A tree-view in HTML page with nodes generated with java script in run time is not visible in the UI Automation Tree. Need Help
I have a HTML page with an IFrame. Inside the Iframe there is a table with a tree view
<iframe>
<table>
<tr>
<td>
<treeview id="tv1"></treeview>
</td>
</tr>
</table>
</iframe>
In UIA, i am able to traverse till the tree view but not able to see it.
I have used the TreeWalker.RawViewWalker Field to traverse the node from the desktop Automation.RootElement.
I tried to use AutomationElement.FromPoint method to check whether i am able to get that element. Fortunately i was able to get the automation element.
i tried to get the path to root element from the node element using the TreeWalker.RawViewWalker. I was able to get the parent path to the root element.
But trying the reverse way like navigating from root element to tree node, was not getting the element for me.
Please help me with suggestions or inputs to resolve this issue.
Thanks Bernard,
It works fine with JInitiator but not working with
the JPI. For JPI what settings I need to do ??hi TKARIM and Bernard, i am having similar problem even with the Bernard's recommended setup. could you post the webutiljini.htm (i presume you are using config=test) ?
i am actually using jinitiator 1.3.1.28 with Oracle HTTP Server of OAS 10gR2) calling Forms Server 6i (f60cgi). After setting up according to Bernard's recommended setup steps, the java console showed that it loaded the icon jar file when it could not read the form, but it skipped the loading of the icon jar file once it read and started the form. How do we specify in the form to pick up the icon from the jar file instead from a directory ? Or do we need to specify ? Any ideas ?
Thx and Regards
dkklau
Similar Messages
-
HT4623 my iphone is not connecting to the computer so i need help with this plz
my iphone isnt working now that i connected it to restore it to itunes and i cant even connect it
Try to get your phone into DFU mode if you were planning on restoring anyways.
1. Press and hold the Home button and the Sleep/Wake button at the same time.
2. After exactly 10 seconds release the Sleep/Wake button. Continue holding the home button until you iTunes pops up a message telling you that it has detected an iPhone in recovery mode.
NOTE***: It may take a few attempts to get your iPhone into DFU mode. Generally, I hold down both buttons then release the Home button just before I think the Apple logo would appear. If you are still holding both buttons down and you see the Apple logo you are holding them down for too long! -
I wan`t to make a J2ME programm that allow me to connect to a server, and view an *.html page from it.
I have done the http connection, but when I try to view the html page, it appears as html source code.
My question is: Can`t J2ME view a html page?
I have sun`s J2ME wireless toolkit to compile my code.Does anybody know the answer??
Please, help me. -
How to get the source code of an HTML page in Text file Through java?
How to get the source code of an HTML page in Text file Through java?
I am coding an application.one module of that application is given below:
The first part of the application is to connect our application to the existing HTML form.
This module would make a connection with the HTML page. The HTML page contains the coding for the Form with various elements. The form may be a simple form with one or two fields or a complex one like the form for registering for a new Bank Account or new email account.
The module will first connect through the HTML page and will fetch the HTML code into a Text File so that the code can be further processed.
Could any body provide coding hint for thatYou're welcome. How about awarding them duke stars?
edit: cheers! -
Configuration tab not visible in the costom view created.
HI All,
My requirement is:
To create a view in the standard component : BT301i_lam (Financial service item level).
For this i followed following steps:
1> Added item component through EEWB.
2> Enhanced the component BT301I_LAM to add a custom view which will show the required details created through EEWB.
3> Now problem is , after view creation , the "CONFIGURATION" tab is not visible in the view.
Also , in the runtime repository (where i can add my view to the overview page) i am not able to find the view.
Can anyone please tell me on where i went wrong.Please also provide the correct steps to add a custom view so as to show attributes added through EEWB.
Thanx.
Edited by: abhishek ranjan on Mar 25, 2011 10:48 AMHi,
Try with the below code in .HTM .
