ABAP+JAVA Systemcopy - Wrong sapgw after the copy
For our BI system, we did an ABAP+JAVA systemcopy that appeared to complete successfully. Both ABAP and JAVA start cleanly but when we execute the URL to logon through the Java, we now get this error:
Application error occurred during request processing.
Details: java.lang.NullPointerException: null
Exception id: [001E0B50DDFD002C0000000000006655000483965C5A18B6]
In my server0 logs, I find the following issue:
[Thr 198] * ERROR partner 'localhost:sapgw55' not reached
That is the sapgw from our Production system, not the refreshed Development system. Obviously, I made a mistake somewhere in the copy. The question is whether this can be resolved post-refresh? Or do I have to do the whole systemcopy over again (a big task)?
The ABAP side works find so I'm really baffled as to how this sapgw could be off only on the Java side.
Thanks.
I find some entries in the default.trc that have a "Caused by" for Child not found. But when I search just on the Exception ID, I only have this message:
The error is: java.lang.NullPointerException: null^M
Exception id: [001E0B50DDFD00190000003400006655000483CD8B19DAC9]#
#1.5^H#001E0B50DDFD00270000000300006655000483CDA6B50994#1270819171238#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#sap.com/irj#com.sap.engine.services.servlets_jsp.client.RequestInfoServe
r#J2EE_GUEST#0##n/a##8842446043da11dfcff7001e0b50ddfd#SAPEngine_Application_Thread[impl:3]_20##0#0#Error##Plain###application [irj] Processing HTTP request to servlet [gateway] finished with error. The er
ror is: java.lang.NullPointerException
at com.sap.portal.navigation.Gateway.service(Gateway.java:126)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
#1.5^H#001E0B50DDFD00270000000500006655000483CDA6B50CD0#1270819171239#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#sap.com/irj#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#J2
EE_GUEST#0##n/a##8842446043da11dfcff7001e0b50ddfd#SAPEngine_Application_Thread[impl:3]_20##0#0#Error#1#/System/Server/WebRequests#Plain###application [irj] Processing HTTP request to servlet [gateway] fin
ished with error.^M
The error is: java.lang.NullPointerException: null^M
Exception id: [001E0B50DDFD00270000000300006655000483CDA6B50994]#
Similar Messages
-
Dialog Instances Java are not up after System Copy NW2004s SR2 ABAP+JAVA
Hello guys,
I have just performed a system copy of our BW system (douple stack NW2004s) wich consists from CI and 2 DIs. First I made an export using SAPINST (Software from SAP_BUSINESS_SUITE_2005_SR2 for sparc solaris), where I choosed in SAP Installation Master->SAp Netweaver 2004s Support Release 2->Additional Software Life-cycle Tasks->System Copy->Oracle->Source System->Central System->Based on ABAP and Java->Database and Central Instance Export. I couldn't find any special task for export java from my dialog instances, so I thought it would be ok like that. Then I used the same software on my target system, choosed ...Additional Software Life-cycle Tasks->System Copy->Oracle->Target System->Central System->Based on ABAP and Java->Central System Installation. In the Dialog input phase of SAPINST I indicated that use db specific tools to copy your database. So I made the database restore+recovery with our DB tools and continued withthe SAPINST and Import.
Afterwards the ABAP part and Java on the central Instance run perfect, but Java Stack is not up by both of Dialog Instances. I have checked the configtool on the server where the CI is running (the DIs are running on different linux servers) and couldn't see any entries for my dialog instances, only the CI was seable there. I tried to start configtool from the application server, but there I could find only the file config.properties in the directory /usr/sap/<SID>/.../j2ee/configtool/, others were simply not there, so it was impossible to start it. Have i forgotten something by EXPORT/IMPORT or I should just use other software for coping a System with douple stack on a CI and DIs? Or should I get configtools for Linux platform ( have searched but not found yet) and try to make the same changes wich i have done by the CI before i started Java on the CI? The most irritated point is that i can't see the dialog instanes in Configtool from the CI.
