A licensing error has ocuured when using the Microsoft Expression Ultimate 4

yesterday I install Microsoft Expression Ultimate 4,then I install it .today I installed Microsoft Expression Ultimate 4,open it , it tells me "a licensing error has ocuured",then close ,why???

Honestly, I believe that this is an example of Trustworthy Computing where Microsoft has remove support for this application which may also include the licensing server which I am sure is or it has at one point been in use. Hence, anyone using that
program automatically shuts down the application.
I believe without Trustworthy Computing, we would be able to run the application in any case without closing upon downloading the validation code for your computer.
I think that Microsoft should repair the unsupported application at least to close in an open file state so that users who like to use expression studio can.
Deborah Willis-PhD

Similar Messages

HT202159 Error message while downloading. :Compressor Failed to Download. An Error has occurred. Use the Purchases page to try again." After retrying, I receive same message.

Error message while downloading. :Compressor Failed to Download. An Error has occurred. Use the Purchases page to try again." After retrying, I receive the same message. I have uninstalled compressor and tried again. I get same results.

Anti-viral siftware and firewalls can interfer with the MAS.

Why are there CORBA error messages -- COMM_FAILURE when using the orb obj?

Hi Guys,
I followed the tutorial http://download.oracle.com/javase/6/docs/technotes/guides/idl/GShome.html
compiled and run the code. Everything works fine however whenever I use the ORB orb object I get the following message
both in my Naming Service and the HelloServer output:
2010-12-10 12:35:46.505 FINE Transport to 127.0.1.1:44100: stream closed on read < 0
2010-12-10 12:35:46.506 FINE ServerGIOPConnection to 127.0.1.1:44100 (ec4a87): getMessage() -- COMM_FAILURE
2010-12-10 12:35:46.507 FINE ServerGIOPConnection to 127.0.1.1:44100 (ec4a87): streamClosed()
2010-12-10 12:35:46.508 FINE ServerGIOPConnection to 127.0.1.1:44100 (ec4a87): close()
Why is this happening?
I have also installed jacorb and added it to my class path and run the examples with:
jaco -Djacorb.config.dir=. -DORBid=HelloClient HelloServer
ns -Djacorb.naming.ior_filename=/home/zorg/Project/Java/CORBA/NameService/NS_Ref
jaco -Djacorb.config.dir=. -DORBid=HelloClient HelloClient
I have included the code from the tutorial for convinience:
// HelloServer.java
// Copyright and License
import HelloApp.*;
import org.omg.CosNaming.*;
import org.omg.CosNaming.NamingContextPackage.*;
import org.omg.CORBA.*;
import org.omg.PortableServer.*;
import org.omg.PortableServer.POA;
import java.util.Properties;
class HelloImpl extends HelloPOA {
private ORB orb;
public void setORB(ORB orb_val) {
    orb = orb_val;
// implement sayHello() method
public String sayHello() {
    return "\nHello world !!\n";
// implement shutdown() method
public void shutdown() {
    orb.shutdown(false);
public class HelloServer {
public static void main(String args[]) {
    try{
      // create and initialize the ORB
      ORB orb = ORB.init(args, null);
      // get reference to rootpoa & activate the POAManager
      POA rootpoa = POAHelper.narrow(orb.resolve_initial_references("RootPOA"));
      rootpoa.the_POAManager().activate();
      // create servant and register it with the ORB
      HelloImpl helloImpl = new HelloImpl();
      helloImpl.setORB(orb);
      // get object reference from the servant
      org.omg.CORBA.Object ref = rootpoa.servant_to_reference(helloImpl);
      Hello href = HelloHelper.narrow(ref);
      // get the root naming context
      org.omg.CORBA.Object objRef =
          orb.resolve_initial_references("NameService");
      // Use NamingContextExt which is part of the Interoperable
      // Naming Service (INS) specification.
      NamingContextExt ncRef = NamingContextExtHelper.narrow(objRef);
      // bind the Object Reference in Naming
      String name = "Hello";
      NameComponent path[] = ncRef.to_name( name );
      ncRef.rebind(path, href);
      System.out.println("HelloServer ready and waiting ...");
      // wait for invocations from clients
      orb.run();
      catch (Exception e) {
        System.err.println("ERROR: " + e);
        e.printStackTrace(System.out);
      System.out.println("HelloServer Exiting ...");
// Copyright and License
import HelloApp.*;
import org.omg.CosNaming.*;
import org.omg.CosNaming.NamingContextPackage.*;
import org.omg.CORBA.*;
public class HelloClient
static Hello helloImpl;
public static void main(String args[])
      try{
        // create and initialize the ORB
        ORB orb = ORB.init(args, null);
        // get the root naming context
        org.omg.CORBA.Object objRef =
            orb.resolve_initial_references("NameService");
        // Use NamingContextExt instead of NamingContext. This is
        // part of the Interoperable naming Service.
        NamingContextExt ncRef = NamingContextExtHelper.narrow(objRef);
        // resolve the Object Reference in Naming
        String name = "Hello";
        helloImpl = HelloHelper.narrow(ncRef.resolve_str(name));
        System.out.println("Obtained a handle on server object: " + helloImpl);
        System.out.println(helloImpl.sayHello());
        helloImpl.shutdown();
        } catch (Exception e) {
          System.out.println("ERROR : " + e) ;
          e.printStackTrace(System.out);
}Edited by: 819887 on 10-Dec-2010 04:51
Edited by: 819887 on 10-Dec-2010 04:58

