A Warning about malformed URI

I got this warning after running some code through HTML Tidy.
Can anyone tell me what it means. The page validates ok but I would
still like to know if this is something I need to fix.
Thanks
Martin

Change this:
<div id="intro"><img id="bestvalue"
src="../siteimages/FlashLocal.png"
To this:
<div id="intro"><img id="bestvalue"
src="../siteimages/FlashLocal.png">
Nancy O.
Alt-Web Design & Publishing
www.alt-web.com

Similar Messages

Re: Warning about taglib in NitroX for Struts 2.0

This is because NitroX 2.0 is smarter about JSP 2.0 and servlet 2.4.
In the web.xml version 2.4 the taglib tags should be nested inside a
<jsp-config> tag. Actually, the next NitroX build will report an error about
this.
M7 Support
"Paul K. Courtney" <[email protected]> wrote in message
news:[email protected]...
I just installed 2.0 on my machine and I'm getting a new warning about mytaglibs that was not present in 1.0 or 1.1.
At the top of my JSP I have
%@ taglib uri="/tags/struts-logic" prefix="logic" %
My web.xml is as follows:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
web-app version="2.4"
servlet
servlet-name>action</servlet-name
servlet-class>org.apache.struts.action.ActionServlet</servlet-class
init-param
param-name>application</param-name
param-value>resources.application</param-value
/init-param
init-param
param-name>config</param-name
param-value>/WEB-INF/struts-config.xml</param-value
/init-param
init-param
param-name>debug</param-name
param-value>2</param-value
/init-param
init-param
param-name>detail</param-name
param-value>2</param-value
/init-param
load-on-startup>2</load-on-startup
/servlet
servlet
servlet-name>log4j-init</servlet-name
servlet-class>app.utility.Log4jInit</servlet-class
init-param
param-name>log4j-init-file</param-name
param-value>WEB-INF/classes/log4j.lcf</param-value
/init-param
load-on-startup>1</load-on-startup
/servlet
servlet-mapping
servlet-name>action</servlet-name
url-pattern>*.do</url-pattern
/servlet-mapping
servlet-mapping
url-pattern>/SurveyGenerator</url-pattern><servlet-name>SurveyGenerator</se
rvlet-name>
/servlet-mappingservlet-mapping
url-pattern>/CatchParam</url-pattern><servlet-name>CatchParam</servlet-name
/servlet-mapping
servlet-mapping
url-pattern>/htmlVers</url-pattern><servlet-name>IQRunSurvey</servlet-name
/servlet-mapping
servlet-mapping
url-pattern>/FinishPage</url-pattern><servlet-name>FinishPage</servlet-name
/servlet-mapping
servlet-mapping
url-pattern>/LastPage</url-pattern><servlet-name>LastPage</servlet-name
/servlet-mapping
welcome-file-list
welcome-file
index.jsp
/welcome-file
/welcome-file-list
taglib
taglib-uri>/tags/struts-bean</taglib-uri
taglib-location>/WEB-INF/struts-bean.tld</taglib-location
/taglib
taglib
taglib-uri>/tags/struts-html</taglib-uri
taglib-location>/WEB-INF/struts-html.tld</taglib-location
/taglib
taglib
taglib-uri>/tags/struts-logic</taglib-uri
taglib-location>/WEB-INF/struts-logic.tld</taglib-location
/taglib
taglib
taglib-uri>/app</taglib-uri
taglib-location>/WEB-INF/app.tld</taglib-location
/taglib
/web-app
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++
>
So, why am I getting the warning?
Paul

Hello
According users manuals document for Portege M100 two optical disc drivers are compatible with your Portege M100L:
TOSHIBA SD-C2612
TEAC DW-224E
So if you want to have good working drive obtain one of them.

Can I stop Windows 7 from warning about security on every linked PDF?

I am working on a project for which I have created one central document (an index) and 120 linked documents. Each document, on every page, has links to the next alphabetical document and back to the central index. This project will be distributed on disc to people with unknown computer platforms.
I am a Mac user, and this works well on my iMac using Adobe Reader. It also works on my ancient Windows XP machine. A tech friend has looked the project over, and he says that on Windows 7 (used by more than half of computer users), every time a document links to a new document, Windows 7 throws up a warning about PDF security hazards. With a large number of documents to open, this could be tiresome.
Is there a way to stop Windows 7 from warning about security on every linked PDF?
This tech person recommends joining all the PDFs into one file (around 50 MB by his estimate), which would require relinking every current link.
Acrobat offers to do the same with its Portfolio, but I'm not fond of the graphic styles offered, and I worry that one large file might be a challenge for older machines.
Any suggestions?

