ABAP Proxy Class - GET_BUSINESS_SYSTEM_ERROR

I am using ABAP proxy in R/3 to send data to third party system thro' XI. In our development XI it works fine but in our QA-R/3 I am getting error "An error occurred when determining the business system (NO_BUSINESS_SYSTEM)".
Does anyone has any idea where should I look to resolve this error. This program worked fine before few days in our QA-R/3 system also.
Thanks in advance.
Mrudula

Hi,
Run transaction SLDCHECK. If it throws up errors, check the transaction SLDAPICUST, and also the RFC destinations for the integration server in sm59.
Also, it would't hurt to check the business system settings in the SLD.
It could also be a user authorisation error.
Cheers
Manish

Similar Messages

How can I call a ABAP proxy class from BADI? PLease help

hi Experts,
    I have a scenario where I have to call a ABAP proxy class from a BADI. How can I do this? Does anybody has sample code for the same?
Please help.
Thanks
Gopal

Hi,
   You can call a method of a class from BADI. Here are the steps.
   1) In the BADI implementation create a object for the proxy class.
   2) Call the Execute_Synchronous method.
    You can define a BADI by using SE18 and you can implement it by using SE19.
Sample code...
================================================
METHOD ZIF_EX_VBADI~CONVERTUPPER.
DATA: OBJ TYPE REF TO ZTESTCLASS.
DATA: IT_DATA TYPE ZIN_MT,
            IT_RES   TYPE ZOUT_MT,
            SEXCEPTION TYPE REF TO CX_AI_SYSTEM_FAULT.
TRY.
      CREATE OBJECT OBJ
         EXPORTING
             LOGICAL_PORT_NAME = 'TESTPORT'.
CATCH CX_AI_SYSTEM_FAULT INTO SEXCEPTION.
ENDTRY.
ENDMETHOD.
================================================
Thanks,
Vivek LR

How to use CL_PROXY_BASIS instead of CL_PROXY_CLIENT your ABAP Proxy class?

Hello experts,
I have a scenario where a new basis release was done in my development and testing SAP boxes (Basis Release 710 I believe) which means from then on when generating an ABAP Proxy class the inheriting class will be used is CL_PROXY_CLIENT as opposed to the previous CL_PROXY_BASIS.
This causes a problem though because the target date for the project, which uses this ABAP proxy, is supposed to be in the production system before the date when the basis release will be done in the production system. Obviously this will cause delays in my project since if I were to move my objects to production before the basis release a dump/syntax error will occur in production because the class CL_PROXY_CLIENT is not expected be production yet.
The next plan is to try to use CL_PROXY_BASIS instead of CL_PROXY_CLIENT, by editing my ABAP Proxy Class be force. My question is, what steps do I need to take so that I can change these classes so CL_PROXY_BASIS will be referenced/used instead of CL_PROXY_CLIENT ?
I hope to hear from all of you soon.
Regards

>
Rich Heilman wrote:
> Bad idea. Your dev and prod boxes should be at the same basis level at all times.
>
Which release and SP level are you still on?

ABAP proxy class - data structure

I generated a ABAP Proxy Class and the data structure I want to use is put automatically under item structure which has 0...unbounded type.
1. How can I get rid of this item structure as it will create another unnecessary level for my mapping
2. If my source structure has only 3 level, and the target structure has more than 3 (including item), how to map it?
e.g.
Source structure: Level 1(occurrence 1) > Level 2(1)> Level 3(0..1)
Target structure: Level 1(1])--> Level 2(0...1) --> item (0..unbounded) ---> Level 4(0..1)
I need to map level 3 from my source to level 4 in target, but it didn't seem to work.
Thanks.

