb/TS3694

How to fix bad line spacing with custom image bullet when displaying on iPad

So I have a presentation with custom image bullets for a couple slides. The bullets are fine when displayed on a mac, but when I move it over to the iPad the line spacing of the bullets and the text gets further out of horizontal alignment the more lines I add. I've tried adjusting the size of the bullets larger and smaller to see if that would help but it makes no difference either way.
I know the easiest thing is to get rid of the custom image bullets, but this issue makes no sense to me and I'd really like to solve it.
Here's how it looks on the mac:
Here's how it looks on the iPad (took a photo and I know it's a little warped but I've shown where the issue is occurring):

-> press '''CTRL''' + '''0''' (zero) to '''Reset''' Zoom
* For details, see this article -> [[How do I use Zoom?]]
Check and tell if its working.

List of Compatible CPU Cooling Fans with my MSI X48C Motherboard

Just wondering if there is a list of compatible CPU Cooling Fans/Heatsinks that go with the MSI X48C MOBO. I am using a Q9550. Ones that I am considering:
Cooler Master Hyper N520 CPU Cooler
Zalman 9700[NT]
Thermaltake SpinQ CPU Cooler
Also, if you know of any others that would be good, feel free to add your opinion!
Thanks for the help!

I am personally partial to Thermalright products for cpu cooling. I use nothing else. Copper ones tend to be much heavier than non-copper ones and can actually over time put undue stress on the board around the cpu socket. Besides, I havent seen enough of a difference in temps when using copper versus non-copper to warrant about getting a copper one. Heres one from thermalright I like.....
http://www.thermalright.com/new_a_page/product_page/cpu/si-128_se/product_cpu_cooler_si128se.html
For the fan, get a Thermaltake silent cat 120. Killer combo.

Anyone know how to contact anyone in Verizon headquarters? Since I'm not getting anywhere with Customer Service

