A printing vi gave error,what​'s the meaning of "refmum invalid"

i modified my program which used to print out only 3 of my 9 graphs, now the program gave an error :code 1055, refnum invalid. can anybody help me to see what's wrong with my printing vi.
Attachments:
print_graphs.vi ‏103 KB

I don't think anything is wrong with it. I think that you are not passing in a reference correctly for one of your graph references. Once I cleaned it up a little, it looks like it should be working properly. Maybe you can run it with execution highlighting turned on to find out which refnum is invalid.
Hope that this helps!
Bob Young
Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
DISTek Integration, Inc. - NI Alliance Member
mailto:[email protected]

Similar Messages

  • Print a custom Error message in the XML bursting program's log file...

    Hi,
    I having this requirement, where i need to print a custom error message in the xml bursting program's log file.
    Actually i am having a report where i create invoices and then those invoices are emailed to the respective customers, now say if a customer has three contacts and there is only two valid email id's so what happens is bursting will be successful for two contacts whereas the third contact dosen't get any emails. when this happens i need to log a message in the bursting programs log file stating a custom message.
    Two things i want to know..
    1- Whether is it possible to write into the xml bursting programs log file
    2- If yes, then how..
    note: it ll be greatly appreciated if the answer is elaborated.
    thanks,
    Ragul

    Hi,
    I having this requirement, where i need to print a custom error message in the xml bursting program's log file.
    Actually i am having a report where i create invoices and then those invoices are emailed to the respective customers, now say if a customer has three contacts and there is only two valid email id's so what happens is bursting will be successful for two contacts whereas the third contact dosen't get any emails. when this happens i need to log a message in the bursting programs log file stating a custom message.
    Two things i want to know..
    1- Whether is it possible to write into the xml bursting programs log file
    2- If yes, then how..
    note: it ll be greatly appreciated if the answer is elaborated.
    thanks,
    Ragul

  • What's the mean of  error infomation ?

    tail /var/adm/messages
    it shows as follows
    Feb 4 09:32:44 mail3 last message repeated 1 time
    Feb 4 09:34:45 mail3 SRS Proxy[1397]: [ID 663108 daemon.error] Could not upload bulk message
    Feb 4 09:34:47 mail3 SRS Proxy[1397]: [ID 388765 daemon.error] Could not send message from queue: /var/SUNWsrspx/SRSQueueStore/store/queues/REGISTRATION/registration
    Please tell me what's the mean?? thank you !!

    One more time:
    This appears to be some kind of Sendmail error, not an iMS error. First, iMS does not normally log anything to /var/adm, so errors you see there are very unlikely to be from Messaging Server.
    Second, none of us here really is likely to know sendmail well.
    I would first check that you haven't installed some patch that has restored sendmail. Normally, on install of iMS, we replace Sendmail with our "compatibility" binary. Patching can replace that with real Sendmail, and your startup scripts can start Sendmail, preventing iMS from fully starting. Please check that.
    If you believe that this is an error coming from iMS, then you will need to provide some context, like where the message shows, and any other symptoms. This bare error message doesn't really allow me to help you,.

  • HT201210 my iphone 3 couldn't restore, its saying the error 46. what is the meaning of error 46?and how can i resolve it?

    my iphone 3 couldn't restore, its saying the error 46. what is the meaning of error 46?and how can i resolve it?

    It doesn't matter when you installed antivirus software; if you have it on your computer it will frequently block access from applications to sites it does not know about. A sync does not require access to a site not on your computer; an upgrade clearly does. So if you have never jailbroken any device you do not need to be concerned about your hosts file, but you DO need to temporarily disable your antivirus during the update process.
    The hosts file is an operating system file on all computers that overrides DNS lookup. In order to jailbreak or hack an iDevice the programs that do it need to redirect iTunes so it does not go to the Apple activation server, but instead goes to the hacking program for activation instructions. It does this by adding a record to the hosts file that bypasses the DNS lookup for gs.apple.com. But you don't have to be concerned about this.

