9360 keeps rebooting 2 days now. I really need help!!
My 9360 keeps on rebooting. I did the battery pull, press back button till reboot is done but it doesnt work. I also connected it to my pc to "update" as a previous person was advised but the 9360 is still rebooting. Can anybody please help me? Perhaps the 9360 was'nt a good choice? Thanx
Hello BB100,
In this case we can try to reload the software on the BlackBerry® smartphone to make sure it is running the latest version and there are no issues with the OS.
Here is how to backup your BlackBerry smartphone http://bbry.lv/oPVWXc
Once you have backed up your BlackBerry smartphone please follow the link below to complete a clean reload of the BlackBerry smartphone software.
Link: http://www.blackberry.com/btsc/KB03621
Once completed test it and proceed with selective restore, here is how to restore http://bbry.lv/qgQxLo
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!
Similar Messages
-
Hello I really need help. I have to blue tooth devices I can play music from. IHOME and a tango trx. I accidentally hit forget this device now I can't get tango back.
<Email Edited by Host>Re-pair the devices and you should be good.
-
Well my ipod 4th gen was updated it shut off and now when i try to turn it on it stays on the apple logo for abit then gets stuck on a white screen od blue or mixed colores i really need help fixing this plzz help
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I just replaced my macbook's batter and charger about a month ago, but it hasn't been charging for about 2 days now? Could someone help identify the problem and/or provide a solution.
Try Resetting the System Management Controller (SMC)
-
I've tried a lot to get it to work, even using a new charger and putting it into Disk Mode. I really need help. Can anyone give me some advice? Thanks.
Hi Dawson777,
Thanks for visiting Apple Support Communities.
It sounds like you're receiving the message "An iPod has been detected, but it could not be identified properly" when you connect your iPod nano to your PC. You have tried some good troubleshooting steps already, and you may want to review the additional steps in this article:
iPod nano: Error message saying that iPod 'could not be identified properly'
http://support.apple.com/kb/ts3218
Best Regards,
Jeremy -
Hi I hope some one can tell me step by step how to fix windows 8.1, I can't update any of my Apps and can't install any new apps now and I get error code 0x80073cf9? But my problem is different than most of the other FIXES I read about, because nothing
fixes my problem to be able to install new Apps and get app updates and stop getting that error code?
I keep getting same error code 0x80073cf9 after I try any of the FIXES I have read about and tried all the fixes on my Lenovo Z580 laptop, that came with windows 8 and updated to 8.1. And ever since I bought this laptop I could
always install and update all my apps for the last year when I had Win 8 and Win 8.1 now. This has been going on since April and May and its driving me crazy! And from the May updates I did get all the updates and
I also installed the KB update that said I need this KB to get all updates in the future.
But all the other people when they get this error code they could not even open and use any of their Apps already installed. And they also get the error code when they try to update or get a new apps.
But I can click on any APP installed already and use all my Apps with no problems. I have read so many how to fix this error code but nothing works! :-( I have tried a lot of
the fixes on Microsoft forums that says do this and the fix will get rid of the error code but I keep getting the same error code after I try that fixes. And I have read a lot of other windows 8 an windows 8.1 web sites when
I search for how to fix this error code? And tried all of the fixes that were different from the Microsoft forum fixes. But after I try those fixes I still can't install any apps or can't get my app updates?
Please to any person's who can help me by giving me more that 1 fix, because I have tried so many fixes, If you know more that 1 fix tell me how to do your fix step by step so I can understand what you say to do to fix my windows store?
Thanks for any and all help? And if I don't get any help in this section of the forum I will try to put this in a different area, if I don't get any help at this section of the forum I will try to ask this in another part of he forum ok?
I really need HELP with this so I can get my laptop working again to install new apps and get the updates to my apps?Fixed the problem by going to settings/store and logging out with apple ID. Then logged back in with password and updates, apps, and iTunes store seem to work ok now.
-
Hello. My mac can't connect to my time capsule. There is no response and I can't put it back to the originals definitions because all my files are there and I can´t loose them. (sorry about my bad english, but I really need help!)
Your files are unaffected by a reset.. no reset via the reset button on the TC harms, deletes or does anything to your files.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Here is how to do a fully manual setup for TC which is sometimes necessary with Mavericks in particular.
Airport Utility shows "unexpected error - please try again" when connecting to Time Capsule -
Really need help BBM not working on wifi
ok so I've just updated my torch 9800 software and with it all of the apps, but there's the problem that my BBM wont work on wifi. why is that? I'd tried to resend the service books but there was a message about server conection problems, then I'd even tried by the BBM configuration icon in the setup menu but there was another message (imposible to configurate BBM, a temporary error was notified with the server) so I dont really know what to do... really need help this is my only comunication way with my family on the other side of the world.
On the handset, go to:
For OS5 and 4.x
Options - Advanced Options - Host Routing Table
and click Register now, and escape back to the home page.
For OS6 and higher
in options, device , advanced, host routing table, click on menu and choose register now.
Wait 2 minutes and see if registration to network happens.
