865 - Remote works in HiFi but not w/ Media Center III. Girder??

First of all, kudos to all of you for supporting each other in getting the MEGA to operate as intended. I have a couple questions maybe you can help me with:
Does anyone know of a quick fix for re-associating the bundled remote with Media Center III? Mine worked initially, but when I loaded the drivers for the remote bundled with my MSI Personal Cinema FX-5200 card it stopped operating in Media Center III. The remote works in HiFi mode without a hitch, but not at all in PC mode.
Also, can the Girder software be used to program other remotes controls, like the one that came with my Personal Cinema card (NVidia remote, USB interface)? It is a much better remote than the MSI remote and would be a great replacement. I looked in the plug-ins on the girder website an could not find any related to the Personal Cinema product.
thanks for your help!!

Akumaisme,
I don't know about an independent karaoke function, but MSI has included a separate program for the radio part on the drivers disc: MSI Radio. Installing this program enables you to use the same functions of the radio in PC-mode as you can in Hifi-mode, without the need to install MCIII.
As far as Girder is concerned, maybe this will explain things: Girder is used to "catch" the commands (button strokes) from your remote receiver and (if neccessary) divert them to other programs. For this you need two things: a working pair of remote and receiver, and a Girder plugin that is written for the specific type of receiver.
So should you choose to be able to use the MSI remote (which I believe is not the case) with other programs than MCIII, you need the Girder plugin written by Nathan (see Sticky at the top of this forum).
I think you want to use the second option: a different (third party) remote. First of all, you most likely won't be able to use this remote with the built-in MEGA receiver. You'll need the receiver of your Personal Cinema card. Then you'll have to take a look at the Girder site / forum whether there is a plugin available for this Personal Cinema card, good chance there is. After installation, you then only need to configure Girder with the proper plugin AND need to learn it to divert the button strokes of your Personal Cinema remote to the MCIII application.
I hope you'll find this information useful.
Greetz,
JaDi.

Similar Messages

Sockets work on localhost but not remotely?

hi there,
I have created a simple multithreaded client / server program.
The Server listens on port 2222 for clients. When a client connects - the client sends its ip address to the server and then disconects. More than 1 client can connect at the same time to the server and the server also listens continuasly. I have 2 problems with the program...
a) the programs work on localhost but not on remote machines? (Well not over my LAN anyway).
b) I am getting 2 lots of 'datain' when the server recieves an ip address from the client when the client should only send it once.
The code is below - any help would be greatly appreciated.
//TCPServer.java
import java.io.*;
import java.net.*;
class TCPServer {
     public static void main (String args[]) throws IOException {
          ServerSocket serverSocket = null;
          boolean listening = true;
          try {
               serverSocket = new ServerSocket(2222);
          } catch (IOException e) {
               System.err.println("Could not listen on port: 2222");
               System.exit(-1);
          System.out.println("Server Started...\n");
          while (listening)
          new TCPServerThread(serverSocket.accept()).start();
          serverSocket.close();
//TCPServerThread.java
import java.net.*;
import java.io.*;
public class TCPServerThread extends Thread {
    public Socket socket;
    public TCPServerThread(Socket socket) {
     super("TCPServerThread");
     this.socket = socket;
    public void run() {
               try {
               BufferedReader datain = new BufferedReader (new InputStreamReader
                    (socket.getInputStream()));
                    System.out.println("ip address recieved");
                    System.out.println (datain.readLine () + "\n");
               } catch (IOException e) {
                    System.err.println("Cannot read in ip address\n");
                    e.printStackTrace(); // show the error
                    System.exit(-1);
     } //TCPClient.java
import java.io.*;
import java.net.*;
class TCPClient {
     public static void main (String args[]) throws Exception
          String hostname;
          int portNumber;
          String portString;
          BufferedReader inFromUser =
               new BufferedReader (new InputStreamReader(System.in));
               System.out.println("What host would you like to connect to?");
               hostname = inFromUser.readLine();
               System.out.println("What port would you like to connect to?");
               portString = inFromUser.readLine();
               portNumber = Integer.parseInt(portString);
               System.out.println("Connecting to port " + portNumber + " of " + hostname + "....\n");
                    Socket clientSocket = new Socket(hostname, portNumber);
                    Socket sock = new Socket (InetAddress.getLocalHost(), portNumber);
                    BufferedWriter dataout;
                    java.net.InetAddress i = java.net.InetAddress.getLocalHost();
                    System.out.println("Sending ip address...\n" + i.getHostAddress());
                         dataout = new BufferedWriter (new OutputStreamWriter (sock.getOutputStream()));
                              dataout.write (i.getHostAddress());
                              dataout.flush();
                              sock.close();
                                   clientSocket.close();
                         }Oh, yeah - check out my site below, I am trying to write an audio streaming client / server in Java if anyone is interested in getting involved or just being nosey....
http://www.projectg.dsl.pipex.com