I'd like to express how unsatisfied we have been with Verizon on an issue that has been ongoing now since March 14, 2014. It involves an upgrade on one of our lines. After all these months, phone call with customer service, Tech support, and visits to a Verizon stores, I would hope that there are ample notation on our acct but since I've had to explain the situation on a bi-weekly time frame, I would assume that no one has documented any contacts.
We've been with Verizon for few yrs now and I have always been very satisfied with Verizon who, up until now , always provided excellent customer service in their knowledge, concern, and customer satisfaction. But I have to say, every positive outlook I've had with your company has been wiped clean with the worst service we have received in the last few months.
We upgraded my daughter's phone on 03-14-14 with a Samsung Galaxy Mini from an Iphone 4s. Within 24 hrs, the phone failed. After 2 visits to a Verizon store the next day which took 6 hrs, we still had to return the next day to speak to a manager. The 2 stores advised us to make a CLAIM on the defective phone thru our insurance plan with Verizon. A CLAIM on a 24 hr old phone!! A 3rd visit with a manager finally convinced him to replace the phone with another new phone at the store. Within 2 weeks - issues began to occur with the replacement phone. Several visits more, several calls more with Customer Service, several calls more with tech support which adds up to soooo many of our time taken up to simple have temporary "fixes" is outrageous. If I billed Verizon for my time, perhaps the situation would have been resolved more quickly. Each visit lasts approx 2 hrs, each phone call approx 1-1 1/2 hrs. We are talking at least 2x a month for the course of 5 1/2 months. Plus the time it takes to get the phone back to where she needs it - contacts, apps, internet.
Not once were we offered a new phone or replace the phone. Not until today. Replace the phone with the same phone that my daughter has grown to hate. So basically a 3rd phone - same phone. She is not interested in this phone any longer. She dealt with this phone model for far too long.
Today we were offered to replace the phone with same phone, or pay for a refurbished Iphone 4. So basically she would be going back to her original Iphone 4s before the upgraded WITH a cost. So her upgrade was wasted, we'd paid over $200 for a defective phone, and would need to pay for an even older model Iphone 4 and have to pay for it. Why wasn't she offered a different phone within those 30 days after the upgrade and 6 visits?
Every rep at the stores, every rep in tech support would provide a different reason for the issue. Finally, tech support advised not to download apps. WHAT GOOD IS A SMARTPHONE IF YOU CAN'T HAVE APPS??? We are talking about a 20 yrs college student who attends school in another state. Do you know the trouble she has to go thru to visit a store? To find 2 hrs between being a full time student with 2 jobs to sit on the phone with a tech support or go to a Verizon store? Once-ok Twice-maybe BUT for 5 months?
She's not eligible for an upgrade. She will be stuck with a phone that she had grown to hate. And I with customer service which I've grown to hate.
Finally, The Edge. Trying to find a way to make my daughter happy, I spoke with 4 representative today about the Edge. Each rep gave me 4 different information. 1st rep advised Edge phone could not be used on another line so I could not use a line eligible for the Edge and give that phone to my daughter since she isn't eligible for the Edge. 2nd rep advised that although new phone thru edge must be used by same number that it was eligible for, we could use the current phone o that line for my daughter. My son currently has an Iphone 5 and is eligible for the Edge early upgrade. He would not have to return his Iphone 5 so my daughter could use it. However, all the lines would have to go to the More Everything Plan and share the Data between all our phone lines. 3rd rep advised the cost would almost double from our current $358 to go to the More Everything Plan so suggested to have 2 accounts vs just 1. 4th rep advised not every line needs to go the More Everything Plan, we could not keep the current phone, and my daughter could get a replacement phone but same phone or made exception to offer the Edge early upgrade to my daughter but only after we go thru the replacement program because the phone we send to Verizon has to be in good working order/no defects.
After 5 1/2 months, it is now Verizon that is indicating that we have a defective phone and can't accept it thru the Edge program or we would get billed approx $299 for a defective phone. After 5 1/2 months of me calling in about a defective phone that not one rep replaced because they "fixed" the problem ( by the way, a temporary fix is not fixing, if it was fixed I would have made those calls today or writing this email), I am now being told her phone is defective. She advised to get a replacement phone first, return the old phone, activate the new phone, then call in to get the Edge early upgrade. So my daughter would have to do all this, plus add contacts back, apps and whatever else she needs to use her phone just to turn around a couple weeks later and do it all over again with the new phone thru the Edge program. Once again, we are the ones having to be inconvenienced and go thru all these steps. Did I mention she is going to be studying abroad in Italy beginning Nov? So the idea of having to wait 2-3 weeks for a new phone and having only a week or 2 to test the phone to make sure it's working properly before she's out of the country doesn't sound appealing to me. Verizon has made us have a defective phone for 5 months advising it's in good working order after each and every "fix" but Verizon will not accept that phone if returned in the same condition as a phone in good working condition. Do you see the irony in that?
I have reached my limit and after 5 yrs of my brother in law trying to convince us to switch to AT&T where he works in their Corporate Office, I can honestly say I will not be sad to leave Verizon. Especially when one of your reps simply provided me with the contract end dates to provide to AT&T because they offered to buy out our contract. No effort in customer retention what so ever. That was a phone call on Thursday.
And yes, one of your tech reps tried to convince me of all the hassle it would be to switch and time AT&T would take to buy out our contracts but honestly it was the pot calling the kettle. I am not in the position to discuss hassle and time after 5 months of getting that with Verizon. Did I mention it's my brother in law so we would be getting special treatment and no out of pocket expenses to switch. It was my loyalty and satisfaction with Verizon that has kept me from switching all these years. Something Verizon clearly does not appreciate.
So can you guess where I am with confidence that your customer service department is knowledgable about the plans/offers? Where I am that I can trust what I'm being told?
I know this email is confusing and really hard to understand...perhaps now you will know how i've been feeling--lost and confused with all the mis-information, with a hit and miss phone, and out of time with all the 1 1/2 hr to 2 hrs EACH wasted on this issue.
On top of all this, I can't even find out how to file a complaint with anyone higher up than Customer Service.

Jneklason wrote:
~snip~
I know this email is confusing and really hard to understand...perhaps now you will know how i've been feeling--lost and confused with all the mis-information, with a hit and miss phone, and out of time with all the 1 1/2 hr to 2 hrs EACH wasted on this issue.
On top of all this, I can't even find out how to file a complaint with anyone higher up than Customer Service.
I hate to tell you this, but you didn't write an email. You wrote a discussion post on the Verizon Wireless Community forum which is a public peer to peer forum. Unfortunately since you didn't mark your post as a question, the VZW reps that roam this community won't ever see your post. Before you re-post it, don't. Duplicate posts get removed from the community.
I see there were several missteps both by the reps and yourself in your post. First you should have insisted on returning the phone within the 14 day return policy period. Second which Samsung Galaxy mini model did you purchase? The S3 mini or the S4 mini? Did you do any research prior to deciding on this device. The reps at that time deflected the easiest course of action, by trying to get you to replace the phone under insurance instead of returning the phone. The Early Edge payment option requires the current phone on the line using the early Edge must be returned to Verizon Wireless. Did you once considered going to a third party site like Swappa to purchase a gently used device for your daughter?

WP8 Map control with custom tiles

I'm trying to display a map control in my app targeting Windows Phone 8 but I want to use custom tiles from open street map.
I'm using this line :
mapControl.TileSources.Add(new TileSource("http://a.tile.openstreetmap.org/{zoomLevel}/{x}/{y}.png"));
When I launch the app the custom tiles are properly displayed, but there's still the default map tiles underneath them.
I tried to hide them, but I counld'nt even find where they exist in the map control and what is displaying them exactly.
I would like to know how I can remove those default tiles when loading custom tiles.
I tried to hide them, but I counld'nt even find where they exist in the map control and what is displaying them exactly.

