A/P invoice with discount copied to A/P credit note gives error.

I am using SAP B1 2005B version.
When I try to create a A/P credit note based on an A/P invoice which has some discount amount. the system gives a message to specify the G/L account. but if I try to specify the G/L account entry field is greyed out. so we cannot enter any thing there.
Kindly help.

Dear Selin Kingsley
Also Check Note 639207.
1. Find out the item's "Set G/L Accounts By" in the credit memo that
failed to add. (Item Master Data>Inventory tab)
If the item is managed by Warehouse, go to Administration ->Setup
->Inventory ->Warehouse->bring up each warehouse(Please make sure each
warehouse is set up)->define 'Sales Credit Account'
If it is managed by Item Group, go to Administration ->Setup ->Inventory
->Item Groups->bring up each Item Groups (Please make sure each Item
Groups is set up)->->define 'Sales Credit Account'
2. If the previous step still does not work, go to Administration>
Definition> Financials>G/L Account determination>Sales tab and Inventory
tab-> define 'Sales Credit Account'
I hope the information is helpful.
Regards,
Raghu N
SAP Business One Forums Team

Similar Messages

Cannot embed pdfs in MS Word doc which are PDF Version 1.3 (Acrobat 4.x) [This is associated with Adobe Reader 9]. Getting 'program not installed' error.

Cannot embed pdfs in Word doc which are PDF Version 1.3 (Acrobat 4.x) [This is associated with Adobe Reader 9]. Getting 'program not installed' error.
Pdfs with other versions are okay:
Tested successfully with Adobe Pro 9 (Version 1.5 (Acrobat 6.x)), Reader X (Version 1.4 (Acrobat 5.x)) and XI (Version 1.6 (Acrobat 7.x))
Also cannot open embedded pdfs which have been embedded with this version (getting a similar error).
Importantly I have removed/disabled all security options in Adobe Reader, following numerous internet suggestions from Adobe and elsewhere. This does not fix the problem.
Currently the work around is to re-save the pdf with something other than Adobe Reader 9 (so the version updates), but we would prefer not to do this for all the old pdfs we have.
Thank you,
Louise.

Could you please email me the document on which you are seeing this issue at [email protected] ?
Please mention the forum thread link as well in the mail for the reference.
Thanks,
Atul

Uploading Invoice with Discount in Line with DTW

I am trying to upload some invoices with line discount with the DTW . These is an example. There is one item A00001 with 12.00 unit price and 10% discount on that item and 12 quantity. I tried to upload it but doesnt put the discount in the discount column and changes the unit price to 10.8 even though i tell it to be 12.00
I tried putting only the priceaftervat AND also putting only the price but same results
Here is an example. These test only has 1 article so i didnt paste the header, only the lines
RecordKey     LineNum     DiscountPercent     ItemCode     LineTotal     PriceAfterVAT     Price     Quantity     TaxCode
RecordKey     LineNum     $     ItemCode     LineTotal     PriceAfterVAT     Price     Quantity     TaxCode
1     1     10     A00001     108     10.8     12     10     IVA
any ideas??

Hector,
In Administration > System Initialization > Document Setting > General Tab.....Calculate the Row Total using Unit Price should be unchecked
Now try entering the price and discount and it should work
Suda

How to deal with payment of vendor to us (credit notes I guess)

Normally I use F07 for outgoing payments, it's linked to vendors, but how to deal with incoming payments of vendors?
We got paid two invoices(credit notes I guess) and I want to put them under the right vendor, but how do I do it?
I can't use F07 I think because I need to use positive amounts (for normal purchase invoices) and can't use negative amounts in this transaction. F08 is for ingoing payment but that session is linked to customers I thought..not for vendors?
How to deal with this kind ot transactions? What transaction can I use the best for payments like this
(we got paid an amount , no invoices yet, but I know the vendor).

whith F-02 it is possible I noticed.

