890fxa-gd65 black screen due to usb use ?

To discribe the problem in simple words: I noticed that my new build system stops working after approx. 20 minutes when I play a game (burnout city paradise) with my logitech gamepad, hence usb. Screen goes black, system is totally not responding to anything, but fans still run. I have to shut it down with the button on the psu. But after that I can restart my system right away. When I play any other game that doesn't involve a gamepad, the system tends to do the same black screen thing after 2 hours of playing, but only if I have usb stuff plugged in (printer, external hdd's and a card reader). Again, hence usb. As soon as I unplug everything, exept for the mouse and keyboard, it seems that I can play without end, but sometimes the black screen thing still occurs. I have been reading similar post on this problem in this forum, and on the internet, and tried the sollutions suggested, (in the bios,ver 18.3, cell menu, changing timing from 1t to 2t, switching from unganged to ganged mode) but that didn't help.
This is my setup:
890fxa-gd65 mb with bios version 18.3
AMD X4 II 965 AM3 Black [email protected] Mhz
Geil 8 gig DDR3 Value Plus pc1333 Dual channel memory kit (2x4gig)
MSI R6850 Cyclone Graphics Card.
Samsung HD, 1 TB, HD103SJ F3
Club 3D psu, 1000w
Windows 7 ultimate, 64bit.
If I should place screen shots of CPU-Z here, let me know. But i hope someone can help me, because I'm running out of options. I don't want to RMA this board just jet.

Quote from: Svet on 24-August-11, 03:37:44
do you use windows 7 chipset drivers?
or msi chipset drivers? ==> http://www.msi.com/product/mb/890FXA-GD65.html#/?div=Driver&os=Win7%2064
also do you have SP1 installed?
I use the msi chipset drivers, and SP1 is installed.
But something weird just happened. I just tried to play a game with "Battlefield Bad Company 2", single player. It took a while trying to load the level, and then, all of a sudden the screen went black and the whole system was not responding. Had to shut it down with the power button on the PSU. And could restart immidiatly after that. And I mean Windows. Not the game....... I'm puzzeled What I can do is that I try to do the same thing, play a single player game with BFBC 2, and see what happens......
Edit:
As I wrote, I went back to the game. Now it had no trouble loading the level. And I could play. I didn't play it for an extended period of time. Just to see if it works. And as I said, it did. This is becoming a weird puzzle.

Similar Messages

7th gen Pod nano black screen due to a little sweat, need fixed

Need a fix for 7th gen ipod nano that went dead, black screen, due to little sweat ? These units are supposed to be decent enough for some activity. No one in Cancun Mexico will fix it for me , I went to apple store in Cancun and they said they won't do anything for me. Not impressed with this product, far to sensitive.

Hi shannons923,
Thanks for using Apple Support Communities. This article has some steps that may help, and additional information if the issue persists:
iPod won't turn on
http://support.apple.com/kb/ts1383
Although the image is for an iPod classic, the steps also apply to your iPod nano (7th generation).
Cheers,
- Ari

Whenever I export my interactive indesign file to swf the videos won't play in the resulting html file, it's just a black screen. I'm using .mp4 videos as well.

Whenever I export my interactive indesign file to swf the videos won't play in the resulting html file, it's just a black screen. I'm using .mp4 videos as well.
Does anyone know what may be causing this problem?
Thank you

Unless you held down the Command key when dragging the iPhoto Library package to the flash drive you only copied the library. How is the flash drive formatted? If it was not OS X Extended (journaled) the integrity of the library's internal structure was probably compromised.
If you don't have a current backup of your library do the following:
1 - launch iPhoto with the Command+Option keys held down to open the First Aid window. Be sure to follow the circled recommendation in the screenshot.
2 - run Option #4, Rebuild Database.

GD65: black screen after 4.4ghz with i5 2500k

Hi, I have a problem with my MSI P67A GD65. My cpu is an i5 2500k. I tried to overclock it but if I go over 4.4ghz, despite very high vcore (1.39) does not start windows. The strange thing is that it don't go in BSOD, but the screen stays black or windows crashes a few seconds after the start of the boot process. They said me on an Italian forum (I'm Italian) which is strange, with that vcore windows should start or at least should give me BSOD, no black screen. Can you help me? Thanyou very much
CPU Intel i5 2500k 3.3ghz @ 4.4ghz
Motherboard model MSI P67A GD65 Bios v. 1.70
Memory G.Skill Ripjaws-X 2x2gb 1600mhz cl7 1.5v
Video card Radeon HD 6850 1gb gddr5
Hard drive(s) Samsung Spinpoint F3 7200rpm 16mb
Western Digital Caviar Green 5200rpm 32mb
Any other peripheral cards and devices
Operating system and version Windows 7 Ultimate 64 bit
Power Supply Unit brand and output in watts and DC output (amps) Corsair TX 650w

