Soapfaultcode:1 Error when consuming webservice through abap proxy class

Hi All,
I am facing a issue executing a proxy class created by consuming web service.
I have consumed a web service which queries data from oracle server to process them in SAP.We have created a Proxy class and did the following configurations:
1) Created a logical port using SOAMANAGER
2) In SICF t-code we have selected No proxy setting for local server.
But when we execute the proxy class it gives an error as "SoapFaultCode:1'.
Regards,
Madhu.

Hi Madhu,
Please tel us how u have solved it. I am also facing this problem.
I am trying to understand this problem description 'SOAP ACTION name by definition of the logical port.' via the thread Re: Get error "SoapFaultCode:1"Consume web service in ABAP proxy - But couldn't able to understand how to do this.
Thank You,
Regards,
Naresh.

Similar Messages

Error in consuming webservices using ABAP

Dear Gurus,
I am trying to consume webservices using ABAP. We dont have XI installed and no java instance installed.
I created a customer proxy through SE80 and generated a proxy class by giving a WSDL link and also defined logical port. Traditionally followed the steps. But while testing webservices , I get a ICF error.
The error is as follows:
SOAP : 1:023 SRT : Processing error in internet communication framework ("ICF error when recieving the response ICM_HTTP_CONNECTION_FAILED)
Please let me know the cause of this error and solution to be provided.
I also tried to call the method from an abap program, But I get CX_AI_SYSTEM_FAULT exception.
Awaiting your replies.
Thanks in advance for your support and valuable time.
Thanks
Gurushanthi

Hi Gurushanthi,
It could one of several problems, examples:
- A firewall setting
- http communication out disabled by Basis team or
- The logical port wasn't configured correctly.
Try the suggestions in this thread to narrow down the reason (particularly the telnet test from the server):
[Re: Error testing external web service ICM_HTTP_CONNECTION_FAILED;
Regards, Trevor

Error in Consuming Webservice in ABAP

Hello Experts,
I am very new to webservices in ABAP. just to test the webservice within ABAP, I created a Service Definition which gave me a WSDL URL using the Provider wizard. then I generated proxy class to consume the WSDL URL generated in previous step . I am calling the proxy class within a program as below. It is raising a exception CX_AI_SYSTEM_FAULT . Does anyone have idea what this could be and how to correct it?
   TRY.
              CALL METHOD TEST->ZTESSTHJKJH
                EXPORTING
                  INPUT = INPUT
                IMPORTING
                  OUTPUT = output
               CATCH CX_AI_SYSTEM_FAULT .
               CATCH CX_AI_APPLICATION_FAULT .
              ENDTRY.
Thanks,
Harkamal

Hi Harkamal,
It seems that the webservice provider and consumer are on the same server (loopback). It's probably releated with network access. You can follow SAP Note Number 1009109 (Analyzing Web service problems using the ICF recorder) to track down the sent and received soap messages . Alternatively, you can download and use "Webservice Studio", a small freeware program to test the webservice easily. Official website is: [http://webservicestudio.codeplex.com/]
Good luck,
Ozcan.

Error when Calling Transaction in ABAP Proxy

Hi All,
I'm trying to call a transaction in synchronous ABAP Proxy, but there's a CNTL_ERROR in the details of SXMB_MONI.
I've checked some threads related to this problem, but they're not solved yet.
Please advise, can I use "call transaction" in synchronous ABAP Proxy ? Is there any additional setting / code to prevent the error ?
Thanks in advance,
Andy S

Hi Stefan,
I'm trying to assign marketing attributes in our CRM Business Partner Transaction, which is triggered by messages sent from some 3rd party application.
Recently, I find out that this transaction (TCode BP) raise the same error (CNTL_ERROR) if run background from SM35. So the problem is not about calling transaction in ABAP Proxy, but due to the TCode BP itself.......
My ABAPER friend is trying to find the BAPI to replace this call transaction .........
Thanks a lot for your response........
Regards,
Andy S

Error when consuming WebService SOAP in DataService 4.2

Hi everybody,
I've a problem when I try to import the function in DataService 4.2 (the Data Service version is 14.2.1.224).
How you can see in the attachments file, I've created the DataStore WebServiceSoap with le right characteristics but when during the import i have the error.
I've tried to use the web service
https://po-cloud.com/POWebService/POService.asmx?wsdl
in SOAPUI and in Strike Iron Webservice Analyzer and everything works correctly.
Can anybody help me?
Thanks a lot
Simone

Yeah, I'm getting a similar exception here, but it's when I run a client application whose stubs have been generated by the clientgen ANT task. Seems to have something to do with processing the Faults in my WSDL. I've traced the NPE to this line of code in
weblogic.wsee.bind.internal.FormQualifiedHelper.getPropertyForElement:
String s1 = bynamebean.getName().getXmlName().getQName().getNamespaceURI();
bynamebean.getName().getXmlName().getQName() returns null.
BEA, is this problem innocuous, and if so, is there a way to get rid of the exception? It's very disconcerting.

