9171 driver installation problem with LV 8.5.1 and NIDAQ9.3

Hello,
I just bought an NI9171 chassis with a NI9477 DO board after checking the compatibility (driver, LV version). Everything seems to be ok, but I can't manage to get the right driver installed within NIDAQ 9.3. I tried it with NIDAQ 9.4. Here the driver was installed properly and I could do some tests in MAX, but my DAQmx LabVIEW library was completely deleted during the installation of 9.4...Re-intsllation of NIDAQ9.3 brought back the DAQmx library, but the driver is not working anymore. One thought is to copy the library somewhere else and install 9.4 again....but in case this would work, it should not be the correct way to solve the problem. Could anyone tell me, if there is something wrong with the 9.3 readme or suggest a solution for that problem? Unfortunatly I have no SSP anymore and can't get direct support by NI ;-(
Here you can find the readme:
http://download.ni.com/support/softlib//multifunction_daq/nidaqmx/9.3.0/readme.html#OS
Thanks for any hint!
Olli
Solved!
Go to Solution.

Hi Olli,
Sorry for the inconvenience, however DAQmx 9.3 does not support 9171. This is error in our documentation. It was first supported in 9.4. However I do have a workaround for you. It involves installing DAQmx 9.4/9.5's core components with DAQmx 9.3 LabVIEW support:
1) Uninstall all versions of DAQmx
2) Install DAQmx 9.3 Full and reboot
3) Run the DAQmx 9.4/9.5 installer
a. Select Custom then click Next
b. For "Application Development Support" select "Do not install this feature"
c. Click through the next few menus until you get to "Start Installation." Make sure that Application Development Support is NOT under the Upgrading section
d. Continue the install as normal and reboot.
5) The DAQmx palette should be in LabVIEW 8.5.1
Please let me know if you have any question. Again I apologize for the error.
Steven K.
National Instruments
DAQ Software Engineer

Similar Messages

Driver Installation problems with mega 180

Can anyone help me out?
I am re-installing a Mega180 that I built 6 months ago, unfortunately, the original driver disk is damaged and I have downloaded the drivers from the MSI website.
for some reason both the PCI modem and wireless network card are now not recognised at all by windows XP. the wireless network drivers that I downloaded do not work either.
how can I reinstall these drivers and where can I get an original install disk from as my retailer says that they cannot get me one?
thx
Jon

How to contact MSI. they should be able to send you a new CD if you ask nicely
http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=546&kind=4
did you download the wireless driver from here?
are you actually using the modem if you use the wireless network feature? if not you may as well just disable it in BIOS and save some system resources

Installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system

We are having installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system.
Using interface, when installation come up to “Installing Wizard” window where Gateway Name Server Configuration window should take place, everything just freeze up
Using console, after installation we obtain following errors:
Installing Siebel Enterprise Server. Please wait...
unable to launch: "ksh export
LD_LIBRARY_PATH=/siebel/gtwysrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/gtwysrvr/bin/setup.jar run -args LANG=ENU
MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm" error code:
"236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/bin/setup.jar run -args LANG=ENU
REPEAT=FALSE MODE=LIVE MODEL_FILE=/siebel/siebsrvr/admin/siebel_server.scm"
error code: "236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/mgmtagent/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/mgmtagent/bin/setup.jar run -args
LANG=ENU MODE=LIVE
MODEL_FILE=/siebel/siebsrvr/mgmtagent/admin/mgmtagent_ses.scm" error code:
"236"(SBL-STJ-00152)
Running command :
./ssincfgw -is:javaconsole -console -args LANG=ENU MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm
Infinite loop of following error pops out:
An error occurred during wizard bean change notification:
java.lang.NoClassDefFoundError
at ConfigInitialize.execute(ConfigInitialize.java:21)
at com.installshield.wizard.StandardWizardListener.execute(StandardWizardListener.java:123)
Is there any clue how this error can be solved??
Thanks in advance!!
Gordon
Message was edited by:
user605023