I would start with updating your BIOS to the latest BETA BIOS Version (v1.8b11) which can be found here: https://forum-en.msi.com/index.php?topic=144655.msg1081923#msg1081923
Set all clock settings back to default before attempting a BIOS Update. >>Use the MSI HQ Forum USB flasher<<
Then retest with the latest version.
Quote
The strange thing is that it don't go in BSOD, but the screen stays black or windows crashes a few seconds after the start of the boot process. They said me on an Italian forum (I'm Italian) which is strange, with that vcore windows should start or at least should give me BSOD, no black screen.
Sorry, but that is basically nonsense. When the overclock settings are unstable, all kind of things can potentially happen: BSODs, freezes, black screen, reboots etc. There is no rule that when a certain VCore is applied the only "right" response would be a BSOD.

MOVED: GD65: black screen after 4.4ghz with i5 2500k

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=145776.0

I would start with updating your BIOS to the latest BETA BIOS Version (v1.8b11) which can be found here: https://forum-en.msi.com/index.php?topic=144655.msg1081923#msg1081923
Set all clock settings back to default before attempting a BIOS Update. >>Use the MSI HQ Forum USB flasher<<
Then retest with the latest version.
Quote
The strange thing is that it don't go in BSOD, but the screen stays black or windows crashes a few seconds after the start of the boot process. They said me on an Italian forum (I'm Italian) which is strange, with that vcore windows should start or at least should give me BSOD, no black screen.
Sorry, but that is basically nonsense. When the overclock settings are unstable, all kind of things can potentially happen: BSODs, freezes, black screen, reboots etc. There is no rule that when a certain VCore is applied the only "right" response would be a BSOD.

Using Yosemite - cannot project screen onto TV. Get bits and pieces or black screen. Have been using same setup for years.

Using Yosemite - cannot project PC screen onto TV. Can get a black screen or bits and pieces of a screen ( not always the one displayed on PC). Have been using same setup for years.
Thanks for any help

Hi, edward.
Thank you for visiting Apple Support Communities.
I understand that you are having a display issue with your MacBook Pro on your TV. I would need a little more information regarding how you are connecting your device and what content is being displayed to provide a better answer. However, here is the best troubleshooting resource to go through when experiencing these symptoms.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT201177
Cheers,
Jason H.

Black screen, that says USB set up error

Any help please .
When I started up my old 10.3 computer this morning , I have got a black screen that says down the side USB setup error 5c0000008004 , down the side,
then invalid memory access
Welcome to open Fireware, then the date.4to continue booting up type "mac-boot"
and press return.
Problem the keyboard wont allow me to type the dash symbol(always been able to before).
Have closed down and restarted the computer a few times but no luck , always the same ..........
Any help , please from geniuses out there .
Thank you
M . from a rainy Barcelona

martin:
Sounds like you may have a bad RAM module. Download and run Rember-Memory Test and post back with results.
cornelius

Black screen on Media Player using jmf

I am using code to tranmit video using RTP using JMF and i am able to successfully get the video on client side
Code to send the video over rtp
http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/AVTransmit2.java
code to recieve video over rtp
http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/AVReceive.html#source
My problem is i am not able to play video in AVTransmit2.java.
If i create a player using datasouce, eigther i get player already occupied or a black screen.
please help me running the video on Transmit side as well.

i have same problem. works fine booting back up to Snow Leopard, but it's a drag to get windows to work. you can also chose to boot to last known working configuration in lieu of system restore, but it's still cumbersome.

890FXA-GD70 black screen on boot

Hello everyone,
I updated my bios from 1.D to 1.14 as suggest by the MSI Live Update tool. I am now encountering a situation where i have no video output until windows is loaded. I can hear the POST beep etc but i have no video during the entire boot.
I have unplugged and verified that all my video cards (Quad ATI Radeon 5800's) do indeed work. I have not tried pulling three of the cards out and seeing how it behaves on just one card. Might try that in a bit after i get some ideas.
Anyone run into this issue? if so, any ideas on how to remedy this?
OS: Win 7 x64
Video: Quad 5800's
HDD: WD Green 1TB
CPU: AMD FX 8150
Memory: Corsair Vengeance Blue PC3-12800
Edit: Not sure if its possibly related but also worth noting is that since this bios update my USB 3.0 slots no longer function either.

STU,
I am also having problems with the same BIOS Version on that board and the FX 8150. Everything was running great with my Phenom II x6 1090t but I upgraded to the FX Chip and first had the black screen but after pulling the mobo battery to reset the BIOS it boots in to the BIOS just fine but windows 7 locks up (even after the hot fix). Is there an issue with this BIOS version and the FX 8150 or are you just telling him to revert to the old BIOS version because it was working? I am going to update the firmware on my OCZ Agility 3 SSD which is the only other thing I can think could be causing a problem. Memtest cleared the RAM. If there is a reason for me to try an older BIOS version I will do that too.