Any other suggestions and good advices?
Thanks a lot in advance.
Regards, PolinaHi Manoj, </p>
I have founded following information in the work directory of one of my dialog instances ( where the java stack doesn't want to start after the copy): /usr/sap/SID/instance/work/ <br>
1) std_server0.out is in the condition before the system copy, no new data was written there. <br>
2)dev_disp <br>
DpJ2eeStart: j2ee state = STARTED<br>
DpJ2eeLogin: j2ee state = CONNECTED<br>
Fri Feb 26 12:58:04 2010<br>
ERROR => DpJ2eeMsgProcess: NiRead failed (NIECONN_BROKEN) [dpxxj2ee.c 1212]<br>
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)<p>
Fri Feb 26 12:58:20 2010<br>
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN<br>
Fri Feb 26 12:57:20 2010<br>
***LOG Q0I=> NiIBindSocket: could not delete file '/tmp/.sapstream64984' for hdl 2: unlink (1: Operation not permitted) [nixxi.cpp 3207]<br>
ERROR => NiIBindSocket: could not delete file '/tmp/.sapstream64984' (hdl 2; errno=0) [nixxi.cpp 3214]<br>
WARNING => NiIBind: Could not bind local domain socket, only listening on internet socket [nixxi.cpp 3491]<p>
It seems that java is trying to start but something goes wrong and it have to shut down<p>
3)dev_bootstrap<br>
[Thr 1086335296] JLaunchIExitJava: exit hook is called (rc = 66)<br>
[Thr 1086335296] **********************************************************************<br>
ERROR => The Java VM terminated with a non-zero exit code.<br>
Please see SAP Note 943602 , section 'J2EE Engine exit codes'<br>
for additional information and trouble shooting.<br>
**********************************************************************<br>
[Thr 1086335296] SigISetIgnoreAction : SIG_IGN for signal 17<br>
[Thr 1086335296] JLaunchCloseProgram: good bye (exitcode = 66)<p>
4) jvm_bootstrap.out<br>
...<br>
Exception occurred:<br>
com.sap.engine.frame.core.configuration.NameNotFoundException: A configuration with the path "cluster_data/dispatcher/ID264509300" does not exist.
..<br>
Exception occurred:<br>
com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties!<br>
at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:476)<br>
at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:146)<br>
com.sap.engine.bootstrap.SynchronizationException: No such Dialog Instance (ID264509300) in the database! Check database consistency or local Bootstrap properties!<br>
[Bootstrap module]> Problem occurred while performing synchronization.<p>
j2ee/instance_id = ID2645093 <--- that is the ID of those DI where i took these traces from. So it seems that this ID is not in the database at all. Probably the infromation about the java stack of my DIs was not exported at all...<p>
Thanks in advance. <br>
Regards, <br>
Polina -
PI 7.0 ABAP Proxy Wrong Namespace after Client copy
Hello,
i am looking for an PI expert because we have some problems with a standard ABAP proxy interface.
We use the FSCM Module and we send Credit Commitment Notification from a SAP ECC 6.0 to PI 7.0.
We use the Interface CreditCommitmentNotification_Out and it works fine on the Development System (D46). But on the integration system (Q46) it doesn't work. The Q46 is build up from our production system (P46) by a system/client copy.
We get the error:
The payload include a wrong namespace for the proxy interface.
wrong: xmlns:prx="urn:sap.com:proxy:P46:/1SAI/TAS7DF374ECCA722B654BFE:700:2007/10/04"
correct: xmlns:prx="urn:sap.com:proxy:Q46:/1SAI/TAS7DF374ECCA722B654BFE:700:2007/10/04"
I dont know why we get the wrong namespace. I check the transaction SICF, SPROXY and SXMB_ADM and compare it with the customizing on our development system. I didnt find any gap.
Please help me if you have some ideas what is wrong on our system.
Regards
Jürgen 8-))Hi,
We experience the same problem after an upgrade from ECC 5.0 to 6.0
How did you solve this?
