A question about bridge mode

I have a DSL modem which is set to distribute IP addresses. Wireless network is off.
A Time Capsule (connected to DSL modem by Ethernet) which is in bridge mode and creates the wireless network.
Question: should I be able to connect to Internet through a Ethernet connection at the Time Capsule?
thanks
Ken

I would first verify that the Time Capsule is setup as a bridge as follows:
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click Manual Setup
Click the Internet icon
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
If all appears to be well, try connecting the ethernet cable from your gateway to one of the other ports on the Time Capsule. In other words, if you have it connected to the WAN port (circle icon) now, connect to one of the other three LAN <-> ports.
Truth be known, when the Time Capsule is setup in bridge mode, all the ports behave the same. It does not matter which you use. If the WAN port has taken a hit from a nearby lightning strike or a power surge, the other 3 ports may still be operational.
Any luck?
Message was edited by: Bob Timmons

Similar Messages

  • Questions about TDM mode on an iMac

    Hi!
    I'm thinking about buying 2009-2010 27" iMac, it should replace my home server, display and audio system.
    Primarily, I will use it in TDM mode, and have some questions about it.
    Firstly, what about sound? iMac receives it over Mini DP, right? And if I'll connect HDMI device to iMac (PS3, looking forward to Xbox One, and MacBook Air over hdmi adapter), sound will be played over desktop's speakers, as it should?
    Second, and most interesting part: if connection scheme is MacBook Air->Mini DP to HDMI adapter->HDMI cable->HDMI splitter->HDMI to Mini DP cable->iMac in TDM, everything will work fine?
    Also interested about cables. For example, this cable http://dx.com/p/cy-dp-021-mini-displayport-to-hdmi-audio-extender-cable-white-1- 8m-177527 supports up to 1920x1200, but basically, both DP 1.2 and HDMI 1.3b supports 2560x1600. Should I look for another cable or this one will support 2560x1440 resolution?)

    Beta software is always a risk. Some beta releases are close to finished status and quite polished and bug-free, while others have significant and often crippling bugs. Not that software in official release may not also have problems, but the entire point of beta releases is to identify bugs prior to an official release, so bugs are much more likely. Sometimes you won't encounter any problems, but other beta software may take your machine down completely; it all depends on what the software is intended to do, how skilled the programmers are, and where in the beta cycle the software may be. A "public preview" release from a major developer such as Microsoft, Apple, or Mozilla is less likely to have major problems, but it's no guarantee.
    It's always wise to be very cautious about using any beta software, and to take extra precautions, particularly making backups much more often and preferably not using your main computer, when running any beta software. I would recommend never, repeat never, running beta software on any computer on which you depend on a daily basis for work or critical schoolwork. If you must, make a clone of your entire hard drive to another volume before installing any beta, so you can recover your system in case of major problems.
    Message was edited by: Dave Sawyer

  • 2 questions about bridge cs6 is always the rotate lossless? and high quality on demand

    Hi
    about bridge cs6 the rotate buttons rotate 90° counter and 90°clockwise is lossless ? i mean without loss of quality ?
    and my i know the meaning of high quality on demand? might someone make an example?
    thanks a lot

    That's why I have never bothered to conduct such a test.  A complete waste of time, in my opinion.
    I would not put it that way because it always interesting to what extend users like to go or come up with for testing
    But in basic, yes you are right. If you need such extreme test to proof the theory wrong the practice still is a winner. If you can't see it with your own eyes it is not really important but to fill an academic paper. In real life neither you, nor the customer or viewer would notice any difference
    According to the discussion about jpeg vs Raw, of course Raw has a ton of benefits above jpeg. Personally I almost never shoot jpeg but I do know people that do to satisfaction.
    Suppose you are a sports photographer and need both speed in writing to the card as in post process etc. You are working under know and solid light conditions and have measured your wight balance and set it manual. This provides very good qualities (that is if you have set the jpeg quality to high or max in camera) and shot with a recent good dSLR it produces files that can be published without problems on a magazine spread.
    I can't see disadvantage for such situations. However, you have to be aware that for future use your options are still limited when deciding to change post processing. Color temperature, exposure etc etc are far more flexible with Raw then jpeg.
    The vast majority of my clients want jpeg and that is what I convert to when files are ready. Yet I keep my original DNG and PSD file.
    Especially the archived Raw (in my case since 2008 converted DNG from CR2 files) is important. I can't tell you how surprise I am every time I open a raw file from 10 years ago in todays Raw converters. They have been improved very much and are able to get more out of your old files then you ever could imagine.
    And to finish with an other plus side of Raw. If you need to enlarge old and new raw files to huge billboards you will discover that the results of the Raw are far more superior

