A good news for MPC 865 PRO users

the original thread was posted on MSI chinese forum,one guy said he want to buy a tv tuner card for his 865 pro,since the card is not on sale now,MSI CHINA gave him a beta card,and he found the beta card was WINFAST TV 2000!!!! i don't know if it was true that tv2000 can be used on 865 pro(both PC and instantON mode) because i don't have 865 pro and tv2000 card,but who have 865 pro should have a try,tv 2000 is not expensive as MSI's original card,in china,tv 2000 only cost 200 rmb(about 25 dollars)

Hello there, I'm from Indonesia, I've just bought MEGAPC 865 PRO about a week ago. My system using Winfast TV2000XP expert edition from Leadtek, as this card is the only type recommended by MSI distributor in my country. It's true that this tv tuner works, but I've found some malfunctions while using TV program with instant-on.
1) When using 'antenna' option as tv source, each channel scanned will result in good picture but the voice sound robotic (unclear). I changed the tv source using cable-tv line, the channel will resulted in good picture and sound, but I've lost some channels. Cable-tv program supposed to be 16 channels, while using 'antena' option in tv source I received only 10 channels and using 'cable' option I received only 11 channels. So where the rest of the channels go?
2) The tv mode on instant on built with 'program saving' where you can save your favorite channel, however you can't sort which channel that you want to save.
3) The FM radio does not works.
4) No user guide/manual for instant-on
Fortunately, all of the above problems not existed if you are running in Windows XP mode, and the TV performance is much better (better picture and sound). The sad thing is, I feel like paying too much for instant-on capabilities.
I've contacted the local MSI customer support but they claimed that the problem didn't occured while they're doing my system set up. But they have forward my complain to MSI's head office. I've also send an e-mail to MSI customer support but it's been a week and they are not replying yet.
If you have tried Winfast TV 2000 and not experiencing the same way as I do, please let me know. Perhaps I should change or update my system setting?

Similar Messages

Good News For K8N Neo Platinum Users!!!

Ok, after fiddling with my BIOS for almost 2 days now, and scanning the forums for a solution, I contacted MSI Technical Support in California, USA. They are sending me a new BIOS chip, free of charge, so anyone having a severe problem with BIOS revisions 1.8 and 1.9 on the K8N Neo Platinum (MS-7030) please give tech support a call, I let them know I would be posting this in the forum and they will be inandated with phone calls, but woohoo, they are sending a new chip pre-flashed with BIOS revision 1.7.
Please refer to this thread for the reasons why:BIOS v1.9 Is Terrible

What good news? UK based MSI did not offer any such replacement bios after my problems updating to 1.8 bios.
I purchased a new bios chip with 1.9 bios from a UK supplier.....after fitting the bios I returned to the same problems as before, failure to boot past post and freezing in bios menu. I then remembered another post on this sight and removed one stick of memory......everything back to normal .I have just fitted a 1gb Corsair cas 2 memory and all seems well I will save my 2X 512 Corsair XL my next project which will not be a MSI Motherboard
MSI UK have not come out of this very well and from the posts that I have read there are quite a few people out there with problems. Many thanks to all those who posted on this, it certainly helps to know that you are not the only one with problems.
MSI K8N Neo ...AMD 3400 Newcastle
Zalman Cooller CNPS7000A
1 X 1Gb Corsair 3200C2PT
Gainward 6600GT Golden Sample GLH
550W Enermax Power Pack(EG651P-VE)
Sound Blaster Audigy
Seagate 300 Gb Hard Drive

GOOD NEWS FOR WIN 7 Home Premium USERS....

