Sql error dump while using pfcg tcode.
hi,
I am getting one dump while executing PFCG tcode. Hereunder i am pasting the log,
Runtime Errors DBIF_RSQL_SQL_ERROR
Exception CX_SY_OPEN_SQL_DB
Database error text........: "ORA-01115: IO error reading block from fil
(block # 52025)#ORA-01110: data file 9:
'/oracle/OPL/sapdata2/sr3_6/sr3.data6'#ORA-27091: unable to queue
I/O#ORA-27072: File I/O error#HPUX-ia64 Error: 5: I/O error#Additional
information: 3#Additional inform"
Internal call code.........: "[RSQL/FTCH/AGR_FLAGS ]"
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
"SAPLPRGN_START3" or "LPRGN_START3U33"
"PRGN_START3_LOAD_FLAGS"
Soon help will be appreciated.
regards
Hello,
Take a look at note 546006 - point 6
Thanks
Similar Messages
-
Getting error msg while using SFP tcode to use intaractive ADOBE forms
Hi All,
I wanna make use of Adobe intractive forms in one application. when i use transaction SFP and click on the layout tab i get following error message.
Could not start Layout Designer (see long text)
Message no. FPUIFB086
Diagnosis
The forms design tool for developing the form layout could not be started; either it is not installed or there are errors in the installation.
Procedure
Make sure that you have the forms design tool installed on your desktop (the tool is part of the SAPGUI installation).
Also read SAP Note 801524.
I looked for the same issue on SDN and someone resolved it after installing 'SAP JAVA Stack'. I raised an AHD for the same but CCD guyz say that there is nothing like that.
Can anyone suggest solution for this if you have faced same issue.
Thanks!Check the port numbers 8888 is allowed by default to Oracle WebCenter Spaces
http://docs.oracle.com/cd/E14571_01/core.1111/e10105/portnums.htm#ASADM432
don't know exaclty how you can change the port, maybe in config files
see this thread :
{message:id=4446974}
Regards
Jean-Yves
Edited by: JeanYves Bernier on 15 déc. 2012 00:20 -
Hello,
Last week we began seeing some timeout errors, but today there have been much more of them and I’m not sure how to proceed in troubleshooting.
We have 2 load balanced app servers:
Windows Server 2008 R2 (virtualized)
ColdFusion 8, Enterprise
And a database server:
Windows Server 2008 R2
SQL 2012
The error in “coldfusion-out.log” is:
A non-SQL error occurred while requesting a connection from <DSN>.
Timed out trying to establish connection
This only happens on one of the web servers, but it happens more frequently when the app servers is under a heavier load. Most of the day it works fine, but 4 or 5 times throughout the day we will have 1 – 15 requests timeout in a row(always varies), and then things will be fine again w/out restarting or doing anything.
The database server is much more powerful than the app server, and I don't believe the issue involves long running queries or the DB server being under heavy load.
I’m a DBA who is temporarily handling System Admin responsibilities, and I’m not sure how to further trouble shoot this. I just started some pings going from the app server to the database using IP and the listeners name. How else can I prepare for the next time it happens. What other logs should I be looking at to gain some insight? Are there PerfMon counters I could use to help troubleshoot?
Thanks for your help!I've had several timeout since the pings were started. Got a some response times > 1ms (nothing greater than 7 or 8ms), but no timeouts.
-
ABAP dump while running the tcode MIGO
Hi All,
I am getting the abap dump while running the tcode MIGO when I searched I got two relevant sap notes but our functional team said that its not applicable in our case.
Please find the details of ST22 analysis-:
Runtime Errors MESSAGE_TYPE_X
Date and Time 17.04.2009 13:18:45
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
No RFC destination is defined for SAP Global Trade Services
Long text of error message:
Technical information about the message:
Message class....... "/SAPSLL/PLUGINR3"
Number.............. 002
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"SAPLMBWL" or "LMBWLU21"
"MB_POST_GOODS_MOVEMENT"
SAP Notes i have reffered 1098491, 1041122
Currently we are running on SAP_APPL 600 0007 SAPKH60007
Regards,
PrashantHi Rohit,
This particular note is valid for
Support
Packages Release Package
Name
PI 2004_1_46B SAPKIPZI38
PI 2004_1_46C SAPKIPZI48
PI 2004_1_470 SAPKIPZI58
PI 2004_1_500 SAPKIPZI68
Our system is running on PI_BASIS 2006_1_700 0005 SAPKIPYM05
Pls suggest.
