ABAP Mapping dumps while using trace

Hi everybody,
I am using the trace object as exposed in
http://help.sap.com/saphelp_nw04/helpdata/en/ba/e18b1a0fc14f1faf884ae50cece51b/content.htm
trace->trace( level = '1'
message = l_trace ).
But I get a dump 'NULL' Objectreference.
Whats wrong?
Thanks Regards
Mario

Hi Progirl,
as trace is a parameter of the method mapping~execute, I wonder why I have to create the trace object?
a) Could you explain, why I have to create it?
b) could you give the sample code, how to create it?
Thanks
Regards
Mario

Similar Messages

Classification System CA-CL: Problems / Dumps while using a new class type

Hi All,
You'd really make my day by helping me out w. hints or even a solution. Would reward points for your efforts...
The problem: in order to develop a class hierachy of product groups (in industry system, Rel. 6.40) I created a new class type (let's call it ZWG).
While doing so R/3 requsted me to provide info on the objects to assign to this class type as well as the transaction for displaying these objects. For Product Groups (material classes) this is object-table T023 and transaction WG24.
Furthermore the sys demands the implementation of a function module. This module's task is to check the existence of a given object as well as the locking and later unlocking in the process of classifying objects. Following SAP's naming convention I implemented and activated FM OBJECT_CHECK_T023.
After that I created a new class (FIRST_CLASS) of class-type ZWG.
I managed to assign exactly one (1) prod-grp to this class but afterwards I only receive dumps while using transactions CL20N, CL24N to assign objects.
The Message from ST22 says:
Assignment error: Overwriting a protected field.
Error in ABAP application program.
The current ABAP program "SAPLCLCV" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Do I have to debug throughout thís enormous amount of coding now? :-(((
Hope someone get's my "message in a bottle"
Best Regards
Udo

Yatin please see attached for warning.I am trying to create Z class using 001

Short Dump while using BAPI_PS_PRECOMMIT to set Project Definition Status

Hi All,
I am getting a short dump while using BAPI_PS_PRECOMMIT for setting the Project Definition status..
The requirement is to create a Project Definition and then set its status to REL from CRTD. For this purpose i am using the BAPI's in the following sequence :
1. BAPI_PS_INITIALIZATION
2. BAPI_PROJECT_MAINTAIN
3. BAPI_BUS2001_SET_STATUS
4. BAPI_PS_PRECOMMIT
5. BAPI_TRANSACTION_COMMIT
The Proj Def creation is happening successfully in step2. Interestingly, when I debug the program and stop at PRECOMMIT BAPI the program does not give a dump. I have also tried to give COMMIT WORK / WAIT FOR n SECONDS after BAPI_BUS2001_SET_STATUS, to give BAPI sometime for DB update but nothing seems to be a permanent solution.
Please give your views on a solution for this problem..
Thanks & Regards,
Somil

Can you please check how to post code in SDN ...
I cannot read your code properly

How To Guide on ABAP mapping (How to Use ABAP-Mapping in XI 3.0).

Hi,
I am looking for this document: How To Guide on ABAP mapping (How to Use ABAP-Mapping in XI 3.0), and not able to find it.
Can anybody please point me the location, to look for, or post the document.
Thanks,
Namadev

Hi Namadev Chillal ,
These r the links containing PDF docs which u r looking for:
how to create a flat file out of an IDoc-XML by means of an ABAP mapping program and the J2EE File Adapter.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
Excellent PDF Document on Mapping
http://help.sap.com/bp_bpmv130/Documentation/Operation/MappingXI30.pdf
Mapping Development with the ABAP Workbench
http://help.sap.com/saphelp_nw04/helpdata/en/10/5abb2d9df242f6a62e22e027a6c382/content.htm
ABAP Mappings
http://help.sap.com/saphelp_nw04/helpdata/en/ba/e18b1a0fc14f1faf884ae50cece51b/content.htm

Strange Dump while using HR_INFOTYPE_OPERATION.

