A and PTR records update under zone's folder..

Hi Friends
I have below power shell script which is working fine if I have single zone But I have domain folder in single zone.
I am using below script to add A records and PTR records in zone but This script is not updating A and PTR records on domain folder under the Zone..
$CSVFile = Import-Csv "D:\DNS update script\DNSentries.csv"
$CSVFile | foreach {dnscmd $_.dnsserver /RecordAdd $_.Zone $_.name /CreatePTR $_.type $_.IP}
It giving me below error:
Command failed: DNS_ERROR_ZONE_DOES_NOT_EXIST 9601 0x2581

Try this:
$csvfile | foreach {
If ($_.zone -match "\.") {
$Domain = $_.zone
dnscmd $_.dnsserver /RecordAdd $_.Zone $_.name /CreatePTR $_.type $_.IP
} Else {
dnscmd $_.dnsserver /RecordAdd $Domain "$($_.name).$($_Zone)" /CreatePTR $_.type $_.IP
Please note the format of the child domain and host name in this command, and that the root domain is collected from the first record that has a . in it.  If your file isn't organized correctly, this won't work.  You could add a command to get
the server's root domain, there are a lot of ways to do that but I didn't spend time on that.  You could also just hard code that since I'm guessing you're working within one DNS hierarchy.  
I did test this and it worked - the key is in the 2nd command, it needs to be in the form of 
dnscmd DNSServer /RecordAdd RootDomain HostName.ChildDomain /CreatePTR A 1.2.3.4
Good luck, hope this helps!

Similar Messages

  • Why are the date and time not updating in backups.backupdb folder?

    I just started using Time Machine on my early 2011 MacBook Pro running 10.7.2. After the initial full back-up and first few updates, the backup folder (on an external 1.5 TB Firewire drive) continues to show the original "date modified" of the very first back-up and lists the size as a ridiculous 2.48 GB. (Using BackupLoupe, I know it actually is 280 GB, reflecting the size of my internal HD). Any idea why this folder's info is not updating in the finder (even using "Get Info")? Are my back-ups really there? (It certainly seems so according to BackupLoupe).

    First, the best way to view or restore from your backups is via the Time Machine display, per Time Machine - Frequently Asked Question #15.  Using the Finder is not recommended.
    Do not worry about the dates.  First, the date modified only applies to the "parent" folder; that's not the Backups.backupdb folder, but the one inside it that's named for your Mac.
    Don't worry about the sizes, either.  On Leopard and Snow Leopard, the size of a backup folder was the total size of all the items that were on your Mac at the time of that backup (less exclusions).  On Lion, however, it's the "unique size" -- the size of items that appear only on that backup.

  • On my iPad 2, Newsstand is displaying a round red "1" badge. I've looked at and tried to update everything in the folder, but the "1" badge won't go away. Any suggestions? Thanks.

    "Newsstand" displays a round red "1" badge. I've checked everything in the folder; everything appears up to date. Any suggestions what else might be generating the "1" badge, and/or how I can clear it?
    Thanks

    Open each magazine one at a time.  One of them is trying to get you to update, buy a new subscription, or restore an earlier issue.  It may even be tied to a publication you have deleted.  I hate those things.

  • Help! I was trying to delete a folder and it got stuck under the documents folder on sidebar...

    ...how do i move it? MacBook Air 11 inch 10.7.3

    Sorry, I'm not sure what you mean. Can you post a screen shot?

  • Windows 2012 adds an incorrect name when creating a PTR Record in a /56 reverse zone using MMC

    Hello,
    I have created a reverse lookup zone for 2001:bc8:3f83:0200::/56, when I add a PTR record for 2001:bc8:3f83:0200::200:99, the MMC snap-in adds a zero group in my address and adds a record for 2001:bc8:3f83:0200:0000:0000:0000:200:99.
    Zone creation :
    http://imageshack.com/a/img673/4018/JFf7BX.jpg
    PTR creation :
    http://imageshack.com/a/img538/9239/bZqaQl.jpg
    Result :
    a PTR with address 2001:bc8:3f83:0200:0000:0000:0000:200:99 :
    http://imageshack.com/a/img673/8793/3EcxOW.jpg
    (Sorry for the image links, the forum would not allow me to post images...)