I'm facing the same error message while install Siebel 8.0 on OEL. But before I had this ksh problem, it complains about disc space first, and I actually has plenty of disk space under the directory (it needs only 0.7 G and I have 17G free). Anybody has encountered such problem before?
/net/sdcnas05/vol/engfs01/v_sia/8.0SIA[20405|http://forums.oracle.com/forums/]/Release/Linux/Server/Siebel_Enterprise_Server
-bash-3.00$ ./setuplinux -is:javaconsole -console
Initializing InstallShield Wizard........
Initializing InstallShield Wizard........
Launching InstallShield Wizard........
0% 25% 50% 75% 100%
Welcome to the InstallShield Wizard for Siebel Enterprise Server
The InstallShield Wizard will install Siebel Enterprise Server on your
computer.
To continue, choose Next.
Siebel Enterprise Server
Siebel Systems
Press 1 for Next, 3 to Cancel or 4 to Redisplay [1]
Siebel Enterprise Server Install Location
Please specify a directory or press Enter to accept the default directory.
Directory Name: [siebel] /slot/ems1115/appmgr/20405
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the products you wish to install.
[ ] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 1
[X] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 2
[X] 1 - Gateway Name Server
[X] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]:
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Configuring uninstallers. Please wait...
0% 25% 50% 75% 100%
Choose the setup type that best suits your needs.
[X] 1 - Typical
[ ] 2 - Compact
[ ] 3 - Custom
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the languages you wish to install.
[X] 1 - enu - English (American)
[ ] 2 - fin - Finnish
[ ] 3 - kor - Korean
[ ] 4 - cht - Chinese (Traditional)
[ ] 5 - ita - Italian (Standard)
[ ] 6 - esn - Spanish (Modern)
[ ] 7 - deu - German (Standard)
[ ] 8 - chs - Chinese (Simplified)
[ ] 9 - tha - Thai
[ ] 10 - dan - Danish
[ ] 11 - heb - Hebrew
[ ] 12 - fra - French (Standard)
[ ] 13 - nld - Dutch (Standard)
[ ] 14 - ptb - Portuguese (Brazilian)
[ ] 15 - csy - Czech
[ ] 16 - jpn - Japanese
[ ] 17 - ptg - Portuguese (Standard)
[ ] 18 - ara - Arabic (Sa`udi)
[ ] 19 - sve - Swedish
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
{color:#ff0000}*Drive "/slot/ems1115/appmgr/20405" does not have enough space to install the*
selected configuration. Please free up "766446" KB on drive
*"/slot/ems1115/appmgr/20405" before continuing.*{color}
-bash-3.00$ pwd
/slot/ems1115/appmgr/20405
-bash-3.00$ df -h .
Filesystem Size Used Avail Use% Mounted on
sdc1002nap-vlan1:/vol/ems_39426_1115
71G 55G 17G 77% /slot/ems1115

Software Installation Problems with Media Source and Nomad Explo

Hello Creative Users,
recently I had to reinstall my operating system on the PC. I have an IBM Thinkpad R30 with a Sitecom USB2.0 pccard. I am running WinXP Pro SP2 with all latest updates.
I have a Nomad Jukebox Zen Xtra with Firmware .20.08 and an update harddri've of 80GB.
As long as I was running the software on my previous installation everything worked fine.
I installed the driver .26.02. This recognized the Jukebox. Musicmatch is able to communicate to the Jukebox and recognizes all files on it.
When I installed Nomad Explorer I got an error ctregserv failed because ctin...dll is not found.
When I tried to install Media Source from the original disk it showed an error after 30% Media Source not found. Install Media Source before continuing.
This is what I received now with all verisons of Media Source and Noamd Explorer incl. .30.0.
Can someone help me as synchronizing with Musicmatch is a pain.
Thanks
Rolf