Ron -
Files still exist after the copying is disrupted
I have a problem when the large file copy from the laptop to the external USB HDD or NAS (via CIFS share). When the copy is disrupted (either the network is down or the power outrage to my external HDD), the file still exist in the folder but cannot be
read or open. The corrupted file is still showing full size of the file. How can I avoid this?Hi,
If you copy large files from the laptop to the external USB HDD or NAS, when the copy is disrupted, the files could be corrupted and we unable to read the file's contents. In general, your need to delete the file and copy the file again.
In additional, you could try to use diskpart to repair the disk to recover the files.
DiskPart Commands
http://technet.microsoft.com/en-us/library/cc770877%28v=ws.10%29.aspx
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
RSA1 infosources under wrong SID after system copy and BDLS has run
Hi we are a BW3.5 SP#21 system on 10202 and hpux 11.23 (ia64). We have an R/3 system connected to the BW system for extracts. Extracts work fine in the productive environment. So 1 production BW system, and 1 production R/3 system. We also have sandbox copies of each made from database copies recently. The environment is as follows:
sid client current logical system name original logical system name after "copy" system role
BW1 100 FINPBW1100 -- Productive BW system
LH1 100 FINPLH1100 -- Productive R/3 system
LHU 100 FINPLHU100 FINPBW1100 sandbox BW system
LHI 100 FINPLHI100 FINPLH1100 sandbox R/3 system
LHU is a copy of BW1. LHI is a copy of LH1. There is only 1 working client in all systems.
We recently did the copies, creating the LHU/LHI systems. we've completed our "post refresh" checklist on LHU/LHI, including the BDLS work.
BDLS was ran as follows on LHU/100:
>> convert FINPBW1100  FINPLHU100
>> convert FINPLH1100  FINPLHI100
BDLS was ran as follows on LHI/100:
>> convert FINPBW1100  FINPLHU100
>> convert FINPLH1100  FINPLHI100
In RSA1 on sandbox LHU/100, in the "source system" area, the source systems to the sandbox R/3 system LHI/100 tests out ok if you do the check connection and the technical name for the sm59 it points to is correct.
If I check the RSA1 --> Infosources though, and search for LHI .it doesn't find all the "expected" infosources/infopackages.
If instead I search for LH1 it finds the whole list of "expected" infosources/infopackages. But the R/3 system i'm trying to do extracts from is called "LHI" not "LH1".
QUESTION:
does anyone know what needs to happen to convert what we see in RSA1 --> Infosources when searching for LH1 to infosources that we can use which point to LHI it looks like all the data is there in RSA1 -->infosources, it just is under the wrong sid .thanks in advanceHi Ben,
Sorry to hear that my suggestion did not help. We will have to see what the other experts say!
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bff13df2-0c01-0010-6ba7-bc50346a6fd8
That link is to the document that I followed when setting up a BWQ system new, and we didn't encounter the same problem that you are experiencing. We are also BW 3.5.
I started on Page 17 which is where Section 3.7 starts.
Hopefully that might help, although that may have been what you were following.
Nick -
NW2004s: Homogeneous systemcopy ABAP + JAVA
When doing a combined ABAP + Java systemcopy via R3load procedure, the "old" configurations in the propertysheets on the filesystem may get lost.
What is the general procedure here to find out, what needs to be manually adapted after a systemcopy? I know the general "system copy guide" but that guide doesn't mention e. g. what to do if you copy EP 7.0 or a Solution Manager Diagnostics.
MarkusHi Markus
In case of EP the configurations will be retained in the target system.You can just do one more step that is exporting the userdata from the ume of the source system(instance) and then after the installation of targret instance import it.
Other configurations will be retained.There are two post installtion steps metioned in the system copy guide.Please perform the same.
In case of solution diagnotices i am not so sure.Will try to find out and let you know
Award points if usefull. -
System copy - NW2004s BI - ABAP & JAVA
Hi
We plan to create a new NW2004s (SRII) BI ABAP & JAVA system through a system copy. As this is java & abap it would seem using the sapinst method using the install CD would be best. I am looking for documentation for this method and I wondered if anyone else had tried this task.