    Hi,
    According to your description, my understanding is that the name of PTR record(IPv6) displayed as 2001:bc8:3f83:0200:0000:0000:0000:200:99, but when open its Properties, the Host IP address option displayed as 2001:bc8:3f83:0200:0000:0000:200:99.
    I have the similar problem on my test device Windows Server 2012, but this problem do not occurred on Windows Server 2012 R2. They have different ways to type the Host IP address. And it is may be related to the prefix digit number – not the integer multiple
    of 16.
    You may try to update your server to the latest version. Or a work around way to manually add the PTR record of IPv6 by command line:
    dnscmd <ServerName> /RecordAdd <ZoneName> <NodeName> [/Aging] [/OpenAcl] [<Ttl>] PTR <HostName>|<DomainName>
    Detailed information reference link:
    https://technet.microsoft.com/en-us/library/cc844045(v=ws.10).aspx
    Best Regards,
    Eve Wang
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Child DNS Zone changing PTR record of OD Master

    Grretings,
    I am setting up a new OD master server for our school that will also host our DNS. Home folders will be on another server. I am using the DNS GUI for now. Setup master DNS zone of ourschool.lan. OD master has FQDN of admin.ourschool.lan with an IP address of 172.16.2.254. Forward and reverse lookups of OD master are great.
    #host admin.ourschool.lan returns 172.16.2.254
    #host 172.16.2.254 returns admin.ourschool.lan
    When I go to set up a child zone, highschool.ourschool.lan, on this server I set the nameserver to ns1.highschool.ourschool.lan and IP address of 172.16.2.254, I have had the following happen:
    #host admin.ourschool.lan returns 172.16.2.254
    #host 172.16.2.254 returns ns1.highschool.ourschool.lan (not what I want!)
    I understand forward and reverse lookups to OD master need to be rock solid. The changing of the PTR record is going to ruin this. Has anyone else seen this behavior. Should I just do the DNS through terminal and forget the GUI?
    Thank you for any feedback. I searched this discussion list and didn't find anything similar to this in the postings.
    Best Regards,
    Steve
    OS X Server and Client   Mac OS X (10.4.6)  

    Your problem stems from the fact you're trying to create two separate A records for the same IP address.
    The GUI will automatically create a reverse DNS entry for each a record. Since you have two A records that point to 172.16.2.254 that's where your problem lies.
    Your solution is either to use a CNAME (or alias) for the second hostname (e.g. ns1.highschool.ourschool.lan CNAME admin.ourschool.lan), or manage the DNS by hand and don't use the GUI tools.

  • I am making an iMovie trailer on my iPad 3(updated) and I recorded a few clips on my iPad Camera but they are not being detected on the iMovie Videos section. How can I make them show up?

    I am making an iMovie Trailer on my iPad 3 (updated) and I recorded a few clips using my iPad Camera but they are not being detected on the iMovie Videos scetion. How can I make them appear so I can use them in my trailer?

    Hi Stuck-in-NY,
    If you are looking to transfer your purchases to your computer, you may find the following article helpful:
    Apple Support: Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/HT2519
    Regards,
    - Brenden

  • Outgoing server settings entered correctly but will not update and tries to send under old settings

    I can receive all of my emails correctly but can not send any emails. I have set up under a different program and it works fine. I have tried to update thunderbird by its settings and it does not provide any options?? I am running ubuntu 14.04lts.
    My outgoing mail settings are correct but when thunderbird tries to send it uses old settings and does not update to the new mail server.
    https://app.box.com/s/i27ulu2zq53iaq444boxoo7dp047qgyt
    https://app.box.com/s/ivujudbq64mp8e5fd0pzkv5yt724bzta
    https://app.box.com/s/zwj25bxv10sad27fcuov2ters23lcvu8
    Thanks in advance