Hi frnz,
I am facing dump while using the FM 'HR_INFOTYPE_OPERATION' as below. If I swap positions of w_p0041-endda and w_p0041-begda it does not give a dump but error msg is generated saying that no selection in the period(as obviously dates are in propper range). Whlie testing the FM in SE37 with the same data, it works fine. Please help me find the problem.
data: TCLAS like PSPAR-TCLAS,
 OPERATION like PSPAR-ACTIO,
 infty like PRELP-INFTY.
 infty = '0041'.
 OPERATION = 'MOD'.
 TCLAS = 'A'.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
 EXPORTING
 INFTY = infty
 NUMBER = w_p0041-pernr
SUBTYPE =
OBJECTID =
LOCKINDICATOR =
 VALIDITYEND = w_p0041-endda
 VALIDITYBEGIN = w_p0041-begda
RECORDNUMBER =
 RECORD = w_p0041
 OPERATION = OPERATION
 TCLAS = TCLAS
DIALOG_MODE = '0'
 NOCOMMIT = SPACE
VIEW_IDENTIFIER =
SECONDARY_RECORD =
 IMPORTING
 RETURN = Return
KEY =

Hi all ,
I have already tried converting date to internal format, the data types are also fine. I am not able to paste the screen shot so here is a part of it. Please help.
************DUMP************************************
If we can not remap we would like to just re-raise the
exception like below like "RAISE EXCEPTION exception.".
Unfortunately the kernel will then forget about the
original source position.
So this is the fallback strategy. Calling this method
is only allowed if the exception can be resolved. Since
this is not the case we indicate a parameter violation.
RAISE EXCEPTION TYPE cx_hrpa_invalid_parameter
 EXPORTING
 previous = exception
 parameter = 'EXCEPTION'.
ENDMETHOD.
********************END**************
Thanks
Sachin

Short dumps while using J3A9 & VK12

We are implementing SAP ECC 6.0 and are experiencing short dumps while using transactions J3A9 and VK12. They all point to program /AFS/SD_DISP_CONDITION_TABLE and related Includes. I haven't found any information regarding this program on this site or in OSS, mostly due to the fact that the program is only 2 months old, which is troubling enough...
If anyone is experiencing similar issues, please feel free to respond. I have opened an OSS note with SAP and they are having trouble recreating the issue as it doesn't happen consistently.
Thanks and best regards,
Chris Mowl

We are implementing SAP ECC 6.0 and are experiencing short dumps while using transactions J3A9 and VK12. They all point to program /AFS/SD_DISP_CONDITION_TABLE and related Includes. I haven't found any information regarding this program on this site or in OSS, mostly due to the fact that the program is only 2 months old, which is troubling enough...
If anyone is experiencing similar issues, please feel free to respond. I have opened an OSS note with SAP and they are having trouble recreating the issue as it doesn't happen consistently.
Thanks and best regards,
Chris Mowl
10/22/08: Several OSS notes have been created regarding this issue but none of them have solved it. The two most recent notes are 1262962 & 1225190. If you are having this problem. start with these notes.

ABAP Dump while using "Upload from clipboard"

Hi,
We are facing ABAP dump when using "upload from clipboard" funciton without any data on the clipboard.
"Upload data" is working fine if some data exists on the clipboard. If in case of no data on the clipboard, it is leading to an ABAP dump.
Appreciate if anyone could point some OSS note or any solution if you've already faced this issue.
This is happening in our BW system with SAP_BASIS "SAPKB62018" and SAP_ABA "SAPKA62018".
Same thing happens in our BW test systems which are upgraded to the latest support pack.
Following is the error analysis
Error analysis
A RAISE statement in the program "CL_GUI_FRONTEND_SERVICES======CP " raised the
exception
condition "CNTL_ERROR".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"RAISE_EXCEPTION" C
"CL_GUI_FRONTEND_SERVICES======CP " or "CL_GUI_FRONTEND_SERVICES======CM00T "
"CLIPBOARD_IMPORT"

