Employee Search in Dynamic Navigation does not update other iViews (FPM)

Hi all,
after selecting a person from Employee Search (MSS) we have to display corresponding data in a customer specific iView with help of selected person number.
So I created a Floorplan Manager Application as described in https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/how-toaddacustomWebDynproiViewtotheMSSEmployeeProfile%28ECC+6.0%29&
If I use the SAP content page or create my own pages with corresponding Employee Search and customer specific iView, updating of data on the customer specific iView works. But if I add the Employee Search to Dynamic Navigation, the data is not updated in the customer specific iView.
I didn´t find a solution in this forum. Does anybody know, if it is possible to add the Employee Search as Dynamic Navigation (with help of Floorplan Manager functionality) and update data in other iViews and how this works? Or is it possible to handle this in a different way, e.g. PortalEventing?
Thanks,
Thomas

Hi,
I also tried to use only iViews of 'General Information' and added the employee search (team viewer) of the sap
content page 'General Information' to the dynamic navigation, but the other SAP standard iViews of 'General Information' page are not updated, too.
Does anybody know, if it is possible to add the employee search to dynamic navigation and to update the other iViews of 'General Information'? If yes, what properties have to be set? Are some settings for Floorplan Manager
needed?
Could anybody please give me a hint?
Thanks,
Thomas

Similar Messages

Sale Quotation Formatted Search displays correctly but does not update OQUT

I have a formatted search, intended to show a deposit amount of 50% for the document total, and refresh whenever the doc total changes. It displays correctly on the Quote header screen UDF area, but OQUT does not update. Pressing Shift-F2 returns 'internal error'. The first time the Quote is entered the right value gets in OQUT, but never gets updated after that.
The UDF is OQUT.U_Deposit. The formatted search query is:
Select ($[$33.88.number]*.05) and it is set to refresh reglaurly when Document Total changes.
Thanks for helping to figure this out

Which field are you referring by
$[$33.88.0]
The screen variable for
Document Total $[$29.0.Number]
Total Before Discount $[$22.0.Number]
Also I notice for 50% you have used .05 which is actually 5%
Try this query
SELECT ($[$-29.0.Number]*0.5)
The minus is needed since it is a UDF on the header which is a seperate window.

When I update template, it does not update other pages

I have created a template .dwt (XHTML) and have some .html pages. The problem is when I update the .dwt (XHTML) pages it does not update the other pages. I have tried everything but the other pages do not update. Could it be something to do with the folder files on the right which aren't selected properly? If so how do I update my source folder so that this will work?

Hi,
When you update a template, do you get dialog to update the other files? Launching those html files, do you see those related to your template?
Please also provide more information like which version of Dreamweaver are you using and on which platform?

BUG: 16.0.1 Updating linked export image size does not update other dimension

Hi
Either this is a bug or I'm missing something.
1. In AI CS6 16.0.1 (32-bit), click "Save for Web and Devices"
2. Make sure W & H are linked
3. Make a change to Image width
4. Tab through to Image height - this should update? But it doesn't.
5. Tab through to Percentage - height remains unchanged, but width is reset to original value.
I thought height should update when I did this.
Now try this:
1. Cancel out of Save for W&D and come back in, then repeat Step 1 above
2. Unlink and immediately relink width and height using the chain button
3. Update width
4. Tab through to height and hey presto, it updates now.
So Save for W&D is not picking up the fact that "Retains original image proportions is checked" when the dialog is launched.
Can anyone confirm this?
Cheers
Richard

OK, this is a known bug. We'll take care of it! Thanks
See forum post:
http://forums.adobe.com/message/4314172#4314172
Pattie

Before removing iPhoto (latest update crashed the app), I accidently removed it from my purchased Apps from the App Store. I accept iPhoto when I search for it, but does not put it back in my list. How do I get this back so that I can reinstall iPhoto?

Before removing iPhoto (latest update crashed the app), I accidently removed it from my purchased Apps from the App Store. I accept iPhoto when I search for it, but does not put it back in my list. How do I get this back so that I can reinstall iPhoto?
Thank you.

I found the answer just after posted this. Thanks to a user named CloudWalker. Solution is to go in AppStore, View Account under "Store" Menu and unhide any purchases.

