A question about photoshop and bridge

HI
I have just downloaded Photoshop CC with an annual contract, I opened it and clicked on Bridge. Now Bridge is downloading. Is Bridge included as part of  photoshop under my new contract

Cloud Plans http://www.adobe.com/products/creativecloud/buying-guide-at-a-glance.html

Similar Messages

  • Quick question about Photoshop and Bridge

    If someone purchases the Standard Photoshop software, does Bridge come with it? I think it does, but I am not sure.

     

  • Installing Photoshop and Bridge

    When I try to install Photoshop and Bridge I get a strange question before installing: it is not save. And the installing does not work. What is wrong.

    I have search about your question but i have the same because i want some photoshop facilities in http://www.pakistanjobs.pk/, so what can i do.?

  • Photoshop and Bridge CS5 does not auto rotate SOME images.

    Photoshop and Bridge CS5 does not rotate SOME of my vertical images.  Most other photos taken in the same time frame and with the same camera display perfectly.
    Orientation is checked for display under Preferences, Metadata, Camera Data. 
    There also seems to be a discrepancy how Orientation is described under Metadata for those images which DO auto rotate : sometimes it is -90 (which is how I hold the camera for verticals and which displays on most verticals) and sometimes it is "normal" even when it has auto rotated the image.   I do not understand this difference.
    "Normal" is also used to describe the orientation of those images which DO NOT auto rotate for viewing.
    The photos in questions were taken using a Nikon D-300 which is programmed to indicate the orientation of the camera and has always been programmed to do so. 
    I know I can manually change the orientation but we are talking about hundreds of images (I have over 10,000 photos in all; most of which display fine).
    What should I be looking for to explain and correct this issue?
    I appreciate anything you can do to help.  Thank you.

    Thanks for responding to my query.  I'll check out the thumbnail size.
    It is just so curious that 90% of the verticals auto rotate and the rest do not.  The ones that do not rotate are even from different years (other images in those years work fine), although all taken with the same camera.

  • Had to pick a recover point to a week ago - can't find PhotoShop and Bridge but CC says they are downloaded.

    I have had mega computer issues today - had to recover back to a week ago and in the process lost my PhotoShop and Bridge - According to the website they are downloaded and on my computer...does anyone know how to uninstall if they don't show up, so I can reinstall them? They don't show up anywhere - it has been a very long frustrating day.
    I am using Windows 7 and before I had to recover everything, about my adobe products, was working great.  I just installed the trial versions on the 4th of October.  Thanks for your help!

    I think I finally found the place to uninstall both of them, going to try that and then reinstall.  If that helps I will come in here and delete this post.
    Actually since it took me a couple of hours to figure it out.  One of the reasons it took me so long is that I only found one other discussion question even remotely touched on this subject.  The problem was, the question was asked 2 years ago, and the instructions weren't in the same place.  I ended up going to the Creative Cloud screen, hovered over the right side of the screen and a little gear (settings) showed up and the only option available when I did that was "Uninstall".  I clicked on that and when it was gone, I was again given the option of downloading them again.  At least my day is ending with less stress than it started.

  • Creative Cloud Member Photoshop and Bridge sooo slow

    My Video Card is not supported for photoshop CC and my photoshop and Bridge are sooo slow now.  I also keep getting errors about the 3D options not working because of this.  As a photographer all I am doing is editing photos do I need the 3D options ? Can I disable Them, Can I go back to photoshop 6 with Creative Cloud?

    Yes, with CC you also get PS6.  Although think there will be the same problems as the on line version is 3D also.  Photoshop needs RAM and Bridge needs processor speed to function well.

  • Why do Photoshop and Bridge have so many, almost daily updates?

    Why do Photoshop and Bridge have so many, almost daily updates?  Almost every day when I open my computer up there are updates waiting.  This seems a bit much...

