875P FIS2R, Dynamic OC and CMOS updates

Has anybody noticed that their CMOS settings are getting changed "on their own"?  Like many others I'm having issues with my new MB.  One of the things that I've noticed is that after making a CMOS update and saving it, some of the changes stick and others don't.  A setting that typically get's reverted back is the FSB speed.  Having set it to 201Mhz or 205Mhz I find it being reset back to 200Mhz.  My speculation is that the bios is determining that there is a problem and resetting the value.  So, what if the code that does the dynamic OC also writes its updated values back into CMOS?  That would explain my issue and many other people's as well.  Especially if in other people's cases the Dynamic OC is setting the values to things that plain just don't work.
What do you think?

try setting memory timing to manual NOT SPD. and memory divider to DDR333.

Similar Messages

  • Employee Search in Dynamic Navigation does not update other iViews (FPM)

    Hi all,
    after selecting a person from Employee Search (MSS) we have to display corresponding data in a customer specific iView with help of selected person number.
    So I created a Floorplan Manager Application as described in https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/how-toaddacustomWebDynproiViewtotheMSSEmployeeProfile%28ECC+6.0%29&
    If I use the SAP content page or create my own pages with corresponding Employee Search and customer specific iView, updating of data on the customer specific iView works. But if I add the Employee Search to Dynamic Navigation, the data is not updated in the customer specific iView.
    I didn´t find a solution in this forum. Does anybody know, if it is possible to add the Employee Search as Dynamic Navigation (with help of Floorplan Manager functionality) and update data in other iViews and how this works? Or is it possible to handle this in a different way, e.g. PortalEventing?
    Thanks,
    Thomas

    Hi,
    I also tried to use only iViews of 'General Information'  and added the employee search (team viewer) of the sap
    content page 'General Information' to the dynamic navigation, but the other SAP standard iViews of 'General Information' page are not updated, too.
    Does anybody know, if it is possible to add the employee search to dynamic navigation and to update the other iViews of 'General Information'? If yes, what properties have to be set? Are some settings for Floorplan Manager
    needed?
    Could anybody please give me a hint?
    Thanks,
    Thomas

  • How can I use wget, cron and Automator to periodically pull a dynamic image from a URL to local storage, and then update a Keynote slide with that image, automatically?

    How can I use wget, cron and Automator to periodically pull an image from a URL (which is dynamically updated - like a weather map, say - to local storage, and then update a Keynote slide with that image, automatically?

    Any particular reason for those specific technologies?  wget does not exist on a mac, although you can nstall it I guess.  OS X has curl installed which should do pretty much anything you want to do with wget.  cron is being replaced by launchd, although cron still exists on mountain lion.
    As far as I can tell from automator all the standard 'actions' to access keynote  available to it require keynote to be open and running, but does not provide a function to actually open it.  So I think you will have to write some applescript, as a minimum to open and quit keynote. I notice that the keynote actions are mostly circa 2005 an wonder if they would even work.
    Under utilities in automator 'actions' there is a capability to add applescripts as part of the workflow.
    Also, note that cron is being dprecated by Apple and replaced by launchd.  that said cron is stil on my mountain lion instalation.
    This entry at stackoverflow shows use of cron with curl to get web urls.  http://stackoverflow.com/questions/1683620/getting-started-with-cronjobs-on-a-ma c
    If I have any time I may try and get this to work as it is quite interesting and new to me.  But otherwise, good luck.

  • Conflict between Client object model and Item Updated Event Receiver in sharepoint 2010

    Hello All,
    As per my requirement I have a two custom list.
    Agent Details
    Port Name
    Agent Details contains Agent code, Port Name,  email, address and phone of Agent. Its possible that one Agent Code is connected with multiple Port Name.
    Basically what I am doing is I am getting port name connected with Agent code, using jquery and bind those values with check box(using javascript created dynamically) and bind all with Div tag.
    Now when my custom edit form of Agent list open up it shows me different port name binding with checkbox group.
    when user select the check box and click confirm button my clicent object model script will run and add this selected value into Port Name list. 
    After confirm one more button named Save will enable asking user to edit the email, phone or address value and when I click on save my Item updated event fires which update the values of the selected port name(These port name I am getting from port
    name list) to Agent Details custom list.
    Now when I am trying to update the values my event receiver fires or some times it got stuck(not firing). So could you please help me the possible alternative for this requirements.
    Can we user the Ecma Script(Client object model to preserve the value of selectec port) and Item updated event receiver on the same time?
    Is anything am doing wrong then please guide me.