Hi everyone,
as I saw many questions regarding installation problems with Mediasource or Nomad Explorer
in this forum I will answer my own question right here. I was pointed to the answer by a friend with a similar problem on some other software.
When trying to install the Creative software under WinXP SP2 I happens that the registration does not work. the reason are missing write attributes to the keys for
Creative software. To correct that go to: Start, Run and enter regedit. Hit ok and you are in the registration editor.
Find the Creative location unde HKEYS_SOFTWARE. Click right mouse button and choose
properties.
Check full access for your user as well the system user. click on advanced and mark both all the users you want to install from. Check the lower box below the user window sayin something about roghts being propagetd to lower folders etc. Cklick conform and ok, click confirm on previous screen and close regedit.
Now you should be ok and able to install.
Regards
Rolf

MOVED: Installation Problems with PM8M2-V

This topic has been moved to Intel P4 & Celeron P4 based board.
Installation Problems with PM8M2-V

port 1. I did try it on port 2. The odd thing is that this mobo is the first that I have seen where SATA is not recognized in the BIOS setup.
I did solve the problem, though. I bought a Via chipset mobo from a different manufacturer. I was tired of spending hours on this project and the fact that MSI tech support told me that it was Microsoft's problem was no help. I didn't want to create a separate drive image of this one mobo. The fact is that MSi created a mobo that required loading additional drivers for SATA to be recognized- I have not worked with any other manufacturer who required additional drivers loaded to work with SATA (a drive standard).
The new mobo fired right up, recognized the SATA, and I was able to Sysprep the PC in no time. Case solved!

I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?

I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?

Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

HT4623 How can i solve installation problem with iOS 6.

How can i solve installation problem with iOS 6. I've tried to install it on my iPhone 4 but nothing turned out. Thanks in advance!!!!

can you connect your device to Tiunes and check to see if there are any files in
OSX: ~/Library/Logs/Crashreporter/Mobiledevice/<Devicename>/
Windows: %appdata%\Apple Computer\Logs\Crashreporter\MobileDevice\<Devicename>
specifically named OTA......
Also for the failed itunes restore please attach the contents of the latest log in
OSX: ~/Library/Logs/<iphone or ipod or ipad> updater logs
Windows: C:/User/ Appdata/Roaming/iTunes/<iphone or ipod or ipad> updater logs

Problem with installing Photoshop elements 9 and adobe support advisor

Hi, I've received a graphic tablet with 2 programs: the first has been downloaded and works perfectly while the second, PSE9, has been giving me problems for at least a week!
I downloaded it and now I have a winzip file full of strange things (one of this is set up exe which tells me that I have to install adobe support advisor) and two files which said 3DF.tmp and PSEP9(1).zip.download and if I try to click them they tell me that I have to find on the Net the program to open them because I can't. And I don't know which program is required.
I tried a lot of times to download the adobe support advisor, I have enough space on my disc and my farewall is deactivated, but when the program begins I saw this annoyant message
cpsid_82829s5 Missing installation file bootstrapper error occured
with this code for a support from adobe 00-67325-032018052012
I unistalled it and retried, but nothing.
Please, I just want to use my tablet with the programs which are comprised in the package, why it's so difficult to download this damn photoshop elements 9????????????
Thank you

In the error message it doesn't tell me
"Installer has detected that a machine restart is pending. It is recommended that you quit the installer, restart try again,"
neither "Installer failed to initialize. File not found. Please download Adobe Support Advisor to detect the problem."
and I have enough space and I have Windows xp then I should be able to install it. I tried to unistall and install again the support advisor but nothing. I'm desperate.
Messaggio originale----
Da: [email protected]
Data: 18/05/2012 22.20
A: "Questionlady"<[email protected]>
Ogg: Problem with installing Photoshop elements 9 and adobe support advisor
Re: Problem with installing Photoshop elements 9 and adobe support advisor created by Jeff A Wright in Trial Download & Install FAQ - View the full discussion
Did you try the steps listed in http://helpx.adobe.com/creative-suite/kb/troubleshoot-error-messages-b ootstrapper-cs5.html which was identified by the Adobe Support Advisor? If so can you please list each step and the result of those steps. This will allow us to best advise you on your next steps.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4420419#4420419
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4420419#4420419. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Trial Download & Install FAQ by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I have just been having problems with my Canon MP250 printer and decided to uninstall and re-install the printer and everytime I try to re-install the printer trough preferences and all I keep getting was a message saying "preparing to queue"......