  • Question about BART - mode of the manifest

    Good Day,
    I have looked into the manifest of the bart generated as follows, get confused about the mode(which is permissions), why there is a prefix (3 bits normally, for example 100, 120, 106) before the permissions (such as 755, 600, 777), what are those bits meaning? Appreciate for any help!
    /etc D 3584 40755 user::rwx,group::r-x,mask::r-x,other::r-x, 3c6803d7 0 3
    /etc/.login F 524 100644 user::rw-,group::r--,mask::r--,other::r--,
    3c165878 0 3 27b53d5c3e844af3306f1f12b330b318
    /etc/.pwd.lock F 0 100600 user::rw-,group::---,mask::---,other::---,
    3c166121 0 0 d41d8cd98f00b204e9800998ecf8427e
    /etc/.syslog_door L 20 120777 user::rw-,group::r--,mask::rwx,other::r--,
    3c6803d5 0 0 /var/run/syslog_door
    /etc/autopush L 16 120777 user::r-x,group::r-x,mask::r-x,other::r-x,
    3c165863 0 0 ../sbin/autopush
    /etc/cron.d/FIFO P 0 10600 user::rw-,group::---,mask::---,other::---,
    3c6803d5 0 0

    Simon2k7 wrote:
    > But why doesnt DW8 automatically
    > insert the mark of the web all the time.
    Because it works only when testing the file locally. You
    should remove
    it before uploading the file to your remote server as it has
    no effect
    on the way others see your pages.
    David Powers, Adobe Community Expert
    Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
    Author, "PHP Solutions" (friends of ED)
    http://foundationphp.com/

  • AEBS 802.11n question about bridging

    using AEBS 802.11n and connecting to an existing network which is using DHCP...
    internet button chosen
    internet connection panel chosen
    connect using : ethernet
    configure ipv4 : using dhcp
    ethernet wan port : automatic (default)
    connection sharing : share a public ip address
    is the AEBS acting as a bridge here? so, now the AEBS can pass out ip addresses that are different (local) network addresses than what the AEBS is receiving from the established network, which it is joining?? the established network 192.168.1 the AEBS DHCP network 10.0.1
    internet button chosen
    internet connection panel
    connect using : ethernet
    configure ipv4 : using dhcp
    ethernet wan port : automatic (default)
    connection sharing : Off (bridge mode)
    or...
    the AEBS is acting as a bridge here? (off (bridge mode)) can the AEBS pass out ip address using a different network address here? and if it does so there will be no NAT functionality?
    what does it mean to have DHCP functionality and no NAT. does using DHCP and no NAT mean that each computer, on the local network connected to the AEBS, that segment, must have a static address?

    In your first configuration, where connection sharing = share a public IP address, the AEBSn is still acting as a wireless router and, effectively, has created a second wireless subnet.
    In the second configuration, where connection sharing = Off (bridge mode), the AEBSn is "passing thru" the NAT/DHCP services from the router it's connected to so any devices connected to the AEBSn will still be on the same network as the upstream router.

  • Question about bridge pattern

    its definition is "decouple an abstraction from its implementation so that the two can vary independently". I don't understand what "abstraction and the implementation vary independently" really mean and how .
    Before another question pls see the below class diagram of bridge pattern:
    http://images.cnblogs.com/cnblogs_com/zhenyulu/Pic91.gif
    My question is whether not using abstraction and just keeping implementation hierarchy can do the same thing? Interface and its implementation itself(polymorphism) can make extending easily and be well subject to open-closed principle,can't they?
    Sorry for my bad English.
    Edited by: fxbird on 2011-7-17 上午5:13

    fxbird wrote:
    jschell wrote:
    fxbird wrote:
    I think it's very common in j2ee development. Certainly isn't if someone is using a container.
    If someone is creating a container then I would suspect that such a pattern might be useful.
    However if someone is creating a container then there are going to be a lot of useful patterns. And lot of classes as well.
    And in total of the entire scope of creating a container the bridge would be a very small part.
    So it certainly isn't going to be "common".Hello jschell , what do you mean by 'container'? You phrased your comment about J2EE. A common idiom is to refer to a J2EE (actually newer name is JEE) server as a JEE container. Not sure why specifically that word is used but maybe because such servers are said to 'contain' applications.
    In my previous reply, the architecture I mentioned is ss(spring+struts2.x),the pattern I mentioned is a standard way. You either do not understand what I said or you do not understand what happens in those implementations.
    If I have 100,000 classes and 3 of them are implementing the bridge pattern then it is not "common".
    If I have 100,000 classes and 3,000 of them implement many bridge patterns (and not generated) then one could say it is "common".
    And having done some JEE applications I seriously doubt there is an implicit need to use the bridge pattern.
    The bridge pattern is intended to deal with a complex situation. Since there are more simple JEE applications than complex ones then it seems unlikely that there is a "common" need for it in JEE applications.
    Actual I've not been understood why it's used this way---define business interface, from my perspective, it doesn't have to define it, simply writing a business class and calling dao method is enough. I assume bo interface thing is a bridge pattern.I don't know why they would use the bridge pattern nor even if they really do. I wouldn't be surprised that it is used and I can also suppose that the use would be a good idea. Although it is quite possible as well that it is used incorrectly in some places.