Regards,
Prashant -
Strange Dump while using HR_INFOTYPE_OPERATION.
Hi frnz,
I am facing dump while using the FM 'HR_INFOTYPE_OPERATION' as below. <b>If I swap positions of w_p0041-endda and w_p0041-begda it does not give a dump but error msg is generated saying that no selection in the period(as obviously dates are in propper range).</b> <u>Whlie testing the FM in SE37 with the same data, it works fine.</u> Please help me find the problem.
data: TCLAS like PSPAR-TCLAS,
OPERATION like PSPAR-ACTIO,
infty like PRELP-INFTY.
infty = '0041'.
OPERATION = 'MOD'.
TCLAS = 'A'.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
INFTY = infty
NUMBER = w_p0041-pernr
SUBTYPE =
OBJECTID =
LOCKINDICATOR =
VALIDITYEND = w_p0041-endda
VALIDITYBEGIN = w_p0041-begda
RECORDNUMBER =
RECORD = w_p0041
OPERATION = OPERATION
TCLAS = TCLAS
DIALOG_MODE = '0'
NOCOMMIT = SPACE
VIEW_IDENTIFIER =
SECONDARY_RECORD =
IMPORTING
RETURN = Return
KEY =Hi all ,
I have already tried converting date to internal format, the data types are also fine. I am not able to paste the screen shot so here is a part of it. Please help.
************DUMP************************************
If we can not remap we would like to just re-raise the
exception like below like "RAISE EXCEPTION exception.".
Unfortunately the kernel will then forget about the
original source position.
So this is the fallback strategy. Calling this method
is only allowed if the exception can be resolved. Since
this is not the case we indicate a parameter violation.
RAISE EXCEPTION TYPE cx_hrpa_invalid_parameter
EXPORTING
previous = exception
parameter = 'EXCEPTION'.
ENDMETHOD.
********************END**************
Thanks
Sachin -
Classification System CA-CL: Problems / Dumps while using a new class type
Hi All,
You'd really make my day by helping me out w. hints or even a solution. Would reward points for your efforts...
The problem: in order to develop a class hierachy of product groups (in industry system, Rel. 6.40) I created a new class type (let's call it ZWG).
While doing so R/3 requsted me to provide info on the objects to assign to this class type as well as the transaction for displaying these objects. For Product Groups (material classes) this is object-table T023 and transaction WG24.
Furthermore the sys demands the implementation of a function module. This module's task is to check the existence of a given object as well as the locking and later unlocking in the process of classifying objects. Following SAP's naming convention I implemented and activated FM OBJECT_CHECK_T023.
After that I created a new class (FIRST_CLASS) of class-type ZWG.
I managed to assign exactly one (1) prod-grp to this class but afterwards I only receive dumps while using transactions CL20N, CL24N to assign objects.
The Message from ST22 says:
Assignment error: Overwriting a protected field.
Error in ABAP application program.
The current ABAP program "SAPLCLCV" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Do I have to debug throughout thís enormous amount of coding now? :-(((
Hope someone get's my "message in a bottle"
Best Regards
UdoYatin please see attached for warning.I am trying to create Z class using 001
-
Short Dump while using BAPI_PS_PRECOMMIT to set Project Definition Status
Hi All,
I am getting a short dump while using BAPI_PS_PRECOMMIT for setting the Project Definition status..
The requirement is to create a Project Definition and then set its status to REL from CRTD. For this purpose i am using the BAPI's in the following sequence :
1. BAPI_PS_INITIALIZATION
2. BAPI_PROJECT_MAINTAIN
3. BAPI_BUS2001_SET_STATUS
4. BAPI_PS_PRECOMMIT
5. BAPI_TRANSACTION_COMMIT
The Proj Def creation is happening successfully in step2. Interestingly, when I debug the program and stop at PRECOMMIT BAPI the program does not give a dump. I have also tried to give COMMIT WORK / WAIT FOR n SECONDS after BAPI_BUS2001_SET_STATUS, to give BAPI sometime for DB update but nothing seems to be a permanent solution.
