Error -1950679035 When Using the LabVIEW Shared Variable
While communication of PLC & labview 2014 SP1 via modbus ethernet I am getting continuously Error -1950679035 as per attachment.
Also distribution manager system is not responding while expanding of shared variable library. And it is not showing list of variable.
Please share some solution.
Attachments:
error.png 263 KB
If the Distributed System Manager isn't running, then something is seriously wrong! Has it ever worked? Have you ever had a successful deployment of Shared Variables? Have you recently installed a new version or updated LabVIEW? These questions are designed to see if something "broke", or possibly never worked in the first place ...
Bob Schor
Similar Messages
-
why cant i download all of the itunes songs off my wifes purchased itunes account when using the family sharing? some songs i can and some it wont let me
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
How to use the "Get Shared Variable List" VI on an RT target?
Hello,
I'd like to programatically iterate through all the shared variables in a library hosted on my CompactRIO. I dropped the "Get Shared Variable List" VI into my Real-Time VI, but when I tried deploying it, LabVIEW said
Deploying PRC_GetVarList.viPRC_GetVarList.vi loaded with errors on the target and was closed.
LabVIEW: Failed to load shared library dscProc.dll:ni_lvdsc_process_GetTagListEnd:C. Ensure that the library is present on the RT target. Use MAX to install NI software or FTP to transfer custom libraries to the RT target.
LabVIEW: Failed to load shared library dscProc.dll:ni_lvdsc_process_GetTagListBegin:C. Ensure that the library is present on the RT target. Use MAX to install NI software or FTP to transfer custom libraries to the RT target.
I looked at the MAX Software Wizard, but couldn't find any DSC-related modules. Where should I be looking?
Thanks!
Solved!
Go to Solution.Hello,
The DSC palette is not supported on Real-Time VIs and will lead to errors when deployed. Unfortunately, to have a successful build you will need to modify your application and remove any of the VIs from the DSC palette on your RT Target.
Regards,
M. Whitaker
ni.com/support -
I can query the device through the measurement and automation tool. I can also Identify the instrument by issuing a *IDN? with VISA write and read. Why do I get this error while using the drivers supplied by NI for this equipment? Any Ideas?
Hi, Brooks.
Attached please find the files containing all the information concerning my attempt to control the Agilent E4438C. Hope you can make sense of it and help me.
Regards
isaac
Attachments:
nireport.txt 2 KB
Capture.spy 5 KB
CaptureSpy.doc 117 KB -
I'm using the Simulation Loop on LV RT when interacting with some hardware (i.e. all I/O is happening in the Sim loop). I'm going to conduct a frequency sweep test on the hardware and want to use the Simulation Chirp function. However, there is no way (that I can see) to trigger the Chirp to start at some event (i.e. I click a boolean on the front panel and enter a case statement). The Chirp is tied to the global time of the Simulation loop and so are it's input parameters. Is there a way to make it relative to some time at which an event happens?
Craig,
Your solution will 'cut' the beginning of the signal and only show the signal afterwards.
To control when the chirp should start, the best option is to use the Chirp Pattern.vi ( in the Signal Generation palette) and use a Lookup table to control when to feed the time. The shipping example (in LabVIEW 2013) shows how to code using a lookup table.
C:\Program Files (x86)\National Instruments\LabVIEW 2013\examples\Control and Simulation\Simulation\Signal Generation\SimEx Chirp.vi
Then, to start from a toggled boolean, look at the example:
C:\Program Files (x86)\National Instruments\LabVIEW 2013\examples\Control and Simulation\Simulation\Signal Generation\SimEx Step.vi
and Here is the example in 2013 (in attachment):
Barp - Control and Simulation Group - LabVIEW R&D - National Instruments
Attachments:
SimEx Chirp with Delay.vi 241 KB -
Why are there CORBA error messages -- COMM_FAILURE when using the orb obj?
Hi Guys,
I followed the tutorial http://download.oracle.com/javase/6/docs/technotes/guides/idl/GShome.html
compiled and run the code. Everything works fine however whenever I use the ORB orb object I get the following message
both in my Naming Service and the HelloServer output:
2010-12-10 12:35:46.505 FINE Transport to 127.0.1.1:44100: stream closed on read < 0
2010-12-10 12:35:46.506 FINE ServerGIOPConnection to 127.0.1.1:44100 (ec4a87): getMessage() -- COMM_FAILURE
2010-12-10 12:35:46.507 FINE ServerGIOPConnection to 127.0.1.1:44100 (ec4a87): streamClosed()
2010-12-10 12:35:46.508 FINE ServerGIOPConnection to 127.0.1.1:44100 (ec4a87): close()
Why is this happening?