Hi Pals...
This is good news for all windows 7 users that can install DEVICE UPDATE SOFTWARE in Windows 7 Home Premium, here i can explain that how to install DEVICE UPDATE SOFTWARE in Windows 7...
1. Download DEVICE UPDATE SOFTWARE from http://nds1.nokia.com/files/support/global/phones/software/NokiaSoftwareUpdaterSetup_en.exe
2. Right click on that installer file and select PROPERTIES and then select COMPATIBILITY then CHECK the box on
COMPATIBILITY MODE then browse the list and select WINDOWS VISTA SERVICE PACK 2 (if service pack 1 then select 1) and then click on OK... Thats it ur ready to install DEVICE UPDATE SOFTWARE in Windows 7....
Note : This is my own trick and this trick is success, B'cas i m hardware engineer and i knw this tric is not harmfull to any pc or laptops/notebook , so do it this all above step without fear TRUST ME PALS.. Lets enjoy.... THx
Message Edited by kamlesh_sexy on 12-Jan-2010 04:28 PM

No is does not work, it gets installed. But does not work. When we click on the installed NSU.
The Nokia startup screen stays on and nothing happens.
Please do not give wrong trick.
I have tried it on Win 7 (Prof & Ultimate) Same problem, i have tired on 2 diffrent systems.
nokia will be coming out with new NSU 2.4.2 soon, Kindly do wait for it.

Provide Feedback for the Logic Pro User Manual and Onscreen Help Here

The Apple documentation team for Logic Pro would like to know what you think about the Logic Pro Help documentation (available in the Help menu):
• How often do you use Logic Pro Help? Under what circumstances do you use it most?
• Do you use the printed manual or the onscreen help more? Which one do you prefer?
• How do you find what you're looking for in Logic Help: table of contents, index, skimming, PDF links, PDF search?
• What do you like about the Logic help?
• What would you like to see us improve? What is missing?
• What needs more in-depths coverage in the Logic help?
• In learning Logic, did you use the Logic Getting Started Guide? If so, do you feel the book provided a good introduction to the application? Is there anything you can think of that would make the Getting Started Guide more helpful to you? Did you use the tutorial song that accompanies the Getting Started guide?
• What are the most important concepts/features a new user has to understand to get started with Logic?
• By what method do you ususally learn a new application? For example: provided manuals, third-pary tutorials or books, training classes?
• Are there any particular examples of manuals or online help that you consider to be good models for the Logic Pro manual and onscreen help?
• What do you think is the most difficult feature/concept to grasp in Logic Pro?
• What's the most frustrating experience you've had with the Logic Pro documentation?
• Are there any other methods of delivery or media you think we should explore?
• What size of computer display do you typically use to view the onscreen help? For example: 12, 15, 17, 20, 23, or 30-inch?
• What resolution is the computer display set to when viewing Onscreen Help? For example: 1024 x 768, 1280 x 854, or 1920 x 1200 pixels?
• Do you use multiple computer displays?

