A question about a screen protector

So one of the screen protectors for the Ipod Nano says, "Smooth, non-sticky surface with patented layer of UV protection to prevent "yellowing"" What does it mean by yellowing? Is the ipod screen kept from yellowing, or the screen protector itself?

Similar Messages

Question about iPad2 screen protector

I got a Great Shield screen protector for my new iPad. It was super easy to install and looks great. But when I saw it online, it had two holes at the top, one for the camera and one for the light meter (I think that's what it is, the tiny circle above the camera). The shield that I received and installed just had a hole for the camera, so the protector covers the littler hole. Is this a problem? The camera seems to be working fine, but I'm a bit concerned that it wasn't just as I saw it. Thanks - I'd appreciate hearing anyone's comments.

No it won't harm your iPad, but it might cause picture distortion on the edges of the photos. If your pictures look fine then you are OK.

One question about Selection screen

Hi experts,
I am writing a report, on the selection screen, I need to input the file path and then do the file upload.
My question is about how to check the file path I put is correct or not? If it is incorrect, I want to get a message and the cursor still in the field and don't jump to the next page.
How can I do like that?
Any one has any suggestion, please help me.
Thanks in advance.
Regards,
Chris Gu

Hi Chris,
    do it this way: check my code after calling gui_upload what condition i am using.
parameters:
p_file type rlgrap-filename.          " File name
*           AT SELECTION-SCREEN ON VALUE-REQUEST EVENT
at selection-screen on value-request for p_file.
perform get_file_name.
*                       AT SELECTION-SCREEN EVENT
at selection-screen on p_file.
perform validate_upload_file.
* Form GET_FILE_NAME
form get_file_name.
call function 'F4_FILENAME'
   exporting
     program_name        = syst-cprog
     dynpro_number       = syst-dynnr
     field_name          = ' '
   importing
     file_name           = p_file.
endform.                               " GET_FILE_NAME
* Form VALIDATE_UPLOAD_FILE
form validate_upload_file.
data:
    lw_file type string.              " File Path
lw_file = p_file.
call function 'GUI_UPLOAD'
    exporting
      filename                    = lw_file
      filetype                    = 'ASC'
      has_field_separator         = 'X'
      dat_mode                    = 'X'
    tables
      data_tab                    = t_final_data.
IF sy-subrc ne 0 and t_final_data is initial. " here message if file path is wrong
    Message 'File not found' type 'E'.
ELSEIF sy-subrc eq 0 and t_final_data is initial.
    Message 'File empty' type 'E'.
ENDIF.
endform.                               " VALIDATE_UPLOAD_FILE
With luck,
Pritam.
Edited by: Pritam Ghosh on May 8, 2009 8:57 AM

Should I get the iPod Touch? (Also a question about the screen issue)

Hi,
I recently purchased the 8GB iPod Nano, and now i'm considering to add a $100 and get the iPod Touch 8GB. Would you guys recommend it?
Another question I had was that I heard about the iPod Touch having some Screen Issues, and read somewhere that if the Box has a picture of Macy Gray then its Bad. But I personally think the Macy Gray image is for the 8GB, and the other artist is for the 16GB.
Is there a 100% definite way for me to find out if it has a good screen or not?
Thanks in Advance!
Saeid.

Ok, I recommend the iPod Touch. 8GB is fine, and totally worth the $$.
The screen issue has been fixed by a firmware update, so as long as you update to the latest firmware, you should be in the clear.
I have a 16GB macy Gray and it is working perfectly so far (1 week of ownership)
However, you mentioned using your iPod in the rain. If you do so, the Touch is not for you! I would not want to get water even near it, because the technology could be very very sensitive to water. It was raining here the other day (in Los Angeles) and I was so scared to use the touch that I took my 8GB 3gen Nano with me instead. And I was still scared to use that.
You will have to take the touch out and look at it if you are going to operate it properly.
The good news:
you can make playlists on the go! That means you can, while it is still dry, set a nice playlist without connecting to your computer. But, if the volume needs to be adjusted, there is a shortcut that would take just a bit of memorization and careful skill. In your pocket, you can double tap the home button, and then the volume, pause and track forward/backward "buttons" pop up. If you can memorize their position and hit them right, the Touch can be operated in your pocket. But make sure your hands are dry!
So it's up to you. I think quality wise, the Touch has had most of its bugs worked out. The only things that will come in the future are additional features.
Good luck and I hope you get it.

