ABAP - INTERFACE_REGISTRATION_ERROR for outboud sync ABAP proxy

Hi,
I have created ABAP sync client proxy in R/3 and trying to test using abap report. I am facing following error in XI sxmb_moni.
I have created client proxy for outbound sync interface, however the error is pointing inbound sync interface (ie QAChkR3_Sync_Mimicking).
Even I tried creating proxy for given inbound interface but same error exists.
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">INTERFACE_REGISTRATION_ERROR</SAP:Code>
<SAP:P1>ifmmessif</SAP:P1>
<SAP:P2>QAChkR3_Sync_Mimicking</SAP:P2>
<SAP:P3>http://ls.att.com/Exacta/QACheck_Mimicking</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No implementing class registered for the interface (type ifmmessif, name <u>QAChkR3_Sync_Mimicking</u>, namespace http://ls.att.com/Exacta/QACheck_Mimicking )</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Please help.
Pratibha.

Hi Krishna,
Proxy in R/3 is reactivated still the error persists.
There are few more o/b proxies which are running fine.
Even LPCONFIG txn is done properly.
I wonder why the error is for inbound proxy when I am trying to test outbound sync proxy.
I dont have sap marketplace id to check the given notes. Will you pls brief about it.
Pratibha.

Similar Messages

Sync HTTP to ABAP proxy

Hi:
I am looking for a Sync HTTP to ABAP proxy scenario screenshots.
Can someone help?
Thnx

HI,
See the below links
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
http://help.sap.com/saphelp_nw2004s/helpdata/en/48/d5a1fe5f317a4e8e35801ed2c88246/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/ba/f21a403233dd5fe10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/41e08c90-0201-0010-9197-d8774336ea78
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0ae9874-109c-2910-f48a-e91f0cdd1c81
/people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
Regards
Chilla

ABAP proxy to Stored procedure on MySQL sync

Hi,
I have one question regarding above scenario. Scenario is like this: user will run sync scenario from some ABAP report, which will connect to PI through ABAP proxy, execute some stored procedure on MySQL server, get data back and update some Z-table in SAP.
My concern is beacuse of stored procedure and some weird situations. Stor.procedure selects data and immediately after does update on same data. What I happend in my situation. I ran it for the first time, with debugger, ABAP proxy made call and returned data, but because of compiling and debugging, I lost connection and I LOST DATA, because stored procedure made select and update and I don't have this data anymore. Is there any chance to restart this kind of process? I know this will not happend usually, but want to be sure.
thx
Edited by: Mario Slopar on Sep 6, 2011 10:58 AM

I lost connection and I LOST DATA, because stored procedure made select and update and I don't have this data anymore. Is there any chance to restart this kind of process?
Mario - Try the tcode - SXMB_MONI to check the message that was sent from SAP to PI, as you say you lost the connection in between while debugging the failed message will be listed after you run the above Tcode. You will be able to restart the message from the same screen.
Also, i presume that the scenario is a synchronous one - SAP<->PI<->SQL, i would suggest you try and decouple the systems involved by making calls Asynchronous(depending on the business needs ofcourse)
Regards,
Chen

How to change default PIRWBUSER password for ABAP Proxy monitoring ?

Hi,
Please advise how to change setting for PIRWBUSER in PI so no need to use master password PI in ECC server.
In the Message monitoring you can have option to monitoring ABAP Proxy transaction in the other SAP Instance. But of course you need to have PIRWBUSER in that target SAP instance.
How to change this configuration for PIRWBUSER for other SAP Instance. because other SAP instance it migh have different password for PIRWBUSER ?
Regards
Fernand

Hello there.
Please check the note below according to your system:
#999962 - PI 7.10: Change passwords of PI service users
#936093 - XI 7.0: Changing the passwords of XI service users
#721548 - XI 3.0: Changing the passwords of the XI service users
Regards,
Caio Cagnani

Can ABAP proxy to consume WSDL file be run as background job for every10min

Hi all,
I have a requirement where I need to build an interface which gatheru2019s the purchase order details and send to external third party software in their required format (as an XML file).
So I should be the first point of contact and should trigger the interface each time a purchase order is generated.
So I am thinking that I should develop a background job for every 10 minutes which will look for new purchase orders and gathers the information of the purchase orders and send them to external third party software in their required format.
I have gone through all the SAP forums and e-Learning but still I have confusion in regards to how is it possible technically? Can some one guide me with some information on the same.
I have a little bit of confusion and want to know few things.
1)     Should I create a web service or should I consume a web service?
2)     If I need to consume a web service, then can I write an ABAP proxy to be run in background fro evry 10 minutes? I mean can we run ABAP proxy as a batch job in the background?
3)     Is there a difference between consuming an XML file and WSDL File?
Any Help will be highly appreciated.
Regards,
Jessica.

