9i form gen inserts unsupported call to SHOW_MENU ?!?
... in a pre-form trigger, causing all compilations to fail. I have tried generating forms with no templates and no object libraries -- it still generates the call.
Has anyone else seen this, or is this a case of "ORA-001 : User IQ too low." ?
This is inserted into every generated form:
/* CGSM$SHOW_STRIP_MENU */
/* Display the strip menu at the top of the screen on entry into form */
BEGIN
show_menu;
END;
As you know, "SHOW_MENU" is not supported in forms 9i. I have worked around this by creating my own "show_menu" which does "null;" in a .pll that I attach to all generated forms, but that is more than a bit hokey.
I was thinking that perhaps this is coming from an old template or something, butI can't find it in any of the distributed templates or object libraries. I also checked to see if perhaps through bad registry entries somewhere, it was looking at old Des6i templates in my ora806 directory, but even after renaming the ora806 directory to 806old, it still managed to insert the show_menu call.
Similar Messages
-
Display values in the called form whose data is inserted in calling form
Hi,
We have a custom form (Form 1) wherein we call another form (form2) when a button is pressed in Form1.
Scenario
Form 1 - contains 3 blocks -
-->Header Block - HB,
-->Child Block - CB1 - which is child of HB and is multi records block
-->Child Block CB2 - Child of CB1
The canvas of forms 1 holds only HB and CB1 and due to business reasons we are populating CB2's table (say T2) in the post insert trigger of the CB1.
A button is pressed which opens a new form - a display only form (form 2) .
Form 2 just fetches the records that are inserted into the table T2. Note that Form 2 is also a multi record block.
Issue
Assuming that I update some value in Form 1 - block CB1 and save it ; and then click on the button...how should I make sure that the changed values are reflected in the Form 2.
Questions
1) On updating CB1 values - since this impacts values in CB2 T2 table- which trigger should this be handled.
2) how should we make sure that on clicking the button that opens Form 2, the changed values in T2 are reflected.
Regards
S948611 wrote:
Hi,
We have a custom form (Form 1) wherein we call another form (form2) when a button is pressed in Form1.
Scenario
Form 1 - contains 3 blocks -
-->Header Block - HB,
-->Child Block - CB1 - which is child of HB and is multi records block
-->Child Block CB2 - Child of CB1
The canvas of forms 1 holds only HB and CB1 and due to business reasons we are populating CB2's table (say T2) in the post insert trigger of the CB1.
A button is pressed which opens a new form - a display only form (form 2) .
Form 2 just fetches the records that are inserted into the table T2. Note that Form 2 is also a multi record block.
Issue
Assuming that I update some value in Form 1 - block CB1 and save it ; and then click on the button...how should I make sure that the changed values are reflected in the Form 2.
Questions
1) On updating CB1 values - since this impacts values in CB2 T2 table- which trigger should this be handled.
2) how should we make sure that on clicking the button that opens Form 2, the changed values in T2 are reflected.
Hi S
This is your STATUS
Total Questions: 16 (15 unresolved) YOU didn't keep track your post and also don't close your thread when your problem is solved without marking the right answer. For this when people search this forum and will get similar problem and your post ..they are confused, is there so solutions ???
Hope remember this...
Let's come to your questions.
1) On updating CB1 values - since this impacts values in CB2 T2 table- which trigger should this be handled.You can use post-insert for reflect after insert, and post-update to get reflect the update.
and
2) how should we make sure that on clicking the button that opens Form 2, the changed values in T2 are reflected.when opening the form pass parameter to second form and execute the related data.
For more check the similar post
1. {thread:id=2513529}
2. Calling a form and passing a context
Hope this helps
Hamid
Mark correct/helpful to help others to get right answer(s).* -
How to open a MD form in insert mode when calling from URL ?
I have a MD form and I want to open it in 'insert' mode when I click on the URL.
How can I do that ?
thanks,
MainakI think somebody has asked the same questions earlier but I cannot find the link to that message. Please can anyone help me ?
How to open a form in Insert mode from url link ?
Mainak -
Opening Form in Insert mode but making a query at the same time
My problem is that I want to open a Portal Form in Insert mode but at the same time making a query.