Thanks in advance.
Matthew MilneHi,
there is a documentation under Installation Guides - Installation - System Copy for SAP Systems Based on NW 7.0 SR2 ABAP+JAVA.
We only did the copy for 640 and Java only.
Hope this helps.
Regards,
Ingrid -
ABAP+JAVA system copy using 3rd party export/import tools
Hi all,
I am trying to do a homogenous system copy. I am following the syscopy guide for SAP NW 7.0 SR3 ABAP+JAVA systems
We are running AIX 5.L and Oracle.
My question is this. We are using an IBM XiV system for our disk storage, and we are able to restore from "snaps" which is their version of images. Does anyone know if it is possible to restore or "import" the data in a system copy using an outside tool like this? If so, do you have any information on how to?
I know it is possible to restore the database from an offline backup using BRTools rather than r3load and jload, and I just wanted to see if I can restore from a snap as it would save a lot of time in the procedure.
Any help or ideas would be much appreciated.
Thanks!>My question is this. We are using an IBM XiV system for our disk storage, and we are able to restore from "snaps" which is their version of images. Does anyone know if it is possible to restore or "import" the data in a system copy using an outside tool like this? If so, do you have any information on how to?
That approach is not supported.
The reason is: combined instances write the instance name and hostname in various places, on the filesystem in .properties files, in the JDBC configuration, depending on the java applications you run on top in various other places. What you're trying to do is effectively "renaming" an instance.
Technically it's possible to do it and to get it run, yes, but the supported way is running sapinst and choose ABAP + Java system copy. This will prevent you from lots of (not really documented) manual work after the copy.
Markus -
System Copy from ABAP Stack to ABAP+Java Stack
Hi,
Is it possible to system copy (homogeneous or heterogeneous) from a system based on ABAP Stack to a system based on ABAP+Java Stack? Is it the normal system copy procedure or something aditional is required to do. Pl. advise. Thanks
regards
Edited by: Abdus Samad on Oct 24, 2008 8:13 AMIt depends on what you want to copy, a system copy will always wipe out the existing target. But if you want to only copy data, you might be able to do a client copy. You can start with this SAP note: [552711 - FAQ: Client copy|https://service.sap.com/sap/bc/bsp/spn/sapnotes/index2.htm?numm=552711]
Regards Michael -
Syncronization of ABAP+java stack during the upgrade.
Hi All,
We have successfully upgraded our BWD & BWQ which is ABAP+JAVA stack .
we have followed the process of uninstalling the java stack and removing the j2ee and SDM folder and starting the system for the upgrade.
Tomorrow we are going to start BWP , i found the way to syncronize the upgrade in upgrade manual like starting the SAPjup when upgrade asks for syncronization.
Can any one suggest me the process of starting the SAPjup for sync like already upgrade is running with SAPup and just waiting for SAPjup to sync it's just a norwal way of starting the SAPjup ? or anything.
But i am thinking to go in normal what we followed for the BWD&BWQ.
Please suggest...
Thanks,
Subhash.GPLease proceed with your old strategy it sounds better.
Regards,
iqbal -
All work process are ended(ABAP+JAVA)
Hi
Thank you so much
SAP version :- NW7.0 and installation type ABAP+JAVA , database oracle10g
I did the export of database from windows203(where i have install NW7.0 ABAP+JAVA) and i am able to import the database on AIX. but when i am pointing new installed database on AIX(I have disconnected the OLD DATABASE on CI) to windows CI after some time its ending all work process.
Log file:-
*_DEV_DISP_*
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Mon Aug 17 14:40:26 2009
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12168]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 276 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 276 (pos=3)
SiSelNRemove: removed sock 276
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/17
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 276
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 5128) [dpxxdisp.c 10421]
Good Bye .....
"dev_w0"
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Mon Aug 17 14:38:37 2009
B create_con (con_name=R/3)
B Loading DB library 'E:\usr\sap\SM1\DVEBMGS00\exe\dboraslib.dll' ...