    Application Basics
    Name: Thunderbird
    Version: 31.4.0
    User Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.4.0
    Profile Directory: Open Directory
    (Unknown location)
    Application Build ID: 20150112185638
    Enabled Plugins: about:plugins
    Build Configuration: about:buildconfig
    Memory Use: about:memory
    Mail and News Accounts
    account2:
    INCOMING: account2, , (none) Local Folders, plain, passwordCleartext
    account3:
    INCOMING: account3, , (imap) imap.netregistry.net:993, SSL, passwordCleartext
    OUTGOING: smtp.netregistry.net:465, SSL, passwordCleartext, true
    account5:
    INCOMING: account5, , (imap) imap.netregistry.net:993, SSL, passwordCleartext
    OUTGOING: smtp.netregistry.net:465, SSL, passwordCleartext, true
    account6:
    INCOMING: account6, , (imap) imap.netregistry.net:993, SSL, passwordCleartext
    OUTGOING: smtp.netregistry.net:465, SSL, passwordCleartext, true
    account7:
    INCOMING: account7, , (imap) imap.netregistry.net:993, SSL, passwordCleartext
    OUTGOING: smtp.netregistry.net:465, SSL, passwordCleartext, true
    account9:
    INCOMING: account9, , (pop3) mail.crochead.com:110, plain, passwordCleartext
    OUTGOING: mail.crochead.com:465, SSL, passwordCleartext, true
    account10:
    INCOMING: account10, , (imap) imap.crochead.com.au:143, alwaysSTARTTLS, passwordEncrypted
    OUTGOING: smtp.netregistry.net:465, SSL, passwordCleartext, true
    account11:
    INCOMING: account11, , (imap) mail3.bigcommerce.com:993, SSL, passwordCleartext
    OUTGOING: mail3.bigcommerce.com:587, alwaysSTARTTLS, passwordEncrypted, true
    Crash Reports
    Extensions
    Enigmail, 1.7.2, true, {847b3a00-7ab1-11d4-8f02-006008948af5}
    Lightning, 3.3.4, true, {e2fda1a4-762b-4020-b5ad-a41df1933103}
    Messaging Menu and Unity Launcher integration, 1.3.1, true, [email protected]
    Provider for Google Calendar, 0.32, true, {a62ef8ec-5fdc-40c2-873c-223b8a6925cc}
    Important Modified Preferences
    Name: Value
    browser.cache.disk.capacity: 204800
    browser.cache.disk.smart_size_cached_value: 358400
    browser.cache.disk.smart_size.first_run: false
    browser.cache.disk.smart_size.use_old_max: false
    extensions.lastAppVersion: 31.4.0
    general.autoScroll: true
    mail.openMessageBehavior.version: 1
    mailnews.database.global.datastore.id: 912c1d9f-f79f-4a8b-9bf5-5c273fa7a3c
    mailnews.database.global.indexer.enabled: false
    mailnews.database.global.views.conversation.columns: {"threadCol":{"visible":true,"ordinal":"1"},"flaggedCol":{"visible":true,"ordinal":"3"},"attachmentCol":{"visible":false…
    network.cookie.cookieBehavior: 2
    network.cookie.prefsMigrated: true
    places.database.lastMaintenance: 1424651152
    places.history.expiration.transient_current_max_pages: 104858
    plugin.importedState: true
    print.print_bgcolor: false
    print.print_bgimages: false
    print.print_colorspace: default
    print.print_downloadfonts: false
    print.print_evenpages: true
    print.print_in_color: true
    print.print_margin_bottom: 0.5
    print.print_margin_left: 0.5
    print.print_margin_right: 0.5
    print.print_margin_top: 0.5
    print.print_oddpages: true
    print.print_orientation: 0
    print.print_page_delay: 50
    print.print_paper_data: 0
    print.print_paper_height: 279.40
    print.print_paper_name: na_letter
    print.print_paper_size_type: 1
    print.print_paper_size_unit: 1
    print.print_paper_width: 215.90
    print.print_plex_name: default
    print.print_resolution_name: default
    print.print_scaling: 1.00
    print.print_shrink_to_fit: true
    print.print_to_file: false
    print.print_unwriteable_margin_bottom: 56
    print.print_unwriteable_margin_left: 25
    print.print_unwriteable_margin_right: 25
    print.print_unwriteable_margin_top: 25
    privacy.donottrackheader.enabled: true
    security.disable_button.openCertManager: false
    security.disable_button.openDeviceManager: false
    Graphics
    Adapter Description: X.Org -- Gallium 0.4 on AMD KABINI
    Vendor ID: X.Org
    Device ID: Gallium 0.4 on AMD KABINI
    Driver Version: 3.0 Mesa 10.1.3
    WebGL Renderer: false
    GPU Accelerated Windows: 0
    AzureCanvasBackend: cairo
    AzureSkiaAccelerated: 0
    AzureFallbackCanvasBackend: none
    AzureContentBackend: cairo
    JavaScript
    Incremental GC: 1
    Accessibility
    Activated: 0
    Prevent Accessibility: 0
    Library Versions
    Expected minimum version
    Version in use
    NSPR
    4.10.6
    4.10.6
    NSS
    3.16.2.3 Basic ECC
    3.16.2.3 Basic ECC
    NSS Util
    3.16.2.3
    3.16.2.3
    NSS SSL
    3.16.2.3 Basic ECC
    3.16.2.3 Basic ECC
    NSS S/MIME
    3.16.2.3 Basic ECC
    3.16.2.3 Basic ECC