    Hi,
    As I understand, when you updated values in the agent details list the Item updated event receiver got stuck sometimes.
    The item update event receiver will fire after the item has been saved, and the client object model script or the Ecma Script runs before the item is saved, so there is no conflict between the client object model script and item update event receiver.
    You could find out the reason about the item update event receiver gets stuck by debugging the event receiver.
    When you want to debug your event receivers, you have to attach to OWSTIMER.EXE and wait till they are executed. You can control this behavior using the Synchronization attribute. Also, if you’re looking for an easy way to debug an event receiver without
    having to manually attach a debugger to your code, you can use the System.Diagnostics.Debugger.Launch() method.
    The articles below are about how to debug in the event receiver in SharePoint 2010.
    http://sharepoint-kings.blogspot.jp/2013/02/debugging-event-receivers-in-sharepoint.html
    http://chakkaradeep.com/index.php/event-receivers-in-sharepoint-2010/
    http://sharesaint.com/?p=77
    Best regards,
    Sara Fan
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Problem in tabular form based on dynamic view and pagination

    Hi All,
    I have a manual tabular form based on a dynamic view. The view fetches the records based on search criteria given by the user in all cases. But this view fetches ALL records when user clicks on pagination, without considering the search criteria. This is the problem I am facing.
    I am doing the following:
    Since tabular form does not support pl/sql function returning query, I cannot use a table directly. I need my results based on search criteria selected by user. Hence I created a dynamic view and used a "INSTEAD OF UPDATE" trigger to update the table.
    I use a set bind variables procedure, on load before header for setting the variables.
    This view fetches the correct data based on user search always. It creates a problem only in one situation, when using pagination in the report.
    The example can be found at:
    http://apex.oracle.com/pls/otn/f?p=19399:1:
    username = [email protected]
    pwd = kishore
    Here if "manager name" is entered as test, we get 5 records in "Summary of requests" report and 5 records in "Inactive Requests" report. When user clicks on Pagination in any of the reports, ALL the 7 records get fetched in "Summary of Requests" and 6 records in "Inactive Requests". How can I overcome this problem?? The report must consider the search variables even when pagination occurs.
    Is this because, the inbuilt "html_PPR_Report_Page" executes the region query once again by considering all search variables as NULL?
    Backend Code is at:
    http://apex.oracle.com/pls/otn/
    workspace: sekhar.nooney
    Username :[email protected]
    pwd: kishore
    application id = 19399
    My region code is something like:
    select *
    from regadm_request_v
    where access_type = :F110_REGADM
    and status <> 'INACTIVE'
    order by request_id
    My view code is:
    CREATE OR REPLACE VIEW REGADM_REQUEST_V
    AS
    SELECT *
    FROM REGREGOWNER.REGADM_REQUEST
    WHERE upper(employee_name) LIKE '%'||nvl(upper(REGADM_REQUEST_PKG.GET_EMPLOYEE_NAME),'%')||'%'
    AND upper(manager_name) LIKE '%'||nvl(upper(REGADM_REQUEST_PKG.GET_MANAGER_NAME),'%')||'%'
    AND upper(employee_sunetid) LIKE '%'||nvl(upper(REGADM_REQUEST_PKG.GET_EMPLOYEE_SUNET_ID),'%')||'%'
    AND upper(manager_sunetid) LIKE '%'||nvl(upper(REGADM_REQUEST_PKG.GET_MANAGER_SUNET_ID),'%')||'%'
    AND upper(request_date) LIKE '%'||nvl(upper(REGADM_REQUEST_PKG.GET_REQUEST_DATE),'%')||'%'
    AND upper(USAGE_AGREEMENT_RECVD) LIKE '%'||nvl(upper(DECODE(REGADM_REQUEST_PKG.GET_USAGE_AGREMNT_RECVD,'~!@',NULL,REGADM_REQUEST_PKG.GET_USAGE_AGREMNT_RECVD)),'%')||'%'
    AND upper(STATUS) LIKE '%'||nvl(upper(DECODE(REGADM_REQUEST_PKG.GET_STATUS,'~!@',NULL,REGADM_REQUEST_PKG.GET_STATUS)),'%')||'%'
    AND upper(REQUEST_APPROVED) LIKE '%'||nvl(upper(DECODE(REGADM_REQUEST_PKG.GET_REQUEST_APPROVED,'~!@',NULL,REGADM_REQUEST_PKG.GET_REQUEST_APPROVED)),'%')||'%'
    AND upper(nvl(APPROVAL_DATE,sysdate)) LIKE '%'||nvl(upper(REGADM_REQUEST_PKG.GET_APPROVED_DATE),'%')||'%'
    AND upper(APRVL_REQUEST_SENT) LIKE '%'||nvl(upper(DECODE(REGADM_REQUEST_PKG.GET_EMAIL_APPROVERS,'~!@',NULL,REGADM_REQUEST_PKG.GET_EMAIL_APPROVERS)),'%')||'%'
    AND upper(NOTIFY_APPROVED) LIKE '%'||nvl(upper(DECODE(REGADM_REQUEST_PKG.GET_APPROVAL_NOTIFICATION,'~!@',NULL,REGADM_REQUEST_PKG.GET_APPROVAL_NOTIFICATION)),'%')||'%'
    I would be glad for any suggestions.
    Andy/Varad any ideas? You both helped me a lot on my problems for the same application that I had faced before in More Problems in Tabular form - Please give me suggestions.
    Thanks,
    Sumana