Figure out the actual problem is when the naming service is resolving the name on line:
helloImpl = HelloHelper.narrow(ncRef.resolve_str(name));

I get Error Code 1 when using the installer. Please advise.

When running the installer, it quits with the message: Error Code 1. Please advise how to resolve @this error.

Gener7: Good morning. Thanks for speedy reply. I’m running Windows 7 on a Dell Studio laptop computer. I have CS6 installed, and it runs okay.
I ran the CC Cleaner tool to uninstall Photoshop CC. PCC kept crashing every time soon after I tried editing an image. I gave up. After the cleaning, I tried to re-install PCC. The error code 1 showed each time I ran the installer.
Please advise.
Thanks.
==============

Error -1950679035 When Using the LabVIEW Shared Variable

While communication of PLC & labview 2014 SP1 via modbus ethernet I am getting continuously Error -1950679035 as per attachment.
Also distribution manager system is not responding while expanding of shared variable library. And it is not showing list of variable.
Please share some solution.
Attachments:
error.png ‏263 KB

If the Distributed System Manager isn't running, then something is seriously wrong! Has it ever worked? Have you ever had a successful deployment of Shared Variables? Have you recently installed a new version or updated LabVIEW? These questions are designed to see if something "broke", or possibly never worked in the first place ...
Bob Schor

A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)

Hi guys
i have problem when i run my windows application exe in windows server 2003
it give me this exception error :
I using sql server 2005
visual studio 2008
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.Data.SqlClient.SqlException: A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error)
at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParserStateObject.ReadNetworkPacket()
at System.Data.SqlClient.TdsParserStateObject.ReadBuffer()
at System.Data.SqlClient.TdsParserStateObject.ReadByte()
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlDataReader.ConsumeMetaData()
at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
at System.Data.SqlClient.SqlCommand.ExecuteDbDataReader(CommandBehavior behavior)
at System.Data.Common.DbCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet)
at Sales.SalesClass.ShowSalesData(String ConnectionString)
at Sales.Form1.timer1_Tick(Object sender, EventArgs e)
at System.Windows.Forms.Timer.OnTick(EventArgs e)
at System.Windows.Forms.Timer.TimerNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
Sales
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Documents%20and%20Settings/administrator.ALTAWIREADYMIX.000/Desktop/Sales.exe
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
System.Data
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
System.Transactions
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Transactions/2.0.0.0__b77a5c561934e089/System.Transactions.dll
System.EnterpriseServices
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.EnterpriseServices/2.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dll
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
Why this error show and how to solve it
if possible help me
Why this exception show and how to solve it.
Notes this exception not close my application and not affect in result show but i don't know why it show

The problem can be caused by certain issues of long-running queries, which are reported improperly. Try increasing the timeout:
http://support.microsoft.com/en-us/kb/555938

I keep getting the message "An unknown error has occurred" when trying to sign in to the App Store. Why?