I have just been having problems with my Canon MP250 printer and decided to uninstall and re-install the printer and everytime I try to re-install the printer trough preferences and all I keep getting was a message saying "preparing to queue"...... I then decided to try and reload the Canon printer drivers and for some silly reason I deleted the existing Canon printer drive. Now I cannot load them from the CD provided with the printer or from downloads through the Apple store. If anyone out there could help me I would be greatly appreciated......

These Canon printer/scanner drivers from Apple - http://support.apple.com/kb/DL899 - should work. The MP250 is listed on the support page. Try downloading and installing them.
Good luck,
Clinton

I HAVE PROBLEMS WITH LION 10.7.1 AND THE PRINTER EPSON STYLUS TX515FN, DOES SOMEBODY KNOW IF IT IS POSSIBLE TO BE USED?

I HAVE PROBLEMS WITH LION 10.7.1 AND THE PRINTER EPSON STYLUS TX515FN, DOES SOMEBODY KNOW IF IT IS POSSIBLE TO BE USED?

Yes it is, you must install the driver. Download the driver from here here:
http://www.latin.epson.com/v4/asp/soporteDrivers.asp?idProducto=C11CA49212

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

This is a major problem with Lollipop, but yo said it started 2 months ago. Several people have fixed problem by removing FaceBook And Face book messenger and then re loading the apps again. You might want to clear your cache before reloading. Not sure this is your problem, but worth a try. Good Luck

Problems with creation of catalogue XPGrpwise and temporary

Problems with creation of catalogue XPGrpwise and temporary files.
I use GroupWise 8.01 and WinXP (SP2), OpenOffice 3.1.
Why at opening files in Library, temporary files are not created in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\XPGrpwise, and created in catalogue C:\Documents and Settings\Jon Smith\My Documents. That causes problems. How to change a situation that worked as it is necessary.
Catalogue XPGrpWise is created and leaves duly in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\.

Cvetaev,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

HT4009 Do you understand me ? I want money back.Because I have problem with LINE In App Purchase.And no one try to resolve this problem.And the answer of NEVER LINE JAPAN they don't have responsibility.I think it will be effect with APPLE image also.I wan

Do you understand me ? I want money back.Because I have problem with LINE In App Purchase.And no one try to resolve this problem.And the answer of NEVER LINE JAPAN they don't have responsibility.I think it will be effect with APPLE image also.I want you to help me everyways to refound my monet back.Could you?

Contact iTunes Store Support.

Performance Problems with MS IE 6.0 and EP 7.0 (2004s)

Hello,
we have a problem with ie 6.0 webbrowser and EP 7.0 (2004s). When we open for example the theme editor in the ep-system-administration site we must wait with MS ie 6.0 webbrowser ~ 18s for the site opening. With firefox 2.0 we can open the theme editor with ~ 1s.
Have/Had anybody the same problem? - Or is this a knowing problem with ie 6.0.
We used for the network analyse the tool: httpwatch 3.2. We can see, that the ie 6.0 must wait into the all-time of 18sec. 13sec for opening the site: emptyhover.html.
- Thanks in advance for a tip !
Best Regards,
Ralf

Hello Ameya and hello Shao,
we use the version SP12 NW 2004s. We have the this problems with a base application of portal: theme editor.
We can see in the httpWatch 3.2 analysis tool, that the ie 6.0 load a much of cache files from the client webbrowser. Could it be this problem? - I red in this forum problems with the webbrowser-parameter: "Empty Temporary Internet Files folder when browser is closed"
Thank you for your helping.
Best Regards,
Ralf

9171 driver installation problem with LV 8.5.1 and NIDAQ9.3

Similar Messages

Maybe you are looking for