  • Hello, i've win7 64bit and can use my adobe acrobat 7.0.0.2004121400. but it is not possible to print a pdf - error 20225 at the installation of acrobat. any ideas how to solve this problem? I've tryed some instructions from internet concerning this 20225

    hello, i've win7 64bit and can use my adobe acrobat 7.0.0.2004121400. but it is not possible to print a pdf - error 20225 at the installation of acrobat. any ideas how to solve this problem? I've tryed some instructions from internet concerning this 20225 error, but without success. thanks a lot and best regards

    BS heißt "Bull___****". *lol* "Betriebssystem" heißt imemr noch "operating system". GoLive wirste wohl gar nicht zum laufen kriegen. ohnehin würde man es nicht mehr verwenden, weil es noch nicht mal CSS2 voll unterstützt geschweige denn HTML 5 und andere moderne Webstandards. Wenn überhaupt, dann findeste vielleicht noch 'ne OEM CD von Strato oder 1und1 bei eBay. Die haben das damals mit jedem neuen Hostingvertrag rausgehauen. Aber wie gesagt, es ist den Aufwand nicht wert. Illustrator sollte sich durchaus installieren lassen. Eventuell einfach nochmal die Installer im Win XP Kompatibilitätsmodus laufen lassen...
    Mylenium

  • HT2736 Hello I bought from Alstor application error, what is the solution to the problem

    Hello I bought from Alstor application error, what is the solution to the problem

    All purchases are considered final, but you can try the 'report a problem' page to contact iTunes Support and see if they will credit or refund you : http://reportaproblem.apple.com
    If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • What's the meaning of the error code 1009?

    What's the meaning of the error code 1009?

    See this support document http://support.apple.com/kb/TS3694 if you are doing a restore.
    Another option is you are trying to access an iTunes store that is not supported in your country.

  • Getting BAM Error: BAM-06008: The XML payload is invalid; extra contents we

    Hi All,
    Version: 11.1.1.4
    We are getting the BAM Error: "BAM-06008: The XML payload is invalid; extra contents were found" after I added a another field to a BAM Object. I can see the new field in BAM and I can also see it when I pull up and map to a BAM adapter in my SOA composite. However, when I have the process send a payload with the newly added field it fails with the above error. However, if I add a new data object in BAM with the field it works fine. What would be causing BAM to think that the newly added field should be in payload?
    Any suggestions would be greatly appreciated.
    --S                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

    If the layout of the data object changes then you need to restart BAM server for changes to take effect. Also make sure, your mapper file isn't adding extra elements than expected.
    Thanks
    Jahangir Pasha

  • Could you tell me what's the meaning of the logfile-path and log-level?

    we are running an productive xml database. but it is not stable now. Sometime it would report resource conflict error while you access xmldb via http protocol. I read the database logs and listener logs, but no abnormal message could be found. So, I want to find more information from the xmldb logs. While I run select DBMS_XDB.cfg_get().getclobval() from dual, I found that there are several logfile-path and log-level tags and I guess that these would be xmldb logs. Does anyone know what's the meaning of these tags?