Please give your views on a solution for this problem..
Thanks & Regards,
SomilCan you please check how to post code in SDN ...
I cannot read your code properly -
System error message while using maps check in
today i got a lot of system error messages while using maps check in feature, and i tried everything from factory default to reinstalling mobile software and formating everything and yet nothing changed idk what to do and i use the maps application a lot of times so i need this problem fixed please
am using Nokia 500 btwtoday i got a lot of system error messages while using maps check in feature, and i tried everything from factory default to reinstalling mobile software and formating everything and yet nothing changed idk what to do and i use the maps application a lot of times so i need this problem fixed please
am using Nokia 500 btw -
I have two forests with a transitive on-way trust between them: PROD -> TEST (test trusts PROD). I had previously had kerberos authentication working with winrm from PROD to machines in TEST. I have verified the trust is healthy, I also verified users
in TEST can use WINRM with kerberos just fine. Users from PROD cannot connect via kerberos to machines in TEST with winrm.
I have verified the service has registered the appropriate SPNs. I ran dcdiag against all my PROD and TEST domain controllers and didn't find anything that would prevent kerberos from happening. I even tried disabling the firewall entirely on my TEST dcs
but that didn't gain me anything.
I've enabled kerberos logging but only see the expected errors such as it couldn't find a PROD SPN for the machine, which it shouldn't from what I understand, it should go to the TEST domain and find the SPN from there.
I'm really out of next steps before I call PSS and hope someone here has run into this and could provide me some next steps.
PowerShell Error:
Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (:) [], PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionStateBroken
winrs Error:
Winrs error:
WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config.Hi Adam,
I'm a little unclear about which SPNs you were looking for, in which case could you confirm you were checking that on the computer object belonging to the actual destination host it has the following SPNs registered?
WSMAN/<NetBIOS name>
WSMAN/<FQDN>
If you were actually trying to use WinRM to connect to the remote forest's domain controllers, then what you said makes sense, but I was caught between assuming this was the case or you meant another member server in that remote forest.
Also, from the client trying to connect to this remote server, are you able to telnet to port 5985? (If you've used something other than the default, try that port)
If you can't, then you've got something else like a firewall (be that the Windows firewall on the destination or a hardware firewall somewhere in between) blocking you at the port level, or the listener on the remote box just isn't working as expected. I
just replied to your other winrm post with steps for checking the latter, so I won't repeat myself here.
If you can telnet to it and the SPNs exist, then you might be up against something called selective authentication which has to do with how the trust was defined. You can have a read of
this to learn a bit more about selective trusts and whether or not it's affecting you.
Cheers,
Lain -
Error 7 Windows error 14001 while using iTunes on my windows XP, please help
Error 7 Windows error 14001 while using iTunes on my windows XP, please help
Hello Zaza2006,
Thanks for the question, and welcome to Apple Support Communities.
The following article outlines the exact error message you provided, and steps that may lead to a potential resolution:
iTunes for Windows: "Error 7" message when opening iTunes
http://support.apple.com/kb/TS3074
Thanks,
Matt M. -
Short dumps while using J3A9 & VK12
We are implementing SAP ECC 6.0 and are experiencing short dumps while using transactions J3A9 and VK12. They all point to program /AFS/SD_DISP_CONDITION_TABLE and related Includes. I haven't found any information regarding this program on this site or in OSS, mostly due to the fact that the program is only 2 months old, which is troubling enough...
If anyone is experiencing similar issues, please feel free to respond. I have opened an OSS note with SAP and they are having trouble recreating the issue as it doesn't happen consistently.
Thanks and best regards,
Chris MowlWe are implementing SAP ECC 6.0 and are experiencing short dumps while using transactions J3A9 and VK12. They all point to program /AFS/SD_DISP_CONDITION_TABLE and related Includes. I haven't found any information regarding this program on this site or in OSS, mostly due to the fact that the program is only 2 months old, which is troubling enough...