I have also installed jacorb and added it to my class path and run the examples with:
jaco -Djacorb.config.dir=. -DORBid=HelloClient HelloServer
ns -Djacorb.naming.ior_filename=/home/zorg/Project/Java/CORBA/NameService/NS_Ref
jaco -Djacorb.config.dir=. -DORBid=HelloClient HelloClient
I have included the code from the tutorial for convinience:
// HelloServer.java
// Copyright and License
import HelloApp.*;
import org.omg.CosNaming.*;
import org.omg.CosNaming.NamingContextPackage.*;
import org.omg.CORBA.*;
import org.omg.PortableServer.*;
import org.omg.PortableServer.POA;
import java.util.Properties;
class HelloImpl extends HelloPOA {
private ORB orb;
public void setORB(ORB orb_val) {
orb = orb_val;
// implement sayHello() method
public String sayHello() {
return "\nHello world !!\n";
// implement shutdown() method
public void shutdown() {
orb.shutdown(false);
public class HelloServer {
public static void main(String args[]) {
try{
// create and initialize the ORB
ORB orb = ORB.init(args, null);
// get reference to rootpoa & activate the POAManager
POA rootpoa = POAHelper.narrow(orb.resolve_initial_references("RootPOA"));
rootpoa.the_POAManager().activate();
// create servant and register it with the ORB
HelloImpl helloImpl = new HelloImpl();
helloImpl.setORB(orb);
// get object reference from the servant
org.omg.CORBA.Object ref = rootpoa.servant_to_reference(helloImpl);
Hello href = HelloHelper.narrow(ref);
// get the root naming context
org.omg.CORBA.Object objRef =
orb.resolve_initial_references("NameService");
// Use NamingContextExt which is part of the Interoperable
// Naming Service (INS) specification.
NamingContextExt ncRef = NamingContextExtHelper.narrow(objRef);
// bind the Object Reference in Naming
String name = "Hello";
NameComponent path[] = ncRef.to_name( name );
ncRef.rebind(path, href);
System.out.println("HelloServer ready and waiting ...");
// wait for invocations from clients
orb.run();
catch (Exception e) {
System.err.println("ERROR: " + e);
e.printStackTrace(System.out);
System.out.println("HelloServer Exiting ...");
// Copyright and License
import HelloApp.*;
import org.omg.CosNaming.*;
import org.omg.CosNaming.NamingContextPackage.*;
import org.omg.CORBA.*;
public class HelloClient
static Hello helloImpl;
public static void main(String args[])
try{
// create and initialize the ORB
ORB orb = ORB.init(args, null);
// get the root naming context
org.omg.CORBA.Object objRef =
orb.resolve_initial_references("NameService");
// Use NamingContextExt instead of NamingContext. This is
// part of the Interoperable naming Service.
NamingContextExt ncRef = NamingContextExtHelper.narrow(objRef);
// resolve the Object Reference in Naming
String name = "Hello";
helloImpl = HelloHelper.narrow(ncRef.resolve_str(name));
System.out.println("Obtained a handle on server object: " + helloImpl);
System.out.println(helloImpl.sayHello());
helloImpl.shutdown();
} catch (Exception e) {
System.out.println("ERROR : " + e) ;
e.printStackTrace(System.out);
}Edited by: 819887 on 10-Dec-2010 04:51
Edited by: 819887 on 10-Dec-2010 04:58Figure out the actual problem is when the naming service is resolving the name on line:
helloImpl = HelloHelper.narrow(ncRef.resolve_str(name)); -
I get Error Code 1 when using the installer. Please advise.
When running the installer, it quits with the message: Error Code 1. Please advise how to resolve @this error.
Gener7: Good morning. Thanks for speedy reply. I’m running Windows 7 on a Dell Studio laptop computer. I have CS6 installed, and it runs okay.
I ran the CC Cleaner tool to uninstall Photoshop CC. PCC kept crashing every time soon after I tried editing an image. I gave up. After the cleaning, I tried to re-install PCC. The error code 1 showed each time I ran the installer.
Please advise.
Thanks.
============== -
A licensing error has ocuured when using the Microsoft Expression Ultimate 4
yesterday I install Microsoft Expression Ultimate 4,then I install it .today I installed Microsoft Expression Ultimate 4,open it , it tells me "a licensing error has ocuured",then close ,why???