I keep getting the message "An unknown error has occurred" when trying to sign in to the App Store. How do I solve this problem?

Make sure you have the correct country selected. Click the round flag icon bottom right side of the App Store window.

HT201303 An unknown error has occurred when trying to sign in , and I know I putting in the correct info, this stinks can anyone help? Because apple isn't...

An unknown error has occurred when trying to sign in , and I know I putting in the correct info, this stinks can anyone help? Because apple isn't...

urgh... just noticed my previous post said i have mountain lion... i meant that i have snow leopard. no idea why i messed that up!
anyway, i just tried reinstalling snow leopard from the usb key that came with the computer. Then, I installed software updates until it told me there were no more updates. After that, I tried the app store again, and it still is giving me the unknown error. really irked by that. may have to take it back to the apple store yet again, to see if i can figure out why the app store won't work.

Error Connecting to database URL jdbc:oracle:oci:@rmsdbtst as user rms13 java.lang.Exception:UnsatisfiedLinkError encountered when using the Oracle driver

Trying to Install RMS application 13.2.2 and I get past the pre-installation checks and when I get to the Data Source details and enter the data source details with the check box checked to validate the schema/Test Data Source I get the following error:
Error Connecting to database URL jdbc:oracle:oci:@rmsdbtst as user rms13 java.lang.Exception:UnsatisfiedLinkError encountered when using the Oracle driver. Please check that the library path is set up properly or switch to the JDBC thin client oracle/jdbc/driver/T2CConnection.getLibraryVersioNumber()
Checks performed:
RMS Application code location and directory contents:
[oracle@test-rms-app application]$ pwd
/binary_files/STAGING_DIR/rms/application
[oracle@test-rms-app application]$ ls -ltr
total 144
-rw-r--r-- 1 oracle oinstall   272 Dec 7 2010 version.properties
-rw-r--r-- 1 oracle oinstall   405 Jan 16 2011 expected-object-counts.properties
-rw-r--r-- 1 oracle oinstall   892 May 13 2011 ant.install.properties.sample
-rw-r--r-- 1 oracle oinstall 64004 Jun 6 2011 build.xml
drwxr-xr-x 9 oracle oinstall 4096 Jun 16 2011 rms13
drwxr-xr-x 3 oracle oinstall 4096 Jun 16 2011 installer-resources
drwxr-xr-x 3 oracle oinstall 4096 Jun 16 2011 antinstall
drwxr-xr-x 2 oracle oinstall 4096 Jun 16 2011 ant-ext
drwxr-xr-x 5 oracle oinstall 4096 Jun 16 2011 ant
-rw-r--r-- 1 oracle oinstall 11324 Dec 18 09:18 antinstall-config.xml.ORIG
-rwxr-xr-x 1 oracle oinstall 4249 Dec 18 10:01 install.sh
drwxr-xr-x 4 oracle oinstall 4096 Dec 18 10:06 common
-rw-r--r-- 1 oracle oinstall 16244 Dec 19 10:37 antinstall-config.xml
-rw-r--r-- 1 oracle oinstall   689 Dec 19 10:37 ant.install.log
[oracle@test-rms-app application]$
Application installation:
[oracle@test-rms-app application]$ ./install.sh
THIS IS the driver directory
Verified $ORACLE_SID.
Verified SQL*Plus exists.
Verified write permissions.
Verified formsweb.cfg read permissions.
Verified Registry.dat read permissions.
Verified Java version 1.4.2.x or greater. Java version - 1.6.0
Verified Tk2Motif.rgb settings.
Verified frmcmp_batch.sh status.
WARNING: Oracle Enterprise Linux not detected. Some components may not install properly.
Verified $DISPLAY - 172.16.129.82:0.0.
This installer will ask for your "My Oracle Support" credentials.
Preparing installer. This may take a few moments.
Your internet connection type is: NONE
Integrating My Oracle Support into the product installer workflow...