    Hi Andy,
    The view and the package for setting bind variables work properly in my entire application other than the pagination. A pity that I came across this only now :(
    I have used this same method for holding variables in another application before, where I needed to print to PDF. I used this approach in the other application because my queries were not within the APEX character limit specified for the "SQL Query of Report Query shared component".
    In this application, I initially had to fetch values from 2 tables and update the 2 tables. Updateable form works only with one table right? Hence I had created a view. Later the design got changed to include search and instead of changing the application design I just changed the view then. Still later, my clients merged the 2 tables. Once again I had just changed my view.
    Now, I wanted to know if any method was available for the pagination issue (using the view itself). Hence I posted this.
    But as you suggested, I think it is better to change the page design quickly (as it would be much easier).
    If I change the region query to use the table and the APEX bind parameters in the where clause as:
    SELECT *
    FROM REGADM_REQUEST
    WHERE upper(employee_name) LIKE '%'||nvl(upper(:P1_EMPLOYEE_NAME),'%')||'%' .....
    I also changed the ApplyMRU to refer to the table.
    Here the pagination issue is resolved. But here the "last Update By" and "Last Update Date" columns do not get updated with "SYSDATE" and "v(APP_USER)" values, when update takes place. Even if I make the columns as readonly text field, I am not sure how I can ensure that SYSDATE and v('APP_uSER') can be passed to the columns. Any way I can ensure this? Please have a look at the issue here: http://apex.oracle.com/pls/otn/f?p=19399:1:
    I have currently resolved the "last update" column issue by modifying my view as:
    CREATE OR REPLACE VIEW REGADM_REQUEST_V
    AS
    SELECT *
    FROM REGADM_REQUEST
    I modified my region query to use APEX bind parameters itself as:
    SELECT *
    FROM REGADM_REQUEST_V
    WHERE upper(employee_name) LIKE '%'||nvl(upper(:P1_EMPLOYEE_NAME),'%')||'%' .....
    And I use the "INSTEAD OF UPDATE" trigger that I had initially written for update. The code is:
    CREATE OR REPLACE TRIGGER REGADM_REQUEST_UPD_TRG
    INSTEAD OF UPDATE
    ON REGADM_REQUEST_V
    REFERENCING NEW AS NEW OLD AS OLD
    FOR EACH ROW
    BEGIN
    UPDATE REGREGOWNER.REGADM_REQUEST
    SET MANAGER_EMAIL = :NEW.MANAGER_EMAIL
    , EMPLOYEE_EMAIL = :NEW.EMPLOYEE_EMAIL
    , STATUS_UPDATE_DATETIME = SYSDATE
    , USER_UPDATE_ID = (SELECT v('APP_USER') FROM DUAL)
    WHERE REQUEST_ID = :OLD.REQUEST_ID;
    END;
    Please let me know how I can resolve the "last update" column issue using the table itself. (Just for my learning)
    Thanks,
    Sumana

