A l'enregistrement de diaporama , il ya refus avec message d'erreur WMF a rencontré un probleme.
Lors de l 'enregistrement de diporama , renvoi du message d'erreur suivant WMF a rencontré un problème ,et n'enregistre pas le diaporama .
Je suis sous Windows 7 64 bits edition familiale premium
Cette anomalie est apparu aprés un bon fonctionnement normal .
Que faire ?
Bonjour,
Je vous conseille d'effectuer les tests suivants:
* copier le contenu du diagramme du VI dans un VI vide et refaire le test avec le nouveau VI (il se peut que votre diagramme soit corrompu)
* faire le test avec un VI simple pour voir si le problème est lié à votre VI ou au RT Communication Wizard.
Vous utilsez LabVIEW RT 7.0 Anglais. La version de LabVIEW 7.0 est-elle en Français? Avez-vous la possibilité de tester sous RT 7.1? Si non, vous pouvez poster votre VI pour que je fasse le test.
Cordialement.
Matthieu G.
AE, NI France
Similar Messages
-
Bonjour,
Je n'arrive pas à installer la mise à jour 10.7.5 sur mon Mac Book Air.
La mise à jour se télécharge et, aprsè redémarrage, s'arrête en plein milieu de la mise à jour en affichant ce message d'erreur :
"La mise à jour « Mise à jour Mac OS X » n'a pu être enregistrée
La mise à jour n'a pas pu être vérifiée et peut avoir été endommagée au cours de son téléchargement. Elle sera téléchargée mais à nouveau recherchée au prochain lancement de Mise à jour de logiciels."
Sauf qu'au prochain lancement de Mise à jour Logiciels évidemment, elle ne se retélécharge pas.
Quelqu'un pourrait m'aider ?
Merci beaucoup !
Hello,
I do not succeed to install the update 10.7.5 on my Mac Book Air.
Download happens but after restaring the update is underbroken with the following error message :
The update 'Update Mac OS X could not be saved.
The update could not be checked and could have been damaged during the download. It will be downloaded again at the next launch of Software Update.
But obviously it does not happen.
Could someone help me?
Thanks a lot.Read this whole message before doing anything.
Back up all data. Quit the App Store application if it’s running. Take the following steps until the problem is resolved.
Step 1
Triple-click the line below to select it:
/Library/Preferences/com.apple.SoftwareUpdate.plist
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with a file selected. Move the selected file to the Trash, leaving the window open. Relaunch the application and test. If there's no change, quit again and restore the file you moved from your backup, overwriting the one that may have been created in its place. Otherwise, recreate your settings in theSoftware Update preference pane.
Step 2
Hold down the option key and select
Go ▹ Library
from the Finder menu bar. Move the following items from the Library folder to the Trash (some may not exist):
Caches/com.apple.SoftwareUpdate
Preferences/com.apple.SoftwareUpdate.plist
Preferences/ByHost/com.apple.SoftwareUpdate.*.plist
Saved Application State/com.apple.SoftwareUpdate.savedState
Here, "*" stand for a long string of letters, numbers, and dashes. Leave the Library folder open. Try Software Update again. If it works now, stop here. Close the Library folder.
Step 3
If you still have problems, quit the App Store again.
Triple-click anywhere in the line below to select it:
rm -fr $TMPDIR../C/com.apple.SoftwareUpdate
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal. Test. -
Je ne peux pas valider ma commande de Photoshop Elements
Lorsque j'arrive à la page règlement, il m'affiche le message suivant :
Erreur dans votre commande
Ce compte a été enregistré pour un pays différent. Veuillez vous déconnecter puis vous reconnecter à un compte existant pour ce pays.Je ne peux pas valider ma commande de Photoshop Elements
Lorsque j'arrive à la page règlement, il m'affiche le message suivant :
Erreur dans votre commande
Ce compte a été enregistré pour un pays différent. Veuillez vous déconnecter puis vous reconnecter à un compte existant pour ce pays. -
Bonjour,
J'ai un message d'erreur: Impossible d'enregistrer "Sans titre-2 sous un nouveau nom. Le fichier "DBTmp9264992478591057" est endommagé (code erreur 3)Bonjour.
De quel logiciel parlez-vous ?
Sur quel support essayez-vous d'enregistrer (réseau ? clé USB ? …) -
Enregistrer sous une version antérieure avec PS cc
Bonjour. Comment enregistrer sous une version antérieure avec PS cc?
Merci.Assurez-vous cependant de Maximiser la compatibilité lors de l'enregistrement.