Inbox Search - status for service request not updated

Hi,
In inbox search, the status change for a service request does not reflect until the user log offs or opens the service request in edit mode. PFB the steps followed. (Two users are monitoring the service request but is being processed only by one)
Web UI window 1(User 1): I open the inbox search result page. Service requests are displayed with the status field
Web UI window 2(User 2): In a separate window, the service request is approved by changing the status of the service request to Approved.
Web UI window 1(User 1): In the inbox result screen, i click on search for the same search criteria, but still the old status of the service request(updated in window 2) is displayed.
Observation:
1. If I open the service request, the service request still has the old status. If i click on edit, the new status is displayed. If i click on Back button (without clicking on edit), the new status is refelected for the service request in the inbox result page now.
2. If I log off and again open the inbox result, the new status of the service request is reflected.
3. The status of the service request is updated in the database immediately user 2 changes the status.
There is no enhancement done for the inbox search. The behavior is for standard inbox result.
Please provide any pointers to resolve this issue.
Regards,
Radhika
Edited by: Radhika Chuttani on Jan 5, 2011 7:13 AM

Radhika,
This is standard behavior in the SAP inbox. The reason is that SAP buffers search results in the Inbox in order to improve performance. So even though you hit "search" again, SAP does not update the search results because this search has already been executed in this session. Clicking "End" or logging off refreshes the buffer.
SAP released a note to update the "Responsible Employee" in the Inbox without requiring the user to log off. You can see their explanation and the solution here:
https://service.sap.com/sap/support/notes/1465966
If you want to enable inbox refresh every time a search is executed, you will probably have to do custom coding. My guess is that you may be able to leverage the CRM_IC_INBOX_BADI. Let me know if this much info is enough or if you want further details on how to technically achieve this.
Rahul

Search Item drop-down does not show any data for Advanced Search.

Hi,
I have a requirement to add a new criteria to the existing Advanced Search region of 'My Employee Information' in Manager Self Service responsibility. I substituted the AdvancedSearchVO to include the new column. Using personalization i did the below steps to show the new column in the page,
1) Created a 'Message Styled Text' item under Table Layout region to display the result. I associated the View Instance (AdvancedSearchVO1) and View Attribute (AttrColumn).
2) In Advanced Search Panel created a new CriteriaRow and set the 'Search Allowed' property to True.
3) In Advanced Search Mappings i tried to create the new mapping but the Search Item drop-down does not show any of the CriteriaRow item. But Results Item shows the 'Message Styled Text' item created in step 1 above.
Any idea what i would be missing becasue of which 'Search Item' property does not show any data?
I am using OAF version 12.1.1.
Thanks, Suresh

Hi,
I faced the same situation but i still waiting for the solution.. this is my problem's thread..
Addition of LOV Search Filter using Personalization
But when i tried to create a new custom page with advanced table and created a new LOV column via personalization. i was able to create new search mapping.. but this is not happening in the seeded page case :(.
I m also looking for solution...if any one can provide some inputs on it , will be highly appreciated.
Thanks
Renu

Multiclip editing does not update Canvas window with active angle

Hi,
I am trying to do some multiclip editing but for some reason when cutting between angles the canvas viewer does not update with the video. Once I stop playback the cuts are all created properly and the video changes when playing back again. However, when editing the video does not change to the active angle. The audio changes but the video does not.
I have the multiclip playback setting in RT enabled and the canvas and viewer windows synced and matching each other when playing back, and video + audio is set in the sync menu.
I'm now stuck! and would greatly appreciate some help.
Thanks
Phil

Welcome to the family.
I don't mean to brush you off because I understand your frustration. But what we know about mutliclip is that it really does work, if you follow the rules completely. We also know that most of the "multiclip doesn't work" posts are resolved by encouraging the user to be objective and to simply recheck the setup steps in the manual, one at a time. (Editorially speaking: There are too many of them, there are too many stupid gotchas in the multiclip setup. True. Hope springs eternal that FCP6 may fix many of these things. It should be a one-click solution.)
You can search for multiclip here and, after filtering out the nonsense from elitists like me, you should be able to detect something in your configuration that might be keeping you from getting the performance you are expecting.
bogiesan