    This forum is about the Cloud as a delivery process... you might ask in the individual program forums
    If you start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
    But... when Adobe went to the Cloud, one of the selling points was that updates AND enhancements would be delivered more often

  • 2 question about GPU and Lens correction ,cs5

    Hi
    i have 2 questions about Gpu and lens correction in Cs5
    1)Filter->lens correction->search online
    i get often and almost every connection time out at the first click on search online , at the second click i get no online profile
    is it normal?
    2) question is about Gpu
    it run faster , but talking about ajustament layer
    like saturation or vibrance for example
    i found with the gpu on , a light slow refresh compared with gpu off
    i have set cache  levels 6 ,history 20
    i guess are the defaul
    well i add a saturation layer and move the saturation slide ,increase o decrease saturation
    with Gpu Off , the changes are immedially , i mean i can see in real time the increase o decrease of saturation
    with Gpu On it takes a few(very few) time more
    again is normal ?
    don't be angry , i'm going to buy cs5 and i'm unsecure ... the price make a big role
    thanks

    For what it's worth, I also see a timeout on the first [ Search Online ] click, after about half a minute delay.  Second click turns up results immediately.  This happens each time Lens Correction is started, even without restarting Photoshop, and in both 32 and 64 bit versions.  Also note that I started with one profile listed by default (though from the wrong camera) for my 40D with 28-135 zoom.
    I alsow noticed that I was seeing progress bar activity in the Lens Correction dialog while I was typing this (even though Lens Correction was NOT the active window) every time I hit the 'L' key.  Strange.
    Windows 7 x64.
    -Noel

  • When trying to update my CC apps, the update fails. I get this error: Update Failed. There was an error installing this update. Please try again later or connect customer support. This is currently happening for InDesign, Photoshop and Bridge. I had this

    When trying to update my CC apps, the update fails. I get this error: Update Failed. There was an error installing this update. Please try again later or connect customer support. This is currently happening for InDesign, Photoshop and Bridge. I had this problem previous and was able to fix by doing a complete wipe of my computer and reinstalling CC. However, I should not have to wipe my computer clean everytime I need to do a CC update. HELP!

    Hi,
    Please download the updates directly from the link below:
    WIN: All Adobe CC 2014 Updates: The Direct Download Links for Windows | ProDesignTools
    MAC: All Adobe CC 2014 Updates: The Direct Download Links for Mac OS | ProDesignTools
    Regards,
    Sheena

  • Adobe Lightroom, Photoshop and Bridge does not recognize the raw files from my Canon Mark III 5D Camera.

    Adobe Lightroom, Photoshop and Bridge does not recognize the raw files from my new Canon Mark III 5D Camera.  How can I get my files open to view and edit?  I am using LR3, Photoshop CS3 and Bridge CS3.  Do I need to upgrade these programs or is there another way to get these programs to recognize my files?
    When I try opening the raw images in Lightroom, the thumbnails say "Preview unavailable for this file"  ... when I click "import" an error message pops up that says "The files are from a camera which is not recognized by the raw format support in Lightroom."
    When I try opening the raw images in Photoshop, an error message pops up saying "could not complete your request because photoshop does not recognize this type of file."
    When I try opening the raw images in Bridge, it just shows an icon with the file name and CR2.
    Please help!!!

    Unless I missed an announcement, today, LR6 isn't available, yet, right?  Only Adobe employees and beta testers would know what LR6 does differently at this point and they're all sworn to secrecy.
    LR5 is available as a standalone version.
    PS-CS6 is available as a serial-number-licensed version.
    PS-CC + LR5 are also available as a Photography Plan subscription for $10/month with a minimum OS versions of OSX 10.7 (and probably 10.8, soon) and Windows 7.
    Bridge is part of PS, not a separate program.
    LR5 standalone and LR+PS-CC plan are both available on this page:  http://www.adobe.com/products/catalog/software.html
    PS-CS6 can be found on this page:  Creative Suite 6 which can be found by searching www.adobe.com for Photoshop CS6 and clicking the Buy link in the on-the-fly search results.
    As with any new Adobe software, it might be wise to run it in trial mode for a few days/weeks to see if it works well with your computer, before purchasing and finding out you might need a new computer, first.