Oui, c'est une condition indispensable pour la rétro-compatibilité des PSD. -
Hi, My english its not perfect but i'll try to explain my situation. I bought an iPad air with a problem in the monitor, yellow stains in the border with black screen and i went to an official apple repair in Portugal and they sent me for the third time an iPad with the same problem and with more problems like white graphics lines in the animation horizontal/vertical switch sides of the iPad view. At the fourth iPad that was sent with the same problem, Apple refused to replace for another iPad and said to me that was not their problem anymore and now I'm going to sue the company because nobody in Portugal can solve this situation in the costumer line. Im very sad with that, but i'm going till the end. I BOUGHT an iPad with FABRICATION PROBLEM and you guys don't care about to fix it. Thanks.
What should i do more??crusherPT wrote:
Ok, but i can't find the email of apple ireland. Someone have it?? i can't make a phone call to their line because it's not free from Portugal.
Apple doesn't do support by email. All the contact information that is available can be found by using the Contact Us link at the bottom right of every page.
If the call is not free, you may need to pay to call them. -
HT201068 My Remote Desktop 3.8 is refusing to update. Is anyone else having this problem?
My Remote Desktop 3.8 is refusing to update.
Welcome,
I've upgraded 3 systems (MBP 2012, MBP 2013 Retina & late 2009 iMac) and haven't had this issue.
What's your box?
Regards,
Shawn -
Getting "refused connection" message; can't video or audio chat
I have searched and read posts on this forum but I am somewhat at a loss, perhaps due to my lack of sophistication on these issues. Here are the facts:
My son is living in Belgium this summer, and we had hoped to iChat with him using audio and video. He has a 15" PowerBook G4 running 10.4.6 and iChat 3.14, and an external iSight.
This computer, behind an AirPort Express Base Station, worked well all year for video iChatting at college (USA).
He now has the same computer (firewall off), the same AirPort Express Base Station in his Belgian apartment. The apartment is connected via a Prestige 841 DSL modem (I believe this is a Zyxel unit).
We get the "the user refused the connection" message when audio or video chat is attempted. We are able to chat text-only. Also, Skype works (wasn't installed until after these problems were noted).
At my end I have a MacBook Pro running 10.4.6, built-in iSight camera, iChat 3.1.4, behind an AirPort Extreme. I am able to video and audio chat with other people behind this configuration.
Also my son can't audio or video chat with iChat with other users, so clearly the problem is at his end.
I had him change the port that iChat works on from 5190 to 443 but that didn't help. QuickTime streaming speed has been adjusted on both his computer and mine.
It appears that the prestige 841 is not actually a router but just a dsl modem, so I don't think there is any port issue with that unit. The airport express isn't doing any port forwarding, to my knowledge, at his end, but I admit to being a bit confused.
I tried looking at the Ralph Johns' ichat pages but I couldn't figure much out from them, especially since I in am the USA and my son's machines are in Belgium. Hopefully I have provided enough information to get a step-by-step solution from the local genuises here - please?
Thanks for any help.Hi Andrew,
I can not see the 841 listed on this site.
http://portforward.com/routers.htm
This may be that it does not Route or it could mean it is recently new and not on the list yet.
However we can find out by doing a few things.
If you go to System Preference > Network.
There are two drop downs near the top.
Choose the Airport option in the second drop down.
Now click the TCP/IP tab
It should then look like the Pic Molly and I have been swopping in this thread http://discussions.apple.com/thread.jspa?messageID=2531947#2531947
(your IP as 10.0.1.xxx and the "router" being 10.0.1.1 fro the Airport)
An Airport device does not do Port Forwarding as such.
in it's default mode is does NAT everything. This means it does point all data to a specific IP from one side (modem or ISP if modem is in Bridge) to the other (LAN = Computers).
This can mean problems if the modem does route and is DOING DHCP.
IF he takes the Airport out of the connection set up and connects direct to the modem does it work ?
Get him to repeat the above in System Preferences > Network.
This time he will have to select Built-in Ethernet from the drop down.
We will need to know the IP that now shows up. Refere to the thread I linked you to and the posts to Molly about how to tel if the modem is in Bridge from the IP numbers he gets.
There are test accounts and real live testers listed in the 3 tables on this page
http://www.ralphjohnsuk.dsl.pipex.com/ContactTesters.html
Which ones can you get to and can your son when connected direct to the modem ?
IF the Modem is routing then it will be simply a question of turning DHCP Off in the Airport and making it a Wireless Access point.
Go to Applications/Utilities
Open Airport Admin Utility.
Log on to the Airport in the first window.
Then go to the Network tab in the main window.
Deselect Distributing Addresses (This is the Airport's DHCP)
If you repeat the System Preferences > Network > > TCP/IP tab thing you should now see the same or at least similar IPs as when connected directly to the modem
Keep the Quicktime setting to match the download speed.
As it is a Zyxel keep the port at 443.