Pthread_once() does not update __pthread_once_pad

Having a problem where pthread_once() gets called, but does not update the __pthread_once_pad[3] to show that the init routine was called for the associated pthread_once_t var.
The init routine gets called, and the resultant pthread_key_t variable can be used to call pthread_setspecific(), but a resultant pthread_getspecific() will fail. I can see in gdb that the __pthread_once_pad[3] value is unchanged.
This is happening on SOlaris 9 SPARC with gcc 3.3.2, and on Solaris 8 x86. The code works on Linux with an older gcc and also on Solaris 8 SPARC with an older gcc.
We can write our pthread_once() to increment the __pthread_once_pad[3] value and call the init function and it will work fine.
Any clues?

I don't have an installed seat of Pr + AE CS6 accessible at this time so I can't check it with those versions. I see no bug in CC 8.n though, so I tend to agree that it may be a bug specific to your local setup or some specific step we don't yet know about. In any case, I should clarify a couple of things to make sure we're all on the same page about how DL works with AE:
1. You're really just 'rendering' preview files to make playback a little better. You're not actually rendering anything from AE in PrPro to give you a standalone media file.
2. Due to the nature of item #1, there really isn't any architectural way you could actually break the Dynamic Link of any imported files by just building previews for them, because it's just referencing an additional cache file to improve playback.
3. If you make changes in AE to a rendered comp in Pr, then it will show red again in the sequence and you will need to re-render if you want that playback boost back. This is as designed.
4. If you want to truly render (aka flatten, or render and replace) an AEP in CS6, you need to export it as a standalone media file from AE and import that file into Pr.
5. It's possibly that DL itself is malfunctioning, in which case you may need to quit AE or Pr or both and maybe even re-import (via DL) the file agin.
6. It's good practice to browse to an AEP in the media browser, then import it from there using the Dynamic Link Import dialog. This is not required, but we've heard of cases where some import problems are avoided in this way. Also using the media browser to import in general is good because it previews folder dependent files in a better way.

I tried to update my nephew iphone 4 version 4.3.4 (8k2), I did back-up everything before attempting to update and the result when I click down-load and update, it does not update instead it says, itunes could not contact the iphone software update etc.

Hi to all,
I tried to update my nephew iphone 4 version 4.3.4 (8k2), I did back-up everything before attempting to update and the result when I click down-load and update, it does not update instead it says, itunes could not contact the iphone software update server because you are not connected to the internet. I did check my wire-less connections and the connection from my PC to wire-less is hundred percent okay. I did search using google.com to confirm and my connections is good. Is there any problem regardings my firewalls or any help will be appreciated. Thanks

Hi bosefire,
Thanks for visiting Apple Support Communities.
You can use the steps in this article to troubleshoot your iTunes connection:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Regards,
Jeremy

Name in profile does not update

Hi, I changed my name in my profile just to see what it would look like and then I changed it back, but it looks as though it does not update. I tried several times doing this and same results. I need my Skype name to how I save it on my profile.
Please assisst.
Thank you.
Maurice.

I understand what you're asking, however the PowerShell script doesn't fix the underlying sync issue. It only masks it by resolving it for that single time. You'd have to re-run it constantly to keep Site Collections updated.
If you run stsadm -o sync deleteolddatabases 0, you run that once and let the UPA -> SharePoint sync timer job complete. The UPA -> SharePoint sync incremental timer job will pick up after that and regularly keep the user's up-to-date.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Paged dataset does not update it's child dataset

My paged dataset works great, except on refreshing it's child
dataset, when sorting or navigating from page to page.
Clicking on the record in the paged dataset does return the
correct child dataset record. Clicking on any of the column headers
to sort the paged dataset or clicking on any of the page functions,
i.e. Next Page, Previous page, does not update the child dataset
record.
The first record of the paged dataset is set to 'selected',
after sort or page navigation function.
What am I missing?
Here is the code that updates the child dataset record:
onClick="pvPOrders.setCurrentRow('{ds_RowID}');"
Here is the sort:
onclick="dsPOrders.sort('PONUM','toggle');"
Here is the page navigation:
onclick="pvPOrders.nextPage();"
There are no observers. The code can be viewed here:
http://codeshare.ulatu.com/mare3184