There are two options (as I know) to generate XML file.
1. Use XML TRANSFORMATION to get the XML string based your TRANSFORMATION. You can input your data and get back the XML string. Download this string to a file
Test XML generation program is:
types: begin of ty_data,
       num   type i,
       end   of ty_data.
DATA: itab TYPE standard table of ty_Data,
      la_data like line of itab,
      xmlstr TYPE string.
DO 3 TIMES.
la_data-num = sy-index.
APPEND la_data TO itab.
ENDDO.
CALL TRANSFORMATION ztest_np1
SOURCE table = itab
RESULT XML xmlstr.
CALL FUNCTION 'DISPLAY_XML_STRING'
EXPORTING xml_string = xmlstr.
My ZTEST_NP1 transformation. To create a transformation, click on the transformation in the "CALL TRANSFORMATION ztest_np1" statement. Select Simple transformation type.
<?sap.transform simple?>
<tt:transform xmlns:tt="http://www.sap.com/transformation-templates">
<tt:root name="table"/>
<tt:template>
    <table>
      <tt:loop ref=".table">
        <item>
          <tt:value ref="NUM"/>
        </item>
      </tt:loop>
    </table>
</tt:template>
</tt:transform>
XML string is like:
<?xml version="1.0" encoding="utf-8" ?>
<table>
<item>1</item>
<item>2</item>
<item>3</item>
</table>
To use this option, you have to create a transformation and than use it to generate the XML string.
Check this SAP Help
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/7d4719ca581441b6841f1054ff1326/frameset.htm
2. You can concatenate and create an XML string and download that string into a file.
Regards,
Naimesh Patel

Message flow in SAP PI 7.31 JAVA only for ABAP Proxy synchronous scenario with Oracle DB

Dear Experts,
I am working on a synchronous scenario Sender ABAP Proxy <===> SAP PI 7.31 JAVA only <===> Oracle Database.I have successfully
configured all the proxy configurations as well both Sender SOAP and JDBC receiver channels are showing no error when pinged from
Cc monitoring in NWA.
1.During testing at Tx SPROXY , I am triggering a message and after 5 minutes I receive an PARSING error message with 2 messages in ECC
local IE i.e. Tx SXMB_MONI.
Note : In NWA , I can see only 1 message that too in cancelled status.
2.Seeing the trace of the messages I assume that the messages have not moved from sender ECC system. I am still confused with flow of message
from the Message Audit log. Audit log of error messages.Could any one share the full Audit log of a successful message generated in SAP PI 7.31 JAVA only.
3.I observed that the QIN Scheduler status in ECC is in INACTIVE status. There is no queue id for 2 messages generated in ECC. Does
it should in ACTIVE status in Tx SMQR..
Regards
Rebecca

Hi Thomas,
Valuable inputs..
1. Since I don't have any audit log for successful message, would you be able to share referring to the
below screenshot whether the message was put into receiver JDBC adapter and JDBC adapter tried to retrieve the Select response from Oracle Database.
2.I have done some setting in Advance mode of the receiver JDBC to increase the time out and other parameters as per SAP note but still the issue is same. If you perhaps have some experience in such scenarios, please share some input so that I can ask the Oracle Database administrator exactly what is required from our side.
3.Regarding the slow response from Oracle , there was some suggestion that the datatype of the request and response should match the column name of the Oracle database. I did that.. Do you have any more suggestion that may be hampering the generation of the response message from the Oracle like SAP note or document.
Regards
Rebecca