How to post a discount from supplier in AP Credit Note

Dear Experts,
I have posted an AP Invoice that buys an item for $10, then my supplier gave me a discount of $2 and Im supposed to open a Credit Note for him for this discount.
How can I key this scenario on a Credit Note so that my cost can be captured as $8 accurately. Any workarounds? so long the end result is correct.
Much Thanks!
Warmest Regards,
Chinho

Hi
If vendor Gives Discount for the Item after The AP Invocie posted then u should not use Credit note against this bcoz it will reduce the stock as well... U may know this....
To Have the discount u can use the discount field in outgoing payment against that invoice....
r if u want to affect ur item cost then u have to use inventory revaluation to Revaluate the Item .
Giri

Invoice in F-43 & subsequent receipt of Credit note from the vendor

Hi Guys
I have received a vendor invoice and the same has been passed using F-43
The Accounting impact will be
Expenses A/c Debit 1000
To Vendor A/c 1000
90% of the above invoice has been paid
Now few issues with our vendor and the balance to be paid for a particular vendor has been reduced by 10%. The vendor has issued a credit note and the same should be accounted
Which transaction code i will use at this scenario - once this transaction is passed in FI, my open item of 10% should be zero automatically. i.e. once the second entry is passed the open item should be referred in that entry so that for the vendor no open item will exists
I can very well go to FB65 and pass a entry for this, then go to F-44 and manually clear the same
But we dont want to do the manual entry. So when the credit note is passed it will take the reference of the actually entry and give a impact on the same
Thankyou
Warm Regards
Bala

Hi
Iam not very sure why you have mailed me the link - which is related to F110
Hope iam not clear with my post
In simple terms - i got a invoice from my vendor for a PO and later on iam getting a negative invoice (Credit Memo issue ) by the vendor to me
Now after passing the transaction in MIRO for credit memo with PO reference - if i go to FBL1N for the vendor - the impact of the above two entries should get nullified and only the net balance should be displayed
Warm Regards
Bala

Self-billing invoices dosn't calculate the WHT for credit notes

Hi Gurus,
There is a Credit Note document xxxxxxxx which does not contain the WHTax amount.
But when I checked the Document for that company code, I found that the WHTax amount has been populated in the corresponding vendor line item of this Document.
Can you suggest what could be the reason...
Thanks

Hi Experts,
Any suggestion?????
For your further information - The invoice was correctly showing the WHT in it however the credit note is not showing the WHT in it. Also the vendor was flagged with the WHT.
Thanks

A/R Down Payment Invoice with Discount

Hi,
I have a design question about the "A/R Down Payment Invoice" functionality in SAP B1 (version 8.81 PL09). Consider the following example:
I have a sales order with "total before discount" of 1000 euro. Customer gets 10% discount on this order, so order total is 900 euro.
I ask the customer to pay 300 euro of these 900 euro in advance (= down payment). I create a A/R Down Payment Invoice, I copy the sales order into the invoice. Then, I see the following on my screen: Total before discount = 1000 euro (which is correct), Down Payment = 90% = 900 euro. This is not correct, because 90% down payment would be 810 euro.
I go further and give 300 euro in as "down payment" and I ignore the wrong "down payment percentage". When I create my lay-out for my "down payment invoice", it is not possible to get the discount (of 10% = 100 euro in this example) printed. I only find the following information in the database table (ODPI): Total before discount = 1000 euro (correct), Discount percentage = 70% (NOT correct, should be 10%), Down Payment percentage = 30% (NOT correct, should be 33,33%).
This looks like a huge mistake in the design of a "down payment invoice" in SAP B1. How can I fetch the following data from the database:
1) Total before discount = 1000 euro
2) Discount 10% = -100 euro
3) Total after discount = 900 euro
4) Down payment = 300 euro
I can do line 1 and 4, but cannot find a way to retrieve line 2 and 3.
Regards,
Pieter

Hi Pieter,
Where did you set the discount? Is it on document level?
Have you tried on line level?
Thanks,
Gordon

Deployed a new computer with MDT 2013, but Windows licensing did not give me an initial grace period

Hi all,
Strange issue. I have created a Windows 7 x64 gold image to be deployed. When creating the image, I allowed Sysprep to rearm Windows. I've deployed about 10 computers in the past week and everything has worked fine.
Yesterday, I deployed another two computers. One works fine, but when I logged into the second one, I was greeted with the you need to activate Windows now screen. I was confused so I ran slmgr /dlv and sure enough my license status was not "Initial
Grace Period" but instead "Notification." (by the way, it did show remaining rearms as 2, which is expected since it was rearmed with sysprep when capturing the image, so we know it was in fact rearmed).
So my question is how and why did this happen? I was in a hurry so I just ran slmgr /rearm to burn off another rearm. I plan on putting in a KMS server at the end of the week, but I'm worried if I should redeploy the image to this machine since something
appears to be wacky.
Anyone seen this before or have any thoughts on the matter?