Consuming Webservice in ABAP: SoapFaultCode:1

Hi,
I have created a webservice with NetweaverDeveloperStudio and deployed it to a J2EE. I tested it with the "NDS-Webservice-Tester" and it worked fine.
I then created a proxy following the section for WebAS 640 in the weblog of Thomas Jung:
/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap
When using the "test-interface" function in SE80 (also described in Thomas weblog) I get the following result:
<CX_AI_SYSTEM_FAULT>
<CODECONTEXT>http://www.sap.com/xml_errorcodes</CODECONTEXT>
<CODE>SoapFaultCode:1</CODE>
<ERRORTEXT>
000D6019F1DD004000000036000020D8000405473991B26F:
Found 0 operation definitions using keys:
Key name:'first-body-element-ns'
key value: 'urn:EdilogUserManagementWebserviceWsd/EdilogUserManagementWebserviceVi/document';
Key name:'SoapRequestWrapper'
key value:'getCompany';
</ERRORTEXT>
<LANGUAGE />
</CX_AI_SYSTEM_FAULT>
Any idea what might cause this error? Is there a list with the SoapErrorCodes and their specific meanings?
Thanks and regards
Jan Hempel

I solved the problem "accidentally": The name of the Webservice was to long! Changing the name from "EdilogUserManagementWebservice" to "UserManagement" did the trick.
This is probably due to the restricted fieldlength of ABAP-programnames.
Regards
Jan Hempel

Error no. SPRX084 when create a ABAP proxy class

Hy Guys,
I create a Web Services on Axis and Tomcat machine, it's in document/literal Style format.
When I try to import WSDL to create an ABAP proxy class, Proxy class generator, returm me an error number SPRX084 having said me that the message, in part TAG on element Attribute, uses a wrong or inexistent element.
I've the same case from "http://www.thomas-bayer.com/axis2/services/BLZService?wsdl".
There's a solution?
Best Regards,
Antonello

i tried with this wsdl (http://www.thomas-bayer.com/axis2/services/BLZService?wsdl) and dont get the error you are mentioning.

Getting Error :Error when instantiating WebService runtime

Hello All,
I am a new to Webservices and writing a test program .I am using the ECC 5.0 .I am calling a Webservice from R/3 .I am trying to call this webservice :[http://webservices.daehosting.com/services/isbnservice.wso?WSDL].
I am getting the following exception
{<?xml version="1.0" encoding="utf-8" ?>
- <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
- <asx:values>
<SYSTEMFAULT href="#o68" />
</asx:values>
- <asx:heap xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:abap="http://www.sap.com/abapxml/types/built-in" xmlns:cls="http://www.sap.com/abapxml/classes/global" xmlns:dic="http://www.sap.com/abapxml/types/dictionary">
- <cls:CX_AI_SYSTEM_FAULT id="o68">
- <CX_ROOT>
<TEXTID>F63AFF63DBE4BB4786A7F52CC4167145</TEXTID>
<PREVIOUS href="#o55" />
<KERNEL_ERRID />
- <INTERNAL_SOURCE_POS>
<PROGID>191</PROGID>
<CONTID>558</CONTID>
</INTERNAL_SOURCE_POS>
</CX_ROOT>
<CX_STATIC_CHECK />
- <CX_AI_SYSTEM_FAULT>
<CODECONTEXT>Local</CODECONTEXT>
<CODE>ERROR_WEBSERVICE_RUNTIME_INIT</CODE>
<ERRORTEXT>Error when instantiating WebService runtime (Error when initializing SOAP client application )</ERRORTEXT>
<LANGUAGE />
</CX_AI_SYSTEM_FAULT>
</cls:CX_AI_SYSTEM_FAULT>
- <cls:CX_XMS_SYSERR_PROXY id="o55">
- <CX_ROOT>
<TEXTID>3F829CAF9A45633CE10000000A155117</TEXTID>
<PREVIOUS />
<KERNEL_ERRID />
- <INTERNAL_SOURCE_POS>
<PROGID>0</PROGID>
<CONTID>0</CONTID>
</INTERNAL_SOURCE_POS>
</CX_ROOT>
<CX_STATIC_CHECK />
- <CX_XMS_SYSTEM_ERROR>
<ID>ERROR_WEBSERVICE_RUNTIME_INIT</ID>
<P1>Error when initializing SOAP client application</P1>
<P2 />
<P3 />
<P4 />
<INFO />
<CATEGORY>XIProxy</CATEGORY>
<AREA>ABAP</AREA>
<RETRY>M</RETRY>
</CX_XMS_SYSTEM_ERROR>
- <CX_XMS_SYSERR_PROXY>
<CO_AREA_ABAP>ABAP</CO_AREA_ABAP>
</CX_XMS_SYSERR_PROXY>
</cls:CX_XMS_SYSERR_PROXY>
</asx:heap>
</asx:abap>}
This is what i have given in LPCONFIG Tcode
LPCONFIG->General setting-> Call parameters->
URL->http://webservices.daehosting.com/services/isbnservice.wso?WSDL
Please help out what I am missing here
Thanks
Krishna

