ABAP Proxy error during runtime but success for manuall test ?
Hi,
I got scenario using inbound ABAP proxy. The problem is when i test the inbound proxy manually, it was sucessfully, but then if i run directly from sender got problem :
Error during proxy processing An exception with the type CX_SY_DYN_CALL_ILLEGAL_TYPE occurred, but was neither handled locally, nor declared in a RAISING clause The function call of ZPSCD_CTRACCOMOBJECT_CREA failed; a field may have been assigned to the parameter ZCOM_COMPDHDR whose type is not compatible with this parameter
Please help
Regards
Fernand,
As stated in the exception, there is a compatibility issue between source and target fields, but without further details (msg definitions etc), we can't tell you exactly what's wrong ...
What's the ABAP type of ZCOM_COMPDHDR field in your RFC function module ?
Rgds
Chris
PS : also check the msg content to make sure generated field is compatible with the expected type (manual test was successful because you set it to the suitable value, whereas in "real" situation there is discrepancy)
Edited by: Christophe PFERTZEL on Apr 28, 2008 1:22 PM
Similar Messages
-
Error message "ABAP/4 error during dynamic assign" on Contact Log creation.
Hi,
We are getting an error message "ABAP/4 error during dynamic assign beyond program bounds" displayed while creating contact log using transaction "BCT0".
Please suggest what can be the cause of the error message and how we can remove this.
Regards,
AnkurDear Andrea,
The problem should be caused by obsolete entry in table TFAWX.
Please use the following report for deleting this entry (test before in your TEST System) :
report ztfawx_delete.
tables tfawx.
select single * from tfawx where prog = 'SAPLBAS0'
and bldgr = '0110'
and mnum = 23
and bfeld = '$GENERAL'.
if sy-subrc = 0.
delete tfawx.
endif.
Buona Giornata
Mauro -
ABAP/4 error during dynamic assign beyond program bounds
Hi experts,
after an Upgrade from 4.7 to Ecc 6.0, launching transaction AC03 an error (green light) occours "ABAP/4 error during dynamic assign beyond program bounds".
Is there anyone who find a solution?
regards
andrea brescia
Edited by: andrea brescia on Nov 30, 2010 1:42 PMDear Andrea,
The problem should be caused by obsolete entry in table TFAWX.
Please use the following report for deleting this entry (test before in your TEST System) :
report ztfawx_delete.
tables tfawx.
select single * from tfawx where prog = 'SAPLBAS0'
and bldgr = '0110'
and mnum = 23
and bfeld = '$GENERAL'.
if sy-subrc = 0.
delete tfawx.
endif.
Buona Giornata
Mauro -
Error during Runtime: Mapping : RESOURCE_NOT_FOUND
<b>Hello everybody,
I get the following error during runtime while mapping:</b>
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Mapping der Request-Message
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING"><u><b>RESOURCE_NOT_FOUND</b></u></SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_FILE_REQUEST_2_RESPONSE_.class</SAP:P1>
<SAP:P2>http://mm_file_2_file</SAP:P2>
<SAP:P3>7c57acd0-19fa-11da-a907-fba1c22dd3ca</SAP:P3>
<SAP:P4>-1</SAP:P4>
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>The Resource com/sap/xi/tf/_MM_FILE_REQUEST_2_RESPONSE_.class (http://mm_file_2_file, 7c57acd0-19fa-11da-a907-fba1c22dd3ca, -1) could not be found.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
<b>Does anybody have an idea?
Thanks a lot
regards Mario</b>Could the reason be a wrong "file content convert"?