If I call a form with patameters the form opens automatically in update mode (to be more precise with FORMSTATE = UPDATE_AND INSERT). In that case the insert button is not shown.
I have come very close to a solution by running this code:
BEGIN
p_session.set_value(
p_block_name => 'DEFAULT',
p_attribute_name => '_FORM_STATE',
p_value => 'QUERY_AND_INSERT');
END;
under "... before processing the form". The form-state changes to QUERY_AND_INSERT' and I get the record from the table that I want but I still see no insert button!
I think that I can solve this problem in some table-triggers in the database but it would be interesting to know weather it is possible to do this in the portal.Kari,
You can workaround the disappearing Insert button by creating a custom button instead.
If you look at the "standard" Insert button code it looks like this:
--- Type your PL/SQL code here...
doInsert;--- This is the default handler
--- ...and here, thanks...
in the generated forms package doInsert just calls internal insert handler:
procedure doINSERT
is
begin
onINSERT(
p_block_name => p_block_name ,
p_object_name => p_object_name,
p_instance => p_instance ,
p_event_type => p_event_type ,
p_user_args => p_user_args ,
p_session => p_session);
end doINSERT;
If you add a custom button to your form and from PLSQL event combobox select "Custom", then copy&paste this code to the event code:
onINSERT(
p_block_name => p_block_name ,
p_object_name => p_object_name,
p_instance => p_instance ,
p_event_type => p_event_type ,
p_user_args => p_user_args ,
p_session => p_session);
You will get a custom button which does exactly what the Insert button does and it will not disappear from the screen.
Thanks,
Dmitry -
Form field check for calling Dependent task
Hi Folks,
Here is a scenario, I have a custom RO for which I have a Process Form (with Auto Save enabled), which had default values set for its form fields. User provisioning works fine.
The process form has a child form for entering some role data with a single field(multi select/Lookup Field) which triggers a task for every insert, like wise for delete.
I have also created a Request Dataset and Request Template for the same RO with a few fields. The Create Task gets called once the approvals happen and the user provisioning happens.
Is there a way I can call the tasks that are triggered on the child from update?
Or, is there a way I can check for a form field value before calling a task?
I have a request data set as follows:
<?xml version="1.0" encoding="UTF-8"?>
<request-data-set xmlns="http://www.oracle.com/schema/oim/request" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.oracle.com/schema/oim/request" name="ProvisionResourceABC" entity="ABC" operation="PROVISION">
<AttributeReference name="Domain" attr-ref="ABCDomain" type="String" length="50" widget="dropdown" required="false" available-in-bulk="false">
<lookupValues encoded-value="abc.com" decoded-value="abc.com"/>
<lookupValues encoded-value="abc.partner.com" decoded-value="abc.partner.com"/>
</AttributeReference>
<AttributeReference name="ABC Roles" attr-ref="ABC Roles" type="String" length="50" widget="ENTITY" required="false" available-in-bulk="true">
<lookupValues encoded-value="Role0" decoded-value="Role0"/>
<lookupValues encoded-value="Role1" decoded-value="Role1"/>
</AttributeReference>
</request-data-set>
Any pointers appreciated.
Thanks,
Saieshuser9116351 wrote:
Hi Folks,
Is there a way I can call the tasks that are triggered on the child from update? In the provisioning process mark the task trigger as 'Update' on the child form and you should be good.
Or, is there a way I can check for a form field value before calling a task?For this write a task and and adapter which would return true/false depending upon the check of the form field and then depending upon true/false attach the task to generate.
>
HTH,
Bikash -
iPod Nano 7th Gen says "Unsupported. Accessory is not supported" when trying to charge / sync with official apple lightening cable.
It worked for almost a year then suddenly began to say that. My computer [windows], lightening cable and my power brick [all apple official] are all the same as they were when it was working. The iPod is almost a year old now, and has worked perfectly up until about a week ago.
I have tried resetting the iPod, plugging it into different charging sources but it keeps saying "Unsupported. Accessory is not supported"
Does anyone have any ideas on how to fix it?
Thanks.Your iPod Nano firmware and iTunes updated to the current versions?
It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions. -
Help needed in forming dynamic insert statement
HI,
I am trying to construct a insert statement as given below.
