A week over my activation date and no briabdna

Hi guys.
I have been waiting well over a week now for broadband to be connected. We were told it was going to be the 12th December. It has taken us well over a month to get a phone line setup properly but now we have this long drawn out issue with getting broadband activated!! Any help would be appreciated as I don't appear to be getting anywhere. Thanks

Apologies for my predictive text error in the subject heading!!!

Similar Messages

  • Stuck on "activating date and time"...no Apple Support Community "tips" work. Help me.

    I have tried all the "tips" on this forum to no avail. I am stuck with my Apple TV on "activating date and time" without end. I have Restarted it, Restored it, hooked it directly to my known-to-be-working moden with an ethercable, I have pressed (on the remote) the Menu and 'back' buttons simultaneously, I have pressed the Menu and 'down' buttons simultaneously, all for 6+ seconds. There are no "broken" chains or "complete" chains in view. Does anyone 'out there' have any productive, step-by-step intsructions???

    Being unable to set date and time is a problem most likely caused by being unable to connect to the time server over the internet, it is unlikely to be an issue with the Apple TV. You should probably be looking at your router settings etc, have you tried restarting the router.

  • Why is it ok for a verizon wireless service representative to lie to a customer? I went over my monthly data and i called to ask for some help with the overage because i was barely over. They told me they would take care of it and sold me on a shared data

    why is it ok for a verizon wireless service representative to lie to a customer? I went over my monthly data and i called to ask for some help with the overage because i was barely over. They told me they would take care of it and sold me on a shared data plan that would result in 2gb less data but told me i would save 20$ a month. I agreed and recieved my next statement and to my suprise my bill actually went up 15$ a month and i talked to several people and they all told me there is nothing that can be done to get back on the plan i was on and they can not even give me a discount to get me back to what i was paying. They can only offer me a convenience credit. I will be cancelling service.

    ajwest101,
    We do not want to see you go. I truly apologize for any misinformation regarding your plan. Let's investigate into this a little further. What plan were you on? What plan were you switched to? If you look at the detailed billing online of your previous bill do you see any additional charges other then the plan?
    LindseyT_VZW
    Follow us on Twitter @VZWSupport

  • Problem in uploading data from psa to active data and change log dso.

    hi experts
    my data from psa is coming to new data dso but not to active data and change log dso. can you please help me out...

    Uday,
    Please select the request from Manage screen of DSO and click on Activate, pop-up comes again select the request and click on Start. ( If it is Standard DSO ).
    In case of Write optimized DSO you need not to activate it.
    Regards,
    Ramkumar.

  • 2 weeks after activation date and still waiting fo...

    Hi,
    My activation date was supposed to be the 20th of January and what a surprise I am still waiting for the magic broadband light to come on. Calling the 0800 800 151 gets you know where. I have phoned 5 times only to be told that it will be activated tomorrow. Last night I called and the lady I spoke to was going to perform a line check and assured she would call me back.  Of course she didn't so I called again. Don't worry was the answer, it will be working in the morning, all you need to do is reset the hub. Guess what? It's still not working. Not only that BT have now sent me a bill! For what? 5 wasted phone calls and a service that I haven't even got.
    If anyone knows how this problem can be resolved please help. Otherwise I will be cancelling my contract. I will certainly be cancelling my direct debit.
    Solved!
    Go to Solution.

    It looks like the order did close so this is being treated as a fault - there's a fault already logged there but I'll do a few more checks and reply to your email shortly.
    As others have said you're entitled to a rebate for the period of time your broadband's been down so we can take care of it once the broadband's up and running.
    Thanks,
    Stephanie
    Stephanie
    BTCare Community Manager
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Activation Date and Engineer Visit Day for a packa...

    Hi guys!
    I am planning to subscribe a package of a phone plan together with internet. I will need have a COMPLETELY new line to be installed because my house is newly built.
    Is the activation date the same as the day that the engineer comes to get the phone line installed? If not, for most cases how many days are there between these two dates?
    Alan

    Unless anything goes wrong, they happen on the same day.  However, there's no guarantee that it will all work first time.