     [move] Moving 1 file to /binary_files/STAGING_DIR/rms/application
Installer preparation complete.
MW_HOME=/u01/app/oracle/Middleware/NewMiddleware1034
ORACLE_HOME=/u01/app/oracle/Middleware/NewMiddleware1034/as_1
ORACLE_INSTANCE=/u01/app/oracle/Middleware/NewMiddleware1034/asinst_1
DOMAIN_HOME=/u01/app/oracle/Middleware/NewMiddleware1034/user_projects/domains/rmsClassDomain
WLS_INSTANCE=WLS_FORMS
ORACLE_SID=rmsdbtst
JAVA_HOME=/u01/app/oracle/jrockit-jdk1.6.0_45-R28.2.7-4.1.0
Launching installer...
To make sure I have connectivity from the app server to the database (on a database server) here are the steps followed:
[oracle@test-rms-app application]$ tnsping rmsdbtst
TNS Ping Utility for Linux: Version 11.1.0.7.0 - Production on 19-DEC-2013 10:41:40
Copyright (c) 1997, 2008, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = test-rms-db.vonmaur.vmc)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SID = rmsdbtst)))
OK (0 msec)
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ sqlplus rms13@rmsdbtst
SQL*Plus: Release 11.1.0.7.0 - Production on Thu Dec 19 10:46:18 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ ping test-rms-db
PING test-rms-db.vonmaur.vmc (192.168.1.140) 56(84) bytes of data.
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=1 ttl=64 time=0.599 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=2 ttl=64 time=0.168 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=3 ttl=64 time=0.132 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=4 ttl=64 time=0.158 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=5 ttl=64 time=0.135 ms
--- test-rms-db.vonmaur.vmc ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4001ms
rtt min/avg/max/mdev = 0.132/0.238/0.599/0.181 ms
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ uname -a
Linux test-rms-app.vonmaur.vmc 2.6.18-128.el5 #1 SMP Wed Jan 21 08:45:05 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ cat /etc/*-release
Enterprise Linux Enterprise Linux Server release 5.3 (Carthage)
Red Hat Enterprise Linux Server release 5.3 (Tikanga)
[oracle@test-rms-app application]$
The database is created and all the batch file scripts have been successfully deployed. Now working on the application server. The Weblogic server is installed and 11g forms and reports are installed successfully.
Any help would be helpful.
Thanks,
Ram.

Please check MOS Notes:
FAQ: RWMS 13.2 Installation and Configuration (Doc ID 1307639.1)

Can you merge two user accounts on macbook? my wife has created a user on her new macbook , then inadvertently created a second one when using the migration tool. 1st ac has her office 365 install, yet 2nd has her itunes database, docs and contacts.

Can you merge two user accounts on a macbook? my wife has created a new user on her new macbook air then, inadvertently, created a second one when using the migration tool. 1st a/c has her office 365 install, while 2nd has her itunes database, docs and contacts. What is the best way forward to get everything into the one account? Not sure if the office 365 will allow another installation into the second account, otherwise would just do that and delete the first, if that is possible?

There is no merge but you can move data from one account to another via the Shared folder. Data is copied from Shared. Watch your free space when copying. These are large files. Do one at a time if you are on a small drive. After making copy, delete from other users before you start next copy.
Office365 installs in the main Applications folder and is available for all users on the computer. Activation is tied to the drive not the User.