Can you get a screen shot of this error message or at least the exact wording? I suspect the error message is being displayed by Reader/Acrobat and not Windows.

[svn:fx-trunk] 11454: ASyncList class ASDoc change: added explicit warning about the lack of support for re-inserting pending items .

Revision: 11454
Author:   [email protected]
Date:     2009-11-04 18:17:33 -0800 (Wed, 04 Nov 2009)
Log Message:
ASyncList class ASDoc change: added explicit warning about the lack of support for re-inserting pending items.
QE notes:
Doc notes:
Bugs:
Reviewer:
Tests run:
Is noteworthy for integration:
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/collections/AsyncListView.as

Warning about low disk space on drive E

Hi,
I'm running Windows 7 on a HP Pavilion Elite HPE. My main drive i s C and there is also D (Factory image) and then the HP(E: ) one which is giving the warning about low disk space. When I look at what there is in drive E there is a folder called "my name"-PC with a lot of "Backup Set" folders/files in it, and then there is a folder called WindowsImageBackup and subfolder "my name"-PC.
I know I have to clean out these folders but I ma very insecure as to what I can delete.
I'd be very thankful if you could give me some advice in this matter!
This question was solved.
View Solution.

File History in Windows 7 is an extensive image backup of your drive which will steadily increase over time and needs to be cleared and suggest that you turn the feature off. It is not very efficient.
If you wish to delete this Windows Image Backup file, you should disable the automatic backup feature of Windows.
Click on Start button > Control Panel > System and Maintenance> Backup and Restore.
In the left pane, click on "Turn Off Schedule".
From there you can delete the backup files on your E drive.
I also suggest as an alternative, use Macrium Reflect Free every so often as it is more efficient and reliable. It will make a complete image back up of your entire hard drive to an external hard drive. Don't forget to create a rescue disk.
Go to this site and do a Custom Install:
http://www.macrium.com/reflectfree.aspx
I personally use the Professional Edition which gives me more flexibility and features.
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

After updating to iOS 6 my iPod Touch 4th.Gen is virtually unusable ... does anyone know how to sue Apple since they gave no warning about iOS 6 being for iPad optimisation and a killer for iPods ?

After updating to iOS 6 my iPod Touch 4th.Gen is virtually unusable ... does anyone know how to sue Apple since they gave no warning about iOS 6 being for iPad optimisation and a killer for iPods ? Before I throw away my iPod Touch does anyone know if Apple intends to rectify their obnoxious disregard for iPod users by issuing another 'upgrade' which will allow iPods to work without the constant system crashes that iOS 6 has caused ?

Contact a lawyer if you want to sue.
Otherwise try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Java 7u45 gives spurious warning about missing Permissions attribute

The security dialog in 7u45 gives a yellow warning about missing Permissions attribute.   Does anyone know how to get rid of it?
Same as the yellow box in the screenshots (#2 and #3) documented here (although none of them discuss the Permissions attribute) :
What should I do when I see a security prompt from Java?
The MANIFEST.MF file for the app definitely contains this attribute. There's only one jar for the application, and it's signed.
Might this be another security dialog bug? Or am I missing something? The JNLP contains the same "all-permissions" security tag.
I also found the release notes for 7u45 mention a couple of cases where the dialog might still appear
(see last issue: Java™ SE Development Kit 7 Update 45 Release Notes)
I don't use the JNLPDownloadServlet but my own. I didn't model it on the JNLPDownloadServlet, but guess I could have partly the same issue since I use versioning.
My jar doesn't fail to download though, it's just that its displaying this warning.
MANIFEST.MF:
Manifest-Version: 1.0
Implementation-Title: My app
Implementation-Version: 3.0-SNAPSHOT
Built-By: me
Application-Name: Myapp
Created-By: Apache Maven 3.0.5
Ant-Version: Apache Ant 1.8.2
Trusted-Library: true
Implementation-Vendor-Id: org.me
Trusted-Only: true
Build-Jdk: 1.7.0_45
Permissions: all-permissions
Specification-Title: my-client
Specification-Version: 3.0-SNAPSHOT
Archiver-Version: Plexus Archiver
Codebase: *.me.org