The payload:
<?xml version="1.0" encoding="utf-8" ?>
<ns:TEST.TXT xmlns:ns="http://mm_file_2_file">
<Record>
<Row>
<FirstName>Mario</FirstName>
<LastName>Mueller</LastName>
<City>Mannheim</City>
<Country>Deutschland</Country>
</Row>
</Record>
</ns:TEST.TXT>
Structure of corresponding Data-Type
Record 1..unbounded
Row 1
FirstName 1
LastName 1
City 1
Country 1
Regards Mario -
XML log: Error during temp file creation for LOB Objects
Hi All,
I got this exception in the concurrent log file:
[122010_100220171][][EXCEPTION] !!Error during temp file creation for LOB Objects
[122010_100220172][][EXCEPTION] java.io.FileNotFoundException: null/xdo-dt-lob-1292864540169.tmp (No such file or directory (errno:2))
at java.io.RandomAccessFile.open(Native Method)
at java.io.RandomAccessFile.<init>(RandomAccessFile.java:212)
at java.io.RandomAccessFile.<init>(RandomAccessFile.java:98)
at oracle.apps.xdo.dataengine.LOBList.initLOB(LOBList.java:39)
at oracle.apps.xdo.dataengine.LOBList.<init>(LOBList.java:30)
at oracle.apps.xdo.dataengine.XMLPGEN.updateMetaData(XMLPGEN.java:1051)
at oracle.apps.xdo.dataengine.XMLPGEN.processSQLDataSource(XMLPGEN.java:511)
at oracle.apps.xdo.dataengine.XMLPGEN.writeData(XMLPGEN.java:445)
at oracle.apps.xdo.dataengine.XMLPGEN.writeGroup(XMLPGEN.java:1121)
at oracle.apps.xdo.dataengine.XMLPGEN.writeGroup(XMLPGEN.java:1144)
at oracle.apps.xdo.dataengine.XMLPGEN.processSQLDataSource(XMLPGEN.java:558)
at oracle.apps.xdo.dataengine.XMLPGEN.writeData(XMLPGEN.java:445)
at oracle.apps.xdo.dataengine.XMLPGEN.writeGroupStructure(XMLPGEN.java:308)
at oracle.apps.xdo.dataengine.XMLPGEN.processData(XMLPGEN.java:273)
at oracle.apps.xdo.dataengine.XMLPGEN.processXML(XMLPGEN.java:215)
at oracle.apps.xdo.dataengine.XMLPGEN.writeXML(XMLPGEN.java:254)
at oracle.apps.xdo.dataengine.DataProcessor.processDataStructre(DataProcessor.java:390)
at oracle.apps.xdo.dataengine.DataProcessor.processData(DataProcessor.java:355)
at oracle.apps.xdo.oa.util.DataTemplate.processData(DataTemplate.java:348)
at oracle.apps.xdo.oa.cp.JCP4XDODataEngine.runProgram(JCP4XDODataEngine.java:293)
at oracle.apps.fnd.cp.request.Run.main(Run.java:161)
I have this query defined in my data template:
<![CDATA[
SELECT lt.long_text inv_comment
FROM apps.fnd_attached_docs_form_vl ad,
apps.fnd_documents_long_text lt
WHERE ad.media_id = lt.media_id
AND ad.category_description = 'Draft Invoice Comments'
AND ad.pk1_value = :project_id
AND ad.pk2_value = :draft_invoice_num
]]>
Issue: The inv_comment is not printing on the PDF output.
I had the temp directory defined under the Admin tab.
I'm guessing if it's the LONG datatype of the long_text field that's causing the issue.
Anybody knows how this can be fixed? any help or advice is appreciated.
Thanks.
