ABAP how to suppress Application toolbar on the screen

Hi all
As far as my knowledge is concerned I know we can't suppress the application toolbar in module pool programming (in the screen painter) but if is there any way to do that ?
Regards,
Mahesh

Yes it is. Or to be precise - depending on your definition of "Application toolbar". For example, read the help text of SET pf-status.

Similar Messages

How to get applications to fill the screen

Hey,
I have been meaning to ask this for some time but how does one get say the safari window to fit the screen without going into the display preferences and changing the display ratio. If I use a pc (heaven forbid) I can just click the full screen Icon and hey presto all the screen is used. But my beloved Mac does not. What am I to do?........ Woe is me

Mac OS X does not have a +full screen+ mode like Windows, because it would be a waste of screen real estate to simply expand a window to fill the entire screen. What it does have is a one click expand to largest possible optimum windows size command. Click the GREEN orb at the upper left corner of the window. The window will expand (or in some cases contract) to a size that displays everything on the window without being any taller or wider than necessary. If the window content happens to exceed the width or height of the screen resolution, then it will expand to the largest possible size for the screen. The menu bar will remain and the Dock (if visible) will not be covered up by the expanded window.
There are a few apps that act differently. For example, iTunes switches between the standard iTunes interface window and the little Mini-Player when you click the on the green orb.

How to create application toolbar in modal dialog box in selection-screen

Hi Experts,
how to create application toolbar in modal dialog box in selection-screen?
Regards,
Swapnika

Hi,
Check the following link regarding Model dialog box and appication toolbar
http://help.sap.com/saphelp_nw70/helpdata/en/d1/801b84454211d189710000e8322d00/frameset.htm
It helps in solving your problem.
Thanks.
Ramya.

How to use application item in the page template

How to use application item in the page template.
Thanks,
rajendra

Hi,
You can refer application item value in template like &MY_ITEM. (note period at end)
http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35125/concept_sub.htm
Regards,
Jari

How Does an Application connect to the DB after authentication

We working on a prototype to implement the OID
and achieve Single Sign On.
We have an OID installed,
The wallet manager installed.
The Wallet Client Installed.
We have an DN entry created into the OID.
We then login into the Wallet client.
How do we connect to the database..?
Or how will an application connect into the database.
We have the users created into the database as:
"create user <username> identified globally as <Complete DN for the user>;"
Is it through Net8 LDAP Native Naming Adapter.
Where can I find some more info on this LDAP Native Naming Adapter.
Regards,
Puneet

Hello Puneet:
Are you trying to acheive Enterprise user authentication useing OID? If so you should visit our Advanced Security web page
located at:
http://otn.oracle.com/deploy/security/aso/content.html
There are a few technical whitepapers you should read there. Namely "Enterprise user security" and
"Oracle Advanced Security: Security and Directory Integration"
Let me knwo if this helps
Jay

How to set default values on the screen painter parameters?

Hello ABAP Gurus,
I would just want to ask how to set default values on the screen painter parameters.
Thank you for your replies.

Hi,
To set default values for screen painter parameters initialize the field names with default values in the PBO module....
say u have the field name as f_field1....
in the PBO of that screen initialize it....
f_field1 = '100' "here 100 is the default value.
<b>reward points if useful.</b>
regards,
Vinod Samuel.

Application toolbar of selection screen

Hi,
I'd like to add SEPARATOR (not button) to application toolbar of selection screen. Is it possible?
Thanks
Radoslaw

Hi Kltys,
Check the following sample programs:
Selection Screen :
demo_sel_screen_with_subscreen.
demo_sel_screen_as_subscreen.
demo_sel_screen_in_tabstrip.
demo_sel_screen_with_tabstrip.
DEMO_SEL_SCREEN_PUSHBUTTON
D_ANALYSEREPORT_EABP_BUTTONS
Reward Points if this helps.
Manish
Message was edited by: Manish Kumar