I went the Java version detection applet and I don't get a warning about the applet being blocked in the future.
https://java.com/en/download/installed.jsp
https://java.com/en/download/installed.jsp
I dug the jar for the applet out of my Java cache and it contains Manifest.MF with the following contents:
Manifest-Version: 1.0
Codebase: www.java.com java.com
Created-By: 1.7.0_25 (Oracle Corporation)
Permissions: all-permissions
Application-Library-Allowable-Codebase: www.java.com java.com
Application-Name: Java Detection
Name: JNLP-INF/APPLICATION.JNLP
SHA1-Digest: jPquHTBq5R8txQLe5/T20x70Y7w=
Name: JavaDetection.class
SHA1-Digest: kQNVjPC5Yym1DszdpX1D2EH8Ll0=
The jar contains one Java class and a signed JNLP-INF/APPLICATION.JNLP file that looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<jnlp codebase="https://java.com/en/download/" href="JavaDetection_applet.jnlp" spec="1.0+">
    <information>
        <title>Java Detection</title>
        <vendor>Oracle Inc.</vendor>
    </information>
    <resources>
        
<j2se version="1.6+"/>
        <jar href="JavaDetection.jar" />
    </resources>
<security>
<all-permissions />
</security>
    <applet-desc
         name="Java Detection Applet"
         main-class="JavaDetection"
         width="1"
         height="1">
     </applet-desc>
     <update check="background"/>
</jnlp>
They are running applet via JNLP:
<applet code="JavaDetection.class" width="500" height="150"><param name="image" value="/im/download/verify_anim.gif"/><param name="centerimage" value="true"/><param name="boxborder" value="false"/><param name="jnlp_href" value="JavaDetection_applet.jnlp"/></applet>
The JNLP file downloaded from here: https://java.com/en/download/JavaDetection_applet.jnlp matches the signed JNLP file in the jar (except for name).
We are still working on getting our applications to not show the warning message but this appears to be an example of where the "you will be blocked in the future" message is not happening. We don't run our applications as applets so if anyone can find another working example that is a more traditional JNLP app, please post a link.

WARNING: lgrp_minlat_node: malformed MD, no CPUs found in latency group at 0x8db

Hi
Boot device: /pci@400/pci@2/pci@0/pci@e/scsi@0/disk@w5001517bb2817e11,0:a File and args:
SunOS Release 5.11 Version 11.2 64-bit
Copyright (c) 1983, 2014, Oracle and/or its affiliates. All rights reserved.
WARNING: lgrp_minlat_node: malformed MD, no CPUs found in latency group at 0x8db
WARNING: lgrp_minlat_node: malformed MD, no CPUs found in latency group at 0x911
I have this issue on a T4-2 running Ldom 3.1.
I found this document.
Document 1507514.1 Booting Control Domain Reports "malformed MD, No CPUs Found In Latency Group" Errors
I tried the documented workaround (set-var, rm-var, save config)
After poweroff/poweron the messages are still there.
Any ideas?
Thanks,
Marcel

Hi Eze
Yes, we use SR-IOV and I/O domain
# ldm list-io |grep BUS
NAME                                      TYPE   BUS      DOMAIN   STATUS
pci_0                                     BUS    pci_0    primary IOV
pci_1                                     BUS    pci_1    secondaryIOV
The WARNING message is always displayed at control domain boot.
Fw is at 8.5.0.a since Summer:
-bash-4.1$ vdcfadm -c show_log | grep "Firmware Version changed" |grep s0013
12:02:2014 18:55:51 INFO 11183 config:console_check:check_console(86) Firmware Version changed from 8.2.2.c to 8.4.0.b for Node s0013
02:06:2014 09:17:44 INFO   1156 config:console_check:check_console(86) Firmware Version changed from 8.4.0.b to 8.5.0.a for Node s0013
Solaris Upgrade was as follows:
-bash-4.1$ vdcfadm -c show_log | grep "Updated Patch-Level" | grep s0013
23:10:2014 12:20:48 INFO 10181 pkg:pkg_analyze:(200) Updated Patch-Level for 's0013' from '1.19.0.6.0 (U1.SRU19)' to '2.3.0.5.0 (U2.SRU3)'
20:11:2014 07:31:23 INFO 15836 pkg:pkg_analyze:(200) Updated Patch-Level for 's0013' from '2.3.0.5.0 (U2.SRU3)' to '2.3.0.4.1 (U2.SRU3)'
First message I have is from 6.11.2014. Older logs are lost.
# grep lgrp_minlat_node messages.3 | head -1
Nov 6 19:25:04 s0013 unix: [ID 251664 kern.warning] WARNING: lgrp_minlat_node: malformed MD, no CPUs found in latency group at 0x960
I try to change CPUs later.
Best regards,
Marcel

Audio warning about security on computer.....