I had the same error, while implementing a new client webservice.
The Error ERROR_WEBSERVICE_RUNTIME_INIT was in my case solved by:
1. regenerating the CL_SOAP_APPLICATION_CLIENT class.
and
2. deleting the LPCONFIG setting and creating a new one.
Edwin.

Error when executing DBMS_ERRLOG through Stored Procedures...

Hi,
We have TWO schemas like IDWH_ODS and IDWH_ERR running on Oracle 10g Rel.2.
The schema IDWH_ERR has direct SELECT privilege on all the base tables in IDWH_ODS schema. (As Pl/sql doesn't support ROLE, we have granted direct SELECT on each of the tables)
IDWH_ODS schema has tables like ACCOUNT & CUSTOMER, for which I need to create DML Error logging tables in IDWH_ERR schema.
I have one procedure 'Cr_Errlog_Tabs' in IDWH_ERR schema which gets all tables in IDWH_ODS and creates Error logging table in IDWH_ERR schema using DBMS_ERRLOG package. My problem starts here,
When I execute the DBMS_ERRLOG package in IDWH_ERR through SQL*Plus LIKE,
> exec DBMS_ERRLOG.CREATE_ERROR_LOG('idwh_ods.ACCOUNT','ERR$_ACCOUNT','idwh_err');
it's creating the error log table 'ERR$_ACCOUNT' in IDWH_ERR schema.
(...the same will be working when execute through Anonymous plsql block)
BUT, when i execute the DBMS_ERRLOG package with same parameters through the stored Procedure 'Cr_Errlog_Tabs', it throws the following error...
ORA-01031: insufficient privileges
Please let me know how the solution at the earliest.

WHY DO YOU FEEL YOU HAVE TO START A NEW THREAD FOR YOUR PROBLEM!?
Insufficient priv error when executing DBMS_ERRLOG through PLSQL

Steps in BW for intigration with PI system through ABAP proxy communication.

Hello Experts,
Need your help.
We need to extract data from PI system through ABAP proxy communication. Kindly suggest the steps need to be perform on BW side.(from data source creation to setting up the delta queue )
Thanks,
Arpan

Hi Raja Sekhar,
Thanx for the quick reply.
If i have got you point right, you are telling me to right a program that will fetch the PO's and push the data into our Interface.
Let me explain you the complete scenario, we already have a ECC to SUS thrgh PI implemeted for the same PO's generated. Our requirement is that depending on the vendor details in PO's we have got to route the PO details to either SUS or BPM.
I had thought of writing a prgm but the abapers feel that a standard BADI for the same would lessen their efforts.
Meanwhile can you explain with a little more detail the standard approach you are referring to... probably some material relating to this would help us...
thanx a lot..
waiting for your reply,
Nandan

How to use CL_PROXY_BASIS instead of CL_PROXY_CLIENT your ABAP Proxy class?