890FXA-GD70 BLACK SCREEN

I press the "Turn on the fracking computer" button, the machine starts to rumble, but the screen is black.
Inside the chasis, I see that the letters F F are blinking along with the red HDD-LED
What I've tried: Change GPU (one that does not req. extra power), change RAM, place the RAM in different slots, reset BIOS, re-socket the CPU.
The only thing I have not tried yet is to try a different PSU, that is because I do not have one near me at the moment.
I'ev tried a 650w PSU that came out of a working computer, didnt make mine work.
Also, the GTX GPU card's fan does not power up.
The DVD-ROM does not eject if it is conected to the motherboard, but if I remove the cable, it will eject once I've restarted the computer.
Motherboard
MSI 890FXA-GD70, Socket-AM3
RAM
Kingston DDR3 HyperX 1333MHz
CPU
AMD FX-4100 4-Core Processor
GPU
XFX GeForce GTX 285 650M
PSU
550w Chieftec

Quote from: xmad on 03-August-12, 19:57:09
Sounds like you have tried everything except the cpu & mobo. If this was working before and happened suddenly, it is probably the mobo and possibly the psu. (PSU died and took out mobo) Seems like the only thing you have left to do to be 100% sure is to try the cpu in a different comp.
**If this is a new build and never started, take the mobo out and check for extra stand offs or shorts. Perhaps even put it togehter with 1 stick of ram , cpu, psu on a non-conductive surface.
The card is about 1 1/2 year old now, and was working fine before.
The CPU is 1 day old.
Also, the PSU ahve only been used twice, I bought it so that I had one in reserve in case I needed one to rule out the posibility of a defect PSU.
I will try and put the CPU in my primary computer later today and hope for the best.
I've also tried the RAM trick.

Black screen during booting despite using Thinkvantage button

Hi
Helped a friend yesterday with headlined problem (see above). The problem appeared to be related to the Presentation Director (Fn+F7). So I connected an external display and that was that. Easy solved when U can see......
The question: While booting I used the blue Thinkvantage button but obviously this simpel presentation facility overrides the vital Rescue & Recovery's workspace to show up??? How is this possible? May the R&R facility be deactivated? If so, how do you reactivate it again? If I didn't had another display nereby this would not been solved.
Grateful for any explanation!
Regards//Pc

Plaincollar, welcome to the forum,
how is the BIOS configured as far as boot display device is concerned? Ensure that you have the ThinkPad screen is set as boot display device in the config > display menu. BIOS Simulator Index - ThinkPad General
Hope this helps
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Black screen comes when is use panaroma mode in my ipod touch 5g

when i had purchased it was working fine but nw after 1 week whenever im trying to use panaroma mode the camera brighness automatiaclly get reduced & dont see anything but when i cancel it and use ormal camera then it is working fine

You can try the standard fixes.
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

I have an iPhone 3. I selected to update it and suddenly it has frozen on a black screen displaying the USB and iTunes icon. How do I get my phone back?

I tried holding the power off/home button simultaneously however, this resulted in nothing. I need my phone!!

Try holding just the home button for a while.
Try a program called TinyUmbrella, it's good with getting your phone out of funny states like that.

HT4623 I was updating my iphone 4 and after if showed it ipdated, it has a black screen showing my usb cable and and an arrow pointing to itunes. What do I do?

Any ideas as to what I need to do?

Plug it into your computer running iTunes and restore it. It's in recovery mode.

Lync 2013 desktop sharing is giving Black screen when using virtual machine

Hello,
We have a user who is connecting our network through VPN and connecting to a virtual machine. He is able to login to lync but when he start desktop sharing or some one sharing the desktop to him, he is getting black screen. He is using windows 7 and Lync
2013 client. Please advice

Hi,
Did he receive any error message?
Please double check the ports for VPN traffic.
Please also enable logging on Lync client for further troubleshooting.
What’s more, when users connect to the corporate network using a VPN client, Lync media traffic is sent through the VPN tunnel. This configuration can create additional latency and jitter because media traffic must pass through an additional layer of encryption
and decryption. The issue is compounded when the VPN concentrator is busy.
You can configuration like this:
Lync client connect to the Access Edge Server for all signaling connections when on the corporate VPN. However, Media sessions routed through the A/V Edge Server interface instead of establishing connectivity through the VPN tunnel.
More details:
http://blogs.technet.com/b/nexthop/archive/2011/11/15/enabling-lync-media-to-bypass-a-vpn-tunnel.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

890fxa-gd65 black screen due to usb use ?

Similar Messages

Maybe you are looking for