  • Questions about Airplane Mode

    I have 3 questions.
    1. When airplane mode is enabled, does the phone still ring for the caller? Does the phone ring at all when I have it?
    2. Can I still accept Text messages? Or can I send out messages?
    3. Can I enable Wifi and go on certain apps that need Wifi? Such as a chat App?
    Thanks.
    Post relates to: Pre Plus p101vzw (Verizon)
    This question was solved.
    View Solution.

    1, 2. Airplane mode disables all radios. You can't make or receive calls or messages.
    3. You can enable WiFi. Any apps that need WiFi should still work.

  • Question about protection mode in Stdby env.

    Hi,
    In a standby environment, can we have primary database working in two protection mode simultaneously.
    e.g. There are 2 standby databases for a primary database. One is situated in another city (Stdby_A) connected via a slow link and another is in the same data center connected via 1Gbps link (Stdby_B).
    Can we have primary database working in Maximum Performance mode for 'Stdby_A; and in maximum protection mode for 'Stdby_B'.
    Thanks
    Amit.

    thanks,
    what could be the best possible solution in above scenario.
    Regards,
    Amit

  • Question about blend modes

    I have a video clip of a guy in front of a white screen (originally it was a green screen but I replaced the background with a white wall). I want to add a graphic behind him and I am not sure which blend mode to use. The graphic is also based on a white background. Would it be easier if I just had an alpha channel? Can you even export a video clip out of FCP with an alpha channel?

    But if you're keying in FCP, why not create the Motion project with the proper aspect ratio, or adjust it once you bring it into FCP?
    You're not gonna get there with blend modes...
    Patrick

  • Question about Standby modes (S1 or S3)

    Hi all,
    Can somebody explain what S1/POS and S3/STR standby modes are? my system is set at S1/POS and when I press standby everything shuts off except for my case fans and power supply fan.
    If i set it to S3 will that turn off everything like I want it?
    Also, what is APIC mode ? should i enable it?
    Thanks

    Well My Bad then , And Thank You For the Heads up Maesus .... The only thing that I was trying to Suggest, is to Stay Away from Choosing the "Stand-By" Mode, that Pops Up When you Initiate a Winows Shut-Down, I say this Because a Number of us Using Higher Performance Memory, along with a Slightly Overclocked FSB, Will Result in the PC Going into an Infinate On-Off Loop, Until you Reset the C-MOSS, I'm Sure those of who this has happened to can Attest that this is one of the Scariest things to Happen to you (As far as the PC is Concerned) As you have NO Control (Even if you hit the Power Button ..On-off-on-off-on-off-on-off-on-off , And this is all it does until you Clear the C-MOS , And I am Sure that this is NOT to Good For either the CPU or the PSU ...............Sean REILLY875

  • Question about C99 mode? ( C )

    I get error when I try to compile the following program:
    #include <stdio.h>
    int main (){
    for (int k = 1;k<10;k++){
    printf("hi");
    return 0;
    it says
    error: 'for' loop initial declaration used outside C99 mode.
    Is there a way to change the default mode to allow this ?
    Thanks
    ( always in C , not C++ )

    Xcode has the build setting C Language Dialect, which is part of the Language collection, that you can set to use the C99 standard. If you're running Xcode 2.1 or later, you can use a configuration settings file that sets the dialect to C99 for all projects that use the settings file. The setting name for the settings file is GCCC_LANGUAGESTANDARD.
      Mac OS X (10.4)  

  • [SOLVED] Question about Bridge Interface in VirtualBox

    Hi,
    So I use bridge interface option in VirtualBox opposed to the default NAT one.
    From what I see, the two interfaces(original one and bridged one) are isolated, such that the guest OS cannot intercept traffic of host OS and vice versa, is that correct?
    Cause I cannot see the interface bridged by VirtualBox in host OS and cannot see the actual interface in guest OS.
    Thank you.
    Last edited by darrenldl (2013-09-12 02:30:39)