  • Confused over Activation Date and Engineer Visit D...

    Placed an order for the full lot, phone, internet, TV. This is for a new development, with "BT lines pre-installed" (but not activated).
    I will recieve the equipment tommorow and the (estimated) activated is also tommorow, however I have just come to realised the scheduled engineer visit is not tommorow but the day after (Monday), this was moved/changed without notifying me.
    I gave BT a call, the kind gentleman on the phone suggested to me because it is a new development, chances of work needing to be carried out inside or anywhere within my property is extremely slim, maybe just to test. I agree here as it seems my neighbours all have working phone lines very quick with minimal hassle.
    For fun, I decided to give my own phone number a ring. It connects fine, but because there's no dial tone my phone didn't ring on the line; I assume the activation hasn't been carried out yet.
    So my query here is the activation carried out elsewhere or by another team, while the engineer just comes and checks if everything is ok? Best case scenario is that I recieve my equipment tommorow, mainly the phone/router and my phone and internet works when I whack it in, I could care less for the TV right now.
    Just to reiterate this is a new development/block of flats and the developers have done everything to make it as easy as possible, as initially they said "just give BT a call and they will activate it for you". I haven't questioned my neighbours yet on how they got their's so fast yet as due to my awkward working hours I can't easily get hold of them without disturbance.

    Hi there,
    The activation is usually done automatically (may take upto midnight on the day of activation) and then the engineer who will run tests on the line to check that it is stable will make sure it is in running order.
    Hope this helps.

  • Activation date

    can any one help im 2 1/2 weeks after my activation date ! still red broadband light on hub i made 2 phone calls which got me no where and a email which i got a call back saying 24 hrs that was a week ago just starting to worry that i gonna be billed from bt and from my old ISP and my 30 day mig code gonna be up soon is this normal for a british company as large as bt i have my buissines broadband with bt never had any trouble.
    if any one can please let me know

    still not been ativated i placed my order on 28th may if there is a problem why does my broadband from my old isp still work i cant belive it takes this long. keep seeing bt adverts on tv sending me crazy bt mods were in touch a week ago still nothing why does no one contact from bt any way i have to contact them again and again if i ran my business like this it would be shut .is there any way of getting out of this contract if i cancel ?gonna cancel my btbusiness broadband to i had many years but this is too poor customer service.

  • "#" in the ODS active data view

    Hi all,
    I have a question. I load data (text strings) into ODS object. Then I look into new or active data and I can see symbols "#" on the places in strings, where occurs any special character (for example from any language). I do not know wheteher it is stored in SAP (database) in this bad format or wheteher it is only represented in this bad format due to my different encoding ?? Normally special characters are represented in GUI well. Thanks
    JJ

    Hi JJ,
    as you can see them in the middle of the texts, it just the way BW displays these characters.
    Siggi

  • Month to Date and Year to date calculation

    Hello Experts,
    It would be great If you could provide the formula to implement in BO universe or in the Reporting level for the below requirement.
    MTD, LastMonth, Year to Date, Last to LastMonth and examples are below.
    Last Week:
    Eg: Monday through Sunday
    Description: Based on Todayu2019s date, select the Monday of the previous week for the start date and Sunday will be the end date.
    Example:
    If Today is May 22, 2009
    The result would be, Monday = May 11, 2009, Sunday = May 17, 2009
    MTD:
    If Today is May 22, 2009
    I need a result MTD = May 1, 2009 u2013 May 21, 2009
    LastMonth:
    If Today is May 22, 2009
    I need a result LastMaont = April 1, 2009 u2013 April 30, 2009
    Last to LastMonth:
    If Today is May 22, 2009
    I need a result LastMaont = March 1, 2009 u2013 March 31, 2009
    Thank you.