    I wondered about that one often too. I didn't have a chance yet to investigate (but maybe Mark will elaborate a little here), my guess is that it / or will be a possibility to enable tracing regarding the protocols or servlets.
    Though It look like if you enable it it will trace to the XML file defined in the xdbconfig.xml. I also guess that (because there is also a XSD counterpart) that one could create an resource that streams the errors into a XDB ftp or http or ... xmltype table based on these settings.
    This would be great because it would mature the protocol server regarding functionality. You could enable the tracing and see what happens. Until now the documentation doesn't give much extra insight...
    <!-- FTP specific -->
    <element name="ftpconfig">
    <complexType><sequence>
    <element name="ftp-port" type="unsignedShort" default="2100"/>
    <element name="ftp-listener" type="string"/>
    <element name="ftp-protocol" type="string"/>
    <element name="logfile-path" type="string" default="/sys/log/ftplog.xml"/>
    <element name="log-level" type="unsignedInt" default="0"/>
    <element name="session-timeout" type="unsignedInt" default="6000"/>
    <element name="buffer-size" default="8192">
    <simpleType>
    <restriction base="unsignedInt">
    <minInclusive value="1024"/> <!-- 1KB -->
    <maxInclusive value="1048496"/> <!-- 1MB -->
    </restriction>
    </simpleType>
    </element>
    <element name="ftp-welcome-message" type="string" minOccurs="0"
    maxOccurs="1"/>
    </sequence></complexType>
    </element>
    <!-- HTTP specific -->
    <element name="httpconfig">
    <complexType><sequence>
    <element name="http-port" type="unsignedShort" default="8080"/>
    <element name="http-listener" type="string"/>
    <element name="http-protocol" type="string"/>
    <element name="max-http-headers" type="unsignedInt" default="64"/>
    <element name="max-header-size" type="unsignedInt" default="4096"/>
    <element name="max-request-body" type="unsignedInt" default="2000000000"
    minOccurs="1"/>
    <element name="session-timeout" type="unsignedInt" default="6000"/>
    <element name="server-name" type="string"/>
    <element name="logfile-path" type="string"
    default="/sys/log/httplog.xml"/>
    <element name="log-level" type="unsignedInt" default="0"/>
    <element name="servlet-realm" type="string" minOccurs="0"/>
    ...etc...

  • What's the meaning?

    My ex-colleague has put the code in the application developed in 10g like this:
    <af:panelHorizontal rendered="#{empty bindings.exceptionsList}"
    halign="center">
    and there is a 'golink' inside this panelHorizontal .
    Please let me know what's the meaning #{empty bindings.exceptionsList} is and how this one control the link click? Thanks!

    thank you Vanka81, Thank you for reply.
    Currently, there are two roles can see the 'golink' under this panelHorizontal, but one role can click it and go to the target page, but when the other role click it, will get error '500 Internal Server Error...', I have no idea if it is caused by this rendered setting?
    Regards

  • TS3694 what is the meaning eror 1015

    what is the meaning error 1015?

    Means your phone was jail broken, and you will have to search the web for information on that.

  • What is the meaning of the black line in the Layer 2 View?

    In the layer 2 View,there are many black line indicate "Ethernet 100M",what is the meaning?Does it mean the device is an end device that connected PC only?

    Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen
    If anyone else in the forum has some advice, please reply to this thread.
    Thank you for posting.

  • MM - PO - what is the meaning of this button?

    Dear friends,
    Could anybody help me with one question.
    There is a strange button in a Purchasing Order on the Account Assignment tab page on this screenshot (it is marked with red color).
    Screenshot below
    http://content.foto.mail.ru/mail/raiden87/81/i-84.jpg
    What is the meaning of this button? When it is used for?
    I hope that anybody knows the meaning =)

    hi raiden,
    as for as i have gone through the issue I have come to know that:
    If you want to use multiple account assignment for a line item in PO then at that moment you will have to first press the "repeat on " button. only after that multiple account button will be active that is just before your "repeat on " button.
    Steps:
    1:Save your PO.
    2:Go to transaction code ME22N to change the PO.
    (Here you will firstly see that the multiple a/c assignment button is firsty gray.It will become active only after when you press the "repeat on" button).
    I hope It will be helpfull for you.
    regards,
    Aslam Ansari.

  • So I have an iPad with the smart cover, and it's usually supposed to turn on the iPad when u open it, but it's no doing that for me. Nor is it turning off without pressing the button. What is the meaning of this?

    So I have an iPad with the smart cover, and it's usually supposed to turn on and off the iPad when u open it and close it, but it's not turning on for me. Nor is it turning off without pressing the button. What is the meaning of this?what caused it to be this way? Is there someway that I could fix it?

    Wait a sec did this just start?
    You set up the smart cover function in settings (you did that, right?) so, if you did that and it's failed you make an appointment at your nearest Genius Bar now.

  • Cannot upload music says I O error what does this mean?

    When uploading tracks says high res best wav or aiff when track is chosen to upload says I O error what does this mean?Tried all types of files same thing!!
    == URL of affected sites ==
    http://www.jinglepunks.com

    connect it to your computer and open iTunes

Maybe you are looking for