  • After updating to iOS 5.0.1 my iphone 4 is frozen on the screen with the apple logo and a progress bar under it. What should i do?

    After updating to iOS 5.0.1 my iphone 4 is frozen on the screen with the apple logo and the progress bar under it. Held the power and home button, the phone shut off, and restarted the progress. If i try to turn the phone on, it keeps telling me to connect to iTunes. Once I do, it asks me to restore, i click restore, but it keeps on freezing at the screen. What is the problem? Error 1603 comes up. Followed the link to apple's page but nothing that was said there worked.

    See Here for
    Unable to Update or Restore
    http://support.apple.com/kb/HT1808

  • My MacBook Pro shows the logo in a white screen when I ask for a Software Update under the apple. Actually it stays blank on Featured, Top Charts, Categories and Purchases as well. What up? Thanks.

    My MacBook Pro shows the logo in a white screen when I ask for a Software Update under the apple. Actually it stays blank on Featured, Top Charts, Categories and Purchases as well. What up? Thanks.

    I am having exactly the same problem right now. After some research, it looked like my HD was toast. I replaced it today, that part was easy, but now I cannot seem to use my original Install Disk to format the new HD. I get a grey restart screen, or if I get to the Language Selection screen, my cursor is frozen in left corner and I can't use it.
    Very frustrating, hope someone else has some ideas!
    PS My MacBook was about same age, and "expired" in exactly the same way as yours.

  • Check each and every record during update/delete

    Hi,
    I have forms 10g I made one tabuler form and want to apply certain restrictions like after two days update or deletes are not allowed how can I check this for each and every record in tabuler form during updation/deletion.
    2- If the record does not meet my criteria how can I skip saving/updating record.
    Thanks in advance.
    Khawar
    Message was edited by:
    S. Khawar

    As you already storing the data for created date/time, it’s quite easy now to check date/time before deleting or updating
    Need 2 triggers to write on the specific block.
    1)     PRE-INSERT
    2)     PRE-DELETE
    The Trigger code as follows in both triggers
    Declare
         No_Days Number;
    Begin
         Select Nvl(Trunc (Sysdate - Created_datetime),0)
         Into No_Days
         From <Table Name>
         Where :<Form Column Name> = <DB Column Name>
    If No_Days >= 2 then
    Raise Form_Trigger_Failure;
    End If;
    End;
    Cheers
    Ayaz