    Nisniki,
    Here are the methods using WebI:
    MTD: 
    Create a local variable "MTD Start"
    =RelativeDate(LastDayOfMonth(RelativeDate(CurrentDate();-30));1)
    Create a local variable "MTD End"
    =currentdate()
    LastMonth
    =LastDayOfMonth(RelativeDate(CurrentDate();-30))
    Year to Date
    create a local variable "YTD Begin"
    =ToDate("01/01/"+FormatNumber(Year(CurrentDate());"####");"mm/dd/yyyy")
    (reuse "MTD End" or build a "YTD End" variable same as "MTD End")
    Last to LastMonth
    (similiar to MTD, but using "60" versus "30" to move back two months versus moving back 1 month.
    To perform this stuff in the universe requires an understanding of the SQL syntax for the paricular vendor your are working with.  ANSI SQL agrees to represent and compute dates uniformly, however, the functions to make it happen varies by the vendor.
    Thanks,
    John

  • Activation date has passed, broadband is not activ...

    Hi,
    My activation date was yesterday. It has now passed and, somewhat unsurprisingly, my broadband has not been activated. On the BT ordertracking page, regarding the broadband it informs me "your broadband order is in hand with a member of our team....". Regarding the phone line it says "We are currently investigating your line order with our supplier....".
    Has anyone had this problem before? What causes this problem? How long should it normally take from now to get connected? It says to call customer services if it is past activation date and BT don't get in touch (which they haven't so far), but I'd prefer not to have to spend an hour of my evening on hold.
    Thanks,
    Chris

    Hi malfunct,
    Welcome to the community and thanks for posting!
    I'm sorry for the delay getting service connected.  Is everything up and running now?  If not, click on my username and under the section "about me" you'll see the link to get in touch with us.  We can help sort things out from here.
    All the best,
    Robbie
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Bank account dates and reporting

    Hi,
    Is there any feature in SAP, that allows creation of a house bank account with an activation date, de-activation date and deactivation feature?
    Thanks!

    Hello Andrew,
    I am not only looking from FI12 screen but from a possibility of InHouse Cash and Bank Communication module.
    That's said, the business requirement is to monitor and track the bank accounts. This will give them a good hold of old accounts, new accounts, closed accounts.
    And as per business, when a bank account is closed the account is marked as de-activated. When a forward contract is still existing against the bank account, they would need to activate the account.
    Thanks,
    Sivaram

  • How long does it take to delete an account from a macbook? I used secure delete (at the recommendation of the apple genius) and it has already taken 2 weeks... and still not deleted! Granted there was over 200GB of data... any ideas on this? thanks

    how long does it take to delete an account from a macbook (OSX 10.9.4)?  I used secure delete (at the recommendation of the apple genius) and it has already taken 2 weeks... and still not deleted! Granted there was over 200GB of data... any ideas on this? thanks

    how long does it take to delete an account from a macbook (OSX 10.9.4)?  I used secure delete (at the recommendation of the apple genius) and it has already taken 2 weeks... and still not deleted! Granted there was over 200GB of data... any ideas on this? thanks

  • Activation date just came, and went..