--->1. How can I get rid of this item structure as it will create another unnecessary level for my mapping
You can delete the proxy at Application Server.....make necessary changes at XI Message Interface and again generate the proxy...
-->Source structure: Level 1(occurrence 1) > Level 2(1)> Level 3(0..1)
Target structure: Level 1(1])--> Level 2(0...1) --> item (0..unbounded) ---> Level 4(0..1)
For this you need to make use of context change features of XI Mapping.
Regards,

How to call a ABAP proxy class from a BADI? Please help!

hi Experts,
    I have a scenario where I have to call a ABAP proxy class from a BADI. How can I do this? Does anybody has sample code for the same?
Please help.
Thanks
Gopal

Hi Gopal,
Check this out
DATA: ref_obj    TYPE REF TO zmfg_production_ord.----> BADI
* Instantiate the proxy class
    CREATE OBJECT ref_obj.
    TRY.
        CALL METHOD ref_obj->execute_asynchronous
          EXPORTING
            output = it_output.     "Output Structure
        COMMIT WORK.
      CATCH cx_ai_system_fault INTO ref_sysexception.
    ENDTRY.
    IF ref_sysexception IS INITIAL.
      WRITE : / 'Error Message'.
    ENDIF.
Edited by: Raj on May 28, 2008 4:52 PM

Recursion in abap proxy class

Hi experts.
I create an abap proxy class via SE80, because we won't use XI. After import a local WSDL file, I generated the proxy class. But my problem is I can't active it. I see there are many errors in warings tab, they are 'Item is part of recursion'. Any one knows how to solve these problem?

Hi,
Kindly inspect wsdl and you will find data type which is referring to itself. Such recursion in my knowledge not yet supported. Possible workaround is to download wsdl and modify tags to remove recursive effect (may be create a copy of tag give another name and then refer it as data type).
Regards,
gourav

Error no. SPRX084 when create a ABAP proxy class

Hy Guys,
I create a Web Services on Axis and Tomcat machine, it's in document/literal Style format.
When I try to import WSDL to create an ABAP proxy class, Proxy class generator, returm me an error number SPRX084 having said me that the message, in part TAG on element Attribute, uses a wrong or inexistent element.
I've the same case from "http://www.thomas-bayer.com/axis2/services/BLZService?wsdl".
There's a solution?
Best Regards,
Antonello

i tried with this wsdl (http://www.thomas-bayer.com/axis2/services/BLZService?wsdl) and dont get the error you are mentioning.

Soapfaultcode:1 Error when consuming webservice through abap proxy class

Hi All,
I am facing a issue executing a proxy class created by consuming web service.
I have consumed a web service which queries data from oracle server to process them in SAP.We have created a Proxy class and did the following configurations:
1) Created a logical port using SOAMANAGER
2) In SICF t-code we have selected No proxy setting for local server.
But when we execute the proxy class it gives an error as "SoapFaultCode:1'.
Regards,
Madhu.

Hi Madhu,
Please tel us how u have solved it. I am also facing this problem.
I am trying to understand this problem description 'SOAP ACTION name by definition of the logical port.' via the thread Re: Get error "SoapFaultCode:1"Consume web service in ABAP proxy - But couldn't able to understand how to do this.
Thank You,
Regards,
Naresh.

Outbound abap proxy class

Hi,
I previously succeeded in importing a standard software component for e-recruitment into PI. I was then able to associate this with my own software component in the SLD and create datatype enhancements for the standard SWC in my SWC.
After that I was able to re-generate a standard proxy class in the e-recruitment system to contain my datatype enhancements.
I did this a while back and now I have some additional datatype enhancements I want to do and then re-generate the proxy class.
Here the problem is: When I try to do this again, I get prompted for a SSCR key for the standard class.
Any suggestions? I was previously able to do the datatype enhancements without any SSCR key needed.
Thanks,
Dan

hi
You might be trying to change some standard sap objects thats why sscr key is required.
you can refer to SAP Note 33154 for sscr details.
re: sap notes and sscr
Re: how to get the access key
regards,
ujjwal kumar

ABAP Proxy error : GET_BUSINESS_SYSTEM_ERROR

Hi All,
I am working on Proxy to File Scenario. In this, while executing a proxy program in Sender system I get the following error:
- <CX_AI_SYSTEM_FAULT>
<CODECONTEXT>Local</CODECONTEXT>
<CODE>GET_BUSINESS_SYSTEM_ERROR</CODE>
<ERRORTEXT>An error occurred when determining the business system (LD_ERROR)</ERRORTEXT>
<LANGUAGE />
</CX_AI_SYSTEM_FAULT>
</cls:CX_AI_SYSTEM_FAULT>
Can anybody please guide me on this.
Thanks,
Chandravadan

