I have iTunes version 10.7.0.21 for Windows 7. It was working fine untill recently. Now when I play a T.V. show the audio cuts in and out, the video pauses intermittenly and also intermittenly fast forwards. What is causing this and how do I fix it?
I'm having problems with video play back in itunes 10.7.0.21 for windows 7. Video was playing fine, but now I'm having audio issues. Audio cuts in and out. Also video pauses and fast forwards. Does anyone know what would cause this all the suddenly? More importantly does anyone know how to fix this?
All sorted now. Thread can be closed!
Similar Messages
-
I just purchased the I 4S and at least once a day, it will say Invalid Sim, what would cause this and how do I fix it?
Then, if there's any data on the drive that you want to keep, you have to back up before you do anything else -- assuming it's still possible.
Basically you have three options:
1. Install a copy of the Mac OS on an external hard drive, boot from it, and copy the data from the internal drive.
2. Start the problem Mac in FireWire target mode (command-T at startup) and connect it to a working Mac with a FireWire cable. The internal drive will mount as a FireWire device.
3. Remove the internal drive and mount in an external enclosure on another Mac.
Once you've backed up, follow the sequence in the support article linked below. The article is somewhat outdated. Where it refers to booting from an installation disc, you should boot from your recovery partition (if running Lion) by holding down the key combination command-R at the chime.
Mac OS X: Gray screen appears during startup -
Hi there
I ha
Hi there I have a iPhone 3G and it was with O2 but needed to go onto 3 network so someone on my local market unlocked it and the phone was working fine until I tried to update it through iTunes and it always now stops loading towards the end with an error is there a way to get the phone working again please.Shame you had the iPhone hacked as O2 usually unlock their customers iPhones happily.
We cannot discuss your problem as it is in breach of the Ts&Cs you agreed to on registering
However hint ....you have probably trashed it -
Hi, I currently have iTunes version 10.4 loaded on my windows desktop. I'm trying to download version 10.6 but have been unsuccessful. My system saying that current iTunes.msi file is not valid. What can I do?
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
My iPad was working fine until Tues. Night. I went to go on facebook and it shows a white page like it is coming on the it goes back to the home page. I have turned it off, deleted Facebook and put it back on but it still does the same thing. What can I do?
Morning DeeHutton,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Best of luck,
Mario -
i have hp 1018 laser printer and windows 7 ,all was working fine, suddenly it stop printing all PDFs.i have adobe acrobat X pro installed and adobe X1 reader installed, i searched a lot, nothing i found when i send command to print a PDF it just do nothing , but rest of images or word doc and webpages are beings printed, can any one help me whats going on ?
well i have found that i needed to not just uninstall itunes, but also apple mobile device support, bonjour apple software update and apple application support - uninstall all these and then install itunes - that seesm to have fixed it, though now i am sync fail - that's a different matter perhaps
-
my itunes was working fine until i tried downloading the most current version of itunes, now when i try to get on my itunes library, it wont boot up and has error codes, error 7, and( windows error 126). it also says that MSVCR80.dll is missing from my computer,please re install itunes. but when I try to re install it it will not install on my computer.
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
I have a MacBook Pro. When surfing the web it will eventually slow to a crawl. When this occurs, there will be a small multi-colored wheel spinning until my latest command is handled. What is causing this and is there a way that I can modify or prevent this from happening? Is there a setting that will prevent this?
When you next have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
I have recently got a new replacement iPhone 4. Since I got this I have found that my data allowance is getting used up during the night while my phone is charging on the bedside table. How an I find out what is causing this and stop it happening? Some nights the usage is 150 meg!
You can not access the backup directly.
Did you restore your replacement from this backup?
If so then you already have everything in the backup on your device.
If not, you can wipe the device and restore from this backup:
Settings > General > Reset > Erase All Content & Settings
What is it you are worried about losing that isn't already on your current device? -
gmail on iphone was working fine until yesterday when it prompted me with the message "cannot get mail user name or password for gmail is incorrect", i have tried deleting the account and re-created a new account, same problem, can anyone help?
paulcb, you're a genius, it worked, thank you so much, you don't know how much stress you have taken off my shoulders, I am constantly on my email in my iphone everyday. Thanks a million, take care. Robert.
-
Hi, I have a freecom 1TB hard drive which was working fine until it froze. I pulled it out (mistake I now know) and now it doesn't mount. It shows up in Disk Utility but won't manually mount. When I try to repair it gives message 'failed on exit'. Some people have said to try Disk Warrior, but at $100 it's quite expensive maybe fix. help!