SW
Edited by: user12152845 on Dec 20, 2010 11:48 AMHi All,
I got this exception in the concurrent log file:
[122010_100220171][][EXCEPTION] !!Error during temp file creation for LOB Objects
[122010_100220172][][EXCEPTION] java.io.FileNotFoundException: null/xdo-dt-lob-1292864540169.tmp (No such file or directory (errno:2))
at java.io.RandomAccessFile.open(Native Method)
at java.io.RandomAccessFile.<init>(RandomAccessFile.java:212)
at java.io.RandomAccessFile.<init>(RandomAccessFile.java:98)
at oracle.apps.xdo.dataengine.LOBList.initLOB(LOBList.java:39)
at oracle.apps.xdo.dataengine.LOBList.<init>(LOBList.java:30)
at oracle.apps.xdo.dataengine.XMLPGEN.updateMetaData(XMLPGEN.java:1051)
at oracle.apps.xdo.dataengine.XMLPGEN.processSQLDataSource(XMLPGEN.java:511)
at oracle.apps.xdo.dataengine.XMLPGEN.writeData(XMLPGEN.java:445)
at oracle.apps.xdo.dataengine.XMLPGEN.writeGroup(XMLPGEN.java:1121)
at oracle.apps.xdo.dataengine.XMLPGEN.writeGroup(XMLPGEN.java:1144)
at oracle.apps.xdo.dataengine.XMLPGEN.processSQLDataSource(XMLPGEN.java:558)
at oracle.apps.xdo.dataengine.XMLPGEN.writeData(XMLPGEN.java:445)
at oracle.apps.xdo.dataengine.XMLPGEN.writeGroupStructure(XMLPGEN.java:308)
at oracle.apps.xdo.dataengine.XMLPGEN.processData(XMLPGEN.java:273)
at oracle.apps.xdo.dataengine.XMLPGEN.processXML(XMLPGEN.java:215)
at oracle.apps.xdo.dataengine.XMLPGEN.writeXML(XMLPGEN.java:254)
at oracle.apps.xdo.dataengine.DataProcessor.processDataStructre(DataProcessor.java:390)
at oracle.apps.xdo.dataengine.DataProcessor.processData(DataProcessor.java:355)
at oracle.apps.xdo.oa.util.DataTemplate.processData(DataTemplate.java:348)
at oracle.apps.xdo.oa.cp.JCP4XDODataEngine.runProgram(JCP4XDODataEngine.java:293)
at oracle.apps.fnd.cp.request.Run.main(Run.java:161)
I have this query defined in my data template:
<![CDATA[
SELECT lt.long_text inv_comment
FROM apps.fnd_attached_docs_form_vl ad,
apps.fnd_documents_long_text lt
WHERE ad.media_id = lt.media_id
AND ad.category_description = 'Draft Invoice Comments'
AND ad.pk1_value = :project_id
AND ad.pk2_value = :draft_invoice_num
]]>
Issue: The inv_comment is not printing on the PDF output.
I had the temp directory defined under the Admin tab.
I'm guessing if it's the LONG datatype of the long_text field that's causing the issue.
Anybody knows how this can be fixed? any help or advice is appreciated.
Thanks.
SW
Edited by: user12152845 on Dec 20, 2010 11:48 AM -
[MESSAGE.GENERAL] How can take the actual error text for ABAP proxy error?
Hi...
I'm a ABAPer.
I got to create outbound abap proxy for synchronous server proxy and described below.
My problem is program can not catch the actual error message when occurred error during send data to XI.
The return message is just 'MESSAGE.GENERAL'.
But according to the XI part, 'Key error' is actual reason.
So... how can i take the actual error text like 'Key error'?
<b>* Only MESSAGE.GENERAL is return message for all kind of errors.</b>
Thanks.
Below----
TRY.
CREATE OBJECT abap_proxy.
CALL METHOD abap_proxy->execute_synchronous
EXPORTING
output = gs_out
IMPORTING
input = gs_in.
Exception Handling
<b> CATCH cx_ai_system_fault INTO go_sys_exception.
g_sys_result = go_sys_exception->get_text( ).</b>
CATCH cx_ai_application_fault INTO go_app_exception.
g_app_result = go_app_exception->get_text( ).
ENDTRY.
COMMIT WORK.
Return status 'D' is succeeded.
if gs_in-sales_group_rer_sap-xstat <> 'D'.
WRITE:/ 'System Error Message :', g_sys_result.
WRITE:/ 'Application Error Message :', g_app_result.
endif.
*--Result--
System Error Message : MESSAGE.GENERAL
Application Error Message :
Message was edited by: Miju cho
Message was edited by: Miju choThanks guys, this was useful.
My scenario is for Asynchronous communication.
I guess Fault messages are used in case of Synchronous communication for handling application errors. So if there was something wrong at the JDBC end then I could use the fault messages.
Have i got this right?
I also came across this piece on Acknowledgements. But is says that they can be used with the following Receivers:
The following receivers support acknowledgments:
ABAP and Java proxies (XI 3.0 SP1 for the latter)
Integration processes
IDocs (note that IDocs only return acknowledgments when they have been configured using the ALE audit)
Receiver adapters support system acknowledgments but not application acknowledgments
My Receiver is JDBC. So I guess I cannot use acknowledgements either.