Hi,
When you say 'We are facing ABAP dump when using "upload from clipboard" funciton without any data on the clipboard.', are you using this in a custom program and are you running your custom program in the background?
From the error you mentioned, to me it looks like you had a control error and controls are for foreground, online process and not suitable for background processing. Same argument holds good for most of the enjoy SAP transactions when you try to do BDC, they will give you a similar error if you hit the piece of code where controls are used.
Controls are created on the desktop of the user and in background this is not possible.
Please let me know if this is the reason.
Srinivas

Short dump while using BAPI_PO_CREATE1

Hi all,
I am facing this short dump while executing my program that uses BAPI_PO_CREATE1.
The error is 'Exception condition "failure" raised'.
The trigger location of runtime error is
Program : CL_HANDLE_MANAGER_MM====================CP
Include: CL_HANDLE_MANAGER_MM=====================CM005
Module name: GET
Source code:
Method GET.
If my_manager is initial.
 Call method get_manager.
endif.
call method my_manager-> search EXporting im_id = im_id
 Importing ex_handle = ex_handle
 Exceptions failure = 01.
If sy-subrc <>0.
raise failure.
endif.
I am a beginner in ABAP. Plz help.

Hi ,
I faced the similar situation once , in my case when i passed the Delivery indicator value in the Item Table as well as Itemx Table , i was facing this error .
what i suggest you is to pass it at the Item table only , not at the itemx Table.
it worked for me .
try this and reply for the same.

Getting Dump while using PYXX_READ_PAYROLL_RESULT FM

I m trying to get the gross salary and ESI contribution amount for an indian based employee. While using the FM 'PYXX_READ_PAYROLL_RESULT' i m getting the following dump.
************************************************************************************************************************************************************An exception occurred that is explained in detail below.The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', wa not caught in procedure "PYXX_READ_PAYROLL_RESULT" "(FUNCTION)", nor was it propagated by RAISING clause.Since the caller of the procedure could not have anticipated that the exception would occur, the current program is terminated. The reason for the exception is:
Call to FORM "IMPORT_RESULT" is incorrect:
The actual parameter no. 2 has a different data type in the
PERFORM than requested for the FORM "IMPORT_RESULT" in program %_T06K40".
and it is showing the dump result here
ELSE.
 PERFORM import_client_spec IN PROGRAM (subroutine_pool-name)
 USING client
 key
 payroll_result
 import_subrc
 pcl2_version_number
 typepool_version_number
 IF FOUND.
Pls help me to solve the issue as it very high priroty work

Hi Faisal,
Before the FM the Sy-Subrc is zero only and i have declared the exception part also..
IF sy-subrc = 0.
CALL FUNCTION 'PYXX_READ_PAYROLL_RESULT'
 EXPORTING
 clusterid = 'IN'
 employeenumber = P0001-pernr
 sequencenumber = it_rgdir-seqnr
 filter_cumulations = ''
 CHANGING
 payroll_result = it_payresult
 EXCEPTIONS
 illegal_isocode_or_clusterid = 1
 error_generating_import = 2
 import_mismatch_error = 3
 subpool_dir_full = 4
 no_read_authority = 5
 no_record_found = 6
 versions_do_not_match = 7
 error_reading_archive = 8
 error_reading_relid = 9
 OTHERS = 10.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Endif.
Thanks!