Either way, it was correct when I checked it today so maybe it corrected itself after Windows was installed? Not sure how else to explain this one.
Me either.
After Windows is installed, if you are domain-joining, the clock will sync to your Domain Controller.
If not domain-joined, Windows will try to sync to time.windows.com (or similar).
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Trying to copy an item to usb drive gives error item is busy

I purchased an iomega 500gb external usb drive for my powermac G4 mirror doors but it was unusably slow due to the mac only having usb 1.
Today I purchased a Belkin 5 port PCI USB 2 card and connected it up.
The Mac recognised the card immediately and the drive when connected. It will play videos that are already on the drive but when I try to copy a video on the computer to the drive it refuses to copy saying that the item is busy.
I really need to copy about 200GB of dv files to the drive for backup so any suggestions please - Thanks

Some (most?) USB drives come formatted to FAT32.
Reformat it (Disk Utility Partitions, and click on "Options..." also)
Or get a FireWire drive that would be bootable as well, and faster (and much much lower cpu overhead).

Clearing between customer and vendor invoice with F110 transaction

Hello,
I have an issue related to the functionalities of the transaction F110.
I'd like to clear the vendor invoice with the custome invoice.
Customer and vendor records are linked properly and the flag 'Clrg with Cust.' is set on vendor and 'Clearing with Vendor' is set on customer.
Both the invoice are in USD and the amount in document currency of the vendor invoice is > of the amount in document currency of the customer invoice.
I entered in both the invoice the same payment method (outgoing payment method).
The error that I can see in the proposal log is related to the customer invoice and is:
Payment method selection for items due now to the amount of USD 500,00
Due items with currency USD, pmnt method - items total is > 0
..none of the payment methods defined can be used for these items
information re. vendor xxxxxxxx / customer yyyyyyy / paying company code TS01 ...
.. payment not possible because of reported error
According to the log of the proposal the vendor invoice can be paid.
If I click on display proposal and double click on the customer invoice (with red light) I can read the note:
No pymt possible because items with a debit
Following the settings of the payment method used:
Payment method in the country
- Payment method for outgoing payment selected
- Bank transf. selected
- allowed for personal payment flagged
- Bank details flagged
- Document type for payment XX
- clearing document type XX
- Use classic payment medium program selected
Currency allowed: This table is empty (will mean that all currencies are permitted)
Payment method in company code
Minimum amount: 0,01
Maximum amount: 9.999.999.999,99
Distribution amnt: 0,00
Single paymentfor marked item selected
Foreign business partner allowed selected
foreign currency allowed selected
Cust/vend bank abroad allowed? selected
Bank selection control "No optimization" selected
Can you please help me to understand the error?
I'm afraid it is a problem with the bank but I don't understand why the payment of the vendor invoice is allowed and the customer invoice not.
Thank you very much in advance
Kind R

Hello,
I have an issue related to the functionalities of the transaction F110.
I'd like to clear the vendor invoice with the custome invoice.
Customer and vendor records are linked properly and the flag 'Clrg with Cust.' is set on vendor and 'Clearing with Vendor' is set on customer.
Both the invoice are in USD and the amount in document currency of the vendor invoice is > of the amount in document currency of the customer invoice.
I entered in both the invoices the same payment method (outgoing payment method).
The error that I can see in the proposal log is related to the customer invoice and is:
Payment method selection for items due now to the amount of USD 500,00
Due items with currency USD, pmnt method - items total is > 0
..none of the payment methods defined can be used for these items
information re. vendor xxxxxxxx / customer yyyyyyy / paying company code TS01 ...
.. payment not possible because of reported error
According to the log of the proposal the vendor invoice can be paid.
If I click on display proposal and double click on the customer invoice (with red light) I can read the note:
No pymt possible because items with a debit bal.still exist; see job log
Following the settings of the payment method used:
Payment method in the country
- Payment method for outgoing payment selected
- Bank transf. selected
- allowed for personal payment flagged
- Bank details flagged
- Document type for payment XX
- clearing document type XX
- Use classic payment medium program selected
Currency allowed: This table is empty (will mean that all currencies are permitted)
Payment method in company codeMinimum amount: 0,01
Maximum amount: 9.999.999.999,99
Distribution amnt: 0,00
Single paymentfor marked item selected
Foreign business partner allowed selected
foreign currency allowed selected
Cust/vend bank abroad allowed? selected
Bank selection control "No optimization" selected
Can you please help me to understand the error?
I'm afraid it is a problem with the bank but I don't understand why the payment of the vendor invoice is allowed and the customer invoice not.
Thank you very much in advance
Kind Regards
Emanuela