Hence, I need to know what I can do to replicate the system errors eg. failed server etc...so that I can get catch these errors during sending.
I'll tell you abt what happened earlier.
My XI server was down. I executed the code for the sender ABAP Proxy and it did not catch the error. In SXMB_MONI in the R/3 system, I could see the messages queued up. When the XI server started, the messages were transferred to XI.
I need to handle such errors...ie. If the server is down or message did not reach XI then my ABAP program that sends data via ABAP proxy needs to know that something went wrong.
Thanks and Regards,
Ashwin -
Hi,
I have scenario like JDBC sender and file receiver.
I am able to poll with JDBC sender adapter and message has success in adapter engine.
but i am getting following error while mapping runtime.In sxmb_moni status error during mapping runtime.
Below i am giving the trace file:
<Trace level="1" type="T">Interface Mapping urn:iwaysoftware:adapter:iworacle:tablerequest jdbc_im</Trace>
<Trace level="1" type="T">RuntimeException during appliction Java mapping com/sap/xi/tf/_jdbc_mp_</Trace>
<Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:PO_HEADER/PO_HEADERS_INTERFACE/INTERFACE_HEADER_ID. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:303) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:63) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:77) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:94) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:67) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor414.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy153.processFunction(Unknown Source) at sun.reflect.GeneratedMethodAccessor413.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:219) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:169) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java:156) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:7650) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java:2275) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java:1614) at com.sap.mw.jco.JCO$Server.listen(JCO.java:8009) at com.sap.mw.jco.JCO$Server.work(JCO.java:8129) at com.sap.mw.jco.JCO$Server.loop(JCO.java:8076) at com.sap.mw.jco.JCO$Server.run(JCO.java:7992) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Root Cause: com.sap.aii.mappingtool.tf3.IllegalInstanceException: Cannot produce target element /ns0:PO_HEADER/PO_HEADERS_INTERFACE/INTERFACE_HEADER_ID. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:178) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:204) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:204) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:298) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:63) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:77) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:94) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:67) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor414.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy153.processFunction(Unknown Source) at sun.reflect.GeneratedMethodAccessor413.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:219) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:169) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java:156) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:7650) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java:2275) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java:1614) at com.sap.mw.jco.JCO$Server.listen(JCO.java:8009) at com.sap.mw.jco.JCO$Server.work(JCO.java:8129) at com.sap.mw.jco.JCO$Server.loop(JCO.java:8076) at com.sap.mw.jco.JCO$Server.run(JCO.java:7992) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)</Trace>
I tried with all options using mapping functions.But the same eror is coming.
When i tested my mapping program its successfully running in map bulider without any errors.
The error occuring at runtime.
Source strcture :
<?xml version="1.0" encoding="UTF-8"?>
<ns0:resultset xmlns:ns0="urn:iwaysoftware:adapter:iworacle:tablerequest">
<row>
<interface_header_id>928822</interface_header_id>
</row>
</ns0:resultset>
Target structure:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:PO_HEADER xmlns:ns0="urn:iwaysoftware:adapter:iworacle:tablerequest"><PO_HEADERS_INTERFACE><INTERFACE_HEADER_ID>928822</INTERFACE_HEADER_ID></PO_HEADERS_INTERFACE></ns0:PO_HEADER>
Can any body suggest what causing the problem.
Regards
UsmanHi Usman,
Test your mapping in IR with the payload from SXMB_MONI. You can refer michal's weblog on <a href="/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios to test your mapping (in real life scenarios)</a>
In other words you copy the XML message from monitoring and exectute the mapping in Integration Builder with maximal trace to get the reason.
So what you can do is check ur runtime payload in sxmb_moni with,
IR>message mapping>test tab>give values>test-->source xml
Also i thought i will give you some details on what ur doing, so maybe you can compare it with what uhave done and see where you have gone wrong.