  • SAPF150D-Dunning Notice Print - With Update of Line Items and Master Record

    When I am running this program SAPF150D(Dunning Notice Print - With Update of Line Items and Master Records) with a variant containing run date, runc id, update mode, pimmed & pcount; the job is failing to execute. It is giving message like,
    "The field symbol is no longer assigned because there was an attempt makde previously in a Unicode program to set the field symbol using ASSIGN with offset and/or length specification. Here, the memory addressed by the offset/length specification was not within the allowed area."
    "GETWA_NOT_ASSIGNED_RANGE" "SAPF150D" or "F150DFS0" "SORTFELDER_ERMITTELN"

    Hi,
    Search for routine FORM SORTFELDER_ERMITTELN
    in SAPF150D.
    Put a breakpoint in statement
    ASSIGN (T047F-FELDN) TO <H1>.
    in above routine and debug to the point where error is occuring.
    Most likely there is a mismatch in the length assigned to some field FELDN in table T047F.
    In that case, simply change the T047F-LENGT field accordingly in change mode.
    Cheers,
    Vikram
    Edited by: Vikram Jalali on May 27, 2008 5:56 PM

  • Manage SCUP published updates under WSUS and SCCM.

    After completion of SCUP environment, I published Adobe Flash player update successfully.
    Some where in blogs it was mentioned that published updates are under 'software library' but under SCCM2007 SP2 I am able to see 'software update' and there are no entry of published updates. Under 'software update' there is only Microsoft vendor and no updates
    under same.
    Also, there is no entry about Adobe updates in WSUS, only Micosoft specific updates are present as per sync.
    environment details:
    SCUP 2011
    WSUS on Win 2008 R2 Server
    SCCM 2007 SP2
    SQL Server 2008 R2
    Please let me know how can I view & manage published updates under SCCM and WSUS.
    Below are logs entry specific to SCUP:
    Publications workspace: Remove selected updates from publication AdobeFlashPlayer$$<Updates Publisher><Tue Feb 24 12:48:28.584 2015.1><thread=1>
    Publications workspace: Starting publish wizard for publication 'AdobeFlashPlayer'.$$<Updates Publisher><Tue Feb 24 12:48:33.573 2015.1><thread=1>
        Publish: Preparing list of selected updates for publishing.$$<Updates Publisher><Tue Feb 24 12:48:37.587 2015.12><thread=12>
        Connecting to a local update server with locally detected settings.$$<Updates Publisher><Tue Feb 24 12:48:37.588 2015.12><thread=12>
        Publish: Update server name: WIN2008R2DC$$<Updates Publisher><Tue Feb 24 12:48:37.610 2015.12><thread=12>
        Publish: Publish operation starting for 1 updates.$$<Updates Publisher><Tue Feb 24 12:48:37.611 2015.12><thread=12>
        Publish: Publish: Verifying update server is configured with a certificate prior to publishing.$$<Updates Publisher><Tue Feb 24 12:48:37.614 2015.12><thread=12>
        Publish: Publish: Update server appears to be configured with a certificate.$$<Updates Publisher><Tue Feb 24 12:48:37.656 2015.12><thread=12>
        Building dependency graph for update 'Adobe Flash Player 32-bit/64-bit Plugin 16.0.0.305 (UpdateId:'a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4' Vendor:'Adobe Systems, Inc.' Product:'Adobe Flash Player')'$$<Updates Publisher><Tue Feb 24
    12:48:37.687 2015.12><thread=12>
        No dependencies found for update 'Adobe Flash Player 32-bit/64-bit Plugin 16.0.0.305 (UpdateId:'a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4' Vendor:'Adobe Systems, Inc.' Product:'Adobe Flash Player')'$$<Updates Publisher><Tue Feb 24 12:48:37.717
    2015.12><thread=12>
    Found total of 0 dependencies (may include duplicates).$$<Updates Publisher><Tue Feb 24 12:48:37.717 2015.12><thread=12>
    PublishItem: Update ''Adobe Flash Player 32-bit/64-bit Plugin 16.0.0.305 (UpdateId:'a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4' Vendor:'Adobe Systems, Inc.' Product:'Adobe Flash Player')'' has no dependencies.$$<Updates Publisher><Tue Feb 24 12:48:37.718
