ABAP code to set Infopackage Monitor to "RED" status?

Hello,
I have an Infopackage that is using ABAP code to determine the selection values dynamically for an Infoobject during the load (Type: 6 ABAP routine). We have built in customer error checking on the selection values based on our requirements.
In the event of an error I need to do the following:
    -Set the 'Total' and 'Technical' color status to "RED" in monitor.
    -Define custom error message in "Status" tab of monitor for load.
Does anyone know how to accomplish this? Links to an example or previous thread will be appreciated.
Thank you,
Brian
Message was edited by:
        Brian

The status of a particular request is stored in the table RSREQDONE. You can have an abap code to modify the entries of the field TSTATUS (technical status of the request) in this table for the given request number.
Example:
Value of @5B@ for this field denotes that this request is successful (GREEN)
FYI, I am not sure how recommendable this process is coz I never implemented before.

Similar Messages

How to Stop at Source System's Abap Code from BI Infopackage Trigger

Hi Experts,
I have enahanced 2 fields to some standard data source, that fields data is comiong fine to RSA3 in Source system.
i am not getting 2 fields data to BI PSA, but that 2 fields data i am getting at in RSA3 Tcode source system.
i have tried all the ways to get data to BI PSA, but no luck.
so, while running infopacke from BI i need to stop at Source System's Abap code where i have wriiten the code for those 2 fields.
so, please any one can explain, how to stop at source system's Abap Code once i trigger infopackage from BI.
Regards,
Nagaraju K.

Hi,
which data source on your working?
master data or transaction data
enter the TCODE- CMOD
choose the project
select the funciton exit - EXIT_SAPLRSAP_001 - Transaction data
                                    EXIT_SAPLRSAP_002 - master data attr
                                    EXIT_SAPLRSAP_003 - mster data text
                                    EXIT_SAPLRSAP_004 - master data hier.
choose the include program - ZXRSAU01.
go to source code tab -> go to change mode -> find the code will start form here
EX- : when " ZLIS_13_VDITM
if not required don't put break-point .
just comment it code.
Thanks,
Phani.

Infopackage monitor shows red in details tab but green every where else

I deleted all the contents of my cube. Then I did an init load from ODS to Cube. The load shows as completed successfully (green) in both the cube (manage) and monitor header and status. But the monitor details screen shows a red in overall status. The error message it shows there is
Databasis (requests): errors occured
Has any one experienced this? I can see the records in the cube for that request, so the data is there.
There is another DSO loading this cube. The first ODS is 3.5 and the 2nd is 7.0 and uses a DTP. Do you think this has any thing to do with it?

Hello Uday,
it happenes because when the data loads happens it will check for all the request which was present in the source and you will see the list of all the request in databasis request.
I would suggest go to the request which is showing red in the list of data basis request and check that request in RSRQ or in the source and see why it has failed...if its not required to correct then you can turn the overall status to green of the loaded request and use it for reporting and it will not be an issue.
Thanks
Ajeet

Debug ABAP code in InfoPackage

Hi friends,
How i can debug a ABAP code from a variable selection in Infopackage?
Thanks,
EA

I guess you would have figured it out - but for the use of people who might chance upon this post while searching ...
to debug the ABAP code in an Infopackage - you need to run it in dialog mode ( Start Data Load Immediately ) and not in background. This is because background processes cannot be debugged.

Date range selection in abap code in infopackage

Hi!
I have a field called "OPEN_DATE".
When the infopackage is runned, I need the abap code to fint the current date, and from that, make a date range from the first day of current month to the last day of current month
Ex:
Current date = 12.12.2008
Abap code should extract 01.12.2008 - 31.12.2008
Thanks!

Hi helge,
Data: l_idx like sy-tabix.
Data: date_low like sy-datum,
         date_high like sy-datum.
Date_low = sy-datum.
date_low+6(2) = '01'.
CALL FUNCTION 'SLS_MISC_GET_LAST_DAY_OF_MONTH'
EXPORTING
    DAY_IN                  = Date_low
IMPORTING
   LAST_DAY_OF_MONTH       = date_high
read table l_t_range with key
fieldname = 'OPEN_DATE'.
l_idx = sy-tabix.
Pass Range values to L_T_Range Table.
Move date_low to L_T_Range -Low.
Move date_high to L_T_Range -High.
L_T_Range -Sign = u2018Iu2019. *****(Here: I u2013 Include, E u2013 Exclude)
L_T_Range -Option = u2018BTu2019.****( Here: BT u2013 Between )
modify l_t_range index l_idx.
p_subrc = 0.
Regards,

How to bypass printer setting using abap code?