If anyone is experiencing similar issues, please feel free to respond. I have opened an OSS note with SAP and they are having trouble recreating the issue as it doesn't happen consistently.
Thanks and best regards,
Chris Mowl
10/22/08: Several OSS notes have been created regarding this issue but none of them have solved it. The two most recent notes are 1262962 & 1225190. If you are having this problem. start with these notes. -
Error msg while using i pod touch on bose sounddock
i got an error msg while using my ipod touch on a bose sound dock... it is still working fine it just said error not comatible with i pod touch, was this just a little second glitch, everything is still working fine dock is brand new, is there anything i should be aware of?
Have you contacted Bose/went to their support site?
You can try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
Runtime error ASSIGN_TYPE_ILLEGAL_CAST while using ASSIGN key word
Hi All,
I'm getting a runtime error ASSIGN_TYPE_ILLEGAL_CAST while using ASSIGN keyword in the below statement,
ASSIGN L_XVALUE(L_LENGTH) TO <TEXTLINE> TYPE 'C'. "see 581444
Here L_XVALUE is of type X with value 'ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S' , L_LENGTH is of type I with value 51 and <TEXTLINE> is of type C wih one character length .
Should I have to declare <TEXTLINE> as same as that of L_XVALUE ( type X ).
Thanks in Advance,
Sabu.Decalre <TEXTLINE> as type any.
-
Short dump while using BAPI_PO_CREATE1
Hi all,
I am facing this short dump while executing my program that uses BAPI_PO_CREATE1.
The error is 'Exception condition "failure" raised'.
The trigger location of runtime error is
Program : CL_HANDLE_MANAGER_MM====================CP
Include: CL_HANDLE_MANAGER_MM=====================CM005
Module name: GET
Source code:
Method GET.
If my_manager is initial.
Call method get_manager.
endif.
call method my_manager-> search EXporting im_id = im_id
Importing ex_handle = ex_handle
Exceptions failure = 01.
If sy-subrc <>0.
raise failure.
endif.
I am a beginner in ABAP. Plz help.Hi ,
I faced the similar situation once , in my case when i passed the Delivery indicator value in the Item Table as well as Itemx Table , i was facing this error .
what i suggest you is to pass it at the Item table only , not at the itemx Table.
it worked for me .
try this and reply for the same. -
The sql error:25153 while executing the ListCube
Hi All,
I have loaded data successfully in to my cube it is showing success in RSMO, but while executing the list cube of fieldselection for output with char' it is giving error like " sql error:25153 "
. But when i chose only key figures it is showing the data. What could be the problem .Please reply needs urgently.
Thanks one & All in advance.If your underlying RDBMS for BW is Oracle, this error message number is thrown for when an attempt is being made to use space in a temporary tablespace that has no datafiles defined. This could be that there truly are no datafiles defined or it could be that the default temporary tablespace isn't set to a valid temporary tablespace.
You will need to have access to your RDBMS in order to resolve this yourself. If not, then have your DBA or Basis person resolve it
Maybe you are looking for
-
Declaring an internal table in smartform
hi, can anyone tell how to declare internal table in smartform. the internal table contains fields from 2 or more data dictionary tables(eg.kna1 and adrc). after this from the print program(internal table containing data in print progr
-
I just recently purchased a MacBook Pro (13 inch with Retina display), an iPad Air 2, and an iPhone 6 plus. Before these purchases, I was using a Windows 7 laptop to manage my iTunes library and iTunes purchases. I am in need of syncing my iTunes l
-
Gateway Monitor with a Mac PowerPC G4?
I have been given a Gateway monitor (model fpd2275W) and was wondering if this is even compatible with my Mac? Is there a way of making it compatible? Right now all I'm getting is "no signal" when I hook it up. Message was edited by: Tiamar
-
Dear all, I am facing with some critical scenario ,we can share our views in this forum.... My Client is expecting one order...(He knows 101% he will get it ) so ,he will start to working on Procrument and production , it's a MTO order ...by that gen
-
Lost control of dvd drive / problem w bootcamp & windows xp
I have been running Windows XP in my bootcamp partition (and via Parallels) and now have this problem: my machine does not see my dvd drive, although mechanically, it still works; on start up it spins up, it shifts back and forth, and makes all the n