• How often do you use Logic Pro Help? Under what
circumstances do you use it most?
I use it often. not everyday, but there is always some little command or procedure that you can't remember
• Do you use the printed manual or the onscreen help
more? Which one do you prefer?
I use them both, but the onscreen help a little more often. Some times I like to walk away from the computer and sit on the couch and read the manual, just to have a change of scenery
• How do you find what you're looking for in Logic
Help: table of contents, index, skimming, PDF links,
PDF search?
Table of contents and search
• What do you like about the Logic help?
It's right there on the computer, and being able to search by key words
• What would you like to see us improve? What is
missing?
I think real time animation would be real cool but I doubt that is practical
• What needs more in-depths coverage in the Logic
help?
Things that Logic has and you won't find in other programs, like explaining the environment in more detail. how to make better use of transformers. The Transform window could be explained more clearly.
• In learning Logic, did you use the Logic Getting
Started Guide? If so, do you feel the book provided a
good introduction to the application? Is there
anything you can think of that would make the Getting
Started Guide more helpful to you? Did you use the
tutorial song that accompanies the Getting Started
guide?
I didn't use it, although it looks great, I went right into the reference manual. I did look at the tutorial song, which was nice cause it gave me some hands on experience with moving things around
• What are the most important concepts/features a new
user has to understand to get started with Logic?
Logic is different that other DAW's. Logic's way of doing things may seem real strange to someone who came from using another program. as I said before, spend more time on things that are only found in Logic, like the environment. It really frightens some people.
Many of the questions here in this forum are midi related. people seem to be having a real hard time making midi work in Logic. The manual could be more detailed in explaining midi communication and how the environment is the heart of all of this
• By what method do you usually learn a new
application? For example: provided manuals,
third-pary tutorials or books, training classes?
Provided manuals and a lot of trial and error. Also forums such as this are a great asset
• Are there any particular examples of manuals or
online help that you consider to be good models for
the Logic Pro manual and onscreen help?
No, logic's manual is as good as most others.
• What do you think is the most difficult
feature/concept to grasp in Logic Pro?
For me it was the transform window, it took me a while to get the hang of it. none of the other programs I worked in had anything quite like it.
• What's the most frustrating experience you've had
with the Logic Pro documentation?
there are a few errors, so it is frustrating when you are following the manual but not achieving your goal. For example, page 112 says:
There are two possible locations for user icons:
The ~/Library/Application Support/Logic/Logic Resources/Icons folder can contain icons which are only valid for the particular user (~ is the user name). If you save your icons in the root directory—/Library/Application Support/Logic/Logic Resources/Icons—the icons are valid for all users. If icons with identical numbers exist in both folders, the icons found in the user folder have priority.
But this is not the case, they actually go in /Library/Application Support/Logic/images/Icons
there was a couple other mistakes like this too, but i can't remember right now
• Are there any other methods of delivery or media
you think we should explore?
If you wanted to get into doing video tutorial, that would be cool. there is a web site called atomic learning http://www.atomiclearning.com/ they have quicktime video tutorials for a ton of different software applications, some apple, and for a flat fee of 79.99 for a year you can spend as much time as you like learning all of the software applications. I may sign up to learn Web design, and maybe final cut pro. Apple could do something like that for all of the apple software and do it much better I would think, and you guys would make a fortune. well I guess not compared to the fortune you are already making
• What size of computer display do you typically use
to view the onscreen help? For example: 12, 15, 17,
20, 23, or 30-inch?
20 in cinema display
• What resolution is the computer display set to when
viewing Onscreen Help? For example: 1024 x 768, 1280
x 854, or 1920 x 1200 pixels?
1344 X 840
• Do you use multiple computer displays?
no, just the one

Tv tuner card for mega 865 pro

I have seen in MSI web page for Czech that there is a new TV tuner for Mega 865 pro. Is this card the one that will fit into the new Mega pc allowing instant on features?
If yes, could some one confirm the features of this card and when will be available in other countries?
thanks

How to contact MSI.
as far as i'm aware, this new card is not yet currently available

GOOD NEWS FOR THE NANO!!!

"They claim current iPods can already play video (but this is disabled) which means an updated firmware might enable movie playback, something not infeasible given the power of the iPod hardware platform."
http://engadget.com/page/3 -- scroll down to "Think Secret thinks we'll see a video iPod Tomorrow" and read the update!!
This is good news for all those who may be regreting buying the nano. (I don't, it's flash-newer technology, hard drive skips)

Yeah,
Even though the screen on the Nano is small, I would still welcome video playback. I don't think copying full DVD's onto the Nano is practical given the storage size unless there is a way to compress video/DVD content to be loaded on to the Nano. You would be able to hold maybe 1 or 2 full DVD movies plus your music library. The new video iPod and regular iPods have much larger storage for things like full quality audio and video.
I welcome the ability to play Quick Time content, though.
Have a lot of video/movies in QT format and the sound would probably be great over headphones.
I do not regret buying a Nano, though. The Nano is an impressive piece of technology and still a good-looking device for playing any audio/video/image content.
I hope apple does release a firmware updater to recent iPods for video playback.
This would just make the Nano even more slicker device.