Sql error dump while using pfcg tcode.

hi,
I am getting one dump while executing PFCG tcode. Hereunder i am pasting the log,
Runtime Errors DBIF_RSQL_SQL_ERROR
Exception CX_SY_OPEN_SQL_DB
Database error text........: "ORA-01115: IO error reading block from fil
(block # 52025)#ORA-01110: data file 9:
'/oracle/OPL/sapdata2/sr3_6/sr3.data6'#ORA-27091: unable to queue
I/O#ORA-27072: File I/O error#HPUX-ia64 Error: 5: I/O error#Additional
information: 3#Additional inform"
Internal call code.........: "[RSQL/FTCH/AGR_FLAGS ]"
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
"SAPLPRGN_START3" or "LPRGN_START3U33"
"PRGN_START3_LOAD_FLAGS"
Soon help will be appreciated.
regards

Hello,
Take a look at note 546006 - point 6
Thanks

CONVT_CODEPAGE : Abap Dump while using Transfer statment

Hi,
I am getting an abap dumb CONVT_CODEPAGE when the program is executed.
It is encountered at the Transfer statement.
The file is opened in legacy text mode.
So i assume come characters in the file are not being interpretated using the existing system codepage,thus the dump.
Pls let me know if my analysis is incorrect.
Can anyone provide me with a workaround ?
Answers will be rewarded.
- Rohan

Hi Rohan
Check these notes :
Note 547308 - Shortdump CONVT_CODEPAGE when displaying measure
Note 752835 - Usage of the file interfaces in Unicode systems
Note 1057289 - Reasons for CX_SY_CONVERSION_CODEPAGE / CONVT_CODEPAGE
Note 853665 - LSMW: Dump occurs when file imported from application server

Dump; while using LSMW with RFBIBL00.

Hi,
I am using Standard Batch/direct input method.
Ending up with a dump with the following error message:
The reason for the exception is:
The program attempted to interpret the value "/" as a number, but
since the value contravenes the rules for correct number formats,
this was not possible.
    IF BBKPF-PROPMANO(1)                 NE NODATA.
     CLEAR: FTPOST-FNAM, FTPOST-FVAL.
      FTPOST-FNAM = 'BKPF-PROPMANO                    '.
      FTPOST-FVAL = BBKPF-PROPMANO                   .
    APPEND FTPOST.
   ENDIF.
215    >>>   IF BBKPF-VATDATE(1)                  NE NODATA.
      CLEAR: FTPOST-FNAM, FTPOST-FVAL.
      FTPOST-FNAM = 'BKPF-VATDATE                     '.
       FTPOST-FVAL = BBKPF-VATDATE                    .
       APPEND FTPOST.
   ENDIF.
ENDFORM.
This code is a part of include program RFBIBL02.
While i am testing the same project in the sandbox system, it's working fine, as the condition
"IF BBKPF-VATDATE(1) NE NODATA"
is not there in the program RFBIBL02 (in sandbox system) .
Is there any way to bypass this condition or any other way to get it resolved?
Please suggest me a relevant solution.
Thanks.

Hi ,
If u r not passing any value to the date field then no data value will be taken as '/'.
As date field cannot be given as '/' u r getting the dump.
Please clear the date field if there is no data. u can give the following piece of code in mapping section of that date field.
If not aritems-vatdate is initial.
bbkpf-vatdate = aritems-vatdate.
else.
clear bbkpf-vatdate.
endif.
this will clear the '/' value if there is no data in date field.
Reward points if useful.
Asif

Short dump while using FM "BAPI_GOODSMVT_CREATE" in background

Hi Sir,
I am using the FM "BAPI_GOODSMVT_CREATE" to create the Goods movement. While running the program through a job in background, article docu is generated successfully,,but at the same time it gives short dump in ST22.
Short text
Exception condition "CNTL_ERROR" raised.
A RAISE statement in the program "CL_GUI_CUSTOM_CONTAINER=======CP" raised the
exception
condition "CNTL_ERROR".
Since the exception was not intercepted by a superior
program, processing was terminated.
Please tell me what can be the possible reason for the same and how to avoid the same?
Warm regards
Krishan

There's at least one note addressing this. You should be able to find it quite easily.
Rob