SOAP error in synchronous scenario for ABAP Proxy with Oracle D/B

Dear Experts,
I am working in Sender ABAP Proxy <====>SAP PI 7.31 JAVA only <====> Oracle Database. My proxy configuration are working successfully.
Apart from that, I have maintained a SOAP sender communication channel under the ECC business system with
Transport Protocol as HTTP
Message Protocol as XI 3.0
Adapter Engine as Central Engine
When I am testing from ECC at Tx SPROXY, I am receiving following error.
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.xi.routing.RoutingException: InterfaceDetermination did not yield any actual interface at com.sap.aii.adapter.soap.web.SOAPHandler.processSOAPtoXMB(SOAPHandler.java:746) at com.sap.aii.adapter.soap.web.MessageServlet.doPost(MessageServlet.java:505) at javax.servlet.http.HttpServlet.service(HttpServlet.java:754) at javax.servlet.http.HttpServlet.service(HttpServlet.java:847) at
1. In XI3.0 protocol, I can not select BE but when selected HTTP 1.0 as Message protocol then I can find the BE.
2. No Response message is shown in ECC when testing the message.
3. How do Receiver JDBC adapter for Oracle Database is configured
4. What would be Message Protocol for Oracle Database i.e. XML SQL Format or Native SQL format for Select operation.
Please guide.. All your inputs will be appreciated......
Regards
Rebecca

Dear Indrajit,
Appreciate your inputs.. Yes I have configured all the ABAP proxy configurations and there no question of missing any thing as Tx SLDCHECK in ECC is working perfectly fine.
But still to go, some of the queries needs more input.
1.In ID, i have created a Sender SOAP communication channel with listed details.
Transport Protocol as HTTP
Message Protocol as XI 3.0
Adapter Engine as Central Engine
Is there any parameters which I may be missing from Module tab of Synchronous SOAP Cc ?
2. In the Cc monitoring, the JDBC receiver status shows "Database operation successfully completed" but I could not find any response data from database. The Message monitoring should have 2 messages for 1 trigger, but I could find only 1 message by SOAP only?
Sorry to bother experts...Please answer in sequence...
Regards
Rebecca

WSDL error during generation of ABAP proxy for web service

Hi friends,
I am getting error during the generation of ABAP proxy object for web service developed in .NET .
Error : Proxy generation terminated: WSDL error (<extension> not supported).
How to make this WSDL file compatible for ABAP proxy.
I have tried to edit WSDL file in XML Spy but did not get any option to replace/remove the tag <extention>.
If any one worked on this. Please help me its urgent.
Thanks and regards,
Shivanand.

HI ,
I am having the same issue!!!
Does ABAP Proxy Generation support <extension> ?
Is there a list available of what is supported and what not (please consider I do not have access to sap notes)?
Thanks

How to check for Web Srvice Timeout in ABAP Proxy call

I am calling a web service in my ABAP program using ABAP proxy. The code is as under:
TRY.
      y_v_request-mt_request-yaskkey   = y_l_matnr.
      y_v_request-mt_request-maktx      = y_l_maktx.
      y_v_request-mt_request-ymtart     = y_l_mtart.
      CALL METHOD y_v_prxy->execute_synchronous
        EXPORTING
          output = y_v_request
        IMPORTING
          input = y_v_response.
    CATCH cx_ai_system_fault INTO y_v_fault.
      y_v_message = y_v_fault->errortext.
ENDTRY.
y_l_ycod = y_v_response-mt_response-answer.
1. Is there is any way to know that the called web service has timed out ?
2. Is it possible to check for the time spent in the call if it is more then say 500 sec then it should be considered as timeout?
Any help will be appreciated.
Thanks in advance

Hi Subbu,
you can catch CX_AI_SYSTEM_FAULT.
DATA:   lo_sys_exception TYPE REF TO cx_ai_system_fault,
l_error_text type string.
CALL METHOD ...
CATCH cx_ai_system_fault INTO lo_sys_exception.
l_error_text = lo_sys_exception->errortext.
You can configure XI timeout parameter (for shure in SMICM / Parameter and, if i remeber right, as profile parameter in XI administration).
Regards,
Udo
Message was edited by: Udo Martens

How to configure systems for ABAP Proxy use

Can somebody please point me to the documentation regarding the configuration settings for the use of ABAP proxies, on both the XI and client sides? I have performed readiness checks as specified by SAP, the ABAP Proxy tests all pass, yet when I write a program with a proxy, the message does not appear in the integration engine monitor.
I think I have missed something in configuration settings, but don't know for sure. hence the request.
Kind Regards,
Tony.