Is a Pentium(R) Dual-Core processor good enough for Adobe Premiere Pro?

is a Pentium(R) Dual-Core processor good enough for Adobe Premiere Pro? Under system requirements, Adobe listed Intel Core Duo...not sure if this is just as good?

Hi Brian,
Good question. Keep in mind that these are minimum system requirements. I have not had a core 2 duo for some time, but I recall that the performance was not that good at that time, and this was CS5.5, or so. If you are going to use this machine, be sure to work at lower playback resolutions until you can afford a more powerful computer.
Video editors typically have more powerful systems than the minimum system requirements. Check our hardware forum for details: Hardware Forum
Thanks,
Kevin

At last some good news for UK iPhone users

After the UK users seemingly getting a raw deal from from Apple as of late (no Atv price drop or movies etc), a report on Pocket lint informs us that our tariffs will be moving into line with their non iPhone tariffs in Feb. below is a copy but for more info check it out.
The three current tariffs for iPhone will be brought in line with the minute and text bundles offered on the new tariff structure.
iPhone customers on a £35 per month contract will get three times more minutes and more than double the number of texts than before.
The new £45 iPhone tariff gives the same amount of minutes and texts as the former £55 tariff so customers who were on the £55 tariff can either save £10 per month or take the new £75 tariff with 3000 minutes and 500 texts a month.
All iPhone customers will continue to receive "unlimited" data browsing and access to The Cloud's Wi-Fi hotspots.
Roll on Feb
Message was edited by: Grant Davies

This is indeed good news! Well done O2!
This is from the O2 iPhone 'Pay Monthly consumer airtime contract for iPhone (November 2007)'
5.15 You may move to another iPhone tariff at any time, provided that you may only change tariffs a maximum of once per month. Changing tariffs will not affect your Minimum Period. You will not be able to move to a general O2 Pay Monthly tariff. Where you have notified us you wish to move to an alternative iPhone tariff, unless we advise otherwise, your new tariff will commence at the start of your next billing cycle.
I hope to move from the old £45 > new £35 Tariff (£120 a year saving).
Would be good to hear of any experiences from other UK iPhone users attempting to do this or similar.

Are the new displays for MacBooks only - Options for a Mac Pro User?

I am currently running 23 inch displays in our small design studio (4 workstations). I need a new or a second display for my own Mac Pro. I hate the new 24 inch display. I cannot imagine running Final Cut Studio on this glossy screen. So is anyone else out there in this situation? Looking for other choices? I want to stay in the Apple line up if possible but now I am even looking at Dells, as I feel Apple will only continue with the glossy screens.
Are any pro-users in video or photography using the new 24 inch displays? and I mean users who do this for a living. Thanks everyone?

Hello!
Sorry it took a while to notice your post. There are two options for your mac pro to use the new 24 inch cinema display. The ATI Radeon 4870 HD has the mini-display port on it, and the Nvidia GT120 also is an option. Personally, I'd go with the 4870 as its a much better graphics card.
You can find them on the Apple store's site under DISPLAYS/Graphics
Hope this helps.
Now, just to clear something up. If you have a 2008 mac pro, you can run the GT120 if you prefer.

VGA for MEGA 865 Pro

Hi,
I am an owner of a MEGA PC 865 Pro and i would like to install a VGA card. Which one would you propose in order to fit the box and the PSU (220W)?
I need it for gaming such as SimCity4, Civ4, Age of Empires III, etc., not for FPS or driving and flying simulators.

the best suggestions were made here:
https://forum-en.msi.com/index.php?topic=95111.0
i'm pretty sure i saw elsewhere that ATI Radeon cards don't have as high power requirements as Nvidia's, certainly there have been plenty of users using 9800Pros and 6600s with little trouble

Do we have a good new for 4.4.2 update?