<%@page language="abap" %>
<%@extension name="thtmlb" prefix="thtmlb" %>
<%@extension name="chtmlb" prefix="chtmlb" %>
<%@extension name="bsp" prefix="bsp" %>
<chtmlb:configTable actionsMaxInRow = "3"
displayMode = "FALSE"
allRowsEditable = "TRUE"
downloadToExcel = "FALSE"
enableTableGraphics = "TRUE"
id = "table"-------you can give your table id
onRowSelection = "select"
personalizable = "FALSE"
selectedRowIndex = "<%= X->SELECTED_INDEX %>"
selectedRowIndexTable = "<%= X->SELECTION_TAB %>"
selectionMode = "<%= X->SELECTION_MODE %>"
table = "//X/Table"
usage = "ASSIGNMENTBLOCK"
visibleFirstRow = "<%= X->VISIBLE_FIRST_ROW_INDEX %>"
visibleRowCount = "25"
width = "100%"
xml = "<%= controller->configuration_descr->get_config_data( ) %>" />
REPLACE X WITH YOUR CONTEXT NODE.
Regards,
Gangadhar.S
Edited by: gangadhar rao on Mar 25, 2011 1:47 PM -
Goods are not visible on the Web Shop main page (RUMP UP)
Hi colleagues.
Help please anybody :)
There was the problem with the goods in Web Shop.
Goods are not visible on the page Web Shop.
Below you can see actions performed by us and Prerequisites:
1. Repository was unachieved from Standard archive - WEC20_MDMCATALOG_CONS
2. Taxonomy, Hierarchy and Lookup table data were transferred from CRM via MDMGX
3. Manually created root node in Product Catalogs table in MDM
4. Put technical code (ID) of created node to Product Catalog module in WCEM configuration - field Catalog ID.
5. Fill another necessary fields in Product Catalog module in WCEM.
6. Manually add test record in MDM and linked to node in Product Catalog table, elements from Main Taxonomy and other required fields.
7. In preview mode of WCEM configuration not possible see any records from MDM (but product catalog elements showed correctly)
More information about settings in MDM, CRM,WCB and configuration steps can see in attachment files
Best regardn,
AndreyHi Denis
Leading zeroes it's no my case, because the products (materials) replicated from CRM to MDM.
Replication from CRM to MDM via MDMGX and Initial Load R3AC1 is successfull.
But on the WebChannel web shop page this products are not visible.
I have suggested that the problem in authirizations of technical user, which uses RFC Destinations from SAP NW AS Java (Web Channel) to MDM.
According Security Guide for SAP Web Channel 2.0 (paragr. 8.3.2 see please screenshot), user of WEC_MDM_DEFAULT destination must assign the role WEBCHANNEL_CATALOG_DISPLAY_ROLE.
But this role does not exist in the system (SAP MDM, SAP NW).
Please give me advice about this. -
SAP RM: How can I create a Node when the node is not visible for the user
Hi,
Product: SAP records Management for Public Sector
Version: 7.00
is it possible to create a instance node when the model not is not visible for the active user?
I looked in the CL_SRM_XML_REC_MODEL but every methode I used gave me no results with the special user.
Regards and thanks for every beginning
Fanninger ThomasHi,
here an example.
When I use the method CL_SRM_XML_REC_INSTANCE->IF_SRM_XML_POID~GET_ALL( POID_TAB COUNT_USER_REST COUNT_POID_AUTH ).
When I used the user with no right for viewing the invisible nodes I get no elements in the tabelle POID_TAB and 38 in the value COUNT_USER_REST.
So did any one know a solution you can I create a nodes and change the restriction for the new node with the normal user?
Regards
Fanninger Thomas
Edited by: Thomas Fanninger on Feb 5, 2008 8:15 AM -
Application Components not visible in SAP R/3 tree
Dear All,
We have standalone system and we have installed ECC 6.0 with BI Content. Harddisk is 320 GB with 2 GB RAM. We want to extract the data from R/3 to BW which are on the same system (As ECC 6.0 contains builtin BW).
In RSA1 the application components are not visible in the SAP R/3 tree under datasource tab. When I am replicating the entire SAP data source it is giving shortdump(STORAGE_PARAMETERS_WRONG_SET).