Hi MakanWG,
You have solved your question in here:
http://stackoverflow.com/questions/27948331/wp8-map-control-with-custom-tiles .
Good!
Vote if help you

Multi Line Text Custom Field

Multi line text custom field is not coming in ms project Professional

Pradeep,
You cannot access Multiline text fields from Project Professional and in Project Server Views. These fields are for use in Project Details pages and with workflow for demand management in Project Server. Please refer to the article shared in earlier post.
I would recommend you to create a Excel/SSRS report if you would like to show data available in this fields to end users.
Hope this helps.
===================================================
Thank you,
Kiran K.
If a post answers your question, please click "Mark As Answer" on that post and "Vote as Helpful

How Can I replace newScale Text Strings with Custom Values?

How Can I replace newScale Text Strings with Custom Values?
How can I replace newScale text strings with custom values?
All newScale text is customizable. Follow the procedure below to change the value of any text string that appears in RequestCenter online pages.
Procedure
1. Find out the String ID of the text string you would like to overwrite by turning on the String ID display:
a) Navigate to the RequestCenter.ear/config directory.
b) Open the newscale.properties file and add the following name-value pair at the end of the file:res.format=2
c) Save the file.
d) Repeat steps b and c for the RmiConfig.prop and RequestCenter.prop files.
e) Stop and restart the RequestCenter service.
f) Log in to RequestCenter and browse to the page that has the text you want to overwrite. In front of the text you will now see the String ID.
g) Note down the String ID's you want to change.
2. Navigate to the directory: /RequestCenter.ear/RequestCenter.war/WEB-INF/classes/com/newscale/bfw.
3. Create the following sub-directory: res/resources
4. Create the following empty text files in the directory you just created:
RequestCenter_0.properties
RequestCenter_1.properties
RequestCenter_2.properties
RequestCenter_3.properties
RequestCenter_4.properties
RequestCenter_5.properties
RequestCenter_6.properties
RequestCenter_7.properties
5. Add the custom text strings to the appropriate RequestCenter_<Number>.properties file in the following manner (name-value pair) StringID=YourCustomTextString
Example: The StringID for "Available Work" in ServiceManager is 699.
If you wanted to change "Available Work" to "General Inbox", you would add the following line to the RequestCenter_0.properties file
699=General Inbox
Strings are divided into the following files, based on their numeric ID:
Strings are divided into the following files, based on their numeric ID:
String ID File Name
0 to 999 -> RequestCenter_0.properties
1000 to 1999 -> RequestCenter_1.properties
2000 to 2999 -> RequestCenter_2.properties
3000 to 3999 -> RequestCenter_3.properties
4000 to 4999 -> RequestCenter_4.properties
5000 to 5999 -> RequestCenter_5.properties
6000 to 6999 -> RequestCenter_6.properties
7000 to 7999 -> RequestCenter_7.properties
6. Turn off the String ID display by removing (or commenting out) the line "res.format=2" from the newscale.properties, RequestCenter.prop and RmiConfig.prop files
7. Restart RequestCenter.
Your customized text should be displayed.

I've recently come across this information and it was very helpful in changing some of the inline text.
However, one place that seemed out of reach with this method was the three main buttons on an "Order" page. Specifically the "Add & Review Order" button was confusing some of our users.
Through the use of JavaScript we were able to modify the label of this button. We placed JS in the footer.html file that changes the value of the butt

How can I print the "number lines" with the code in Visual Studio?

How can I print the "number lines" with the code in Visual Studio?

Hi BillionaireMan,
What about your issue now?
If you have resolved it, you can share the solution here, which will be beneficial for other members with the same issue.
If you did not, please tell us more information,we will try my best to help you.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Red line with number 11 beside it

At the top right of my screen of my 8520 I have a red line with the number 11 beside it any ideas what it is?

calspm wrote:
Well at first I got "Set Top box does not match the account settings" message, and then tried to reboot, but then got the "X". So maybe there is an account settings problem.
Click the ATT Uverse Care link in my signature, send the PM, explain your situation.
Include your account #, email address and a good phone # (land or cell) and time to contact you on.
Check the blue PM envelope, upper right on every page, for their reply.
They can reset the error code that is causing your problems. Good luck
Chris
Please NO SD stretch-o-vision or 480 SD HD Channels
Need Help? PM ATT Uverse Care (all service problems)
ATT Customer Care(all other problems)
Your Results May Vary, In My Humble Opinion
I Call It Like I See It, Simply a U-verse user, nothing more

8600 GT (Line with custom MSI cooler)..

Similar Messages

Maybe you are looking for