Dear All,
I want to bypass printer setting using abap code?
I am printing sticker using a code and i dont want to display printer setting .
I want direct ouput ?
Regards
Steve

Are you using reports or scripts/smart forms? You can use the parameter for no_dialog = space(use the relevant parameter).

ABAP Code Date Selection for InfoPackage Scheduler

Hello Group
I need to automate the selection of valid condition records for an extraction that have a From and To date range.
I noticed there is an option (Routine for time interval) to write ABAP code along with a template that is available in the InfoPackage.
I think the logic for the selection would be any record
Valid from <= today
Valid to >= today
Can anyone help with the ABAP code?
The template is as follows:
program conversion_routine.
Type pools used by conversion program
type-pools: rsarc, rsarr, rssm.
tables: rsldpsel.
Global code used by conversion rules
$$ begin of global - insert your declaration only below this line -
TABLES: ...
DATA: ...
$$ end of global - insert your declaration only before this line -
form compute_time_dependent_dates
changing p_datefrom type d
 p_dateto type d
 p_subrc like sy-subrc.
 Insert source code to current selection field
$$ begin of routine - insert your code only below this line -
 p_datefrom =
 p_dateto =
 p_subrc = 0.
$$ end of routine - insert your code only before this line -
endform.
Thank You for your help!!
Frank

I resolved the problem . I have changed the order of read table l_t_range because I need the header .
In the loop at datos I add the line l_t_range-iobjnm = 'ZXGE_UNO'.
The problem wasn't the call RFC it was that I built l_t_range bad. I need the infoObject name.
This is correct!!
READ TABLE L_T_RANGE WITH KEY
 FIELDNAME = '/BIC/ZXGE_UNO'.
LOOP AT DATOS.
 L_T_RANGE-FIELDNAME = '/BIC/ZXGE_UNO'.
 L_T_RANGE-IOBJNM = 'ZXGE_UNO'.
 L_T_RANGE-SIGN = 'I'.
 L_T_RANGE-OPTION = 'EQ'.
 CONCATENATE '00' DATOS-WA+3(4) INTO L_T_RANGE-LOW.
 APPEND L_T_RANGE.
 ENDLOOP.
*READ TABLE L_T_RANGE WITH KEY+
+*FIELDNAME = '/BIC/ZXGE_UNO'.+
+* L_IDX = SY-TABIX.+
+* MODIFY L_T_RANGE INDEX L_IDX
Thanks a lot
Ana

Setting value in a cookie using ABAP code

Hai All,
Using ABAP code is it possible to set some value in a cookie.
Regards,
H.K.Hayath Basha.

Hai Durairaj,
Can you explain how to do that.
Regards,
H.K.Hayath Basha.

Setting value in cookie using ABAP code

Hai All,
Is it possible to set value in a cookie using ABAP code.
Regards,
H.K.Hayath Basha.

Hai Thomas Jung,
In Enterprise portal SAP has standard functionality to set inactivity timeout. We can set whatever time we want, say for example if we set the time as 15 minutes. If the user is not interacting with the system for 15 minutes then portal will logout the user automatically without any information.
Our user wants a popup to be shown that the system will be logged out due to inactivity.
Since Portal logout the user automatically without any information. I want to put in my own framework to handle inactivity timeout.
What idea I have is, when ever user interacts with any function in portal. I will set current time in a cookie. Someother application will read this cookie at regular interval, if the time difference between the cookie and system is 15, then I will force the user to logout by showing a popup screen.
In our portal we have three different type of application, they are, Java Webdynpro, ABAP-Webdynpro and BSP.
I think that from Java Webdynpro and BSP we can call a javascript to set value in a cookie, from ABAP-Webdynpro I don't know how to set a value in cookie.
This is my business requirement. Is there anyother solution to fullfill this business requirement.
Thanks & Regards,
H.K.Hayath Basha.
Let me tell the business requirement. Our user want to give a popup message when

Can we set password to our abap code

can we set password to our abap code. so that no one can edit it.