How can I replicate a particular data source to avoid the memory problems because I have only 2 GB RAM.You can also Replicate a single datasource w/o replicating the App Comp using a FM.
BW
SE37
RSAOS_METADATA_UPLOAD
Execute
Give Source System n Datasource - Execute
*Give Datasource Name - for I_O... & Source System for Logsys. -
The "J2EE process table" node not visible in the SAP MMC
For Netweaver 7.0 - The "J2EE process table" node not visible in the SAP MMC.
Details for below
SAP Systems Manager
SAP AG
Version: 7100.109.15.8983
Window Xp
Any suggestions would be apperecited.
Thanks
SriniIt's hard to say without seeing the code for TreeTable. But they probably have something like an addNode mothod for the TreeTableNode which will take care of all the updates for you. If you want to do it youself, you will probably have to get the data Model (tree.getModel()???)behind the TreeTable and use one of the fire... methods on it like fireRowChanged(???) or fireTableChanged(???). I would suspect Sun would do it this way.
-
Hallo ,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable device.Then i bought OSX mountainlion on line and wrote it on a DVD and tried with a USB key board to start the DVD.But does not work.Please help me to get this imac work.
Thankyou in advance for your help.
TerrenceHey terremo,
Thanks for the question. From the information you provided, it sounds like the iMac is successfully turning on, however video is not displayed. These symptoms can usually be isolated further by the troubleshooting steps in this article:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Thanks,
Matt M. -
I have a problem with iphone4
I bought a used and unlocked iphone4
old apple id because the first owner dies
please help me how to activate iphone4
I unlocked with icloudfherly nur arief wrote:
I unlocked with icloud
If you had already removed the device from 'Find My iPhone' in iCloud, then you jus tneed to powercycle the device in order to activate it.
Source: http://support.apple.com/kb/TS4515
"After the device is removed from the previous owner’s account, turn the device off by pressing and holding the Sleep/Wake button located on the top-right side of the device. Then restart your device and proceed with device setup as you would normally."
If it has not been removed, then the activation lock is still active.
If the previous owner cannot remove the device from their account there is nothing you can do unless the place you purchased it from will give you a refund.
Activation Lock: http://support.apple.com/kb/ht5818
What if I purchase a device that is still linked to the previous owner's account?
Contact the previous owner as soon as possible and ask them to erase the device and remove it from their account. For complete instructions, read how to remove a device from a previous owner's account.
How do I check for Activation Lock before purchasing a used device?
When purchasing an iPhone, iPad, or iPod touch from someone other than Apple or an authorized Apple reseller, it is up to you to ensure that the device has been erased and is no longer linked to the previous owner’s account.
Follow each of these steps to make sure that you can use the device you purchase:
Turn the device on and slide to unlock.If the passcode lock screen or the home screen appears, the device has not been erased. Ask the seller to completely erase the device by going to Settings > General > Reset > Erase All Content and Settings. Do not take ownership of any used iPhone, iPad, or iPod touch until it has been erased.
Begin the device setup process.After choosing a language, choosing a country, and connecting to a network, the device will begin activation. If you are asked for the previous owner’s Apple ID and password, the device is still linked to their account. Hand the device back to the seller and ask them to enter their password. If the previous owner is not present, they can remove the device from their account by signing in to icloud.com/find. Do not take ownership of any used iPhone, iPad, or iPod touch until it has been removed from the previous owner’s account.
You will know that a device is ready for you to use when you are asked to “Set up your iPhone", “Set up your iPad", or “Set up your iPod” during the device setup process. -
I Have An Iphone 4s And When I Listen To Music With My HeadPhones I Cant Lower The Volmume of The Music Beacuse Then It Will Have No Sound I Can Only Listen To The Music With The Volume Loud I Need Help What Can I Do ?
Hi Yendy14,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
Troubleshooting iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/TS2634
Cheers,
- Judy -
Ok so I used remote wipe data by using find my iphone app in order to fix something. Now I can't use imessage with my number. I see it but it's not checked in the send
Using iphone 5s *******
-
hey !