Resend your service books from your carrier BIS site:
From your handheld device: http://www.blackberry.com/btsc/KB15402
Go to the Personal Email Set Up icon and log in. Then under Help!, select Service Books, then select Send service Books.
From your desktop PC: http://www.blackberry.com/btsc/KB02830
North American Carriers - scroll down to select your carrier
WorldWide Carriers - Find your carrier on the list
3. With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot. This reboot, even if you have already done this, is often needed to install the service books.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V -
please i really need help!
I had the same problem on my Mac Pro, iPad, Macbook Pro. Could not load iTunes, App Store or any support community. Called Apple Care and she asked if I had rebooted my router in awhile. I had not. Each of these would load half way and then just stop. She said iTunes and App Store could be stopped as they are different than my Discover or e-Bay accounts, which were fine. So during the 75 min call I pulled the power cord of the Netgear Wi Fi router, let it sit for 2 or 3 min and then replugged the power adapter. In about 4 to 5 min the sites started to load, although not displayed correctly. After quitting and re-starting the apps in question they are working fine again. But this has happened twice now in a 6 hour time period. So give it a try, but also give it a couple of tries.
-
dear creative experts
i have a 5.1 sb live series without live drive! in kx drivers there is an option that uses the subwoofer jack out as headphone jack out, i really need help cuz' i want 2 have this option in creative drivers 2,it would be very usefull 4 me in recording sessions( multitrack ) cuz' i don't have a headphone jack on the front panel of my speakers ( teac power max 260/2 2.0 ) and every time when i want 2 record voice in multitrack i have 2 unplug the speakers and plug the headphones.
hope there is a way 2 resolve my problem...ahh, now I understand! Thanks mate! your not disturbing by the way! thats what we're here for, to help people!
So you want to know if creatives software/drivers, allows you to change the signal on the output/input, via the creative software, so you dont have to switch it manually everytime.. Im not so familiar with creative software, but I guess if you cant find the feature yourself, then there is no actual feature on the software by creative. But a moderator/administrator, know this alot better than I do.. -
'Easy Set-up' Option - Problem with edit canvas/windows - really need help!
Hello Everyone. . .
Have a problem that i really need help with, i have tried so many different things to sort this - but with no sucess.
I usually work in High Definition and i have recently done a small project for someone in DV. When changing to work in DV, i selected the DV setup from the 'Easy Setup' menu. I have now changed back to HD and there are a few things different with Final Cut that i can't shift!
When i move a clip from the capture bin into the edit window, the clip no longer fills that window like it always used to and there are lines at the top and the bottom of the clip - almost like it is in widescreen.
Editing like this wasn't too much of a problem, but when i came to compress and do a final render of the whole film - there was the same black lines on the top and bottom of the film.
I can't figure out how to get the setting back to how they were, and have the clips fill the edit windows and fix the end render/compress.
Any ideas from anyone on what i am experiancing with all this? And. . . how to fix this problem?
Any help on all this will be very much appreciated!Hello Everyone. . .
Have a problem that i really need help with, i have tried so many different things to sort this - but with no sucess.
I usually work in High Definition and i have recently done a small project for someone in DV. When changing to work in DV, i selected the DV setup from the 'Easy Setup' menu. I have now changed back to HD and there are a few things different with Final Cut that i can't shift!
When i move a clip from the capture bin into the edit window, the clip no longer fills that window like it always used to and there are lines at the top and the bottom of the clip - almost like it is in widescreen.
Editing like this wasn't too much of a problem, but when i came to compress and do a final render of the whole film - there was the same black lines on the top and bottom of the film.
I can't figure out how to get the setting back to how they were, and have the clips fill the edit windows and fix the end render/compress.
Any ideas from anyone on what i am experiancing with all this? And. . . how to fix this problem?
Any help on all this will be very much appreciated! -
Really need help with MSI R7970-2PMD3GD5/OC:(
Greetings to all,
I really need help with my brand new MSI R7970-2PMD3GD5/OC. I've purchased it two days ago and I didn't really have time to test the card until yesterday. The card is I think way to hot for my "liking". It idles at 56c-60c, at full load in Heaven benchmark 3.0 in 1920x1080, extreme tessellation and 8xAA card reaches 95c-97c. Stock cloacks are 1010Mhz/1375Mhz and stock voltage is 1,174v. Case is being cooled by two Noctua NF-P12 fans. Also I tried lowering the voltage and "underclocking" the card to a standard 925Mhz in small increments, but it doesn't help at all. Each and every time it results in BSOD and dx dll errors and complete system failures. Replacing the card wouldn't be a problem if I lived in a "normal" country that has access to a steady supply. Retailer that sold me a card told me that only 5 cards total have been imported from the launch day and told me that i bought the "last" card in my country. They could order a replacement but it would take them more then a month to do so.:( Ohhh and one more thing I don't overclock, everything in my case is at their default values.