    Hi all,
    It's kind of ironic that I decided to come back to BT because I had had enough of Sky. Being increasingly disgruntled with the service that Sky was providing over the last year (I had both line rental and Broadband with them), I literally couldn't wait to leave and come back to BT. So, I signed up with BT on Jan 1st (Through Return to Donor). I wanted to take my phone number with me. I then phoned up Sky a couple of days later and cancelled. At this point, Sky put the cancellation date for January 13th, but my BT activation date was 17th Jan (I think her name was Emily at BT who told me that, and who advised me to get Sky not to cancel on that date, otherwise I would have to pay a connection charge).
    I phoned Sky and got them to change the date (After a lot of pushing). BT changed the date to 21st January for activation and so the cancellation date with Sky was also January 21st. So here I am, expecting my Sky Line Rental and Broadband to stop today, and BT to provide the phone service (With me signing up for Broadband once I get paid at the end of the month). I phoned up multiple times prior to today to make sure that there were absolutely no problems. The guy I talked to yesterday said: "There are no problems, sir. Everything is going smoothly with the transfer." I was awake at 8am today, and around 9am, the broadband and phone stop working. Sitting there, I'm expecting the phone to start working sometime soon. 10am comes and goes. 1pm comes and goes. 5pm comes and goes. You get the picture. It's now 9.19pm and no service. But that's not what's irritating me. What's starting to annoy me is that BT have disconnected me on the agreed date as they told me to make in relation to Sky, but haven't reconnected me. And judging by other peoples' stories, that means I'll have to pay a connection charge when I'm not at fault and I did everything that I was asked to do. Also, I dread to think what will happen in relation to the phone number that I've had for a long time.
    The phone number to call is 0800 800 150 if you're not connected by 8pm. Since that's long gone, I'll be phoning in the morning. What would you guys advise doing? Get out now? My father had the same problem - He phoned regularly to make sure there were no problems until the day itself, and still got blessed with no working phone line. It took him over 2 months to sort it out, and I'm at University so can't afford to take so long, nor do I have the money to correct problems where I'm not at fault. I'm actually thinking of cancelling the order - Is that possible? Even though I placed the order on Jan 1st, and activation was supposed to be today (21st Jan), no service is being provided.
    Any advice would be greatly appreciated. Thanks in advance.

    Hi QuantumSanctum,
    Thanks for the post and welcome to the forum.  I am sorry for the delay in activating your BT phone service.  I can help you.
    Please drop me an email to the email address in my profile. (click on my name and you will find the address under the "about me" section). Include any order details that BT have provided and the link to this thread. 
    Cheers
    Sean
    BTCare Community Manager
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • I have an iPhone 4S that is a replacement of a defective 4s and it shows over 3Gb of data backed up in the cloud from my old 4s. How can I find out what is in this backup? It is preventing me from backing up my new 4s to the cloud due to the amt of data.

    I have an iPhone 4S that is a replacement of a defective 4s. When I activated the newer phone, I believe I transferred over everything except pictures (had multiple failures trying to backup and restore). Now the phone shows over 3Gb of data backed up in the cloud from my old 4s. How can I find out what is in this backup? It is preventing me from backing up my new 4s to the cloud due to the amt of data. It may be duplicated info that I don't need or I may want to archive the backup or parts of it like pictures.

    You can not access the backup directly.
    Did you restore your replacement from this backup?
    If so then you already have everything in the backup on your device.
    If not, you can wipe the device and restore from this backup:
    Settings > General > Reset > Erase All Content & Settings
    What is it you are worried about losing that isn't already on your current device?

Maybe you are looking for

  • Mapping during scan productions

    In a previous post, I've read this : "Also you can map the subfolder-names to metadata fields. For more detailed infos see the admin manual". I didn't find anything like this in the administration guide. Effectively, they discuss on mapping folder na

  • Connecting third party motor to p7000 tools

    Hi, I have a vexta PK245-011AA stepper motor and I'm trying to control it with a P70350 drive via P7000 tools software. When I enter the specification of the motor in the "Stepper Motor/Motor File Editor" menu and select my motor configuration (see a

  • Dynamically increase R3load processes during import phase

    I am currently importing a system export and sapinst didn't give me the option to choose the allocation of R3load jobs to do the import with. Currently, there are only 3 R3load processes running at this time. I have 8CPU on this system and it's not e

  • ECATT not stable

    Hello, I created ECATT script for transaction ME51N - Create purchase requisition using SAPGUI REC interface. In transaction ME51N I jumped to necesary fields using mouse positioning. The script was sucessfully saved. When executing the script it som

  • Why do i have to restart my mac while i am on airplay, if i want to hear the sound on my TV?

    This problem came after the 10.9.2 update... Hope anyone have a solution