    2015.12><thread=12>
    PublishItem: Publishing update 'Adobe Flash Player 32-bit/64-bit Plugin 16.0.0.305 (UpdateId:'a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4' Vendor:'Adobe Systems, Inc.' Product:'Adobe Flash Player')'.$$<Updates Publisher><Tue Feb 24 12:48:37.718 2015.12><thread=12>
    PublishItem: --- Evaluating software update 'Adobe Flash Player 32-bit/64-bit Plugin 16.0.0.305 (UpdateId:'a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4' Vendor:'Adobe Systems, Inc.' Product:'Adobe Flash Player')' for publishing as FullContent.$$<Updates Publisher><Tue
    Feb 24 12:48:37.719 2015.12><thread=12>
    PublishItem: --- Software update 'Adobe Flash Player 32-bit/64-bit Plugin 16.0.0.305 (UpdateId:'a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4' Vendor:'Adobe Systems, Inc.' Product:'Adobe Flash Player')' needs to be published with full content.$$<Updates Publisher><Tue
    Feb 24 12:48:37.732 2015.12><thread=12>
    PublishItem: Retrieving content for update 'Adobe Flash Player 32-bit/64-bit Plugin 16.0.0.305 (UpdateId:'a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4' Vendor:'Adobe Systems, Inc.' Product:'Adobe Flash Player')'.$$<Updates Publisher><Tue Feb 24 12:48:37.756
    2015.12><thread=12>
    PublishItem: --- Content will be saved to C:\Users\Administrator\AppData\Local\Temp\2\\kzfk4dzk.yiy\install_flash_player_16_plugin.msi.$$<Updates Publisher><Tue Feb 24 12:48:37.757 2015.12><thread=12>
    PublishItem: Download Content: file was downloaded successfully.$$<Updates Publisher><Tue Feb 24 12:48:57.68 2015.12><thread=12>
    PublishItem: Successfully retrieved content for software update 'Adobe Flash Player 32-bit/64-bit Plugin 16.0.0.305 (UpdateId:'a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4' Vendor:'Adobe Systems, Inc.' Product:'Adobe Flash Player')' to local file: C:\Users\Administrator\AppData\Local\Temp\2\\kzfk4dzk.yiy\install_flash_player_16_plugin.msi$$<Updates
    Publisher><Tue Feb 24 12:48:57.69 2015.12><thread=12>
    File C:\Users\Administrator\AppData\Local\Temp\2\\kzfk4dzk.yiy\install_flash_player_16_plugin.msi appears to be signed, retrieved certificate, checking signature...$$<Updates Publisher><Tue Feb 24 12:48:57.204 2015.12><thread=12>
    TrustChecker: User trusts file.$$<Updates Publisher><Tue Feb 24 12:51:30.548 2015.1><thread=1>
    PublishItem: --- SDP XML file for publishing created at C:\Users\Administrator\AppData\Local\Temp\2\tmp182E.tmp$$<Updates Publisher><Tue Feb 24 12:51:30.640 2015.12><thread=12>
    PublishItem: --- Calling update server API for publishing update 'Adobe Flash Player 32-bit/64-bit Plugin 16.0.0.305 (UpdateId:'a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4' Vendor:'Adobe Systems, Inc.' Product:'Adobe Flash Player')'$$<Updates
    Publisher><Tue Feb 24 12:51:30.752 2015.12><thread=12>
    PublishItem: --- PublishPackage call successful for update 'Adobe Flash Player 32-bit/64-bit Plugin 16.0.0.305 (UpdateId:'a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4' Vendor:'Adobe Systems, Inc.' Product:'Adobe Flash Player')'$$<Updates Publisher><Tue
    Feb 24 12:51:59.290 2015.12><thread=12>
    PublishProgress: Publish operation completed.$$<Updates Publisher><Tue Feb 24 12:51:59.305 2015.12><thread=12>
    Publish: Background processing completed.$$<Updates Publisher><Tue Feb 24 12:51:59.306 2015.1><thread=1>
    WizardBase: closing Publish Software Updates Wizard wizard.$$<Updates Publisher><Tue Feb 24 12:55:37.211 2015.1><thread=1>
    Publications workspace: Publish wizard completed.$$<Updates Publisher><Tue Feb 24 12:55:37.234 2015.1><thread=1>
    I verified SCCM primary site but not able to trace published updates here. Please let me know how can I see published updates and how can I manage them as well.
    Thanks in advance!!!