B Library 'E:\usr\sap\SM1\DVEBMGS00\exe\dboraslib.dll' loaded
B Version of 'E:\usr\sap\SM1\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.144)
B New connection 0 created
M sysno 00
M sid SM1
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 144
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 5160
M
M kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 5160) [dpxxdisp.c 1305]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 25168 (1480)
M DpShMCreate: sizeof(tm_adm) 5652128 (28120)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 00000000109E0050, size: 6348592)
M DpShMCreate: allocated sys_adm at 00000000109E0050
M DpShMCreate: allocated wp_adm at 00000000109E2150
M DpShMCreate: allocated tm_adm_list at 00000000109E83A0
M DpShMCreate: allocated tm_adm at 00000000109E8400
M DpShMCreate: allocated wp_ca_adm at 0000000010F4C2A0
M DpShMCreate: allocated appc_ca_adm at 0000000010F52060
M DpShMCreate: allocated comm_adm at 0000000010F53FA0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 0000000010FDAC30
M DpShMCreate: allocated gw_adm at 0000000010FDACB0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0000000010FDACE0
M DpShMCreate: allocated wall_adm at 0000000010FDACF0
M
M Mon Aug 17 14:38:38 2009
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host sptsta251
M
M Mon Aug 17 14:38:39 2009
M calling db_connect ...
C Prepending E:\usr\sap\SM1\DVEBMGS00\exe to Path.
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPR3's password
C Connecting as /@SM1 on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 00000000127520C0 000000000A7DBDB0 000000000A7E15D8
C Attaching to DB Server SM1 (con_hdl=0,svchp=000000000A7E1498,srvhp=0000000012771118)
C
C Mon Aug 17 14:39:06 2009
C *** ERROR => OCI-call 'OCIServerAttach' failed with rc=12154
[dboci.c 4313]
C *** ERROR => CONNECT failed with sql error '12154'
[dbsloci.c 11044]
C Try to connect with default password
C Connecting as SAPR3/<pwd>@SM1 on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 00000000127520C0 000000000A7DBDB0 000000000A7E15D8
C Detaching from DB Server (con_hdl=0,svchp=000000000A7E1498,srvhp=0000000012771118)
C Attaching to DB Server SM1 (con_hdl=0,svchp=000000000A7E1498,srvhp=0000000012771118)
C
C Mon Aug 17 14:39:33 2009
C *** ERROR => OCI-call 'OCIServerAttach' failed with rc=12154
[dboci.c 4313]
C *** ERROR => CONNECT failed with sql error '12154'
[dbsloci.c 11044]
B ***LOG BV3=> severe db error 12154 ; work process is stopped [dbsh#2 @ 1199] [dbsh 1199 ]
B ***LOG BY2=> sql error 12154 performing CON [dblink#5 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-12154: TNS:could not resolve the connect identifier specified [dblink#5 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1440]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10468]
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sptsta251_SM1_00 on host sptsta251 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Mon Aug 17 14:39:33 2009
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10688
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 724]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 5160) [dpnttool.c 327]Hi Rishi Abrol
Thank you so much for your reply.
Actualy i am doing database export - import from windows to AIX but i am separating the databse only not CI, SCS.
I have install/import the databse on AIX and i have change the setting on configtool ,i can see its reading the new database.
But still its killing the work process ABAP+JAVA.
What i have done on CI (Windows):-
1.I have copy the new database : tnsnames.ora, sqlnet.ora to \usr\sap\SID\SYS\profile\oracle
2. I have change these parameter to E:\usr\sap\SM1\SYS\profile\DEFAULT.PFL
SAPDBHOST = databse hostname
j2ee/dbtype = ora
j2ee/dbname = sid
j2ee/dbhost = databse hostname
3. I have copy the new securestore to \usr\sap\SID\SYS\global\security\data
4. i have change the databse setting in config tool
Edited by: Post Solman on Aug 17, 2009 3:44 PM -
Hi,
My sap is running on ecc6.0,linux with maxdb(abap+javastack) we are taking backup through database manager in tape.while restoring it will ask any java files.