I am getting frequent loud audio warning about security on my computer. The message plays continuously until I turn it off. it tells me to go to (I think this is it,but I threw the paper away with the exact address) but there is no web address like that. Is it a hoax and can I block it if so? Is it real and do I need to do something? Call from NOTIFICATION® - URGENT ONLINE NOTICE, duration 01:45 is what shows on the log.
Thank you, Tovarishtina

please visit the thread below for instructions and suggestions on how to deal with such unwanted and suspicious activities;
How to Handle Suspicious Calls, Messages and Contact Requests (Scam/Spam)
CONTACT SKYPE CUSTOMER SERVICE | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUPICIOUS CALLS AND MESSAGES | WINDOWS PROBLEMS TROUBLESHOOTING | SKYPE DOWNLOAD LINKS
MORE TIPS, TRICKS AND UPDATES AT
skypefordummies.blogspot.com

About the warning about changes message.

Hi all,
There is a messageChoice on the page,and the messageChoice must fire an action.But if the action is fired,then I click on the other tab or link, warning about changes message will not occur and directly farward to the other page.Is that possible that popup the warning about changes message after the messageChoice's event was fired ?
Thanks,
binghao

Hi,
this question is hard to understand. I don't see a messageChoice component in ADF Faces, can you give more details to your usecase and the components involved
Frank

Warn about Changes

Hi,
I have a few questions on "Warn About Changes" feature in 12i.
1. When the Warn about changes message will be thrown ?
2. In my page, im using the ViewObject (OAViewObjectImpl type) and setting its row attribute programmatically. But still not getting the Warn about Changes message as VO should be dirty in this case. How to overcome this ?
3. In my another page, im using ViewObject (extends OAPlsqlViewObjectImpl class). This triggers the Warn About Changes on setting the Row attributes programmatically. But for some of attributes, i want to suppress the message on page rendering and enable it on user action. is there any way to do it ?
4. Also if i want to throw the same type of message using JavaScript, please help me with the approach of catching the event and throwing the message.
Thanks in Advance !!!
Best Regards,
Senthil.

Hi,
1. When the Warn about changes message will be thrown ?
Answer: warn about changes will be thrown whenever there are changes in the Application State.
2. In my page, im using the ViewObject (OAViewObjectImpl type) and setting its row attribute programmatically. But still not getting the Warn about Changes message as VO should be dirty in this case. How to overcome this ?
Answer: Have you set the warn about changes property to "true" on the pagelayout region???
4. Also if i want to throw the same type of message using JavaScript, please help me with the approach of catching the event and throwing the message.
Answer: you can check if (vo.isdirty()) then you can throw a message.
Thanks,
Gaurav

Save for previous version doesn't warn about incompatibilities

I just back-saved some code from LV2012 to LV2009. The code included some conditional indexing. I expected that either:
The code would be converted to a LV2009 functional equivalent without conditional indexing
I would get a warning about the incompatibility
I was disappointed to find that I got neither....
I thought we previously got warnings about incompatibility... Or is my brain superimposing some wishful thinking onto my memories again?
Chris Virgona
Solved!
Go to Solution.

Just getting back to this thread after a busy week...
The project that I backsaved included 2 VIs with conditional indexing. Neither had particularly complicated logic and the data types were a scalar and a small flat cluster of standard types. The one interesting thing about it was that both myself and a colleague both noticed the problematic backsave on different PCs and with different revisions of the code.
Anyway, I since tried to reproduce the issue but failed... (Doesn't that always happen straight after a forum post?!) Now when I do a backsave (on similar code, lost track of the original code where I noticed this) I get the build array + case structure + shift register...
BUT there is one problem: The new shift register always seems to be uninitialised. That seems buggy to me... (It definitely produces defective code in my case.) Is it that way by design for some reason??
Chris Virgona

How to use warn about changes property with page menus

how to use warn about changes property with page menus

Hi,
If u will enable this property, then u will get warning message as a popup in case of change of state of VO.
Regards,,
Gyan

Warn About Changes at Main Tab Level.