Can you post the good thing for the new update of z1?

http://blogs.sonymobile.com/2014/03/19/new-sony-software-upgrade-including-android-4-4-kitkat-rolls-...
We’ve been working to build new Sony experiences on Google’s KitKat release to create some neat / sweet features (if we say so ourselves) – in addition to a few performance tweaks here & there, some of the functionality you can look forward to includes:
Google’s Android 4.4; KitKat as standard – bringing performance & UI optimisation…
We’ve added our tweaked Status Bar and Quick Settings… now more intuitive and customisable (and pretty easy on the eye)… cleaned up to ensure you only get the notifications you really need
If you’ve got a Sony PlayStation 4, you might recognize our new user interface – we’ve added the same sleek launch animation and livewallpaper across the lock and home screens
We’re also uplifting Sony’s entire native app portfolio to the latest versions – bringing tweaked / improved / current experiences for (to name but a few): Messaging, MyXperia, Smart Connect, Small apps, TrackID, TrackID TV, Sony Select, Smart Social Camera and…
Sony’s Media apps: WALKMAN, Album and Movies, with Sony Entertainment Network cloud service integration* – a more converged and full Sony entertainment experience – Sony Entertainment Network & PlayMemories integration with a more intuitive UI, better download speeds, and more!
Our unique custom interface experience: “Xperia Themes”, with downloadable UI packs from Sony Select – skin up to 280 assets across your Xperia smartphone with a variety of styles, and more to follow soon…
Next up, we’ll start rolling Android 4.4 KitKat for Xperia Z, Xperia ZL, Xperia Tablet Z – and Xperia ZR – from mid-Q2.
And… we’re also excited to tell you that we’ll make Android 4.4; KitKat available for Xperia T2 Ultra, Xperia E1 and Xperia M2 – we’ll be back with more details; bespoke feature sets and timings as things progress.
*As usual, timing & availability may vary by market & carrier
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Optimal Scratch Disk Setting for Notebook/Macbook Pro Users

After doing a ton of research, I came across THIS guidline for different scratch disk setups but I am still not sure what would be the best setup for me.
Here is what I am working with for my Current Projects Work Station
2011 i7 Macbook Pro with SSD as my main drive and 750GB 5400rpm HD in the optical bay.
OWC Elite Mini and Dual Mini in Raid0 for Media Storage. Both 7200rpm Drives
Currently I have my scratch disk set to the following:
SSD: Startup drive, OS, Programs, Project Files and Exports
750GB HD: Partitioned - 250GB to Backup SSD and 500GB for Photo storage and PP Scratch Disk Video, Audio and Previews
OWC Minis: Media Storage for Current Projects
My question is, what can I do to optimize my premiere pro settings?
Should I move my scratch disk to my external HD since its a faster drive?

I have a very similar setup but am using a couple pieces of new gear. Wondering if Harm or any of the rest of you have any advice.
2011 i7 Macbook Pro with 500GB SSD as my main drive and 750GB 5400rpm HD in the optical bay. The SSD is a new
Samsung Electronics 840 Pro Series 2.5-Inch 512 SATA_6_0_gb Solid State Drive MZ-7PD512BW
4th-generation 3-Core Samsung MDX Controller ensures sustained performance under the most punishing conditions
Backed by an industry-leading five-year limited warranty
I have various LaCie drives that contain projects, media, exports connected via LaCie Tbolt esata adapter. So these are drives I've had for years that are now running at 3G esata speeds.
I'm not using the 2nd internal drive for anything since it is 5400rpm. I just use it for backups, photo, music storage.
So I ususally work small projects with the projects, media, exports, renders all pointing back to the esata connected external LaCies.
Should I point media cache to the 500GB SSD my internal c drive? The answer to this is still confusing since I've read many conflicting posts in various places.
Any other suggestions for now with this setup? (External Tbolt connected raid not yet in my budget.)