Please help me as to how to form this and where am i going wrong?
i want the columns names to be auto populated when a table name is given.
output should be like:
==============
insert into tablename
col1,col2,col3..coln)
values
(col1, col2, col3..coln);
declare
v_sql varchar2(5000);
cnt number :=0;
col_count number;
name varchar2(5000);
TYPE string_assarrtype IS TABLE OF VARCHAR2 ( 25 ) INDEX BY VARCHAR2 ( 20 );
arr string_assarrtype;
BEGIN
select count(column_name) into col_count from user_tab_columns
where
table_name = 'PS_D_RE_BCSREGIONMAPPING';
v_sql:='insert into tablename (' ;
for i in 1..arr(col_count)
loop
v_sql:='v_sql' ||' '||arr(i);
DBMS_OUTPUT.PUT_lINE(v_sql);
END LOOP;
END;Below is the actual code which i am trying to write:
Since the below trigger logic is same for around 25/30 tables i wanted to construct a generic procedure which will take input parameter as tablename and auit_table and form the insert statement which will populate the column names which are different for different tables.
Please guide...
CREATE OR REPLACE PROCEDURE make_trigger( tablename in VARCHAR2,
auditable in VARCHAR2
AS
v_sql varchar(10000);
begin
v_sql := 'DROP TRIGGER TRD_D_AUDIT_D'||tablename;
dbms_output.put_line (v_sql );
v_sql:='CREATE OR REPLACE TRIGGER TRG_D_AUDIT_D_'||tablename||' '||
'BEFORE INSERT OR UPDATE OR DELETE ON 'tablename||' '||' REFERENCING OLD AS OLD NEW AS NEW
FOR EACH ROW';
dbms_output.put_line (v_sql );
v_sql:= 'DISABLE
DECLARE
v_Operator psoprdefn.oprid%type;
v_Sysdate Date;
v_Actn varchar2(1);
V_AUDIT_RECNAME PSRECDEFN.RECNAME%type;
BEGIN';
dbms_output.put_line (v_sql );
v_sql:= 'If (Inserting) Then
v_Actn :='||'''||'A'||'''||';'||
'Insert into '||auditable||'
('||
AUDIT_RECNAME,
AUDIT_ACTN,
AUDIT_OPRID,
AUDIT_STAMP,
D_USER_GROUP,
D_GROUP_DESC,
D_BCS_ID,
D_UBR_ID,
D_FILTER_ID,
D_NAME_ACCESS_TYPE,
D_GLOBAL_EMP_LIST
Values
V_AUDIT_RECNAME,
v_Actn,
v_Operator,
v_Sysdate,
:NEW.D_USER_GROUP,
:NEW.D_GROUP_DESC,
:NEW.D_BCS_ID,
:NEW.D_UBR_ID,
:NEW.D_FILTER_ID,
:NEW.D_NAME_ACCESS_TYPE,
:NEW.D_GLOBAL_EMP_LIST
end if;
end;Edited by: user11942774 on Oct 5, 2012 11:46 AM
Edited by: user11942774 on Oct 5, 2012 8:09 PM
Edited by: user11942774 on Oct 5, 2012 8:10 PM -
Link Parameters from Report to Form in Insert Mode
It seems like it should be possible to use the Report wizard to add a link to a form, select some link parameters using the Edit Link function, and then when one clicks on the link it would open the form in insert mode with the link parameters filled in as defaults. Instead what happens is it tries to open the form in update mode with a row that matches the link parameters, and if it can't find a match it opens in insert mode with no parameters filled in. I want it to always open in insert mode and with the passed parameters filled in.
I've looked through all the documentation I have access to and have been through all the Portal FAQ's on OTN and can find nothing on this. There were a few questions in the FAQ's that told how to do it in PL/SQL, but I don't know how to get access to which instance of the link was selected by the user through PL/SQL, and it seems like there should be a way to do this from within the report wizard.
Any help you can give me would be greatly appreciated.
Best Regards,
Jim BladenIf your report is created using ‘Reports From SQL Query’ then you can modify it using the following to achieve this:
1. Remove the link from ‘Column Formatting’ section of the report object.
2. In the SQL of the report , use custom link to the column where you want to provide link using the syntax
select a.empno,’‘||a.ename||’‘ ename_link,a.deptno
from scott.emp a
Order by a.empno
and the form will always open in ‘INSERT’ mode with passed values filled in.