    what does wsyncmgr.log,wsuscontrol.log and WCM.log says ? do they have any adobe related entries ? check if the published adobe products appearing in software update classification ?
    Eswar Koneti | Configmgr blog:
    www.eskonr.com | Linkedin: Eswar Koneti
    | Twitter: Eskonr

  • HT4623 I'm trying to upgrade an ipad and in the system under general there is no software update.  What do I do?

    I'm trying to upgrade an ipad and in the system under general there is no software update.  What do I do?

    The Settings > General > Software Update option only appears when you have iOS 5+ installed, if you have iOS 4 then you will need to do the update via your computer's iTunes.
    Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
    Then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button
    Updating to iOS 5+ : http://support.apple.com/kb/HT4972
    With iOS 6 you will lose the built-in YouTube app and the Maps app will change

  • Creating Update and deleting Records Forms

    Hi Guys
    Hopefully some one can help me with this, I am using php and
    mysql, I already have a page that shows all the records of
    customers details, which I can navigate through the pages of
    records.
    I have created a update page, using the update wizard, which
    works but only shows the first record. I have added a repeat region
    and page navigation which allows me to choose individual records
    but wont update those records.
    I also took a look at a tutorial video that had you adding an
    extra column and add the word update to add a hyperlink that took
    you to the update form with that particular record for updating,
    the video was using cold fusion the link was update page address
    then this ?ID=#ID#, I tried different versions of this with no
    success.
    I also tried to alter the record set and added a filter using
    Member_ID and = paramater URL, this made my cusomter detail page
    stop working.
    can some one help please
    Cheers
    Mark

    burkeslaw wrote:
    > Is it that I have to create the update form manually and
    then select it and
    > add the update form behaviour? Is there an Go to
    Detailed Page server behaviour
    > for php, or is this just for ASP technology.
    I'm not familiar with the ASP server behaviors, but there is
    a Master
    Detail Page Set for PHP (it's on the Insert > Data Objects
    menu).
    Creating an update page is very easy.
    1. Create a page that lists all records in the database.
    2. Alongside each record, create a link to the update page.
    3. When creating the link, click the Parameters button inside
    the Select
    File dialog box.
    4. In the Name field of the Parameters dialog box, type the
    name of the
    primary key (ID).
    5. Click the lightning bolt icon to the right of the Value
    field, and
    select the primary key from the recordset.
    6. Click OK twice to close both dialog boxes.
    7. Save the page and test it in a browser. When you mouse
    over each
    link, it should display a URL that looks something like this:
    update.php?id=3. The name/value pair after the question mark
    pass the
    details of the record as a URL parameter to the update page.
    8. In the update page, create a recordset that uses the URL
    parameter as
    a filter to select a single record depending on the value
    sent from the
    previous page.
    9. In the update page, create a hidden field to store the ID
    from the
    recordset (click the lightning bolt icon alongside the Value
    field to
    insert the dynamic data).
    10. Apply an Update Record server behavior. Make sure the
    primary key
    gets its value from the hidden field in the form.
    Alternatively, if you don't want to build your own update
    form, replace
    steps 9 and 10 by using the Record Update Form Wizard (Insert
    > Data
    Objects > Update Record > Record Update Form Wizard).
    David Powers
    Adobe Community Expert, Dreamweaver
    http://foundationphp.com

Maybe you are looking for