Create Invoice with RV_INVOICE_CREATE

hi buddies, I want to create invoice with reference to sales orders and delivery notes, Can I use FM:RV_INVOICE_CREATE for both?
I have tested this FM, and seems no errors, but no documents created when check the invoice table vbrk...
thanks!

Hi,
you can use RV_INVOICE_CREATE, you can do commit only after checking the XVBFS internal table , and look for Success message then only you need to use COMMIT.
Note: XVBFS is the log internal table, here you can see success and error log.
check this internal table after execution of the FM for log details(success/error).
Regards
vijay

Post Vendor invoice with Down Payment via BAPI_INCOMINGINVOICE_CREATE

Hi Experts,
We have configured downpayment functionality for PO's. We have below process
Create PO with down Payment request -> Create down payment request -> Run payment program for paying down payment -> Post GR -> Post invoice with BAPI (considering down payments against invoice)
But unfortunately when I am trying to post PO invoice with downpayment details using BAPI_INCOMINGINVOICE_CREATE I do not see any fields related to down payment. Can some one confirm me if SAP has provided this functionality? if NO any workarounds?
Rgds,
Harish

Hi experts,
any suggestions?
Regards,
Elena

Cannot create an Invoice with a negative line

I am tring to export an invoice with a negative row and I'm gettign an error here is an examlpe of what I'm doing .
Dim vDrafts As SAPbobsCOM.Documents
     Set vDrafts = vCmp.GetBusinessObject(oDrafts)
    vDrafts.DocObjectCode = oPurchaseInvoices
    vDrafts.CardCode = "2"
    vDrafts.ManualNumber = "222"
    vDrafts.HandWritten = tNO
    vDrafts.DocDate = Now
    vDrafts.DocType = dDocument_Service
    vDrafts.DiscountPercent = CDbl("0")
    vDrafts.Lines.AccountCode = "100000"
    vDrafts.Lines.ItemDescription = "TEST"
    vDrafts.Lines.Price = 123
    vDrafts.Lines.Quantity = 1
    vDrafts.Lines.VatGroup = "6S"
    vDrafts.Lines.DiscountPercent = CDbl("0")
     vDrafts.Lines.Add
    vDrafts.Lines.AccountCode = "100000"
    vDrafts.Lines.ItemDescription = "TEST"
    vDrafts.Lines.Price = -13
    vDrafts.Lines.Quantity = 1
    vDrafts.Lines.VatGroup = "6S"
    vDrafts.Lines.DiscountPercent = CDbl("0")
    RetVal = vDrafts.Add
and if I change to
    vDrafts.Lines.Price = 13
    vDrafts.Lines.Quantity = -1
then the invoice will be exported but the line will be positive .
Do you have any idea on what is wrong .
Thanks

Hi Mohamed,
SBO will not let you set a negative line if the total amount of the document is negative.
It can be done by hand in SBO, so you should be able to get it. Try doing the same as you do it by hand.
I would try something like:
vDrafts.Lines.Quantity = 1
vDrafts.Lines.Price = -13
Hope helps,
Ibai Peñ

Credit Note Request with reference to an invoice

Hi All,
We are creating a Credit Note Request referring an invoice. A Credit Note is then created referring to the Credit Note Request. However both the invoice and credit note shows as open items FBL5N.
Please help how do we get the invoice amount to be cleared once the credit note is created referring to the same? Please find below the document flow:
Sales Order => Invoice => Credit Note Request => Credit Note.
Regards,
Rajesh Singh

Hello,
there is not any functionality to make billing document and credit memo automatically cleared in accounting.
Only in case of cancellation (by VF11) it is possible that cancelled invoice and cancellation invoice are automatically cleared in accounting.
Sorry for the negative answer.
Best regards,
Ivano.

A/P invoice with discount copied to A/P credit note gives error.

Similar Messages

Maybe you are looking for