Hi,
Please follow the below configuration steps for ABAP proxy:
ABAP Proxy configuration:
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Thnx
Chirag

What is package structure for Client ABAP Proxy?

1. What is the package structure need to be followed for creating abap client proxy.
2. I read some where in the form, it need to be 4 levels. Why is it?
Thank you
Ganges Leaves

Hi
U hav to create a 4 level package structure for client ABAP proxy.
U can create ur on packages
1st level-structure package.
2nd level-main package.
3rd and 4th level-sub packages.
To the 4th level only u hav to create proxy.
The classes and code wil be automatically generated at the time of proxy creation.
I think the 4 level structure bcz while in r/3 everythin in integration builder like software component version and all wil be takin as different levels.
Also u can go through the weblogs in the above replies u got.
Regards
Victoria.

Creation of package structure for ABAP proxy scenario

Hi All,
I have a doubt on package structure used for ABAP proxy scenario. What is the specific reason to create a four level package structure? Can some one please explain? Thanks in advance.
Regards,
Sudheer.

Hi Sudheer,
Can you pls clarify what do you mean by 'four level package structure' ?
Are you referring to the ABAP structures that get created during creating the proxy by SPROXY transaction ? These structures get automatically created. We simply have to write the code using these structures.
Or do you mean the 'package' which is mandatory to create a transportable ABAP object ? i.e. transport from Development to Staging and then Production.
Regards,

ABAP proxy based on XSD with specific requirement for NAMESPACE

Hi
I'm using PI 7.11
My scenario is an ABAP proxy from SAP backend to filereceiver. NO mapping.
The SI is based on an XSD from our customer, which have a targetnamespace, so a namespace requirement of six chars namely "SBSFL1:nnn".
When sending the message from our SAP backend - SAP ALWAYS ignore this targetnamespace SBSFL1 and replaces it with nr1:nnn. Why? When taken the same XSD into xmlspy and generating sample XML et works great all nodes/fields have a prefix of SBSFL1 ....
Why is PI 7.11 ignoring this targetnamespace requirement. I was hoping this was possible to archive WITHOUT any XSLT mapping or other "tricks" in the MAPPING runtime (i want to avoid any mapping because of performance)
Hope for som help, since this is a major issue
Cheers and thx in advance

> Why is PI 7.11 ignoring this targetnamespace requirement.
Because there is no standard having a specific namespace prefix.
It does not make any difference which namespace prefix is used.
Unfortunatly some developers don't about the XML standards and expect a specific namespace prefix, like PIDX.
Blame them
Regards
Stefan

ABAP Proxy for 10 million records

Hi,
I am running a extract program for my inventory which has about 10 million records.
I am sending through ABAP proxy and job is cacelled due to memory problem.
I am breaking up the records while sending through ABAP proxy..
I am sending about 2000 times proxy by breaking the number of records..
do you think ABAP proxy would able to handle 10 million records..?
Any advice would be highly appreciated.
Thanks and Best Regards,
M-

Hi,
I am facing the same problem. My temporary solution is to break up the selected data into 30.000 records and send those portions by ABAP proxy to PI.
I think the problem lies in the ABAP to xml conversion (call transformation) within the proxy.
Although breaking up the data seems to work for me now, it gives me an other issue: I have to combine the data back again in PI.
So now I am thinking of saving all the records as a dataset file on the application server and using the file adapter instead.
Regards,
Arjan Aalbers

ABAP Proxy connection Between PI and SRM for XMLs

Hello Experts,
We are trying to set up ABAP proxy connection between PI 7.1 and SRM so we can send XML from SRM into PI.
Our SRM developer is getting an SLD error (below) and seems like something is not set up right in the SLD. Could you help me out with any kind of blog/documention on setting up an ABAP proxy connection between PI and an ABAP system. Something that talks about what steps we need to take in PI and SRM.
error ...
*We saw the error during debugging. This error is preventing XML output
to be sent to PI.
BBP_BD 002 An SLD system has not been assigned to logical system
Thanks,
Mayur

Thanks all for a quick reply. I also had to take following step to achieve the task.
adding the XI system to the SRM config - SRM Server -->
Technical basic Settings --> Define System Landscape? (also please
associated documentation in that link for XI)
Thanks,
Mayur

ABAP - INTERFACE_REGISTRATION_ERROR for outboud sync ABAP proxy

Similar Messages

Maybe you are looking for