Hi Sudharshan,
>>> First check the RFC Destination SAPSLDAPI in ur application system and check if SLD of XI is running fine..
This RFC Destination in Application System is working & SLD of XI is running fine.
>>>Have u pointed to the SLD of XI in transaction SLDAPICUST of application system. It should point to XI SLD. Make sure that u give the host,port,user,password(XI's) correctly there.
It is pointing to SLD of XI & the user I am using is XIAPPLUSER.
>>>Check whether u are executing the proxy in the right client, which is configured as Business system in SLD of XI.
Yes, I am executing proxy in right client which I have defined in SLD as Business Syetem. I am using ECC 5.0 as Sender system.
>>>Also in SXMB_ADM of the application system, check if u have maintained a HTTP Destination to XI and it tests fine.
Yes, I have maintained HTTP destination in Application system & it is also working fine.
Thanks,
Chandravadan

Consume web service in ABAP proxy with SOAP header

Hi Thomas ,
I am trying to consume web service in ABAP . I have followed the procedure from one of your web blog <a href="/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap a Developer's Journal Part XIV - Consuming WebServices with ABAP</a> . (640 release).
I need to pass SOAP header along with SOAP body. As you mentioned I have used if_wsprotocol_ws_header interface to pass header but it is still failing.
Please see below code and please give some direction to fix the issue.
1.Create ABAP proxy for WSDL (http://ws.strikeiron.com/SwanandMokashi/StockQuotes?WSDL). It has created structures only for SOAP body.
2.Create Logical port
3.Create following program to call proxy
REPORT zproxy.
DATA: ref_stock TYPE REF TO zzco_stock_quotes_soap ,
 ws_header TYPE REF TO if_wsprotocol_ws_header,
 name TYPE string,
 namespace TYPE string.
TRY.
 CREATE OBJECT ref_stock
get WS_HEADER protocol
 ws_header ?= ref_stock->get_protocol('IF_WSPROTOCOL_WS_HEADER').
set somehow header as iXML-DOM tree
 DATA: ixml TYPE REF TO if_ixml,
 xml_document TYPE REF TO if_ixml_document,
 xml_root TYPE REF TO if_ixml_element,
 xml_element TYPE REF TO if_ixml_element,
 xml_node TYPE REF TO if_ixml_node.
 DATA l_xstring TYPE xstring.
 DATA l_string TYPE string.
 FIELD-SYMBOLS <fs_xstring> TYPE xstring.
Additional Header:
 CONCATENATE
'<soap:Header>'
'<s1:LicenseInfo xmlns:s1="http://ws.strikeiron.com">'
'<s1:RegisteredUser>'
'<s1:UserID>[email protected]</s1:UserID>'
'<s1:Password>aaaaaaaa</s1:Password>'
'</s1:RegisteredUser></s1:LicenseInfo>'
'</soap:Header>' INTO l_string.
convert to xstring
 l_xstring = cl_proxy_service=>cstring2xstring( l_string ).
 IF NOT l_string IS INITIAL.
 create iXML DOM document from XML xstring
 CALL FUNCTION 'SDIXML_XML_TO_DOM'
 EXPORTING
 xml = l_xstring
 IMPORTING
 document = xml_document
 EXCEPTIONS
 invalid_input = 1
 OTHERS = 2.
 IF sy-subrc = 0 AND NOT xml_document IS INITIAL.
 xml_root = xml_document->get_root_element( ).
 xml_element ?= xml_root->get_first_child( ).
 add header element by element to SOAP header
 WHILE NOT xml_element IS INITIAL.
 name = xml_element->get_name( ).
 namespace = 'http://swanandmokashi.com' . "xml_element->get_namespace_uri( ).
 IF NOT xml_element IS INITIAL.
 ENDIF.
 ws_header->set_request_header(
 name = name
 namespace = namespace
 dom = xml_element ).
 xml_element ?= xml_element->get_next( ).
 ENDWHILE.
 ENDIF.
 ENDIF.
CATCH cx_ai_system_fault .
ENDTRY.
*Call soap body using abap proxy class.
DATA: get_quotes TYPE zzget_quotes_soap_out .
DATA: get_quotes1 TYPE zzget_quotes_soap_in .
get_quotes1-quote_ticker = 'GE'.
TRY.
 CALL METHOD ref_stock->get_stock_quotes
 EXPORTING
 get_quotes1 = get_quotes1
 IMPORTING
 get_quotes = get_quotes.
CATCH cx_ai_system_fault .
CATCH cx_ai_application_fault .
ENDTRY.
4.It is throwing cx_ai_system_fault error.
SOAP details:
Input:
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:enc="http://schemas.xmlsoap.org/soap/encoding" >
<soap:Header>
<s1:LicenseInfo xmlns:s1="http://ws.strikeiron.com">
<s1:RegisteredUser>
<s1:UserID>[email protected]</s1:UserID>
<s1:Password>aaaaaaaa</s1:Password>
</s1:RegisteredUser>
</s1:LicenseInfo>
</soap:Header>
<soap:Body>
<tns:GetQuotes xmlns:tns="http://swanandmokashi.com">
<tns:QuoteTicker>GE</tns:QuoteTicker>
</tns:GetQuotes>
</soap:Body>
</soap:Envelope>
Thanks,
Kavitha.