Hello experts,
I have a scenario where a new basis release was done in my development and testing SAP boxes (Basis Release 710 I believe) which means from then on when generating an ABAP Proxy class the inheriting class will be used is CL_PROXY_CLIENT as opposed to the previous CL_PROXY_BASIS.
This causes a problem though because the target date for the project, which uses this ABAP proxy, is supposed to be in the production system before the date when the basis release will be done in the production system. Obviously this will cause delays in my project since if I were to move my objects to production before the basis release a dump/syntax error will occur in production because the class CL_PROXY_CLIENT is not expected be production yet.
The next plan is to try to use CL_PROXY_BASIS instead of CL_PROXY_CLIENT, by editing my ABAP Proxy Class be force. My question is, what steps do I need to take so that I can change these classes so CL_PROXY_BASIS will be referenced/used instead of CL_PROXY_CLIENT ?
I hope to hear from all of you soon.
Regards

>
Rich Heilman wrote:
> Bad idea. Your dev and prod boxes should be at the same basis level at all times.
>
Which release and SP level are you still on?

How to call a ABAP proxy class from a BADI? Please help!

hi Experts,
    I have a scenario where I have to call a ABAP proxy class from a BADI. How can I do this? Does anybody has sample code for the same?
Please help.
Thanks
Gopal

Hi Gopal,
Check this out
DATA: ref_obj    TYPE REF TO zmfg_production_ord.----> BADI
* Instantiate the proxy class
    CREATE OBJECT ref_obj.
    TRY.
        CALL METHOD ref_obj->execute_asynchronous
          EXPORTING
            output = it_output.     "Output Structure
        COMMIT WORK.
      CATCH cx_ai_system_fault INTO ref_sysexception.
    ENDTRY.
    IF ref_sysexception IS INITIAL.
      WRITE : / 'Error Message'.
    ENDIF.
Edited by: Raj on May 28, 2008 4:52 PM

Recursion in abap proxy class

Hi experts.
I create an abap proxy class via SE80, because we won't use XI. After import a local WSDL file, I generated the proxy class. But my problem is I can't active it. I see there are many errors in warings tab, they are 'Item is part of recursion'. Any one knows how to solve these problem?

Hi,
Kindly inspect wsdl and you will find data type which is referring to itself. Such recursion in my knowledge not yet supported. Possible workaround is to download wsdl and modify tags to remove recursive effect (may be create a copy of tag give another name and then refer it as data type).
Regards,
gourav

How can I call a ABAP proxy class from BADI? PLease help

hi Experts,
    I have a scenario where I have to call a ABAP proxy class from a BADI. How can I do this? Does anybody has sample code for the same?
Please help.
Thanks
Gopal

Hi,
   You can call a method of a class from BADI. Here are the steps.
   1) In the BADI implementation create a object for the proxy class.
   2) Call the Execute_Synchronous method.
    You can define a BADI by using SE18 and you can implement it by using SE19.
Sample code...
================================================
METHOD ZIF_EX_VBADI~CONVERTUPPER.
DATA: OBJ TYPE REF TO ZTESTCLASS.
DATA: IT_DATA TYPE ZIN_MT,
            IT_RES   TYPE ZOUT_MT,
            SEXCEPTION TYPE REF TO CX_AI_SYSTEM_FAULT.
TRY.
      CREATE OBJECT OBJ
         EXPORTING
             LOGICAL_PORT_NAME = 'TESTPORT'.
CATCH CX_AI_SYSTEM_FAULT INTO SEXCEPTION.
ENDTRY.
ENDMETHOD.
================================================
Thanks,
Vivek LR

ABAP proxy class - data structure

I generated a ABAP Proxy Class and the data structure I want to use is put automatically under item structure which has 0...unbounded type.
1. How can I get rid of this item structure as it will create another unnecessary level for my mapping
2. If my source structure has only 3 level, and the target structure has more than 3 (including item), how to map it?
e.g.
Source structure: Level 1(occurrence 1) > Level 2(1)> Level 3(0..1)
Target structure: Level 1(1])--> Level 2(0...1) --> item (0..unbounded) ---> Level 4(0..1)
I need to map level 3 from my source to level 4 in target, but it didn't seem to work.
Thanks.

--->1. How can I get rid of this item structure as it will create another unnecessary level for my mapping
You can delete the proxy at Application Server.....make necessary changes at XI Message Interface and again generate the proxy...
-->Source structure: Level 1(occurrence 1) > Level 2(1)> Level 3(0..1)
Target structure: Level 1(1])--> Level 2(0...1) --> item (0..unbounded) ---> Level 4(0..1)
For this you need to make use of context change features of XI Mapping.
Regards,

Soapfaultcode:1 Error when consuming webservice through abap proxy class

Similar Messages

Maybe you are looking for