Hi All,
I have 6 main tabs and in one main tab i have created a page with 6 subtabs. In one subtab i have an advanced table which contains custom Add line submit button. i set warn about changes property of AddLine button item to true, and also page layout and fields in advanced table property warn about changes to true. But if i add new line and try to click on other main tab i am not getting alert pop up message (warning message).
Can anyone tell me how to resolve this issue?
Regards,
Babu

Hi Babu
Handeling of warn about changes is covered in the OAF development guide under Save Model("Warn About Changes")

Getconf returns compiler flags that the compiler warns about

I have Workshop 12u1 installed on my Solaris 10u8 machine (x86_64). I'm up to date with patches as of a couple weeks ago.
I'm well aware that the Workshop suite has deprecated flags like -xarch=generic64, -xarch=amd64a, etc.
However, when I run "getconf" on my Solaris 10 system, some of the conf settings still return those older flags that the compiler now warns about. That causes a lot of warning chatter when building certain applications (e.g. perl 5.10.1) that are smart enough to use "getconf" to try determine what flags to use in certain situations. Using getconf to find the right flags is even mentioned in the standards(5) page, but following its advice results in deprecation warnings from the compiler. Not good.
If you run the following code you'll see what I mean:
for f in `man getconf | egrep 'XBS'`; do echo "Checking $f"; getconf "$f"; doneIs this something that I (as a sysadmin for the system) should be able to configure, or is it something that would need to be patched to fix? The man pages for getconf, sysconf, and confstr aren't clear where the values are actually coming from.
So, how should this be fixed?
Thanks,
Tim

Enchanter wrote:
Since I'm running regular old Solaris 10, rather than OpenSolaris, I'm skeptical how much help the OpenSolaris developers are truly going to be. I can certainly give it a go, but even if they fix it in OpenSolaris, it might be a very long time before that fix filters into Solaris.Actually, it goes the other way. New features and modification go into the internal Solaris development workspace before they migrate to Open Solaris. The Solaris Express and final releases and Open Solaris releases come from the same source base. Whether a feature or update goes into a Solaris 10 patch depends partly on demand, especially demand from customers with service contracts.
I'm also a little puzzled about the "backwards compatibility" thinking of the compiler developers. In some areas (e.g. C++ and the standard library), what's shipped with the compiler is years and years behind what's current, apparently in the name of "backward compatibility". Yet where compiler flags are concerned, the developers seem to be much more cavalier about deprecating things and making changes that break backward compatibility.We try very hard not to break code or makefiles. Sun (and now Oracle) makes its money from enterprise users. Their code bases last for a long time, and changes are expensive. Changing a line in a makefile or source code file can mean having to re-certify the application.
The change from -xarch to -m specifying the memory model was more abrupt than we would have liked, and in hindsight, was probably not handled very well. We were running into combinatorial explosion of -xarch sub-options due to the increasing number of architectures that the compiler supports. Some option combinations quietly resulted in behavior that you didn't expect. (For example, the combination "*-fast -xarch=v9*"did not give the same result as "*-xarch=v9 -fast*".) Separating memory model from the other considerations made the options easier and more reliable to use.
Don't get me wrong -- I'm all for forward progress with the tool-chain -- I think that the C++ standard library and the defaults should all be brought up to what's current in the industry. Sun Studio 12 update 1 has direct support for Apache stdcxx (if installed in a standard location) in addition to libCstd and STLport. The Apache library will be in the next Open Solaris. When it will be available in a Solaris 10 update has not yet been decided.
I also think adding support for -m32/-m64 was a good move. It just seems to me that if the developers are going to deprecate a large number of flags that the compiler accepts, they should also make certain that the rest of the operating system can handle that change. To me, that means that they need to work with the developers of getconf/confstr() to make certain it knows how to check the compiler version before it emits a particular flag.Only a few options have been deprecated. It's just that they are probably the ones you used most. :-(
More than one compiler version can be installed on a system, and compilers can be installed anywhere. Programmers in medium to large shops typically run compilers installed on a remote server, although they might have other compilers installed locally. If getconf had to guess what compiler you were using, it would often guess wrong. If you have suggestions on how to match up getconf behavior with the compiler you want to use, please post them in an Open Solaris forum.

A Warning about malformed URI

Similar Messages

Maybe you are looking for