Hi ,
Thank you for the response. Did you passed user email and password ([email protected] /aaaaaaaa) part of licenseinfo->resisteredUser along with Quoteticker GE in analyzer?
<a href="http://www.strikeiron.com/Analyzer/OnlineAnalyzer.aspx?WSDL=http://ws.strikeiron.com/SwanandMokashi/StockQuotes?WSDL">ANALYZER</a>
Thanks,
Kavitha.

ABAP proxy code using internal table

Hi XI guru's,
Good Afternoon,
My Scenario is ABAP Proxy to file using ztable.
i am getting data from Sap R/3 data base as Ztable. using this Ztable i have to write ABAP Proxy code. I generated ABAP Proxy and mentioned all below.Please send me ABAP Proxy code using this details. This is very urgent. Please help me.
ABAP proxy class:   zco_mioa_tata
structure              :   zmt_tata
structure                :   zdt_tata
structure                :   zdt_tata_employee
Table                :   zdt_tata_employee_tab
Ztable                :   zcnu_proxy_table
outbound structure:
mt_tata
    employee
thanks and regards
sai

Sai,
I guess this will help you.
1. Proxies can be a server proxy or client proxy. In our scenarios we require proxies to send or upload the data from/into SAP system.
2. One more thing proxies can be used if your WAS ≥ 6.2.
3. Use Tcode SPROXY into R/3 system for proxy use.
4. To send the data from R/3 system we use OUTBOUND PROXY. In Outbound proxy you will simply write an abap code to fetch the data from R/3 tables and then send it to XI. Below is the sample code to send the data from R/3 to XI.
REPORT zblog_abap_proxy.
DATA prxy TYPE REF TO zblogco_proxy_interface_ob.
CREATE OBJECT prxy.
DATA it TYPE zblogemp_profile_msg.
TRY.
it-emp_profile_msg-emp_name = 'Sarvesh'.
it-emp_profile_msg-empno = '01212'.
it-emp_profile_msg-DEPARTMENT_NAME = 'NetWeaver'.
CALL METHOD prxy->execute_asynchronous
EXPORTING
output = it.
commit work.
CATCH cx_ai_system_fault .
DATA fault TYPE REF TO cx_ai_system_fault .
CREATE OBJECT fault.
WRITE :/ fault->errortext.
ENDTRY.
Receiver adapter configurations should be done in the integration directory and the necessary sender/receiver binding should be appropriately configured. We need not do any sender adapter configurations as we are using proxies.
5. To receive data into R/3 system we use INBOUND PROXY. In this case data is picked up by XI and send it to R/3 system via XI adapter into proxy class. Inside the inbound proxy we careate an internal table to take the data from XI and then simply by using the ABAP code we update the data inot R/3 table. BAPI can also be used inside the proxy to update the data into r/3.
I hope this will clear few doubts in proxy.
Just go through these links:
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/frameset.htm
ABAP Server Proxies By Siva Maranani
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
/people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
File to R/3 via ABAP Proxy with good example
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
http://help.sap.com/saphelp_nw2004s/helpdata/en/48/d5a1fe5f317a4e8e35801ed2c88246/frameset.htm
Generating java proxies..
/people/prasad.ulagappan2/blog/2005/06/27/asynchronous-inbound-java-proxy
/people/rashmi.ramalingam2/blog/2005/06/25/an-illustration-of-java-server-proxy
Synchronous Proxies:
Outbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2boutbound%2bprogram%2b-%2bpurchase%2border%2bsend
Inbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2binbound%2bprogram%2b-%2bsales%2border%2bcreation
Regards,
Sarvesh