Honestly, I believe that this is an example of Trustworthy Computing where Microsoft has remove support for this application which may also include the licensing server which I am sure is or it has at one point been in use. Hence, anyone using that
program automatically shuts down the application.
I believe without Trustworthy Computing, we would be able to run the application in any case without closing upon downloading the validation code for your computer.
I think that Microsoft should repair the unsupported application at least to close in an open file state so that users who like to use expression studio can.
Deborah Willis-PhD -
How do you synchronize accesses to a LabVIEW Shared Variable?
I would like to create an ad-hoc weather station program (I'll explain more in a bit). I am using LabVIEW 8.0 Full Edition, and I would like to share data over a network between stations with the LabVIEW Shared Variable. Here's what I want to be able to do:
A node would start up, and begin publishing data to a network via a shared variable.
The shared variable is an array of clusters
The cluster information would hold things like:
Station Name
Station Location
Weather information cluster (temperature, rainfall, windspeed, wind direction, etc...)
Timestamp of last update
When a new node would like to enter, it would bind to the shared variable, grow the array, and add its information.
If a node's Station Name and Station Location is already in the shared variable, it would merely update the information in the cluster.
Viewing nodes could pop in, bind to the shared variable, and read/display the information at any time.
I am trying to enumerate problems with this before implementing, and I have run into a stinker of a problem that I am not sure how to solve. How do I synchronize accesses to the LabVIEW Shared Variable? If I read the variable, modify it, and write it back, I will undoubtedly run into a race condition where 2 nodes attempt to update its data and I will lose the data written by the first node - Node A reads, Node A modifies, Node B reads, Node A writes, Node B Modifies, Node B Writes, and thus the modifications made by Node A are lost. In my specific application losing some data isn't critical, but if not remedied this type of problem could cause massive amounts of data to be lost when there are numerous nodes, and that is definitely not acceptable.
Does anyone have any recommendations on how to synchronize the read-modify-write operations on the data in the Shared Variable?
-DannyWendy,
I am afraid Semaphores are not network-shared objects (to my knowledge), they are system-level objects that use operating-system synchronization mechanisms. If I were synchronizing on a single machine, a semaphore might be a valid mechanism; as an aside, most user-mode semaphores are designed to synchronize within a single process - to synchronize between processes you need to store the semaphore in the Kernel, and to synchronize over a network you would need a network node to handle serialization of requests. My Shared Variable is published over a network, and to my knowledge there are no network-published synchronization mechanisms available - mostly because there is no way to currently perform an atomic test-and-set on the Shared Variable (am I correct?) and there isn't a mechanism for blocking access to a Shared Variable from another network device/machine (or is there?). I've been looking for some way to implement an atomic test-and-set but I am running into a wall; I know that if I select the "single writer" attribute of the Shared Variable I can get LabVIEW to force a single writer allowing me to have an atomic "set", but I need more than that.
If only there was a network-shared Semaphore or some way to block other network accesses to the Shared Variable I would be in business - something like what I want doesn't exist, does it?
Thanks!
-Danny
Message Edited by texasdiaz on 02-23-2006 02:52 AM -
Why I get an error when running a sequence using the LabVIEW operator interface ?
I have a simple TestStand sequence calling LabVIEW vis that is giving me an error when I run it with the .exe version of the LabVIEW operator interface and I set TestStand to run the vis using the 8.2.1 runtime engine instead of the development adapter. I made a change in the operator interface to open a vi programatically and get the value of a control, this vi is also used in the TestStand sequence I am trying to run. Could this be causing my problem ?
ThanksHello Verdulken,
I have a few additional questions:
Does your application function correctly when running the LabVIEW operator interface you have created as a VI in the LabVIEW development environment (i.e. does this problem only occur when the LabVIEW operator interface is run as an executable)?
What is the error that you are receiving?
Regarding the VI that you open programmatically, do you open it in a visible manner (i.e. use the Show front panel when called option from VI Properties)?If so, do you also close this VI after it finishes (i.e. use the Close if originally closed option from VI Properties)?
Does the error occur on the step that calls this very same VI again later in the sequence?
Does your application function correctly if you use the development adapter for all of your calls?
Thank you in advance for this information,
Matt G.
National Instruments
Applications Engineering -
Error when running the LabVIEW program
hello...........
I'm newbie in LabVIEW....I have a problem when i'm running the LabVIEW program...i want to analyse data using the LabVIEW through the real experiment....