A JDBC sender adapter has 2 essential fields,
1. SQL Statement
2. Update Statement
Your SQL statement will contain your SELECT statement and once your SQL statement is executed, UPDATE statement is executed. This is done so that records that have been selected by the SQL statement should not be selected again as the JDBC sender adapter will poll over the database for every poll interval.
If you want to SELECT something from your Database, then you will have to go for a JDBC sender adapter.
This is how a SENDER JDBC Adapter works,
When you are using your JDBC as a sender, then your JDBC will poll over your database and select the rows that satisfy your Select Query.
In your case, as you are dealing with multiple tables, you can write a stored proceudre for your Database, and call this stored procedure in your Sender JDBC adapter in the SELECT field of your JDBC adapter.
Go through this blog for stored procedures.
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
For Configuring the Sender JDBC Adapter refer go through <a href="http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm">Configuring the Sender JDBC Adapter</a>
Also go through this blog and see if it helps you.
/people/prasadbabu.nemalikanti3/blog/2006/02/27/collecting-and-bundling-vendor-records-from-different-multiple-interfaces-file-systempeoplesoft-and-sending-to-sap-r3-system-part-2
To access any Database from XI, you will have to install the corresponding Driver on your XI server.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
I hope this helps...
Regards,
Abhy
Message was edited by: Abhy Thomas -
Hi Experts,
My scenario R/3->XI(ABAP Proxy)--->SUS Systems
Getting the following error in SUS system.XI system it doesn't throw any error in moni.
I am new to proxy concepts.Also please let me know any related blogs or suggestions in this regards.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
<!-- Call Inbound Proxy
-->
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
<SAP:P1>UNCAUGHT_EXCEPTION</SAP:P1>
<SAP:P2>CL_BBPX1_SUSIV_IN</SAP:P2>
<SAP:P3>EXECUTE_ASYNCHRONOUS</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during proxy processing An exception with the type CX_BBPX1_STD_MESSAGE_FAULT occurred, but was neither handled locally, nor declared in a RAISING clause Application Error</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks,
SudhansuHi Behera,
Can you debug your proxy using this blog:
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/502a7f0e-e5d9-2910-5aa2-976a8ed8384f&overridelayout=true
Also please check few solutions given in this threads for the same issue:
Re: Messages waiting in SUS Moni
Re: ABAP Inbound Proxy Error !
Regards,
---Satish -
ABAP Proxy: Error calling Proxy
Hi guys,
Here I am with another amazing mistake.....
After searching the forum, reading some suggestions, notes, I'm a little bit lost on how to figure out what is wrong...
I've created a receiver ABAP Proxy. XI should call this proxy and receive the consequent response.....
I've tested the ABAP Proxy, everything is working fine...I've encountered some errors but was able to bypass them... But this one is getting hard...I've found one or two similar threads, or with the same error description but I had no luck in overcoming the error....
So, what is the problem....:
When XI is calling the ABAP Proxy I get:
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">EXCHANGE_PROFILE_ACCESS</SAP:Code>
<SAP:Stack>Error while reading exchange profile for system DEV and client 100</SAP:Stack>
I've searched the exchange profile but everything seems ok...
The user has all (and more) the authorizations needed....
Can you guys give me some hints? Or suggest any attempt....?Kumar,
as I said before, in SPROXY i can test the interface with no errors....
In the Application System the sldcheck returns no errors and the RFC Destinations return no errors on the connection tests...
I really can't understand what this problem might be...
Problem solved
What was it? Well, I'm really not sure...Like most of the threads related to this topic it's quite an awkward problem....I've tested some RFC connections which were created, changed some parameters, restarted the system and voila....
Thanks
Message was edited by:
Gonçalo Mouro Vaz -
ABAP Proxy connection Between PI and SRM for XMLs
Hello Experts,
We are trying to set up ABAP proxy connection between PI 7.1 and SRM so we can send XML from SRM into PI.
Our SRM developer is getting an SLD error (below) and seems like something is not set up right in the SLD. Could you help me out with any kind of blog/documention on setting up an ABAP proxy connection between PI and an ABAP system. Something that talks about what steps we need to take in PI and SRM.
error ...
*We saw the error during debugging. This error is preventing XML output
to be sent to PI.