ThankuHi
Thanks alot for ur quick response.
If I want to follow SAP System copy(export/import) procedure using sapinst tool , I need to shut it down the SAP instance , which is not possible everyday.
Is there any way out to take backup of ABAP+JAVA stack to tape and restore in another machine using last sucessfull backup using backup/restore procedure(Database Manager).
How can I take backup of ABAP+JAVA stack without shuting down the SAP Instance by using any sap standard tools (sapinst) and can be used to restore in any new machine in case of emergency?
ThankU -
Hi all,
I did a client copy in ECC IDES with client 800 as source client.As per the logs , copy is successful.The profile usedf is SAP_ALL.After the copy we logged into the new client which was
created and it looked good. Checked the Logs in SCC3 and it said that client copy was finished sucessfully.However now when we go and execute transactions MM01 and VA01, it is giving a error saying
Batch definition level not found.System inconsistency!
Not sure what went wrong, Any suggestions would be Helpful.
Regards,
Chaitanya.hi...
send the full details of ur client copy....
what is ur target client where u did this client copy .. i mean in prod dev -
Problems in Dialog instance installation for ECC6.0(ABAP+JAVA)
Does anyone can help me what should be a procedure of installing Dialog instance for ECC 6.0 with both ABAP + Java Stacks.
When installing app server do we also choose ABAP and Java or just ABAP. Installation manual does not cover this and when we run the sapinst we have following problem:
<u>The following are the activities that I have done as pre-reqs on the standby on the server that is to host dialog instance</u>
I have mounted the following file systems on ddrsap02. Created the local filesystem /usr/sap/DSP/D00 and NFS mounted the others
/dev/appsaph 5505024 5503856 1% 5 1% /usr/sap/DSP/D00 <b>(is this required or SAPINST should create it itself)</b>
ddrsap00:/stage 419430400 149761708 65% 90835 1% /stage
dprsap01:/sapmnt/DSP 4718592 2888416 39% 12790 2% /sapmnt/DSP
ddrsap12:/usr/sap/trans 2752512 1084932 61% 5107 3% /usr/sap/trans
Then when I run the sapinst from ddrsap02 to install the DI I get the following error
ddrsap02[/tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI]#vi sapinst_dev.log
"sapinst_dev.log" 20516 lines, 641048 characters
TRACE
Running with toplevel file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI/toplevel.xml
Running with dialog file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI/dialog.xml
Running with keydb file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI/keydb.xml
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_exe.397528.1170221882.
Opened iaejs701.o
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI.
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_exe.397528.1170221882.
Opened iacdlib701.o
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI.
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_exe.397528.1170221882.
Opened iaccdlib.o
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI.
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_exe.397528.1170221882.
Opened iapasswdman701.o
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI.
This is SAPinst, version 701, make variant 700_REL, build 817256
compiled on Mar 14 2006, 23:39:26
TRACE [syxxsyshlp.cpp:175]
syslib::logSystemState()
Process environment
===================
Environment Variables
=====================
_ = /tmp/sapinst_exe.397528.1170221882/sapinstexe
SAPINST_EXE_DIR = /tmp/sapinst_exe.397528.1170221882
LANG = en_US
LOGIN = root
PATH = /usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin:/usr/java14_64/jre/bin:/usr/java14_64/bin
SAPINST_EXEDIR_CD = /stage/51031797/IM_AIX_PPC64/.
LC__FASTMSG = true
WINDOWID = 8388621
"sapinst_dev.log" 20516 lines, 641048 characters
EJS_Installer::writeTraceToLogBook()
2007-01-31 09:42:48.898 NWDB.getDBHost() done: undefined
<i><b>ERROR 2007-01-31 09:42:48 [iaxxinscbk.cpp:271]
abortInstallation
CJS-00030 Assertion failed: in getSidFromProfiles: Variable dbHost should be defined</b></i>
TRACE [iaxxejsbas.hpp:388]
handleException<ESAPinstException>()
Converting exception into JS Exception Exception.