Some possible good news for MacBook Pro Core Duo owners....

All,
I believe I am now running 2.4GHz 802.11N on my MacBook Pro Core Duo.
I have a Belkin F5D8071 ExpressCard installed.
I also have the new Airport Extreme.
Before I got the AE, I tried to run the 802.11N enabler with the Belkin card installed. No go. The enabler said my hardware didn't meet the minimum requirements.
But, I received my AE yesterday and installed the Airport Utility on the MacBookPro while the Belkin card was plugged into the ExpressCard slot.
As I was watching the installation, I noticed that the enabler installed!!!
So I switched the AE to N only 2.4GHz (Belkin support has no mention of support for 5GHz N for the F5D8071). And my MBP joined the network!
So I investigated some more. I opened Network Utility and it said my link speed was now 144Mbps. And the MAC address began with 00 17 3F. That is registered to Belkin. The Belkin card was active! But I saw no power light on the Belkin card. So I went into IORegistryExplorer and found the entry for the ExpressCard, it said the IOVendor was Apple. So what I THINK is happening is the Apple Driver is now recognizing the Belkin card and the driver just doesn't know how to drive the lights on the card. But it does recognize the chipset on the Belkin card. Which Belkin says the chip is made by Airgo.
I ran a quick speed test by copying a 1GB file from a wired PowerBook to the MBP. It only took 12 minutes to copy!!! Sweet!!! I have "N" speeds on a Core Duo MacBook Pro.
Now one limitation is the Belkin card does not support 5GHz. But there is hope for CD MPB owners. Hope this helps others.

I have a February (very early) MacBook Pro Duo. I bought the Belkin F5D8071 card, plugged it in and installed the Airport Extreme software including the system 802.11N enabler. I set the AE to the 802.11N only mode and it does not work! Any suggestions? I would think that Belkin will eventually come out with their own soft ware patch for OSX. Thanks.
MacBook Pro Intel Core Duo Mac OS X (10.4.8)

Good News for Window User DVD to IPOD

you need to use dvd decrypter then videora ipod converter.
these step will bring down from 4g movie to around 700mb. when you using videora ipod converter make sure the audio check with channel 6.
then if you want to compress more then you need to buy quick time pro. these step will compress the file to around 350mb all these step will take around 10 hrs. good luck.
it took me almost a week to find out so please anyone know another way faster please post it.

PSPware works good and very fast, u just have to uncheck the sync box, then choose the video you want to convert and pspware will do a full dvd in under an hour.

Good news for Winchester users and CPU temp. reading after S3 suspend

Bios 3.95 seems to solve all my previous problem with CPU temperature readings after S3 suspend state.
Now the temperatures are after S3 the same as before (15 degree C lower). So Speedfan's control of fans is more precise now. My CPU fan is stopped all the time, in case of warning temperature 50 deg.C, all fans go on 100% (including CPU). With this BIOS I am for the first time fully satisfied with this board.
Cool'n'Quiet is working and S3 as well. I haven't noticed any problem yet.

Quote from: rocka on 27-December-05, 00:56:39
yo wabrooke, it's amazing u managed to swap out the bios chip from the HP computer set, I got mine same as well. Is that a tedious job? Can give me some guidelines to do it as well? if not, i guess i'm going to change back to dfi soon.
no, very simple. Just turn off your system, unplug the machine, use a paperclip or something similiar, pry the bios chip upwards and pull out (make note of which way the notch is facing), insert the replacement chip, viola! Now you have pretty much the MSI oem board. I think I've heard some boards are red or something (the MSI boxed boards), unless that was an older revision, but other than that, everything else is the same. The only main thing is, if you switch out the bios chips, you can no longer run the disc image to restore the hard drive, which isn't a biggie to me, since I purchased an OEM copy of Windows XP MCE, and I also have and run Windows XP Pro.

A good news for MPC 865 PRO users

Similar Messages

Maybe you are looking for