My problem is, there is an Error when i try to start the program...This Error forced me to restart the program several times until it can run.......By the way, i'm using Picoscopes 3206 to connect the LabVIEW program in PC with the real experiment.....
Here, I'm attached the picture that I snap when the Error occur....
Attachments:
error.JPG 222 KBYou have to try to isolate the problem...
Use 'Diagram disable' or 'Case' structure to run special part of code or try write a specific code to access and manage your equipment.
Several questions could help:
- Are you up to date with your hardware driver?
- Do you call external ressources (ex: dll)? perhaps with instability
- Do you properly close connection with your equipment after using?
- With your offline mode, do you load all the code, including hardware driver or do you use a special method without no loading the specific code?
- When you are able to run after many tries, is the program stable? Can you re-start it without exiting LabVIEW? -
Sometimes when using my labtop it happens that I get unwanted connections when using the wiring tool because my labtop notices mouse clicks that never happend. Usually you can get rid of those connections by pressing ESC. But unfortunately now and than LabView crashes completely when pressing ESC to get rid of the connection.
How can I stop LabView from crashing in that case?
Thanks for anybodies help!Yes, I see this problem on both my LabView-Computers but more often on the labtop because of the strange integrated mouse.
Yes, I get an error message but I can't really translate it in english. It says something about memory access to a special address.
I might try reinstalling LabView one day if I have the time. I don't want to try LabView 7.0. I'm afraid it would be great. Unfortunately my boss alreday told me, we don't have money for the new version.
Thanks for your help! -
Trying to Install RMS application 13.2.2 and I get past the pre-installation checks and when I get to the Data Source details and enter the data source details with the check box checked to validate the schema/Test Data Source I get the following error:
Error Connecting to database URL jdbc:oracle:oci:@rmsdbtst as user rms13 java.lang.Exception:UnsatisfiedLinkError encountered when using the Oracle driver. Please check that the library path is set up properly or switch to the JDBC thin client oracle/jdbc/driver/T2CConnection.getLibraryVersioNumber()
Checks performed:
RMS Application code location and directory contents:
[oracle@test-rms-app application]$ pwd
/binary_files/STAGING_DIR/rms/application
[oracle@test-rms-app application]$ ls -ltr
total 144
-rw-r--r-- 1 oracle oinstall 272 Dec 7 2010 version.properties
-rw-r--r-- 1 oracle oinstall 405 Jan 16 2011 expected-object-counts.properties
-rw-r--r-- 1 oracle oinstall 892 May 13 2011 ant.install.properties.sample
-rw-r--r-- 1 oracle oinstall 64004 Jun 6 2011 build.xml
drwxr-xr-x 9 oracle oinstall 4096 Jun 16 2011 rms13
drwxr-xr-x 3 oracle oinstall 4096 Jun 16 2011 installer-resources
drwxr-xr-x 3 oracle oinstall 4096 Jun 16 2011 antinstall
drwxr-xr-x 2 oracle oinstall 4096 Jun 16 2011 ant-ext
drwxr-xr-x 5 oracle oinstall 4096 Jun 16 2011 ant
-rw-r--r-- 1 oracle oinstall 11324 Dec 18 09:18 antinstall-config.xml.ORIG
-rwxr-xr-x 1 oracle oinstall 4249 Dec 18 10:01 install.sh
drwxr-xr-x 4 oracle oinstall 4096 Dec 18 10:06 common
-rw-r--r-- 1 oracle oinstall 16244 Dec 19 10:37 antinstall-config.xml
-rw-r--r-- 1 oracle oinstall 689 Dec 19 10:37 ant.install.log
[oracle@test-rms-app application]$
Application installation:
[oracle@test-rms-app application]$ ./install.sh
THIS IS the driver directory
Verified $ORACLE_SID.
Verified SQL*Plus exists.
Verified write permissions.
Verified formsweb.cfg read permissions.
Verified Registry.dat read permissions.
Verified Java version 1.4.2.x or greater. Java version - 1.6.0
Verified Tk2Motif.rgb settings.
Verified frmcmp_batch.sh status.
WARNING: Oracle Enterprise Linux not detected. Some components may not install properly.
Verified $DISPLAY - 172.16.129.82:0.0.
This installer will ask for your "My Oracle Support" credentials.
Preparing installer. This may take a few moments.
Your internet connection type is: NONE
Integrating My Oracle Support into the product installer workflow...
[move] Moving 1 file to /binary_files/STAGING_DIR/rms/application
Installer preparation complete.