Hi Doug,
You shouldn't have to do the manual setting of the
currentRow. The fact that your code snippet here:
http://codeshare.ulatu.com/mare3184
Has your PagedView data set pvPOrders depending on dsPOrders
means that when you set the current row on pvPOrders it just
forwards the set request on to dsPOrders.
I'm a bit confused by the other snippet you posted here:
http://codeshare.ulatu.com/marc0722
because I don't see any mention of a PagedView in that
snippet. In any case, I mocked up something that should be similar
to your situation, and it seems to work just fine:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml"
xmlns:spry="
http://ns.adobe.com/spry">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8" />
<title>Untitled Document</title>
<script src="includes/xpath.js"
type="text/javascript"></script>
<script src="includes/SpryData.js"
type="text/javascript"></script>
<script src="includes/SpryPagedView.js"
type="text/javascript"></script>
<script type="text/javascript">

</script>
<style type="text/css">

</style>
</head>
<body>
<input type="button" value="Prev"
onclick="pvStates.previousPage()" /><input type="button"
value="Next" onclick="pvStates.nextPage()" />
<p>Select a State:</p>
<div spry:region="pvStates dsStates">
<div>{pvStates::ds_PageNumber} of
{pvStates::ds_PageCount}</div>
<ul spry:repeatchildren="pvStates" spry:choose="">
<li spry:when="{pvStates::ds_RowID} ==
{dsStates::ds_CurrentRowID}" spry:setrow="pvStates"
spry:hover="hover" spry:select="select" spry:selected="">
{pvStates::name}
</li>
<li spry:default="" spry:setrow="pvStates"
spry:hover="hover" spry:select="select">
{pvStates::name}
</li>
</ul>
</div>
<p>Cities for the currently selected state:</p>
<div spry:region="dsCities"
spry:repeatchildren="dsCities">
{name}
</div>
</body>
</html>
--== Kin ==--

Bug report: text does not update on the stage

I am not sure whether this has been reported:
I have several groups divs into one main group div. In these are images and text. I create a new group by copying elements from a previous group and then insert new text in the copied text box. The text does not update on the stage but is correct when I run the composition and also in the text panel.

Hi Hemanth.
I tried all day and is intermittent, why?, 'cause the numbers are now showing but the other texts not, this happen only on Chrome and Safari when the navigator screen increases size.
On Chrome:
On Firefox:
I discovered that the error appears only on the right side of the stage, if I move the buttons to center, the error disappears:
On Chrome (Fullscreen):
I have no idea of what is happening.

Cinnamon launcher does not update on application install

Cinnamon launcher does not update on application install. For example, when I do:
pacman -S chromium
Then chromium installs but it does not appear in the cinnamon launcher (search does not work as well). It only appears after I logout and log in again.
Last edited by n3ziniuka5 (2015-06-02 19:16:44)

This happens to me sometimes but only when Firefox updates, what I do is press "Alt + F2" and type "restart". This will restart cinnamon without closing any of your windows that you had, NOTE that typing reboot will reboot your system like when you type in the command line so dont confuse the two.

Real time ROLAP or Automatic molap cubecube does not update the value

Hello Everyone,
I am working with Real time Rolap and Automatic MOLAP cube. I had created cube using AdventureWorks DW sample given by Microsoft Tutorial. when i fire insert query, It updates data. It works fine in both the cases after reconnecting in SSMS and SSAS browser.
But I have a one database table in SQL server with 4 varchar and 10 numeric fields [simple table with one primary key without any relationship with other table]. I tried to create both type of cube from direct database table [selecting varchar fields as
dimensions and numeric as measures], created partitions, specified server side tracking table. It processes the cube. but when i add rows into this table. It inserts record but does not update in SSAS browser or SSMS browser.
Please help me what is the problem???
Thanks in Advance!

I noticed the same behavior reported by Bob: Not regarding the "process filter" or the "update frequency" selected "CPU Time" column is only updated when details dialog is open. I noticed it just today (which triggered the search here), I wonder if this "feature" has been always present or maybe activity monitor is getting lazy?
Regards,
Mauro

Employee Search in Dynamic Navigation does not update other iViews (FPM)

Similar Messages

Maybe you are looking for