  • Unable to install Intel Dynamic Platform and Thermal Framework on Yoga 13

    I recently purchased a Yoga 13. I just got Windows 8 Enterprise installed on there. I am unable to install Intel Dynamic and Thermal Framework. I downloaded this directly from Lenovo Support (the file is labeled "Dynamic Platform and Thermal Framework for Microsoft Windows 8 (64-bit) - IdeaPad Yoga 13").
    During installation, the service agreement is in another language (Chinese, perhaps). When the installer starts running, I immediately get an error:
    "The setup program failed to install one or more device drivers. Setup will exit."
    And that's it. What do I have to do to get this to install? Am I downloading the right version? I don't see another version to download anywhere. I tried finding the software on Intel, but I was unable to. When using Intel® Driver Update Utility, it recognizes hardware that needs drivers, but it does not give me the Dynamic Platform download.
    Any help is appreciated.

    Sorry, I don't think this will help, but...
    I have been investigating why my Yoga-13 might be freezing up (about once every other day). While looking at errors in the event log, I came across errors that led to the following sites when I googled the error:
    http://en.community.dell.com/support-forums/laptop/f/3518/p/19481625/20262664.aspx
    http://forum.notebookreview.com/dell-xps-studio-xps/650572-new-dell-xps-l521x-ivy-bridge-536.html#po...
    Probably not any help.
    If you do get it installed and you experience your yoga freezing up (no response to any input), please post here.

  • How do I add a time field to a dynamic list and form?

    I'm trying to create an update form that logs when an action was taken. Among the fields are one for the date and one for the time, but I've not been able to get the time field to display or enter data correctly.
    I've set the time format in the ADDT preferences (database date and time format is yyyy-mm-dd and HH:mm:ss and screen format is dd/mm/yyyy and HH:mm). When I create the list or the form using the wizard, there is no option to display the field as a time.
    In step 3 of 4 in the Dynamic List Wizard, the 'Display as' options are: text, numeric, double and date. Choosing date for the time field gives me a display as though it was a date (I get '00/00/0000'). I have the same problem with generating a Dynamic Form in that there is no option to display a time, only a date.
    Am I able to do this using the wizard, or is there another way that I'm, missing? Thanks for any help.

    If those date/time fields are only needed for logging purposes then follow Günter's instructions.
    If you need to be able to edit those two fields and have their values displayed properly then there are several steps you should take.
    First open the page that uses the Dynamic List behavior and make sure that all date and time fields are configured to display as dates. Then open the page with the dynamic form and click on "Manage Dynamic Form Wizard" in the Developer Toolbox. Configure your date and time fields to submit as dates. Then go to the Server Behaviors panel and double click on "Validate Form". You should now have 3 date/time options available under Validation Format: Date, Datetime, and Time. Configure each field as needed.
    This will ensure that date and time fields are saved in the proper format so that when you view their values they will be displayed properly, that is dates will be displayed as dates and times as times.
    There are also several additional server formats available that are accessible through the Bindings panel that you might want to experiment with.

  • XML PARASE and insert /update in corresponding tables

    Hi,
    I have a XML in which master details tables 3 tables.I want to separate element and insert/update in corresponding tables dynamically.
    Table invlovled in A,B,C
    Thanks
    Reena

    Reena
    The easiest way to do this is along the following lines..
    (1) register an XML Schema that describes the XML you wish to process with theh database.
    (2). create a relational view for the top level elements and for each repeating element (element where maxOccurs > 1 in the XML Schema)
    (3) Use 'insert as select' or other SQL type processing to update your relational tables from the contents of the view
    It is normally recommended that you add the following annotations to the XML Schema before registering it with the database
    (1) At the schema level set xdb:storeVarrayAsTable="true".
    (2) At the complexType level set xdb:maintainDOM="fasle".
    If you search the forum you will find a lot of examples of creating relational views of XML content stored in the XML database. Typically these examples will include key words like 'create or replace view' and 'table(xmlsequence(extract' or 'xmltable'.
    Hope this helps...
    -Mark