Also get him to Check if his MAc Firewall is On
( System Prefereces > Sharing > Firewall tab)
Also check the Advanced Button here and theat it is Not set set to "BLock ALl UDP Traffic"
1:47 PM Wednesday; June 14, 2006 -
I am not finding a solution online that I can understand. Please tell me how what the proxy settings are for Mozilla Firefox's server connection? Firefox is my default web browser and I keep getting messages that say, "Proxy server refusing connection to the internet. Check proxy settings or contact server administrator." I go to the Advanced tab, click on change connection to internet settings, and delete manual proxy information and click on "no proxy." When the window closes and I log back onto the laptop, Mozilla Firefox loads up and I get the same error message again. I don't know how to change the proxy server to no proxy so that it will stay that way and not reset itself to the manual proxy information every time the Mozilla Firefox window reopens. Help!
*http://kb.mozillazine.org/Preferences_not_saved
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
Winamax acces refuse avec version 8.0.2
bonjour
depuis la mise à jour de mon IPAD en 8.0.2 je n'arrive plus à me connecter à winamax
il mentionne "accès refusé"
comment faire pour revenir à la version antérieure ?
merci de votre aideBonjour,
Nous avons apporté les correctifs à notre application pour qu'elle fonctionne avec la version 8 d'iOS.
Nous sommes depuis 10 jours en attente de la validation d'Apple pour que notre mise à jour soit publiée.
Nous vous remercions pour votre patience et soyez assuré que nous vous préviendrons lorsque cette mise à jour sera disponible. -
Le diaporama avec les albums reste bloqué sur la 1ère photo
Mac OS X: Gray screen appears during startup - Apple Support
-
Bonjour, j'ai enregfistré un fichier sous photoshop CS5 extended . impossible de l'ouvrir ensuite. j'ai un message d'erreur : on m'indique que la version n'est pas la bonne pour lire le fichier. Je n'ai fait aucune MAJ sur photoshop pourtant . je suis sur Pc et je m'arrache les cheveux. Merci de m'aider
Avez-vous la possibilité de partager ce fichier (s'il est lourd, via wetransfer / Dropbox, Adobe Send now…) ?
-
my i pad is not charging ,however it shows the green light and charging signs
.before i had this problem, then it started charging on its own . now i was abroad it was 37% charged .was going to charge it for the journey and it stopped charging again .but it works excellent except for the charging .it still works but i am not using it now .just left it on the charger .the green light and the battery sign shows its charging ,but the i pad now is 35% the battery power .pls help .i cant aford another pad .i am broke and i am so much used to itIt may just be giving you false battery info. Unless it actually dies prematurely, Its just a software error. I would recommend restoring. http://support.apple.com/kb/ht1414
-
L'ordinateur refuse de graver code erreur 0x80020000
J'ai créé un deuxième dossier à graver. J'y ai importé des photos mais lorsque j'introduit un CD et lance la commande «graver» l'ordinateur m'indique le code erreur 0x80020000.
Il y a deux semaines j'ai gravé un CD photos sans aucun problème.
Est-ce que quelqu'un peut m'expliquer le code erreur?This forum is in English only. I suggest downloading a translation app like Wapps, and post a new question in the forum.
-
title says it all. I have two mac laptops and iphone and ipad. everyhting syncs perfectly expect my new macbook air. about 30% of songs fail to download due to network failure. But if my other devices works fine...then why not this one.
second, when I try to download from cloud, I have same problem and same can't wont download at all.title says it all. I have two mac laptops and iphone and ipad. everyhting syncs perfectly expect my new macbook air. about 30% of songs fail to download due to network failure. But if my other devices works fine...then why not this one.
second, when I try to download from cloud, I have same problem and same can't wont download at all.
Maybe you are looking for
-
Dear SAP Gurus, i have problem to cancel DP Request. I made DP Request from SD(VF01). And i want to cancel that DP Request because of any reason. so i cancel it through VF11 and its going smoothly. When i see the doc. flow, the status of that DP Requ
-
How can i get apps from my itunes to my iphone?
okayy so i want to get the facebook application on my iphone and i dont have the app store on my ipone.. soo how can i get the app from itunes to my phone for ffree? i have a windows computer and i have restrictions on my phone because i use it too m
-
Mavericks was fine for a while but now it will not start up, any ideas please?
I get a white screen with apple logo, revolving disc and bar. once the bar reaches the end the MacPro switches off. ican do a safe start, the HD appears to be OK so I have tried to re install Mavericks but I get as far as selecting disk , the alterna
-
Hello everybody! I have a big doubt and so does my CIO. I'd like to develop Web Services using the facade pattern (Entity + Session). I prefer to put the business logic into the stateless EJB and just go to the database to insert, update or delete re
-
Purchased lightroom 5 (box with disc), laptop doesnt have cd/dvd drive, can i download software?
i did not realize that this laptop dodnt have a cd drive and i dont want to purchase the download since i purchased the cd. is there a way to download from adobe using the serial number?