A question about keeping screen field unchangable in selection screen

Hello Expert,
I have a program as below.
REPORT Z_TEST.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-i01.
SELECT-OPTIONS: s_kappl FOR a017-kappl DEFAULT 'M' NO INTERVALS.
SELECTION-SCREEN: END OF BLOCK b1.
INITIALIZATION.
LOOP AT SCREEN.
    IF screen-name CS 'KAPPL'.
      screen-input = 0.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
When I executed the report, the field for S_KAPPL is unchangable. This is as expected. But if I select one variant, the filed will change back to changable.
My question is how can I keep the field unchangable after I select variant?
Thanks in advance,
Regards, Johnny

Hello Johnny,
When you're creating the variant you've to mark the check-box "Protect field" as true.
This will make the field as output only.
BR,
Suhas

A Few question about Dynpro (Screen)

- I have a screen. Its have a table control for selection data. When user select any line of table control I want set new screen... But user doesn't select any line don't permission for next user...
     if not ITabSelected is initial.
        Leave To Screen 200.
     else.
       Leave To Screen 300.
     endif.
But it doesn't working? How can I refresh current screen?
- How can I display status bar messages for mobile user? Can user display dialogbox?

And another question..
When I want update screen elemnt values via
DynpFields-Fieldname = 'ZWM460-MAKTX'.
DynpFields-FieldValue = MyMaktx.
DynpFields-stepl      = l_stepl.
Append DynpFields.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
    DYNAME                     = 'ZHYT_WM_RPR_460'
    DYNUMB                     = P_0064
TABLES
    DYNPFIELDS                 = DynpFields
EXCEPTIONS
   INVALID_ABAPWORKAREA       = 1
   INVALID_DYNPROFIELD        = 2
   INVALID_DYNPRONAME         = 3
   INVALID_DYNPRONUMMER       = 4
   INVALID_REQUEST            = 5
   NO_FIELDDESCRIPTION        = 6
   UNDEFIND_ERROR             = 7
   OTHERS                     = 8.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
it doesnt update element value. When I debugging. It is return sy-subrc = 0 everything ok for sap but I cann't update element value... Does anybody have any idea? Thanks

Question about "share screen" function

When I am watching at another persons screen, is there a way to hover your mouse over the remote computers window without it effecting the pointer on the remote computer?
Thank you

kevinmathie wrote:
Hi all,
I'm recording vocals on a song that has lots of ritardandi and rubato. While the vocalist is here, we'll be setting her part of the tempo mapping in "stone," so to speak, but not necessarily the instruments' tempo mapping between her verses or before her verses.
I usually record this kind of thing in Digital Performer, because I know that the audio sticks like glue to any ritardando, accelerando, etc., I may put in after recording the audio.
My question: Does the "Follow Tempo" box in Logic let me program in ritards after the audio is recorded, without messing up how the audio is synced to the sequence?
Yes.
In other words, if the audio region spans bars 12-24, and I plug in a big ritard at bar 15, followed by "a tempo" in 16 after the audio is recorded, will the audio region follow the tempo mapping?
Yes.
+"Plug in a big ritard"+ ? You are one tough composer!
2nd question: Does it do it automatically? Or, like Digital Performer, do I need to tell it to follow the tempo mapping after I change tempo?
No, it 'responds' to tempo events in the *tempo track*.
Any other tips/suggestions regarding this function that you feel would be helpful for me?
Yep, it can eat up RAM. When you enable follow tempo for a track, the whole audio file is loaded into RAM. Use a utility like MenuMeters to keep an eye on RAM use. http://www.pure-mac.com/diag.html#menumeters
You can find all relevant info on pages 526-527 of the *Logic Pro 8 User Manual*.
regards, Erik.

Question about Quiz Screens in Captivate 2

Is it possible to add an image to a quiz screen? I want to
make an assessment in Captivate using some of the quiz question
templates, but I want to add an image to it so the user can look at
the image for reference. Is that possible?
Or would it be better to create a scenario based learning
environment?

Hi Nicole
Hmmm, for that, I suppose I'd simply create a blank slide and
insert the image. Then insert your verbiage advising what the user
should do. I'd do that using Text Captions. Lastly, I'd insert a
Click Box object on the slide surrounding the area I want them to
click. Then configure your scoring and feedback as desired.
Voilà! No Question slide needed.
Cheers... Rick

Question about LCD screen on Satellite A500-1F4

Hi everyone.
I am planning to purchase new laptop and I've seen the specs of Satellite A500-1 F4 and Satellite L505-13W. I like the 16" screen in A500 but there is one thing not clear, what do they mean about truebright display? Compared to L505, it has HD LED display.
Also, what is much better video card? NVIDIA GE force or the ATI Radeon? Both the A500 and L505 have the same 1GB video card capacity, the difference in the brand.
Thank you.