In your client you are creating two sockets (why?). One connected to localhost, the other connected to the host specified using readLine.
If your client runs on the same machine you have started your server, you have two connects to your server instead of one.
The ip adresse is sent using the socket connected to localhost. That is why it does not work on remote machines.
Hope this helps.
Jörg

Slideshow works on local but not remote server?

Slideshow works on local but not remote server? The site is patriceclarkson.com.

When I compare your:
http://www.warpd.ca/SpryAssets/SpryWidget.js
to this one:
http://labs.adobe.com/technologies/spry/ui/includes/SpryWidget.js
I do not see the same file. Try uploading the correct file and check again.
Xav

Remote for only Macbook but not dock

hello everbody,
is there any way that use the remote control only MacBook but not ipod dock? because when i push the play button, i got my ipod and macbook react in the same time.
thanks for your help.

If you have two remotes you can pair one to work with the macbook and one to work with the ipod.
You can find instructions on how to pair a remote with a mac here: http://support.apple.com/kb/HT1619
and instructions to pair with an ipod here:
http://support.apple.com/kb/TA23708
hope this helps!

Custom F4 help in a BSP application working in Mozilla but not in IE

Hi,
I have created a custom F4 help in a BSP application.
It is working in Mozilla but not in IE. I tried enabling javascript as well but still it is not working.
Can someone please suggest a possible solution for this?

Hi,
See simmilar discussion in thread /thread/1883519 [original link is broken]
I think this may be helpful for you.
Thanks,
Chandra

Why does the counter work in MAX, but not Labview?

Please help, I have been away from Labview for over 3 months, and I am quite rusty....
Last year, I successfully configured NI9401 to measure period (seconds) by counting the rising edges of my sensor signal. Since then, I have aquired a new PC, and loaded all my software into it, including the Labview VI's that successfully worked on the old computer.
I can see the digital signal using MAX and the test panel for the NI9401, so, I know my wiring and my TTL signal is OK, but, when I try to run the attached VI, nothing happens except the error below.. How do I tell this VI to look for the signal on MOD3/CTR0 and channel 14?
Thanks. I am sure it is a small adjustment...this worked fine a few months ago...not sure what is wrong now.
Thanks,
Dave
Solved!
Go to Solution.
Attachments:
continuously measure period buffered_singlechannel_forum_feb_23_2012.vi ‏20 KB

OK, now. Resolved the issue. The vi is fine, but, some shaky wires were identified...worked in MAX but not in the vi. Now that the connections have been tightened up, it works for both. Sorry for the inconvenience.
Dave

Works on emulators but not on mobile devices

Hello,
My project works on emulators but not on mobile devices (no image and on Samsung it says "unsupported file").
Please help, I don't know what to do. My configurations: MIDP 2.1, CLDC 1.1.
Thanks in advance.
Edited by: Vitali.pom on Oct 27, 2011 12:01 PM

Edit: I succeeded to solve it accidentally. I did the following: Sign the jar in Netbeans, clean and build, the jar didn't work, I wiped out the .ks from the jar and clean and build again. Now it worked.
Edited by: Vitali.pom on Oct 30, 2011 1:28 AM

Wifi works at home but not when away from home

My Wifi works at home but not when away from home, what is wrong? I thought with a phone plan I didn't need to have a wifi connection.

You either need WiFi or Cellular (or both). If you have neither, you can't connect to the internet.
Most people use WiFi at home and Cellular while away from home, or connect to public WiFi networks where there are some.

Can't FaceTime anymore? iPad states wifi connected and iPhone 4 states not connected? I have wireless in my home? Not sure what happened. Password works for iPad but not on phone?

iPhone won't connect to wifi. iPad is connected. Password working on iPad but not on phone. Can't upload software update of IOS 7.1 because phone not connecting to wifi?

Connect iPhone to computer and open iTunes. You will be prompted to update to iOS 7.0. Keep your phone connected until the update is finished.