Thanks
Krishnamurthy -
Hi
When drag and drop data control block as ADF form, its be as update mode (display data in text), i need to be in empty form to insert new record, how can i do that?
Regardjava.lang.NullPointerException
at oracle.adf.model.binding.DCIteratorBinding.executeQueryIfNeeded(DCIteratorBinding.java:2128)
at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3126)
at oracle.adf.model.binding.DCBindingContainer.refreshControl(DCBindingContainer.java:2823)
at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2809)
at oracle.adfinternal.controller.util.model.DataBindingActivityImpl.beforeExecute(DataBindingActivityImpl.java:108)
at oracle.adfinternal.controller.engine.ControlFlowEngine.executeActivity(ControlFlowEngine.java:969)
at oracle.adfinternal.controller.engine.ControlFlowEngine.doRouting(ControlFlowEngine.java:878)
at oracle.adfinternal.controller.engine.ControlFlowEngine.doRouting(ControlFlowEngine.java:777)
at oracle.adfinternal.controller.engine.ControlFlowEngine.invokeTaskFlow(ControlFlowEngine.java:242)
at oracle.adfinternal.controller.application.RemoteTaskFlowCallRequestHandler.invokeTaskFlowByUrl(RemoteTaskFlowCallRequestHandler.java:99)
at oracle.adfinternal.controller.application.RemoteTaskFlowCallRequestHandler.doCreateView(RemoteTaskFlowCallRequestHandler.java:64)
at oracle.adfinternal.controller.application.BaseRequestHandlerImpl.createView(BaseRequestHandlerImpl.java:57)
at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.createView(ViewHandlerImpl.java:95)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._restoreView(LifecycleImpl.java:572)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:280)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) -
9i form gen : hangs when using object libraries
9i form gen seems to hang (no progress, pegs the CPU) when specifying any object library. I thought that perhaps the OFGSTND1.OLB hadn't been recompiled for forms 9, but even after recompilation it happens. I have double checked paths, etc. (the generator refers to the right .olb just before hanging...)
Anyone else experienced this or have a workaround?Hi Trevor,
I tried generating a Form base don EMP Table with Object library Ofgstnd1.olb.It worked fine.Can you try and generate the form without any library attachement and see if it is hanging still or not.Because there seems to be no problem with the object library.Do tell me if you can generate the form easily without attachement.
Thanks
Vishal -
Forms hang when it call reports
Hi there,
In a one of my forms, there is button call report
the report object property like following:
name: report17
filename: f:\ora9ias_bi\reports\report11.rdf
execution mode: batch
communication mode:synchronous
report destination type:cache
report destination format:html
report server : repserver90
the trigger for the button is
eclare
report_id report_object;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
begin
report_id:=FIND_REPORT_OBJECT('report17');
v_rep:=RUN_REPORT_OBJECT(report_id);
rep_status:=REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in('RUNNING','OPENNING_REPORT','ENQUEUED')
LOOP
rep_status := REPORT_OBJECT_STATUS(v_rep);
end loop;
if rep_status = 'FINISHED'or rep_status IS NULL THEN
WEB.SHOW_DOCUMENT('HTTP://watfapp2.wat.michelin.com:7778/reports/
rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
else
message('Error when running report');
end if;
end;
when I click the button, the forms hangs for very long time.
Could you please shed some light on it? thanks in advance
Lionel liuI change trigger like the following
eclare
report_id report_object;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
begin
message('before find');
report_id:=FIND_REPORT_OBJECT('report17');
message('before run');
v_rep:=RUN_REPORT_OBJECT(report_id);
message('after run');
WEB.SHOW_DOCUMENT('HTTP://watfapp2.wat.michelin.com:7778/reports/
rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
rep_status:=REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in('RUNNING','OPENNING_REPORT','ENQUEUED')
LOOP
rep_status := REPORT_OBJECT_STATUS(v_rep);
end loop;
if rep_status = 'FINISHED'or rep_status IS NULL THEN
WEB.SHOW_DOCUMENT('HTTP://watfapp2.wat.michelin.com:7778/reports/
rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
else
message('Error when running report');
end if;
end;
it hang on the command
report_id:=FIND_REPORT_OBJECT('report17');
the reports_classpath in default.env is
REPORTS_CLASSPATH=<ORACLE>/jlib/zrclient.jar;<oralce_home>/reports/jlib/rwrun.jar
What could cause the command report_id:=FIND_REPORT_OBJECT('report17');
hang on?
thanks again
Lionel -
Adding Form for insert into Ext Js Layout
Hi all,
How to adding form for insert record into EMP table
+[http://apex.oracle.com/pls/apex/f?p=43040:7|INSERT EMP]+
into Ext JS layout with one Array Grid report from EMP ?