CALl Transaction Failing in ABAp Proxy

Hi All,
We are trying to CALL the VL02n Transaction in our ABAP Proxy Class Code. But the System is somehow not able to CALL The Transaction.
But if we create a BDC Session the session is getting created.
Any inputs as to why this is falling.
Regards,
Arunava

Hi there,
Arun and I are working on this issue together.
We have tried the Call Transaction with mode 'N', and it does not work. We get sy-subrc = 1,001 from the Call transaction statement. We we run it in Mode 'A', we get kicked out from the session completely. The user we are using to connect from XI to ECC has SAP_ALL, and is also a Dialog user.
Any help/ideas would be very well apprciated...
Regards,
Jawwad

Inbound synchronous ABAP proxy in PI 7.1?

Hi All,
Can anyone provide me sample ABAP proxy code for inbound synchronous. I have created inbound synchronous service interface, generated proxy in ABAP system. It has only one method in ABAP proxy class with input and output. When I write code ti take the input, process and send an output, its not getting delivered.
Please help me with sample code or guidence on this. Looks like there are changes in 7.1 when compared with previous versions that EXECUTE_SYNCHRONOUS doesn't exist anymore.Do we just eed to write code in single method with in the class?
Regards,
N@v!n

On Sproxy - >
Focus on your interface - >
go to your inbound interface name(service interface) -> double click
On PROPERTIES TAB -> INTERFACE -> PROVIDER CLASS -> DOUBLE CLICK ON IT ->
Now One method name is coming - > Double click on it ->
Congarts ! you will write your code Here ...
I am Pasting a sample code used in my case , similarly you can compare for your self. :
__________________________________________________________ Declare Area
DATA:   IT_INPUT    TYPE ZPROCESS_ORDER_FILE_ROW_TAB2,
              WA_INPUT    TYPE ZPROCESS_ORDER_FILE_ROW2.
DATA:   IT_FINAL   TYPE ZPROCESS_ORDER_RESPONSE_RO_TAB,
              WA_FINAL   TYPE ZPROCESS_ORDER_RESPONSE_ROW.
I get this Types from
go to your inbound interface name(service interface) -> double click
USED OBJECT TAB
Here you will get 2 table type Structure for Internal table Finaland Input Both.
as well as Work area Types.
_________________ Actual Code -
IT_INPUT = INPUT-PROCESS_ORDER_FILE-ROW.
This Structure you get in
go to your inbound interface name(service interface) -> double click
USED EXTRENAL VIEW TAB.
Use ABAP NAME HERE ..
Populate IT_FINAL according to you and pass it out.
SImialry for sending Out ....
OUTPUT-PROCESS_ORDER_RESPONSE-ROW = IT_FINAL.
Hope it help...
Still Doubts , Write here ...
Regards
Prabhat Sharma.

How to create a abap proxy in sproxy netweaver 7.01

sproxy of nw 7.01 is completely different from previous version.For example in prev. versions there is message interface (inbound) (outbound) ...
but in 7.01 , i cannot find how to create an abap proxy class , there is only display proxy in context menu in all segments.(like service interface)
how can i create proxy ?
thanks a lot

In help sap.con says that
Expand the Service Interfaces node.
Select the outbound service interface.
Open the context menu and choose Create.
but there is no outbound service interface under service interface node
what can i do?
thanks a lot..

ABAP Proxy Class - GET_BUSINESS_SYSTEM_ERROR

Similar Messages

Maybe you are looking for