ERROR 2007-01-31 09:42:48
CJSlibModule::writeError_impl()
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
TRACE [iaxxejsbas.hpp:460]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2007-01-31 09:42:48
FCO-00011 The step assertDBInfo with step key |NW_DI|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|1|0|assertDBInfo was executed with status ERROR .
<html><head></head><body><p>An error occurred while processing service <b>SAP ERP 2005 Support Release 1 > SAP Systems > Oracle > High-Availability System > Base
d on AS ABAP and AS Java > Dialog Instance</b>. You may now</p><ul> <li>press <I>Retry</I> to repeat the current step.</li> <li>press the <I>View Log</I> button
to get more information about the error.</li> <li>stop the task and continue with it later.</li></ul><p>Log files are written to <b>/tmp/sapinst_instdir/ERP/SYST
EM/ORA/HA/ABAPJAVA/DI</b>.</p></body></html>
TRACE [iaxxgenimp.cpp:1093]
showDialog()
waiting for an answer from gui
Am I missing some pre-reqs or variable definitions?
I was going through the documentation and it says that /sapmnt/DSP/exe should be a local filesystem for a DI on a separate server. Will this create a problem ?
Also they talk about starting sapinst with the variable SAPINST_USE_HOSTNAME set to ddrsap02. I have tried this also
We are also not 100% sure about the settings for parameters:
rdisp/mssserv
rdisp/mssserv_internal
Accorss Devault Instance and Services Instance profile.
When we define it as per installation GUIDE (Abap+Java page 64) we get the popup message in SAPINST:
<b><html>Profile parameter <em>rdisp/msserv_internal</em> is not set for instance DVEBMGS01/DSP on host dprsap01.<p>You have to set the parameter in the default profile and restart the instance.<p>For further information refer to SAP Note 821875.</html></b>
Other errors follow shortly.
Any help would be appreciatedHi ,
are you able to resolve this error :Profile parameter rdisp/msserv_internal is not set for instance DVEBMGS01/DSP on host dprsap01.
You have to set the parameter in the default profile and restart the instance.
For further information refer to SAP Note 821875.</html>
? if yes , pls let me know , I am stuck with same issue while installing dialog instance .
Thanks
Hamendra -
Abap+java stack, users not mapping to portal role.
We have the ABAP+java add-on install.
The UME is by default ABAP engine.
From Portal:
1 I create a portal user, it ALWAYS creates ABAP user in ABAP stack of WAS.
2. I create a portal role, it creates a role in the Portal.
3. When I assign the user this portal role,
having worksets and pages,
I get no pages or worksets shown in the portal page as soon
user logs in.
Can you help configure this so that I could see the pages and iviews inside this workset when user logs in.
Thanks a lot.
PS: posted this in webdynpro-ABAP. no reply came. Sorry to double post.Hi Mike,
can you check into your WorkSet (or Pages) if you have setting up the <b>Entry Point</b> flag?
PS: Award points for good answers.
Best regards,
Gianluca Barile
Maybe you are looking for
-
Our family has an iPad, a MacBook Air, 2 iPhones, and 2 iPod touches. I tried to access music in iTunes on my MacBook Air and a message came up that said you can only have 5 devices use the same iTunes account. What can I do to allow us to all use th
-
I am a Java Developer and new to database. Database Table: Table 'Authors' with fields 'Author'(Varchar2), 'Code'(Varchar2), 'Id'(Varchar2 ~ Not a primary key, multiple records can have same value) and 'Date_Sequence'(Number). The possible values for
-
Inbound delivery without PO reference - How to create?
How can we create an Inbound delivery without referencing a PO?
-
XY graph: write an error
Hello, I wish to write a character like an "x" or a null character (like a empity space) when my VI generate a read error. How can I do? Thanks
-
Is it possible to know the %TEMP% environment variable from my program?
I would like to know if my program want to save a file to the temp storage on my PC, how can I know the %TEMP% environment variable in Windows in my program?