Dumps while using output types

Hi,
We are to create a PO by giving a output type ZPO2 in the sales order. For this we have configured in NACE the ZPO2 output type with medium as 8 (special function). In NACE we have given the Z program name and the form name (Perform in the Z program).
Now when we give the output type in the sales order and then while debugging we find that the Z program and the form given in NACE is called.
But however when we check the sales order again in TCode VA02 there is a popup mentioning that the update was terminated. In ST22 there are 2 dumps.
1) One with the error DYNPRO_SEND_IN_BACKGROUND and the description in the dump is
The current ABAP program "RSNAST00" had to be terminated because one of the statements could not be executed.
The termination occurred in line 910 of the source code of the (Include) program "RSNAST00"
2) The other dump mentions Too many parameters specified with PERFORM.
In a subroutine call, there were more parameters than in the routine definition.
Error in ABAP application program.
The current ABAP program "RSNAST00" had to be terminated because one of the statements could not be executed.
The termination occurred in line 910 of the source code of the (Include) program "RSNAST00"
In both the cases the termination occurs on:
NAST = TEMP_NAST
Please help me understand what is wrong and how can it be rectified.
Thanks
Mick

Hi Mick James,
About First Error..
Check out there is an Enhancement Point there in program RSNAST00
ENHANCEMENT-POINT OBJEKT_SPERREN SPOTS ES_RSNAST00 STATIC
Check the code in this Enhancement Point...
You must be executing some objects or FMs etc which can not be run in Background because it require SAP GUI
And another You must be passing more parameters in Subroutine while calling it ... Check out the defination of Subroutine and number of parameters you are passing...
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7
ilesh Nandaniya

Mapping issues while using MapwithDefault Node function for Idoc

Hi Experts,
We are facing issues while trying to generate nodes at reciver side even though it does not exist at sender side.
we are using the matmas05 and we want the nodes E1marcm and e1mardm to generated at target structure.
the structure is like this
Matmas05
idoc
E1maram
segment
 E1marcm
 segment
 msgfn
 .....other fields
 E1mardm (can be many segments)
 segment
 lgort
 ..other fields
 E1mpgdm
 segment
 ...e1mpgdm fields
the mapping has been done like:
e1marcm -mapwithdefault-e1marcm
constant -segment
werks-mapwithdefault-werks
other fields(one to one mapping)
e1mardm-mapwith default-e1mardm
lgort-mapwithdefault(value 1000)-lgort
other fields -one to one mapping
now the problem we are facing is when e1mardm is not existing in source structure the values from the other node of e1mardm(which exists) are getting overwritten into it.
we want only the lgort to be 1000 and the segment should populate at target side.
like
e1mardm
segment
lgort value 1000
Could you please assist in solving this issue and give your valuable suggestions as how could we handle it.
Thanks and regards,
jyoti

U will achieve this using UDF function. Map the below Like.
e1mardm-mapwith default(Value Constant)-e1mardm
 lgort (A) ---
e1mardm-mapwith default(Value Exit)u2014(EqualsS) (B)- (UDF1)- lgort
 Constant(Value Exit)---
 Constant(Value 1000)(C)---
Other one to one mapping fields also you should use one more UDF.
 Other one to one fields (A) ---
e1mardm-mapwith default(Value Exit)u2014(EqualsS) (B) - (UDF2)- Target
 Constant(Value Exit)---
UDF1:
Argument A,B,C and select queue.
 //write your code here
int j = 0;
for(int i=0;i<a.length;i++)
if (b[j].equals("true"))
result.addValue(c[0]);
i--;
result.addValue(ResultList.CC);
else
result.addValue(a);
j++;
UDF2:
 Argument A,B and select queue.
 //write your code here
int j = 0;
for(int i=0;i<a.length;i++)
if (b[j].equals("true"))
i--;
result.addValue(ResultList.CC);
else
result.addValue(a);
j++;

ABAP Mapping dumps while using trace

Similar Messages

Maybe you are looking for