My apple id works on itunes but not on my ipod touch, what gives ?

my apple id works on itunes but not on my ipod touch, what gives ?

What are you trying to do on the iPod?
Have you went to Settings>Store and sign out and then sign back in?

Album Art works for most, but not all

I was reading previous forums on the subject, but no clear answer was given..
The album art shows up fine in itunes and my library and works for most of my music on my ipod, but how come some album's art does appear? I have it set manually and select 'Get Info' then 'Artwork' and add it from there, then drag in the finished product to my ipod. I've been doing that and it works fine for most of the albums, but every so often, the album art will not appear on my ipod. Am I doing something wrong? I take them all from the same source (amazon.com) but it makes no sense to me how some randomly don't appear.
I tried deleting the artwork and re-adding it, but nothing happened again. If you could answer why it works for most but not all or how I can get the album art to appear for the ones it will not by re-doing something, it would be appreciated. thanks.

I encountered the same problem in the beginning. When I compared the size of the original images, the working ones seemed to be smaller in general, so I reduced the size of all covers I intended to upload on the pod to 300x300 pixels.
This seemed to work - for 2 days. I bought the pod on friday, had pictures on sunday, but on Monday (after the first time the pod was fully discharged) none were left left.
So I ended searching this forum for related problems...
And decided to join my problem to this entry.

How to send active links in email from firefox. Works in IE but not Firefox... Is there a setting to change?

how to send active links in email from firefox. Works in IE but not Firefox... Is there a setting to change?
== This happened ==
Every time Firefox opened
== Always

Check with your web mail service provider for help with that issue.

Medical app from Intuit works in IE, but not Firefox.

Encrypted medical app works in new IE, but not Firefox. Everything works down to the end, and click on "continue" and nothing happens. A tech and I have spent hours on this. Did not work on FF5 or 6. Did not work on old IE, but did on fresh new version with no data files copied in.

If it works in IE but not FF, then it has nothing to do with the mp3s. More likely it's because of the HTML on the page.
To start, page is missing DOCTYPE declaration... a MAJOR problem. The DOCTYPE declares which set of rules the browser will use to display the page. Without it, different browsers go crazy or do not work at all.
http://www.w3schools.com/tags/tag_DOCTYPE.asp
Validate the html code here:
http://validator.w3.org/
You will have to fix all the errors if you want this to work in all browsers.
Best wishes,
Adninjastrator

Flash Player works in Safari but not Internet Explorer 9

I've installed Flash Player 10.3 and it works in Safari but not Internet Explorer 9. When I look in Manage Add-Ins I see Flash Shockwave but not Flash Player. My operating system is Windows Vista Ultimate (32bit). Safari is 5.0.5 and IE 9 is 9.0.8112.16421. I've tried uninstalling and re-installing Flash Player and uninstalling Norton 360. Nothing has worked so far. Can you help?

Thank you for your reply. Shockwave is loaded and enabled.
The files in flash directory are: a folder called FlashPlayerTrust: file, flash10q.ocx: file, FlashInstall.log; file, FlashUtil10q_ActiveX.dll; file, FlashUtil10q_ActiveX.exe, file, install.log.
There is no file: NPSWF32.dll.
When I test the browsers I get no spinning logo in either Safari or IE9. Safari says: missing plug-in, where I think the logo should be. IE-9 says nothing at the same location.
Thanks.

Navigation works in IE but not Firefox or Safari!

Hi guys
Why do my nav links on the hompage work in IE but not in Firefox and Safari? http://www.jasonkieck.com/
Any help would be appreciated

The main reason is you have a <div id="bg_grid"> at the end of your html that is essentially over the top of everything else on your page, including your links. All clicks go to that <div> rather than your links undeneath it. I'm kind of surprised it works in IE to be honest.
You do also have a ton of errors as Gramps points out, but that particular issue is not technically an error, so I have a feeling you could fix the ~100 problems shown by the validator and still have the issue.
You could use z-index to "order the stack" as it were. Changing the z-index attributes for the css of those elements will allow you to change their order, regardless of their location in the html. A higher z-index number, the "closer" it is to the viewer (higher on the stack).
Right now, they are both set to 1, so the one that comes later in the html is on top.
Adding z-index:999 to the menu <div> should do it,

865 - Remote works in HiFi but not w/ Media Center III. Girder??

Similar Messages

Maybe you are looking for