    I'm not sure what you mean by isolated, do you mean that the guest machine won't be able to communicate with the host system? I don't think that the case. I'm not an expert on this myself and it's a bit of a blind man describing an elephant, but from what I understand a bridged interface acts as an independent host on your network. As far as any other machine is concerned, the guest and host are 2 machines. Are you able to ping the host os' ip from the guest machine? If you are able to ping across, then they are sharing the same network segment. This means if you want the bridge to not be able to see what's going on on your network, you'll have to use some firewall or subnet tricks to get that to happen.

  • ACE bridged mode

    Hi All,
    I've a quick question about bridged mode in an ACE module.
    Is it possible to have the servers on a separate subnet rather than on a directly connected VLAN? 
    Due to limitations brought on by physical aspects of the setup (and also security policy), I cannot put the ACE right next to the servers. ACE on a stick isn't feasible due to PBR smashing the CPU of the msfc so I'm thinking the ACE needs to be in bridged mode as we have to keep IP address transparency so the servers can perform policy functions based on client IP address.
    I've attached a .jpg illustrating the basic setup.
    The pertinent question i guess is:  Can we use the ACE to loadbalance to servers that are NOT on the bridged VLAN subnet and will also quite possibly be on different subnets themselves?
    Any suggestions are very much appreciated.
    Thanks All!
    Brad

    Hi Brad,
    As long as there is one to one nat on the firewall it should work just fine.
    Even though the servers will be one subnet away but the natted IP will act as local IP for the ACE.
    For config reference look at the following link :
    http://docwiki.cisco.com/wiki/Basic_Load_Balancing_Using_Bridged_Mode_on_the_Cisco_Application_Control_Engine_Configuration_Example
    hope that helps.
    regards,
    Ajay Kumar

  • Does Bridge Mode Work only with Apple Router?

    Can I use an Airport Extreme Router, in Bridge Mode, as a wireless bridge in a network that does not use an Apple Router?
    Situation:  Wifi Hotspot from Smartphone connects to Dlink Wireless Bridge in other room allowing Wifi access to printers having only Hard-Wired Ethernet connections.  Trying to do the same with an Airport Extreme, with same network name and password, in bridge mode, to provide a PC internet access through the Ethernet connection to Airport Extreme.  Cannot seem to get the Airport Extreme in Bridge Mode to function as a wireless bridge on this network.

    Are both of your AirPort Extreme models the "ac" version?
    So Base Station (2) would be set to bridge mode, hard wired to Station (1).  Base Station (2) - I believe in this configuration will broadcast the wireless signal from Station (1), the router, with all DHCP addressing handled by Station (1).
    No, Base Station 2 would not broadcast the wireless signal from Base Station 1. Base Station 2 would broadcast its own wireless signal, which it derives from the Ethernet connection coming from Base Station 1.
    You don't have to worry about "bridge mode" if you use Apple's "wizard" to set things up in AirPort Utility.
    If the wireless on Base 2 is configured to use the same wireless network name and password as Base 1, then Base 2 will act like an "extender", and it will seem as if you have one "big" network. This type of setup is called a Roaming Network.
    Base Station 2 would only broadcast the wireless signal from Base 1....IF....Base 2 was connecting using wireless. But, you changed the question to ask about Base 1 and Base 2 connecting using Ethernet.

  • Adding direct server access to CSM in bridge mode

    I have a CSM that I have set up in bridge mode and want to allow direct management access to the real servers.
    It looks like this. MSFC 10.1.100.1
    CSM 10.1.100.3
    Reals 10.1.100.10
    10.1.100.20
    10.1.100.25
    Virtual 10.1.100.130
    10.1.100.140
    I tried to use the same method that I found for routed mode on CCO.
    Serverfarm SERVER-SUBNET
    No nat server
    Predictor forward
    Vserver DIRECT-ACCESS
    Virtual 10.1.100.0 255.255.255.0 tcp any
    Serverfarm SERVER-SUBNET
    Inservice
    The next step in the documentation says to add a static route to the CSM
    Ip route 10.1.100.0 255.255.255.0 10.1.100.3
    But this does not make since since the MSFC 10.1.100.1 address is already the default gateway.
    So is there another way to configure bridge mode and enable direct management access?

    After I thought about bridge mode again and took out the direct-access and server-subnet commands. I tested again and I can now directly access the servers.

Maybe you are looking for