  • I have recently updated the new apps via creative cloud now photoshop and bridge no longer work, they open then say they have encountered a problem and close, I also tried opening the old version of photo shop but getting the same result

    I have recently updated the new apps via creative cloud now photoshop and bridge no longer work, they open then say they have encountered a problem and close, I also tried opening the old version of photo shop but getting the same result

    What OS version? What's the exact error? Exactly when does the error occur? What previous versions? What is on the screen when the error displays? Does Photoshop get fully open?
    Try opening Photoshop holding down Shift key immediately to turn off plug-ins. Lots of good suggestions here: Photoshop: Basic Troubleshooting steps to fix most issues

  • A question about grub and USB

    Hi All
    I have a quick question about grub and USB that I can't quite find the answer to by searching.   Most of the FAQs discuss booting a full linux dristribution from USB. My situation is this.  I am getting a new computer with two drives, the second will be arch and the first will be Vista (for my wife).  I want the computer to boot the same way that my wife's machine boots at work so I don't want to install grub on the MBR.  So, is there a way to have all of the grub config files and kernels installed on the second drive and simply install to grub boot loader to the MBR of a USB stick?  My goal would be to simply plug the USB stick into the new PC and boot arch from the second drive. 
    Thanks
    Kev

    i cant say for hp's
    havent worked on any in a while
    recent machines have been coupleof dell's , vaio & emachine
    which dells do offer it at least the ones i tried , my laptop does(dell)
    all home pc's are built by me which do offer to boot individual drives
    what hp you getting it may tell in specs
    are both discs sata? if so it might not offer this option with 2 drives of same interface
    check your power supply alot of these preconfigured machines put cheap under reated power supplies in there
    & will burn your motherboard i just replaced PS(250 watt) & mobo(845gvsr) in an emachines <cheap stuff<
    i hope you researched the pc before buying ie : mobo, power supply are the biggest concerns
    i find it much more benificial to build my own machine gives me peace at mind. the cost is sometimes more in $ but not always , your biggest expense is time researching hardware
    if you live in usa the best places to start looking are bensbargains.net & pricewatch.com
    i am not affiliated with either & niether sell the hardware they are just advertisers a place to buy
    for costomized machines that i would trust is unitedmicro.com theyll asemble & test before shipping
    i have gotten 2 machines so far from them with NO PROBLEMS with hardware (knock knock)
    you may want to consider this in your next venture for pc

  • I have a Macbook Pro june 2011... I have 8GB ram but I only have 256mb VRAM... I've read some other questions about this and I realized... Why do I not have 560mb of VRAM since I have 8GB of RAM? Is there any way to get more VRAM to play games on steam?

    I have a Macbook Pro june 2011... I have 8GB ram but I only have 256mb VRAM...
    I've read some other questions about this and I realized... Why do I not have 560mb of VRAM since I have 8GB of RAM?
    Is there any way to get more VRAM to play games on steam?
    I've learned  by reading other topics that I can't upgrade my graphics card on my Macbook Pro because it's soldered into the motherboard or somthing like that, but please tell me if there is any way to get more video ram by chaning some setting or upgrading something else. I'd also like to know why I only have 256MB of VRAM when I have 8GB of RAM, since I have 8GB of RAM I thought I was supposed to have 560mb of VRAM...
    So the two questions are...
    Is there any way to upgrade my VRAM, so that I can play games on steam?
    Why do I only have 256MB VRAM when I have 8GB total RAM?
    Other Info:
    I have a quad core i7 Processor.
    My graphcics card is the AMD Radeon HD 6490M.
    I am also trying to play games on my BOOTCAMPed side of my mac, or my Windows 7 Professional side.
    THANK YOU SO MUCH IF YOU CAN REPLY,
    Dylan

    The only two items that a user can change on a MBP are the RAM and HDD (Retinas not included).  You have what the unit came with and the only way you will be able to change that is to purchase a MBP with superior graphics
    If you are very much into gaming, the I suggest A PC.  They are far superior for that type of application to a MBP.
    Ciao.