Hi,
REPORT YEDULOCK.
* This program switches the editor lock flag of a given ABAP program.
* It can be useful when the owner of the ABAP is on holiday ...
TABLES: TRDIR.
PARAMETERS: PRG_NAME LIKE TRDIR-NAME.
SELECT SINGLE * FROM TRDIR WHERE NAME = PRG_NAME.
IF SY-SUBRC = 0.
IF TRDIR-EDTX = ' '.
    TRDIR-EDTX = 'X'.
ELSE.
    TRDIR-EDTX = ' '.
ENDIF.
MODIFY TRDIR.
IF SY-SUBRC = 0.
    WRITE: / 'Successful switch.'.
    COMMIT WORK.
ELSE.
    WRITE: / 'Failed switch.'.
ENDIF.
ELSE.
WRITE: / PRG_NAME, ' does not exist.'.
ENDIF.
Regards
Sudheer

OPSI setting remain as ABAP code after client deletion

Hi all,
I'm just wondering if anyone face this problem before:
1. I've created some test data in OPSI (validations of project system) in a test client (eg: 201)
2. I perform client deletion on 201 and client copy from PRD to 201
3. If I check the include statement, the test data still exist as ABAP code (and will generate an abap runtime error). However, if I go to OPSI, the test data no longer not exist.
4. If I re-create the test data in OPSI, then this problem is solved.
Regards.

THere is nothign to worry about it. It is std.behaviour. Wheneven you trasport or Copy client with refrence to Validation. Even though validation is in place in congiuration but system not read that validation and behave as per last config of validation.
You need to correct the same manually by Validation menu--> Simulate function, This will internally generate ABAP code according to your currnet validation. After that your system will behave correctly according to currnet config of validation.
With regards
Nitin p.

Sample ABAP code for userexits, and calling bapi's

Hi,
Can someone please send me sample ABAP code
1) to do extractor enhancement using user exit.
2) ABAP program to call BAPI to read live cache order series data in SNP and write to Idocs through some ports.
3) ABAP routine to generate file name (based on date/country)in the infopackage to upload flatfiles.
Thank you very much in advance and appreciate any help.
Regards
Prasad

hai ,
check this code...
*& Tables
tables : tstc,     "SAP Transaction Codes
         tadir,    "Directory of Repository Objects
         modsapt, "SAP Enhancements - Short Texts
         modact,   "Modifications
         trdir,    "System table TRDIR
         tfdir,    "Function Module
         enlfdir, "Additional Attributes for Function Modules
         tstct.    "Transaction Code Texts
*& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
*& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode obligatory.
selection-screen skip.
selection-screen end of block a01.
*& Start of main program
start-of-selection.
Validate Transaction Code
select single * from tstc
    where tcode eq p_tcode.
Find Repository Objects for transaction code
if sy-subrc eq 0.
    select single * from tadir
       where pgmid    = 'R3TR'
         and object   = 'PROG'
         and obj_name = tstc-pgmna.
    move : tadir-devclass to v_devclass.
    if sy-subrc ne 0.
      select single * from trdir
         where name = tstc-pgmna.
      if trdir-subc eq 'F'.
        select single * from tfdir
          where pname = tstc-pgmna.
        select single * from enlfdir
          where funcname = tfdir-funcname.
        select single * from tadir
          where pgmid    = 'R3TR'
            and object   = 'FUGR'
            and obj_name = enlfdir-area.
        move : tadir-devclass to v_devclass.
      endif.
    endif.
Find SAP Modifactions
    select * from tadir
      into table jtab
      where pgmid    = 'R3TR'
        and object   = 'SMOD'
        and devclass = v_devclass.
    select single * from tstct
      where sprsl eq sy-langu
        and tcode eq p_tcode.
    format color col_positive intensified off.
    write:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    skip.
    if not jtab[] is initial.
      write:/(95) sy-uline.
      format color col_heading intensified on.
      write:/1 sy-vline,
      2 'Exit Name',
      21 sy-vline ,
      22 'Description',
      95 sy-vline.
      write:/(95) sy-uline.
      loop at jtab.
        select single * from modsapt
        where sprsl = sy-langu and
        name = jtab-obj_name.
        format color col_normal intensified off.
        write:/1 sy-vline,
        2 jtab-obj_name hotspot on,
        21 sy-vline ,
        22 modsapt-modtext,
        95 sy-vline.
      endloop.
      write:/(95) sy-uline.
      describe table jtab.
      skip.
      format color col_total intensified on.
      write:/ 'No of Exits:' , sy-tfill.
    else.
      format color col_negative intensified on.
      write:/(95) 'No User Exit exists'.
    endif.
else.
    format color col_negative intensified on.
    write:/(95) 'Transaction Code Does Not Exist'.
endif.
Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.