You likely need to reformat the drive which will destroy all data and you need a backup to restore it. If no backup is present then a data retrieval service can be more expensive than DiskWarrior. There is software that can rescue the data but I can not vouch for it's effectiveness as I have always maintained backups. .
http://www.prosofteng.com/
http://www.wondershare.net/ad/data-recovery-mac.html?gclid=CLTp3Mj07rkCFevm7AodL lUAHw
http://diskdoctors.com/software/mac-data-recovery/utility.asp?gclid=CMyf_MH17rkC Fcvm7AodSE0A8A
http://www.cleverfiles.com/ -
Some of the apps previously downloaded have now become blank - white box instead of picture. Name of app still appears. Have tried hard reboot and sync to make sure everything is up to date. Anybody ever had this? How can I fix?
One more thing to try. Double click on the home button. Scroll in that bottom line of icons (swipe finger to left) to the app that are all white. Hold your finger on the app until the - sign appears. Tap it to close the app. Hopefully it will then show up correctly. (As they say about chicken soup curing a cold, "can't hurt")
-
I have an apogee ensemble that I am using with Logic that was working fine 2 days ago but now it is seeing the apogee but giving me a conflict era and I can't get sound through my mixing board. What could be causing it, I haven't changed any settings
OK, but in my ipad, the apple id i have in itues is already the one iwant to have, but th one i used to sin in for i-coud is the other one. Any tip as to how to change the apple id for icloud and any idea how to know what apps i bought with the other apple id so as to delete them from my ipad to avoid being asked to enter another apple id every time they get updated? thanks!
-
I have an iMac and under devices in the sidebar that name has changed from iMac to iMac(1) to iMac(2)...and is now at iMac(9). What is causing this and how do I correct it?
Sometimes this message means that you have two simultaneous connections to the same local network: probably Ethernet and Wi-Fi. If applicable, disconnect the Ethernet cable or turn off Wi-Fi.
Sometimes it happens because a device that gets its network address from the router wakes from sleep, and the address it was using before has been assigned to another device.
A third-party wireless router that has incompatible settings or firmware may be the cause. In that case, refer to the manufacturer or ISP for support. Restarting the router may help, temporarily.
Rename the computer in the Sharing preference pane. -
i keep the itunes encountered a problem and needs to shut down . it was working fine until after i updated to 10.5 can someone plz help
I did get a "server busy" message when I loaded quicktime, but I'm not sure if it is related or not since I've been seeing that over the last couple of days, I can't remember if it came before iTunes stopped working or not. That message reads "This action cannot be completed because the other program is busy. Choose 'switch to' to activate the busy program and correct the problem." My options then are to choose switch to or retry. When I press "switch to" my Start menu opens, and nothing appears to happen when I select retry.
that's an odd sort of a message (or series of messages).
hmmmmm. let's try an experiment aimed at working out if there's a program interfering with the QuickTime (which is in turn causing grief with your iTunes).
try a selective startup using MSCONFIG, with just the itunes and QuickTime background processes enabled, as per the following document:
Using MSCONFIG to troubleshoot conflicts in Windows
does QT open without the strange message after the selective startup?
does iTunes launch properly?
Maybe you are looking for
-
Indesign CC 10.0.0.70 can't undo
Hi, i am using Indesign CC for a while now. While an upgrade of Indesign on mac was needed to open CC files, from pac, in another CC version (thx Obama) i now lost the undo function in Indesign CC 10.0.0.70 for mac OSX 10.9.5). Did anyone run into t
-
Execute java commands through java code
Hi guys, I want to run a java class from another class. I tried like this.. Runtime.getRuntime("java C:\test2");But test2 did not run. But I could execute this command sucessfully. Runtime.getRuntime("javac C\test2.java"); I could see class file gene
-
Variables not updated after repository merge
Hello, I am using OBIEE 11.1.1.7 and i am having issue with RPD patch merge. I have updated the value in the Variable and created a patch out of it. when i am trying to merge or apply this patch other RPD , it is not updating the value in the variabl
-
Select parent row where child table does not contain a value
I have 2 tables Account and Transaction. I want to find all accounts where there is not a transaction of a particular type. eg find all accounts which do not have a transaction with a code of 20. Help please.
-
How do I re-install updates starting with Acrobat 4?
I have the original Acrobat 4 which is based on the Classic platform and which will not open on OSX. So how do I get the updates and upgrades to install on this new MacBook?