  • A few questions about MacBooks and Parallels Desktop.

    I have a few questions about MacBooks and Parallels Desktop.
    1) I understand I need at least 1GB of RAM to run Parallels Desktop but what about the hard drive, is the stock 60GB drive big enough?
    2) Related to question 1, even if it was big enough to allow me to install and run Windows would the 60GB drive be enough if I wanted to install a Linux distribution as well?
    3) This has nothing to do with Parallels Desktop but thought I'd ask it here anyway, do Apple Stores carry just the stock MacBooks, or do they carry other configurations?
    Thanks
    Keith

    1. Depend on how intensive you use that HD for saving data on both Mac OS and XP. For standard installation on both OS X and XP, the space of 60 Gb is enough.
    2. Same answer as no 1. You can install all three on that HD space, but the extra spacce available will be less and less for your data. You can save your data on external or back up on cd/dvd and erase it from the HD to keep the free space.
    Remember to leave at least 2 or 3 Gb for virtual memory usage.
    3. Just call them, maybe they don't have it in store stock, but by appointment they might configure one for you before your pick-up date.
    Good Luck

  • One question about Pricing and Conditions puzzle me for a long time!

    One question about Pricing and Conditions puzzle me for a long time.I take one example to explain my question:
    1-First,my sale order use pricing procedure RVAA01.
    2-Next,the pricing procedure RVAA01 have some condition type,such as EK01(Actual Costs),PR00(Price)....,and so on.
    3-Next,the condition type PR00 define the Access Sequences PR00 as it's Access Sequences.
    4-Next,the Access Sequences PR00 have some Condition tables,such as:
         table 118 : "Empties" Prices (Material-Dependent)
         table 5 : Customer/Material
         table 6 : Price List Type/Currency/Material
         table 4 : Material
    5-Next,I need to maintain Condition tables's Records.Such as the table 5(Customer/Material).I guess the sap would supply one screen for me to input the data of table 5.At this screen,the sap would ask me to select one table,such as table 5.When I select the table 5,the sap would go to the screen to let me input the data of table 5.But when I use the T-CODE VK31 or VK32 to maintain Condition tables's Record,I found it's total different from my guess:
    A-First,I can not found one place for me to open the table,such as table 5,to let me input the data?
    B-Second,For example,when I select the VK31->Discounts/Surcharges->By Customer/Material,the sap show the grid view at the right side.At the each line of the grid view,you need to select the Condition Type at the first field.And this make me confused very much.Why the sap need me to select one Condition Type but not the Condition table?To the normal logic,it ought not to select Condition table but not the Condition Type!
    Dear all,I'm a new one in sd.May be this is a very stupid question.But it did puzzle me for a long time.If any one can  explain this question in detail and let me understand the concept,I will appreciate him/her very much.Thank you.

    Hi,
    You said that you are using the T.codes VK31 or VK32.
    These transaction codes are used to enter condition records for standard condition types. As you can see a grid left side having all the standard condition types like price, discounts, taxes, frieghts.
    Pl check using T.code VK11 OR VK12 (change mode)
    Here you can enter the required condition type, in the intial screen. (like PR00, MWST, K004, K005 .....etc)
    After giving the condition type, press enter or click on Combinations icon on top of the screen. Then you can see all the condition tables which you maintained for that condition type. Like as you said table 118, table 5, table 6 and table 4.
    You can select any table and press enter, then you can go into the screen in which you have all the field cataglogues you maintained for that table. For example you selected combination of Customer/Material (table 5) then after you press enter then you can see customer field on top, and material fields.
    You can give all the required values and save the conditon record.
    Hope this is clear.
    REWARD IF HELPFUL.
    Regards,
    praveen

Maybe you are looking for