ABAP CODE TO POPULATE LOGICAL SOURCE SYSTEM

Hi Friends please help me with the below
1. Requirement : to Populate The system Date , Source System
in BI for Each load request.
1 Solution: I thought of writing the Start Routine for this but it is giving me error
syntax Error: END METHOD MISSING?????
2. Also I have requirement to populate 0sourcsys source system id, can any body help how to populate that.
Thanks
Poonam Roy
ABAP Code.
I have the End Method. what more to do.
METHOD start_routine.
*=== Segments ===
FIELD-SYMBOLS:
<SOURCE_FIELDS> TYPE tys_SC_1.
DATA:
MONITOR_REC TYPE rstmonitor.
$$ begin of routine - insert your code only below this line -
... "insert your code here
FORM STARTROUTINE
USING G_S_MINFO TYPE RSSM_S_MINFO
CHANGING DATAPAK type TRANSTRU
ABORT LIKE SY-SUBRC.
DATA: ZLOAD_DAT LIKE SY-DATUM
ZZSOURSYS TYPE RSLOGSYS
IF G_S_MINFO-DATAPAKID=1
SOURCE_FIELDS-ZLOAD_DAT = SY-DATE.
SOURCE_FIELDS-ZZSOURSYS = G_S_MINFO-LOGSYS.
ENDIF.
ABORT = 0.
ENDFORM.
ENDMETHOD.
ENDCLASS.
*-- fill table "MONITOR" with values of structure "MONITOR_REC"
*- to make monitor entries
... "to cancel the update process
raise exception type CX_RSROUT_ABORT.
$$ end of routine - insert your code only before this line -
ENDMETHOD.

You have to write the code (in BI/BW) in the transfer rule (between Datasource transfer structure and infosource/info object)
There the FORM begin with
[code]USING RECORD_NO LIKE SY-TABIX
 TRAN_STRUCTURE TYPE TRANSFER_STRUCTURE
 G_S_MINFO TYPE RSSM_S_MINFO
CHANGING RESULT TYPE /BI0/OIPERSON
 G_T_ERRORLOG TYPE rssm_t_errorlog_int
 RETURNCODE LIKE SY-SUBRC
 ABORT LIKE SY-SUBRC. set ABORT <> 0 to cancel datapackag[/code]
GS_MIN_INFO structure RSSM_S_MINFO contains information on the request being processed.
G_S_MINFO. This passes technical information about the data load request,
such as requesting user, request date and time, update mode, the handling of
duplicate records, error handling flags, parallel processing flags, and what data
targets to update.
If tou want to use start-routine for optimization reasons and fill an empty field in transfer structure, the structure G_S_MINFO is available too.
[code]USING G_S_MINFO TYPE RSSM_S_MINFO
CHANGING DATAPAK type TAB_TRANSTRU
 G_T_ERRORLOG TYPE rssm_t_errorlog_int
 ABORT LIKE SY-SUBRC. set ABORT <> 0 to cancel datapackage[/code]
And stay in FORM between limits :
[code]$$ begin of routine
$$ end of routine[/code]
Update RESULT in first case, and field(s) of DATAPAK in second case.
[code]RESULT = G_S_MINFO-LOGSYS.[/code] or
[code]LOOP AT DATAPAK INTO l_s_datapak_line.
l_s_datapak_line-zzsourcsys = G_S_MINFO-LOGSYS.
MODIFY DATAPAK FROM l_s_datapak_line.
ENDLOOP.[/code]
Regards

ABAP code for custom OLAP variables

Hi experts,
We have a custom variant set as customer exit that I have just added to an infopackge for the data selection of 0FISCYEAR infoobject via 7-OLAP Variant. When I click on the magnifying glass under the "details for Type" column, the "Use Variable of OLAP Processor" window appears showing the OLAP Variable and the fiscal year variant. When you hit F6 (check) it should process the variant and return data for the ranges. With this variant we are using there is not data being returned (using the SAP exit variants data is returned).
I have gone through the forums and have seen people citing the function module EXIT_SAPLRRS0_001 as this is the user exit which houses such abap code. I have seen the variant inside this module and the code itself, but why is it in the infopackage when I click on check (F6) no data is returned? I am getting the feeling this abap code is only executed for reporting. In this case I want the infopackage to select certain data from R/3 (via the use of OLAP variable with custom code) during the load to the ODS.

Hi Mark,
If you created the custom fiscal year variant as a customer exit type, I doubt that it'll work.
Variant is an auxiliary time characteristic. You cannot create it. You can only add new char values:
BW Customizing Implementation Guide (SPRO tcode) -> Business Information Warehouse -> General BW Settings -> Maintain fiscal year variant.
Though, maybe I misunderstood your requirements.
Best regards,
Eugene
Message was edited by: Eugene Khusainov

What are the steps to optimise ABAP code

What are the steps to optimise ABAP code, that is how to increase the performance of a code?