MW_HOME=/u01/app/oracle/Middleware/NewMiddleware1034
ORACLE_HOME=/u01/app/oracle/Middleware/NewMiddleware1034/as_1
ORACLE_INSTANCE=/u01/app/oracle/Middleware/NewMiddleware1034/asinst_1
DOMAIN_HOME=/u01/app/oracle/Middleware/NewMiddleware1034/user_projects/domains/rmsClassDomain
WLS_INSTANCE=WLS_FORMS
ORACLE_SID=rmsdbtst
JAVA_HOME=/u01/app/oracle/jrockit-jdk1.6.0_45-R28.2.7-4.1.0
Launching installer...
To make sure I have connectivity from the app server to the database (on a database server) here are the steps followed:
[oracle@test-rms-app application]$ tnsping rmsdbtst
TNS Ping Utility for Linux: Version 11.1.0.7.0 - Production on 19-DEC-2013 10:41:40
Copyright (c) 1997, 2008, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = test-rms-db.vonmaur.vmc)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SID = rmsdbtst)))
OK (0 msec)
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ sqlplus rms13@rmsdbtst
SQL*Plus: Release 11.1.0.7.0 - Production on Thu Dec 19 10:46:18 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ ping test-rms-db
PING test-rms-db.vonmaur.vmc (192.168.1.140) 56(84) bytes of data.
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=1 ttl=64 time=0.599 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=2 ttl=64 time=0.168 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=3 ttl=64 time=0.132 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=4 ttl=64 time=0.158 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=5 ttl=64 time=0.135 ms
--- test-rms-db.vonmaur.vmc ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4001ms
rtt min/avg/max/mdev = 0.132/0.238/0.599/0.181 ms
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ uname -a
Linux test-rms-app.vonmaur.vmc 2.6.18-128.el5 #1 SMP Wed Jan 21 08:45:05 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ cat /etc/*-release
Enterprise Linux Enterprise Linux Server release 5.3 (Carthage)
Red Hat Enterprise Linux Server release 5.3 (Tikanga)
[oracle@test-rms-app application]$
The database is created and all the batch file scripts have been successfully deployed. Now working on the application server. The Weblogic server is installed and 11g forms and reports are installed successfully.
Any help would be helpful.
Thanks,
Ram.Please check MOS Notes:
FAQ: RWMS 13.2 Installation and Configuration (Doc ID 1307639.1) -
I have installed the new up to date itunes which i can open on my PC, however when i connect my ipad or iphone i get an error saying i cannot use the device as the require software isn't installed?? I'm very confused please help......
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
Multivalue error when using the previous() function
I am getting a multivalue error when using the previous() function on a dimension object in the report. I thought that the previous function was supposed to look at the current report and then look at the previous record's contents. How could this possibly give me a multivalue error when the value is clearly output in the previous row? Anyone have any ideas?
By the way, this is a valuable function for the types of reports that I design. The next() function would be even more valuable.
Thanks for your help.Hi Michael,
Could you please test the following solutions it might help you to resolve the issue.
Solution1:
Use slice and dice to reset all the tables that have #multivalue in it. The only problem with this workaround is they have to do the formatting manually.
Solution2:
Also, test the issue by changing the object to dimension if it is a measure or to measure if it is a dimension.
Regards,
Sarbhjeet Kaur
Maybe you are looking for
-
The power button on my iPhone broke a few months ago, so I have been using the assisted touch feature to lock the screen. Last night, in the middle of using an app, the phone froze and nothing working except the assisted touch icon (I could use it a
-
I cannot connect to the net through my TC with pppoe
I used to connect to the internet using my TC as a router, connecting via PPPoE using a DSL modem. While my ISP had a problem with their network, the TC stop connecting to the PPPoE host and the amber light kept blinking. Because this was taking too
-
My 808 won't connect to Wifi. Needs a reboot to do...
Hi, I've had the 808 since the initial release in India, i.e since August 13. Got it replaced once for the purple tint issue. Though the replacement set has some issues with touchscreen response, but I've learned to live with it. And everything else
-
Hi, currently I have PDK 6.0 that contains the epa file "com.sap.portal.pdk.PortalDevelopmentKit-2004-03-25.epa", I am wondering if there is a "How To Install PDK 6.0" guide anywhere? I'm new here, so please advise on how to reward points after quest
-
PBR for a locally configured router IP address
Hello community ! I am trying to perform a very specific thing. I would like to perform a PBR for a subnet range located remotely. However one of the IP of this subnet is configured locally on the router (interface IP @) ! I know that PBR takes prece