  • Dynamic actions and PA-PD integration a problem

    Are you aware of an update problem with MSS and PA-PD integration?  This information was made available in a presentation to us last year.  Was this issue resolved in mySAP ERP 2004?
    Dynamic actions and PA-PD integration a problem
    Dynamic actions and PA-PD integration are not
    processed on updates made from the web (but in the
    background through a batch or call transaction session)
    That’s why most standard PCRs require HR to process
    the transaction using the SAP GUI in the foreground
    This normally affects changes to infotypes 0000 &
    0001
    Then the next slide states:
    Workaround for dynamic actions
    Review dynamic actions in table T588Z (use SE16 to
    display) and document the infotypes and values that
    trigger dynamic actions
    Incorporate those infotypes into your background
    processing and web forms (if necessary)
    Workaround for PA-PD integration
    Include the integration steps for these infotypes in your
    background processing (just as in conversions)

    Hi John,
    Not sure if it is fixed.. or can be fixed.. we are still in 47  & Use custom code to account for Dynamic Actions.. the PCR processes use the function module HR_MAINTAIN_MASTERDATA to update the infotypes. This function mimics a BDC & hence cannot handle Dynamic Actions... Basically, the issue is not with MSS but it is the way Dynamic Actions work.. to quote SAP  "Dynamic actions are not correctly processed in batch input sessions since in batch input the sequence of the screens needs to be predefined correctly. To be able to process dynamic actions in batch input, the checks of the dynamic actions need to be programmed when creating the batch input session. To avoid errors when programming and running the session, the static actions  only are processed in batch input. Calls of infotypes that are triggered by dynamic actions should be realized by separate Transaction calls.
    Please take a look at OSS Note #386027 for additional info about Dynamic Actions.
    Regards,
    Suresh Datti

  • To get the input values from the dynamic tables and save in the SAPdatabase

    HI EXPERTS,
    I AM NEW TO WEB DYNPRO ABAP. MY QUERY IS HOW TO GET THE VALUES THE USER ENTERS IN THE DYNAMIC TABLE AND SAVE THE SAME IN THE SAP DATABASE. I HAVE CREATED THE TABLES BUTTON EVERYTHING BUT I DONT KNOW THE CODE HOW TO DO. PLEASE HELP ME OUT.

    >
    vadiv_maha wrote:
    > HI EXPERTS,
    >
    > I AM NEW TO WEB DYNPRO ABAP. MY QUERY IS HOW TO GET THE VALUES THE USER ENTERS IN THE DYNAMIC TABLE AND SAVE THE SAME IN THE SAP DATABASE. I HAVE CREATED THE TABLES BUTTON EVERYTHING BUT I DONT KNOW THE CODE HOW TO DO. PLEASE HELP ME OUT.
    hi,
    1 there is one property OnAction of the button...
    2 So, in this event handler,you have to read the context node to which ur table is binded
    3 use the code wizard
    control+f7
    , and use the method
    get_static_attribute_table
    4 now u have got the vaues in internal table,so now as pointed in the previous reply, you can use the
    Update
    or
    Modify
    statement...
    regards,
    Amit

  • Dynamic text and embedded font

    Hi,
    I'm new to Flash and AS3, and I'm having a problem when I do
    the following: I create an empty dynamic text field in the
    authoring environment, click "Embed...", and choose the character
    sets that I want (I get the same results when I embed the entire
    font). The first time I change the contents of the text field with
    the command:
    text_field.text = "string 1";
    I get good results--the text appears in the correct font.
    However, subsequent attempts to update the .text property fail with
    no error message, and the field becomes blank.
    If I remove the embedded font by clicking "Don't embed" in
    the embedding dialog, then every time I update the field's .text
    property, it displays correctly using a local machine font.
    I've also tried embedding the font in the swf by creating a
    dynamic text field in the authoring environment, into which I place
    no text, creating a second, functional text field in actionscript,
    formatting it, using the "embed = true" property, and repeatedly
    updating the .text property with the same bad results as described
    above.
    I haven't tried using the [embed] metatag to dynamically load
    the font.
    I've tested the swf in IE7 and Firefox on two machines with
    the same results. What am I doing wrong?
    Thanks,
    Dave

    Okay, here's more information. The font that I've been trying
    to embed is Bitstream Vera Sans Mono. If I embed a different font,
    like Bitstream Vera Sans, I have no problem. It seems to me that it
    must be that my Bitstream Vera Sans Mono is corrupted, my .fla and
    .swf files are corrupted, or there's a bug in flash...

  • Should I use dynamic SQL for simple updates?