BBP_BD 002 An SLD system has not been assigned to logical system
Thanks,
MayurThanks all for a quick reply. I also had to take following step to achieve the task.
adding the XI system to the SRM config - SRM Server -->
Technical basic Settings --> Define System Landscape? (also please
associated documentation in that link for XI)
Thanks,
Mayur -
FILE TO INBOUND ABAP PROXY - error
Hi,
Getting the following Error in FILE TO INBOUND ABAP PROXY which is updating a Database table in R/3.
Error:
com.sap.aii.utilxi.misc.api.BaseRuntimeException
thrown during application mapping
com/sap/xi/tf/_file2proxy_mm_: RuntimeException in
Message-Mapping transformatio~
How to rectify the error...
RaviHi,
The error mentioned is indicating about the Message Mapping error.
I think you need to test your Message Mapping with test tab.
Here Goto SXMB_Moni and select the related message and double click on it.
It will show you the various steps in Message flow.
Take the Inbound Message and look for Payload in it. Open it in right side window and right click on it to see source code.
Copy it in Message Mapping and test it
Thanks
swarup -
Client ABAP proxy error handling. Please help!
Hi Experts,
I have following scenario:
SAP ECC (ABAP Client Proxy) -> PI(XI)-->(SOAP) Third party web service System
This is Asynchronous.
What will happen when ABAP client Proxy in ECC sends data to PI but PI is down?
Will the message be queued in ECC? Can the queued message be processed automatically when PI is UP later?
Please help.
Thanks & Regards
GopalHello Gopal,
Correct, it should be an automatic entry into the queue!
refer below for a detailed understanding!
/people/arulraja.ma/blog/2006/08/18/xi-reliable-messaging-150-eoio-in-abap-proxies XI: Reliable Messaging u2013 EOIO in ABAP Proxies
/people/krishna.moorthyp/blog/2005/12/23/monitoring-for-processed-xml-messages-in-abap-proxy Monitoring for Processed XML messages in ABAP Proxy
Weblog to send Response from RFC to File in Asyn Mode Using Proxy [original link is broken] Weblog to send Response from RFC to File in Asyn Mode Using Proxy
/people/michal.krawczyk2/blog/2009/06/20/pixi-abap-proxies-say-goodbye-to-executeasynchronous-method PI/XI: ABAP Proxies say goodbye to Execute_Asynchronous method
/people/krishnakumar.ramamoorthy3/blog/2008/11/02/error-handling-framework-for-abap-proxies--part-1 Error handling framework for ABAP proxies - Part 1
/people/krishnakumar.ramamoorthy3/blog/2008/12/19/error-handling-framework-for-abap-proxies--part-2 Error handling framework for ABAP proxies - Part 2
Regards,
Jilan -
I am developing inbound ABAP proxy. Using fault message and raise exception, I can safely fail the ABAP proxy without blocking the queues.
If I want to configure ALERT message to be sent to a email id in this scenario, how do I achieve this? Can this be done using Alert configuration? or do we need to use BPM? IF BPM is the only alternative, can anybody indicate the BPM steps?Hi,
if you want to raise an alert from BPM
have a look at my weblog:
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
but if you want to send a mail from BPM
use mail adapter then you'll be able to
configure it very easily (even html mails):
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
- if you want you can also send mail from SAP
(when you catch the exception)
- you can also catch the excetpiton and
send the error to the XI and use the mail adapter from
there - without the BPM
there are many possibilities:)
Regards,
michal -
ABAP Proxy Error - Integration Builder address not maintained
I intend to use ABAP proxy between R/3 (ECC 6.0) and XI (PI 7.0).
On configuring the relevant connections, I run SPROXY and get the following error:
Integration Builder address is not maintained in the Exchange profile (Connections)
I have created the connx LCRSAPRFC & SAPSLDAPI from R/3 to PI but the connectivity does not work.
On running the reports
SPROX_CHECK_IFR_RESPONSE
SPROX_CHECK_HTTP_COMMUNICATION
SPROX_CHECK_IFR_ADDRESS
SPROX_CHECK_IFR_CONNECTION
My question is:
What is the Program to be used in LCRSAPRFC & SAPSLDAPI? I have used LCRSAPRFC_<sys id of XI server>
and SAPSLDAPI_<sys id of XI server>
Should the XI Integration Builder address be maintained in R/3?