I have a problem with my iphone 5s IOS 8 , my notification center does not scan when the screen is lockedsounds like a hardware failure. Return the phone to Apple.
-
Can't install Updater and view my HTML page online!
Hi all,
I do have the most recent version of Macromedia Dreamweaver
MX 2004 ver. 7.0.1. But I was trying to install the updater anyway.
As I was trying to install the Updater I received a Severe Error
message which says: "This folder does not contain Dreamweaver MX
2004." This happens when I choose the destination as to where I
should install the files. And I do have Dreamweaver installed on my
machine. Although I probably don't need the updater, I wanted to
install it because I am having problems viewing my html file (which
embeds an swf) when I upload it to the server. I can view it
locally but when I view the page online, it just hangs there
forever.
I sent my html file to someone else and she was able to
upload it to her server and when I viewed her source code, I
noticed that she had some JavaScript. When I asked her about it,
she said that the JS file that's in the html was automatically
added by Dreamweaver to overcome the Microsoft click to activate
limitation. The script writes the Flash embed code to the page
dynamically. That didn't happen for me, so I'm confused as why my
html page which embeds Flash can't be viewed online correctly.
Please help! Thanks!"This folder does not contain Dreamweaver MX 2004."
That only means that it doesn't contain DW7.0 - which you
already know.
Since you have already updated to 7.0.1, this is the expected
error message
when you try to update again.
> it just hangs there forever.
Post a link to the page, please.
> I sent my html file to someone else and she was able to
upload it to her
> server and when I viewed her source code, I noticed that
she had some
> JavaScript. When I asked her about it, she said that the
JS file that's in
> the
> html was automatically added by Dreamweaver to overcome
the Microsoft
> click to
> activate limitation.
Not if you are using 7.0.1 it doesn't. A look at your page
would reveal
all, though.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"respondplease" <[email protected]> wrote in
message
news:[email protected]...
> Hi all,
>
> I do have the most recent version of Macromedia
Dreamweaver MX 2004 ver.
> 7.0.1. But I was trying to install the updater anyway.
As I was trying to
> install the Updater I received a Severe Error message
which says: "This
> folder
> does not contain Dreamweaver MX 2004." This happens when
I choose the
> destination as to where I should install the files. And
I do have
> Dreamweaver
> installed on my machine. Although I probably don't need
the updater, I
> wanted
> to install it because I am having problems viewing my
html file (which
> embeds
> an swf) when I upload it to the server. I can view it
locally but when I
> view
> the page online, it just hangs there forever.
>
> I sent my html file to someone else and she was able to
upload it to her
> server and when I viewed her source code, I noticed that
she had some
> JavaScript. When I asked her about it, she said that the
JS file that's in
> the
> html was automatically added by Dreamweaver to overcome
the Microsoft
> click to
> activate limitation. The script writes the Flash embed
code to the page
> dynamically. That didn't happen for me, so I'm confused
as why my html
> page
> which embeds Flash can't be viewed online correctly.
>
> Please help! Thanks!
>
>
>
Maybe you are looking for
-
I'm having problems with video play back in itunes 10.7.0.21 for windows 7. Video was playing fine, but now I'm having audio issues. Audio cuts in and out. Also video pauses and fast forwards. Does anyone know what would cause this all the sudden
-
HT5569 Trying to set up my iPhone 5, but I'm stuck on the choose a wi- fi network option
.?
-
Disabling Controls in the Full Featured User Interface
Hi Ppl, I do not want few controls (variables view, stack view) to be displayed in my full featured User Interface. What is the best way to do this. Are there configuration parameters(UserInterface.xml) that could make these controls in visible. Or
-
Offline 17:31:09 svc:/application/management/common-agent-container-
Hello! guide me to resolve this error when trying to start SMF service "common agent container" # cacaoadm status default instance is ENABLED at system startup. default instance is not running. # cacaoadm start Error when trying to start SMF service:
-
Hi Has anybody noticed that the image rendering in FIT mode of develop only shows "full detailed" when changing some adjustments? When switching an image in develop module I first get a preview, which does not seem fully detailed. After changing any