    Please tell me, out of the two options given below, which option should i use to update columns in a table and why?
    what will be the performance difference between the two approaches?
    Please note: The options given below is just for an example
    procedure proc1(var1 varchar2)
    is
    begin
    update tab1 set col1 = var1;
    commit;
    end;
    procedure proc1(var1 varchar2)
    is
    sqlstr varchar2(1000);
    begin
    sqlstr := 'update tab1 set col1 = :v1';
    execute immediate sqlstr using var1;
    commit;
    end;
    Thanks
    Arun

    Arun G Nath wrote:.
    Should I use dynamic SQL for simple updates? No way, not a chance.
    Performance is not the issue (as long as you are using bind variables).
    But with dynamic SQL, you loose compile time checking; you do not know until runtime if the SQL is valid.
    You also loose the dependency between proc1 and tab1, which can be found only if you search user_source.
    (And in either case, you probably want to remove the commit)
    Regards
    Peter

  • Annoying update messages and forced updates

    Dear Skype,
    I have been using your application for more than a decade now, and today I decided to untick the box "Start Skype at computer startup". I don't delete skype for now, but I am close to permanently remove it.
    I have had it with your annoying forced updates.
    So long

    Hi, Kormendi_adam.
    I'm sorry to see your intent to leave Skype. 
    Skype dynamically updates to better the Skype network and some updates include a major change that require you to update. This could be anything from a major compatibility change or even a critical bug patch. 9 out of 10, the intent of the Skype development team isn't to push out a new flashy design to be forced into your acceptance, but rather to make improvements that the majority of the userbase would benefit from. 
    That's not to say that you will and must enjoy it. That's why we have the Skype community. I'm glad you put your opinion out there. I'm really sorry that you cannot use an older version of the Skype client. I do hope that you will take the time to learn, use and enjoy the latest version of Skype. It has made great strides over time and has become quite the choice in Internet communications and it would be greatly missing a piece if you left. 
    And please, if you have any question about Skype or have any bright ideas, please don't hesitate to post them on the Skype community. We're here to help!
    P.S.: Did you disable Automatic Updates as an Administrator? You mentioned before that you disabled startup upon login only. 
    I.T. Professional
    Virtualisation Solutions (VCA-DCV - VMware)
    Donating time to help you here with your Skype needs.
    If I've answered your question, feel free to "Kudo" me!

  • MSI KT6 Delta and Auto update page problem

    Hi, I have been lookin for the right forum to post this on for awhile heh but I have an MSI KT6 Delta FIS2R which has an auto update feature that uses an icon on ur desktop called MSI Live Update. This utility has been working for quite some time now but all of a sudden i get an error message in quote
    "Microsoft JET Database Engine error '80040e09'
    Cannot update. Database or object is read-only.
    /autobios/VerChk/XSeries.asp, line 105"
    I have been on a few sites including microsofts to try and figure out the problem but i get nothing concrete or at least anything i can understand, so I hope someone out here does and if so please help me! thank u

    okay well I did that but does not seem to be working... also after just reading FAQ i noticed that the live update service is being updated which coul dbe causing the problem as well, but i dont know how accurate the date is on that I mean it is a FAQ. So.. is anyone else with this board having the same problem right now?

  • 875p FIS2R Memory Question

    I just bought the 875P FIS2R board, but haven't powered it up yet since I still haven't received the memory. I also got the P4 2.4 GHz 800 FSB CPU. The MSI web site directed me the the Kingston memory site that recommeneded the KVR400 series DDR memory with a CAS latency of 3, so that's what I bought. I noticed in the manual that the only settings for CL are 2, 2.5, and auto detect from the stick's NVM. My question is, will I be able to use this memory running with a FSB of 800 and a CL of 3? Will auto-detect actually adjust the CL to 3, or are the only options 2 or 2.5? I know I will take a performance hit, but I'm not concerned about that right now.

    Djfuzz,
    CAS Latency of 3 is settable in Manual Timings when Perfomance Mode is set to Slow (or via your obscure method!!!), but if you then boot Windows and check timings (with something like CPU-Z) you will see it is actually 2.5!!!!!
    dRfELL,
    Let's bloody well hope they fix it in a future BIOS release, 'cos my memory is rated at 500 MHz and cost over £500 ($800) and I can't even use it past 460 MHz because of this!!!
    But in reality, we're already on BIOS rev. 1.9 and from what I can gather, it's been a known problem for quite some time - so don't hold your breath!!!    

Maybe you are looking for