If yes, is there any place where IB address can be maintained in R/3 (I believe there is no such thing as exchange profile in R/3. then how can IB address be maintained in R/3??...pls correct if I am wrong)
If IB address of XI has to be maintained in R/3 then can anyone pls tell me how to do it?Just recheck the steps with this and come up with doubts then
How do you activate ABAP Proxies?
Regards,
Prateek -
Column store errors during runtime
Hi,
I created a HANA instance in the trial landscape and directed my application to use the HANA instance schema. Over time, I get errors:
SAP DBTech JDBC: [2048]: column store error: search table error: [29] attribute not defined for physical index;internal error: attribute 'NEO_29J91OPIP2IAEWXFUZRHT093R:CA_EV_VENUEen/PK_EVENT_VENUE_ID' not found in indexInfoMap
I'm using the HANA instance instead of the default schema created from the application because I need to run spatial queries, which is currently only available in the HANA instance.
Does anyone know what's wrong?Additional errors from the HCP logs:
javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.5.0.v20130507-3faac2b): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: com.sap.db.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: [2048]: column store error: search table error: [10000008] exception 10000008:
ims_search_api/Delta/impl/DeserializerContext.cpp:2099
Failed to write data into NEO_95BOXA4K094KH5V4JNKE5KDPZ:CA_EV_VENUE$delta_1$en: Attribute engine failed(6900); $function$=writeDataIntoDelta
Error Code: 2048
Call: SELECT PK_EVENT_VENUE_ID, ADDRESS, DESCRIPTION, EMAIL, EXTERNAL_ID, FAX, LATITUDE, LONGITUDE, NAME, PHONE, WEBSITE, FK_EVENT_DATA_PROVIDER_ID FROM CA_EV_VENUE WHERE ((FK_EVENT_DATA_PROVIDER_ID = ?) AND (EXTERNAL_ID = ?))
bind => [2 parameters bound]
Query: ReadAllQuery(name="EventVenue.findByProvider" referenceClass=EventVenue sql="SELECT PK_EVENT_VENUE_ID, ADDRESS, DESCRIPTION, EMAIL, EXTERNAL_ID, FAX, LATITUDE, LONGITUDE, NAME, PHONE, WEBSITE, FK_EVENT_DATA_PROVIDER_ID FROM CA_EV_VENUE WHERE ((FK_EVENT_DATA_PROVIDER_ID = ?) AND (EXTERNAL_ID = ?))")
The table CA_EV_VENUE contains spatial column and only this table is "failing". Other tables doesn't contain spatial columns are fine.
I'm trying to get HANA DB traces from the HCP team and was wondering which traces will be helpful for the HANA team.
Maybe you are looking for
-
IPod Not Being detected by windows.. pls hepl!!!!!!!!!!!
i have a 5.5 gen ipod 30 gig video. whenever i connect it to my computer, it says 'the usb device attached to the computer has malfunctioned and windows does not recognise it' is there something wrong with my ipod motherboard?? in the meantime it pla
-
Importing multiple jpeg files from local folder into database LOB column
I have to programatically save multiple pictures (jpeg) from the folder on my PC into Oracle table LOB column. I have to be able to choose local folder on my PC where are the pictures, and press button on Oracle Forms to save pictures in LOB column i
-
Short Dump in SAP BW Sys while extracting data from R/3
HI All, I am getting short dump problem in sap bw while extracting the data from r/3 to bw info cube. the error message is like this, Runtime Error DBIF_RSQL_SQL_ERROR Except. CX_SY_OPEN_SQL_DB Date and Time 11.05.201
-
Hp 50g, Conn 4x not working on Windows 8.1
Does anyone else have this issue? If so what are the solutions apart from using a computer with a older OS?
-
I cannot turn my bluetooth on. i go to connectivity-bluetooth then screen selection will be at Off option, when i switch it on it shows no reaction at all. ive done hard reset aswell as software update. no help.