Recently, I read that "Amd released" a bios update for a standard reference boards that turns them into a "GHZ editions". Also lot of users report a lower voltage requirements and lower temps with that "boost bios". As I understand this card pcb is not Amd's reference board design, I could be wrong it's not that uncommon.. So I didn't want to risk warranty by flashing it to a position 1. Will MSI release the boost bios for this model of card? I am humbly asking MSI staff on how to proceed regarding this problem. I would be immensely grateful for any help you could provide.Quote from: Svet on 24-August-12, 18:13:26
what PC case you use exactly?
have you tried to open PC case side door and to retest?
Hi,
it's open case. If i close it the temps get even worse:(
They get better for other components, but not for gpu. Two Noctua NF-P12's are cooling the case, first one is positioned above gpu, left side next to cpu. Other is right beneath the gpu, right side of case. Just under the hdd section of the case. I tested each and every component with my backup card nv 8500gt. They function within the specified parameters. I'm getting somewhat worried.
П.С. Поздрав Свет
да ли сте ви са наших простора да не куцам на енглеском? -
I REALLY NEED HELP WITH MY CURVE 9300'S WIFI!
HI !
i have a blackberry curve 9300, OS5. I got it secondhand. It worked really great, but the problem started when I've done that thing within the host routing table. Though my wifi is connected, I can't use the internet. whenever I tried the BB browser and any other application (e.g. facebook, opera mini, etc.) i get a message that says 'i am not in an area that supports blah blah...' or 'unable to connect to internet please try again later'. I checked the browser under browser config and it is set to my local network provider. i changed it to hotspot browser, saved it. But whenever I go back it also goes back to my local network provider. i have tried almost EVERY troubleshooting I've read on this forums and in other forums but still no luck. The problem worsened when I did a security wipe on the emails, contacts, etc.
-APN settings are disabled
-default browser set to hotspot browser
-firewall disabled
-data services are on
Everyone said that it has nothing to do with that activation enterprise so I did not configured it after wiping.
I also tried doing a hard reboot (pulling the battery out and waiting for 5 minutes before turning it on) but it will only fix the problem for sometime and it will go back again.
Calling my network provider would just suggest to get a plan when in fact, I was able to use the device's wifi well before without any plan.
I don't want to upgrade my BB to OS6 coz it easily drains the battery of device and I cannot afford doing that because I go out a lot.
I also tried changing my sim card and network provider but wasn't successful.
I also tried deleting the name of my local network provider in the service book under options.
What do you think could be the problem? Any suggestions? I really, really, REALLY, need help.
PLEASE ! THANK YOU VERY MUCH IN ADVANCE!Hi miochan984,
Welcome to the support community!
A supported data plan from your mobile network provider may actually be required to use the Facebook for BlackBerry smartphones application as well as the browser. I would recommend verifying with them which services they support over a Wi-Fi connection without a data plan.
Let me know if you have any other questions.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)! -
I have not done anything strange like changing something in my computer or IPhoto. One day it just decided not to open. I dont have my photos backed up from IPhoto and I really need the photos on there and Iphoto itself to graduate in two weeks.
I will click on Iphoto and it'll jump twice, open but it will be totally blank white and immediately have the spinning rainbow wheel and it never loads. I'll then put my mouse over the icona nd it'll say "IPhoto not responding" and everytime I have to force quit. I really dont understand what happened.
I have googled for days variations of "My Iphoto will not open" and none of what people are saying helps at all because all of them have done something to mess up their apps. I really really need help, please, its got to be something so simple because I didnt change anything on my computer.As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there? -
ANYONE out there? Sorry but I really need help.
I posted a request a while back and really need help. Apple? Anyone? I'm having serious trouble with Mail and my ISP says it is with my local machine/OS.
The subject line of my post reads:
"Mail- deleted messages keep reappearing in inBox"
Forgive me for posting again but I'm in need of help.
Thanks,
JoeIn the mail application, in preferences, accounts, choose your mail account, and click the account behaviors tab, if 'move deleted messages to a separate folder' isn't checked, the messages will stay in your inbox until you hit the 'erase deleted messages' time or you manually delete them from the menu bar (mailbox then erase deleted messages).
Maybe you are looking for
-
Ok, so i downloaded the trial version of Photoshop CS6 on my MacBook using the Adobe Download Assistant. My net speed is really slow (30 kb/s) so it took a while. Now the programme is 'Extractiong files' and also says "this may take a while." the ext
-
I having a huge problem with the facetime app, i can't sign in, I am stuck in signing in step. I've tried using different accounts for FaceTime but still can't access, I've tried creating an account in FaceTime but still can't access, but a fiend of
-
I have a problem connecting Muse with business catalyst.
I have a problem connecting Muse with business catalyst. When I start the publication is presented with the following message: Timeout when accessing with Adobe ID. Check your network connection and try again. But the connection is working properly.
-
Restrict user to concurrent use
Hi all I am a administrator and i create an user who only able to view the reports. Now can anyone help me how can I restrict that user not to log in from different PC at the same time. Thank you for helping me. Md. Nahiduzzaman
-
Dears I want your help regarding the following; using FAGL_FC_VAL, I want to make reversal automatically at payment (or clearing date) to customers or vendors.