You see, it's like with Cpu from Intel and Amd. Some users say that Intel is better, when others are Amd.

A60: Question about other screen resolutions

Hi,
I'm using a sattelite A60 with Ati Mobility Radeon 7000 IGP display adapter.
I thinking about buying a 24 inch external LCD screen with resolution: 1920*1200
According to the user's manual the maximum resolution is 2048*1536 but the widescreen resolutions are not listed at all in the table.
Does this screen work at my notebook?
Thanks!
Willem

Hi
Unfortunately Im not familiar with the 24 displays but like Quad said you can test you notebook on this LSD display. But usually you can use different display resolutions and you dont have to use the max display resolution.

Question about main screen

How do i get rid of the search option, agenda items, wlan scan and share online on my main screen?
it covers my screenpicture and i want to get rid of it.
Solved!
Go to Solution.

ah you can go to themes or somewhere around there and decide what standby screen you want you can have a blank standby screen if you chose to and then your picture will be visible
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

A question about the screen~~~

Hi, folks
I got a small question regarding the MBA screen. I just used a screen test software to see if there is any problem. when the background of the screen was set to completely black, I found the bottom fringe of the screen seemed a little brighter than other part.Have you guys did the similar test and have met similar problems?
thanks very much

You always get a bit of light leakage on screens (or uneven lighting). Thankfully with LED backlight screens, you do get a more even illumination across the whole screen.
In tests, viewing angles also have to be taken into account. I have to say on my Air, on black background the lighting seems pretty even.

2 questions about customizing screen

Hi.
* Is it possible to rearrange the order of the bind variables on a customization screen? The variables appear in the same order as they are stated in the query.
* I have a dynamic page. The page has some bind variables. When the user enters the correct format of parameters, it works ok. But when the user enters the wrong format (e.g. date and time) i get a browser 404. Can i prevent this? Like checks on the fields?
Thanks.

Hi,
You cannot change the order of the bind variables in the customization form unless you change it in the query.
You cannot have format masks for bind variables. You can change the label to also mention the date format the user should use to enter the value like "Date : (DD/MON/YY)"
Thanks,
Sharmila

Question about wide-screen monitor on Solaris x86

I have Solaris x86, version 10/2009 installed.
It works fine with any wide-screen monitor I plug in.
But when I use this 3rd party CAD/CAM software, any round
circle is being displayed as an oval shape. I believe that's because
on the wide-screen monitor, the width of the monitor is longer than the height.
Does anyone know if there's a setting to change so that I can view circles as true round circles instead of an oval shape? Thanks.

OK, I know what the problem is now.
But I need to change the resolution settings. Does anyone know how to change it on x86, version 10/2009?
I recall it being something like "kdmconfig"

Question about logon screen customization

Hi,
I have to customize the web logon screen of the BEx.
In SICF, on the BEx service, on the Error Pages tab, System logon is checked. If i click on the Setting button I have :
Define Service-Specific Settings
System ID
Language
System Messages
Logon and SI
etc ... and in "Logon Layout and Procedure", Sap Impl, Netweaver and SAP Tradeshow.
I have defined a header image in "Adjust Links and Images" and it works !
But ... on my logon screen I have 4 fields, which 3 of them a inactive (system, users and password) and the log on button. Only the drop down menu language is active. Users and Password fields content is "Via popup".
In order to logon myself, I have to select my language and enter in a system popup (not a web form) my login and my password. How can I change this boring sequence ? Isn't it possible to enter directly its logon and password in the first screen ?
Thanks for your help,
GC.

Hello CG,
I think you can pre-define your language, using the parameter 'BspLanguage', in the the url defined at 'Error Pages' of BEX service.
An example:
/sap/public/bsp/sap/system/login.htm?sap-url=<%=PATHTRANS%>&BspLanguage=EN
You can also do other things, such pre-define the client, or show the option to change the password.
An example:
Run default.htm of BSP system_public, to know the parameters available.
/sap/public/bsp/sap/system/login.htm?sap-url=<%=PATHTRANS%>&BspClient=010&BspChangePasswordVisible=X
Kind regards.

A question about a screen protector

Similar Messages

Maybe you are looking for