Why am i getting an error message that says "an unknown error has occured" when i try to update my apps in the app store

Can someone please offer some suggestions why I am getting an error message that says "an unknown error has occured" when I try to download or update my apps in the app store?
Thanks!
disregard! i noticed someone else's post about signing out of the app store and signing in again and it worked.....

Hi ...
Try here > Mac App Store: "An unknown error occurred (100)" when purchasing
If that doesn't help, drag the App Store icon straight up off your Dock so it goes, "poof".
Now drag the App Store icon from your Applications folder to the Dock. Try updating your apps.

I get "an error has occured" when trying to download from the AppStore. I can not re-download as the button is not active.

I encountered the response "an error has occured" when I downloaded Maverick X from the App Store. I can not try to re-download as the download button is not active. I have tried rebooting and to get the download from apple.com but it keeps redirecting to the App Store.
Suggestions?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

I have installed the new up to date itunes which i can open on my PC, however when i connect my ipad or iphone i get an error saying i cannot use the device as the require software isn't installed?? I'm very confused please help......

I have installed the new up to date itunes which i can open on my PC, however when i connect my ipad or iphone i get an error saying i cannot use the device as the require software isn't installed?? I'm very confused please help......

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

Multivalue error when using the previous() function

I am getting a multivalue error when using the previous() function on a dimension object in the report. I thought that the previous function was supposed to look at the current report and then look at the previous record's contents. How could this possibly give me a multivalue error when the value is clearly output in the previous row? Anyone have any ideas?
By the way, this is a valuable function for the types of reports that I design. The next() function would be even more valuable.
Thanks for your help.

Hi Michael,
Could you please test the following solutions it might help you to resolve the issue.
Solution1:
Use slice and dice to reset all the tables that have #multivalue in it. The only problem with this workaround is they have to do the formatting manually.
Solution2:
Also, test the issue by changing the object to dimension if it is a measure or to measure if it is a dimension.
Regards,
Sarbhjeet Kaur

UDESEncrypt Errors when using the JAVA engine (NW IDM 7.0)

Folks,
I'm seeing an error when I use the uDESEncrypt function with the Java Engine in NW IDM SP2 Patch 3.
The error I am getting is:
runFunctionsInString($FUNCTION.encrPWD()$$) got exception
org.mozilla.javascript.EvaluatorException: uDESEncrypt: Key should be exactly 24 bytes long.
The code calling it is:
// Main function: encrPWD
function encrPWD(Par){
     //Example calling DSE internal function
     //UserFunc.uStop("Terminated by user");
     key = "C:\Program Files\SAP\IdM\Workflow\configs\KEY\keys.ini";
     OutString = UserFunc.uDESEncrypt(key, Par);
     return OutString;
I have also seen this error when using Patch 4.
Interestingly enough, the error does not occur when using the Windows Engine. Anyone else seeing this?
Thanks,
Matt

Hi Matthew,
Try to replace the '\' with '
key = "C:
Program Files
SAP
IdM
Workflow
configs
KEY
keys.ini";
Alternative approaches,
1) setting key empty and it will look into %DSE_HOME%\KEY\key.ini
which should be C:\Program Files\SAP\IdM\Identity Center\Key\key.ini on default installation path.
2) or setting the key to something like = 6D5A2AF59B1CDD7F9592484F178331C891537A3F9B91D362
   a 24 byte key...
Also when using DES you should ensure that in Identity Center underneath Options/General
you have encryption algorithm set to 3DES.
Normally if you intend to use this for password provisioning in IC you would also
on the identity store (for instance 'Enterprise people') underneath 'password policy' check
of for 'enable password provisioning.'
By doing so the MX_ENCRYPTED_PASSWORD with be set when operating through
workflow (3DES encryption version of the MX_PASSWORD) which allows you to obtain password
when provisioning to other target systems...

A licensing error has ocuured when using the Microsoft Expression Ultimate 4

Similar Messages

Maybe you are looking for