How do i fix my itouch. the screen is black but it still responds to touch

How do i fix my itouch. the screen is black but it still responds to touch

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

How to give error message for the screen element text field when wrong i/p

How to give error message for the screen element text field when wrong i/p
when wrong input given
eg.
I have a text box with SBOOK-CARRID
so when user give wrong entry in text box i.e LG
then I should give some error stating that the the input is invalid or not available ,
now it showing the error of standard messages,
i want manual message to be displayed when error comes.
Thank you,
Regards,
Jagrut Bharatkumar Shukla

Hi all,
Thank you for your valuable reply,
but the thing is that its a screen field,
i.e text box not a selection screen
i created in screen layout
with name sbook-carrid
now i want to get error message display if wrong i/p is given
thank you.
Regards,
Jagrut bharatkumar Shukla,

Hi how much is it to replace the screen on the 5c?

hi how much is it to replace the screen on the 5c?
Also what does my warranty look like if I bough the phone in October 2013?
How long would it take to fix?

Not apple store repair broken screens.
no warranty for accidental damage, you would have to buy an out of warranty 5C, not sure on the price.

Please tell me how to go back to a long text I wrote and then i must have accidentally swiped the screen one way or another. How do I go back to the screen so I don't have to re-write the whole text?

Please tell me how to go back to a long text I wrote and then i must have accidentally swiped the screen one way or another. How do I go back to the screen so I don't have to re-write the whole text?

Cloud takes over https://forums.adobe.com/thread/1584746 may help

How much it costs to fix the screen of an ipad starry

how much it costs to fix the screen of an ipad starry??????

Apple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications.
Out-of-Warranty Service
If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace (Apple doesn't repair) your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below. (The replacement will most likely be a refurbished iPad in a brown box, however, it has a new screen, back and battery.)
iPad model
Out-of-Warranty Service Fee
iPad mini
$219
iPad 3rd, 4th generation
$299
iPad 2, iPad
$249
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service. See http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
You may can get the iPad repaired at 3rd party repair sources for less $, however, any remaining Apple warranty will be voided.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/
 Cheers, Tom

I bought iMac 27 quad core i7 last June. Last month i have noticed lots of dark patches on the screen and now they are growing more. i bought this from US but now i have moved to Kuwait. How much it cost to replace the screen?

I bought iMac 27 quad core i7 last June. Last month i have noticed lots of dark patches on the screen and now they are growing more. i bought this from US but now i have moved to Kuwait. How much it cost to replace the screen?

Mac and Mac models are picky about the RAM the Mac needs to see and use.
As you have found out, the 1067 speed RAM will not work in your year and model iMac.
You need the 1333 speed RAM.
If, you can return the RAM for a refund, do it!
If not, try online Mac RAM source and seller Crucial memory. They have a table that matches your Mac to the correct and reliable RAM. You may need to contact them to see whether or not they ship to South Africa, though.
If Crucial dpesn't work out, here's the specs for your year and model iMac that you need to seek out and purchase.
Maximum Memory
32 GB (Actual) 16 GB (Apple)
Memory Slots
4 - 204-pin PC3-10600 (1333 MHz) DDR3 SO-DIMM
Good Luck!

INSTALLING LION for the first time how long does it take. The screen is white, nothing is happening?

Installing Lion on a new imac. How long does it take. The screen it white for awhile?

After downloading it, which can be like watching grass grow, it should take about 20-30 minutes. However, if it's a new computer, why would you installing it?

How to Refer Application item in the html region

Hi All,
I have region which says 'Data was refereshed on 12-Apr-2010'. This is displayed in many pages. I want to reduce the manual work of going into each and every page and editing the date.
I have created an Application Item in shared components. Can anyone help me how to refer this application item in the html region?
Thanks,
Vikas

You can use the syntax of : &<ITEM_NAME>.
i.e. say I have an application item MY_NAME , I would then have a html region which has the following
<p>My name is &MY_NAME.</p>see: http://download.oracle.com/docs/cd/E14373_01/appdev.32/e11838/concept.htm#BEICHBBG
Trent

ABAP how to suppress Application toolbar on the screen

Similar Messages

Maybe you are looking for