+[http://apex.oracle.com/pls/apex/f?p=43040:5|ExtJS layout EMP report]+
(this is extend threat from
Re: ExtJS report with JsonStore -examples? apex and extjs grid table]
implements by munky)
regards,
Gordan
Edited by: useruseruser on Aug 3, 2010 9:17 AMHi Gordan
Just for information, the link syntax doesn't work on the forum anymore, just paste the link in with no tags or brackets and it will be 'clickable'.
Exactly what are you trying to achieve here?
Have you had a look at these sites which may be of some use to you...
http://oracleinsights.blogspot.com/ - Mark Lancaster
http://application-express-blog.e-dba.com/ - e-DBA (Matt Nolan)
http://apex-at-work.blogspot.com/ - Tobias Arnhold
Cheers
Ben -
Hashtable for multi part form to insert image and details to database:)
Hey guys do you have any samples on using hashtable in multipart form to insert image as well as details into database?:)
Oh it is because my form is using multipart from that enbales me to upload/Insert image into my database.
Howerver, I also need to insert other details into my database such as productid, ProdName, unitprice.....
Hence, My tutor suggested using hashtable.
However, I do not understnd.
Do you guys have any samples regarding on this?
Thanks
:DCathy_Latte wrote:
However, I do not understnd. More specifically: you do not understand how to use Maps? If so, just go through a book/tutorial on that subject. In fact you should have consulted your tutor or classmates for more information and you're here at a JSP/JSTL forum at the wrong place (you have a problem with Java in general, not with JSP), but OK, here's a link: [http://google.com/search?q=hashmap+tutorial+site%3Asun.com]. -
My iphone 4 is getting stuck during gaming when sim card is inserted. Call anyone help me out to solve this problem?
That doesn't make any sense to me at all, unless the games you're trying to play have some sort of online connection/capability and you're in a weak signal area, thus the games can't make the required online connection. What happens when you turn cellular data off in settings: Settings>General>Network>Cellular Data>Off.
-
Do web deployed forms support insert/replace modes
Hi:
We are currently using Oracle Forms 10g. In older versions of forms the Insert key could be used to toggle between Insert and Replace modes when entering data in a field. Is this functionality supported in Web deployed forms?
ThomasApparently not. See
INSERT key does not toggle INSERT/REPLACE mode
Maybe you are looking for
-
Dear SRM Gurus, While we define SITE in SMOEAC. What should be - RFC destination - FOR BACKEND A) System USER. B) Dialog User. Thanks and Best Regards, ANIL RAJPAL.
-
Process flow execute "complete" in Runtime Audit Browser but it hangs
I create a process flow that contain 4 sub-process flow, each sub-process flow contains several mapping. Each mapping in the process flow will be executed one by one if previous mapping execute successfully. If any error or warning, it will be ended
-
Dear All; I currently have a issue with my iPhoto & iPhone, i apologize if this is the incorrect area for assistance. My iPhoto library has been synced with my iphone all my images/photos are saved onto the phone, but i want to put them back onto my
-
Marks in PSD's when moving edit layers in PS CC
I have just upgraded this evening to PS CC after I upgraded I cannot now move any type without it leaving marks over any images in the PSD file......when I save the file as a jpeg etc the marks are still there. They appear even if the image layer is
-
Do child schema element inherit namespaces of parent?
I have following declaration in my BPEL's wsdl file - <xs:element name="iamcomplex" xmlns:xs="http://www.w3.org/2001/XMLSchema"> <xs:complexType> <xs:sequence> <xs:element name="complexpartone" type="xs:string" /> <xs:element name="complexparttwo" ty