Hi
Welcome to SDN forum
1) Dont use nested select statements
2) If possible use for all entries in addition
3) In the where addition make sure you give all the primary key
4) Use Index for the selection criteria.
5) You can also use inner joins
6) You can try to put the data from the first select statement into an Itab and then in order to select the data from the second table use for all entries in.
7) Use the runtime analysis SE30 and SQL Trace (ST05) to identify the performance and also to identify where the load is heavy, so that you can change the code accordingly
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d0db4c9-0e01-0010-b68f-9b1408d5f234
ABAP performance depends upon various factors and in devicded in three parts:
1. Database
2. ABAP
3. System
Run Any program using SE30 (performance analys) to improve performance refer to tips and trics section of SE30, Always remember that ABAP perfirmance is improved when there is least load on Database.
u can get an interactive grap in SE30 regarding this with a file.
also if u find runtime of parts of codes then use :
Switch on RTA Dynamically within ABAP Code
*To turn runtim analysis on within ABAP code insert the following code
SET RUN TIME ANALYZER ON.
*To turn runtim analysis off within ABAP code insert the following code
SET RUN TIME ANALYZER OFF.
Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
Avoid for all entries in JOINS
Try to avoid joins and use FOR ALL ENTRIES.
Try to restrict the joins to 1 level only ie only for tables
Avoid using Select *.
Avoid having multiple Selects from the same table in the same object.
Try to minimize the number of variables to save memory.
The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
Avoid creation of index as far as possible
Avoid operators like <>, > , < & like % in where clause conditions
Avoid select/select single statements in loops.
Try to use 'binary search' in READ internal table. Ensure table is sorted before using BINARY SEARCH.
Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)
Avoid using ORDER BY in selects
Avoid Nested Selects
Avoid Nested Loops of Internal Tables
Try to use FIELD SYMBOLS.
Try to avoid into Corresponding Fields of
Avoid using Select Distinct, Use DELETE ADJACENT
Check the following Links
Re: performance tuning
Re: Performance tuning of program
http://www.sapgenie.com/abap/performance.htm
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
check the below link
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
See the following link if it's any help:
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
Check also http://service.sap.com/performance
and
books like
http://www.sap-press.com/product.cfm?account=&product=H951
http://www.sap-press.com/product.cfm?account=&product=H973
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
Performance tuning for Data Selection Statement
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
Debugger
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
Run Time Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617cafe68c11d2b2ab080009b43351/content.htm
SQL trace
http://help.sap.com/saphelp_47x200/helpdata/en/d1/801f7c454211d189710000e8322d00/content.htm
CATT - Computer Aided Testing Too
http://help.sap.com/saphelp_47x200/helpdata/en/b3/410b37233f7c6fe10000009b38f936/frameset.htm
Test Workbench
http://help.sap.com/saphelp_47x200/helpdata/en/a8/157235d0fa8742e10000009b38f889/frameset.htm
Coverage Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c7/af9a79061a11d4b3d4080009b43351/content.htm
Runtime Monitor
http://help.sap.com/saphelp_47x200/helpdata/en/b5/fa121cc15911d5993d00508b6b8b11/content.htm
Memory Inspector
http://help.sap.com/saphelp_47x200/helpdata/en/a2/e5fc84cc87964cb2c29f584152d74e/content.htm
ECATT - Extended Computer Aided testing tool.
http://help.sap.com/saphelp_47x200/helpdata/en/20/e81c3b84e65e7be10000000a11402f/frameset.htm
Just refer to these links...
performance
Performance
Performance Guide
performance issues...
Performance Tuning
Performance issues
performance tuning
performance tuning
You can go to the transaction SE30 to have the runtime analysis of your program.Also try the transaction SCI , which is SAP Code Inspector.
1 Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
2 Avoid for all entries in JOINS
3 Try to avoid joins and use FOR ALL ENTRIES.
4 Try to restrict the joins to 1 level only ie only for 2 tables
5 Avoid using Select *.
6 Avoid having multiple Selects from the same table in the same object.
7 Try to minimize the number of variables to save memory.
8 The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
9 Avoid creation of index as far as possible
10 Avoid operators like <>, > , < & like % in where clause conditions
11 Avoid select/select single statements in loops.
12 Try to use 'binary search' in READ internal table. Ensure table is sorted before using BINARY SEARCH.
13 Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)
14 Avoid using ORDER BY in selects
15 Avoid Nested Selects
16 Avoid Nested Loops of Internal Tables
17 Try to use FIELD SYMBOLS.
18 Try to avoid into Corresponding Fields of
19 Avoid using Select Distinct, Use DELETE ADJACENT.
Reward points for useful Answers
Regards
Anji

ABAP code to set Infopackage Monitor to "RED" status?

Similar Messages

Maybe you are looking for