ABC Analysis TCode:MC40
Is there any way to ignore the Consignment Material (K) while running the ABC Analysis using T-Code MC40 ???
Your response is highly apperciated.
Dear,
Try this to get all stock material list using transaction MB52. In special stock select "Not equal to K (Consignment stock). This will gives you a report of stock materials exists in plant and storage location - excluding consignment.
Using transaction MC40 insert this excluded list and run the ABC analysis.
I found this only solution for this.
Regards,
Syed Hussain.
Similar Messages
-
hi-
Environment : ECC6.0
We use the standard MIBC-ABC analysis which changes the ABCD indicators based on the turnover or u can say consumption.
Scenario:
We have low cost value components (say Bolts) but have a high usage/consumption. So based on ABC indicators, they come up for counting very ofter. We dont want to count them every month due to their low value but would like to make them available in standard SAP ABC analysis.
And NO, we dont want to fix the CC indicators for these bolts.
My question as per following?
(1) How can i achieve a situation that when the ABC analysis runs and provides a report that Bolts are A ( high consumption indicator-monthly), i am able to change the CC indicators subsequently for the Bolts to D ( once a year) so that i dont do the inventory count for them. ( I dont want to use MM17)
(2) Can i run MIBC analysis and then execute MC 40 for bolts (if this T-code will assist me since i dont know much about this T-code)?
(3) Can i just run MC40 or is there another T-code which will assist me?
(4) Is there a process in Standard SAP which will be enble me to achieve my requriement.
Looking for any information you all can share.
ThanksThanks for the response.
MICN is the only one that can update the indicator used for cycle counting.
Once MICN updates the Cycle count indicators, can i then go into MC40 or similar T-code, select the range of materials or material types for the BOLTS in the input screen and make a change on the CC indicators manually to D ( annual count)?
However, pretty often the cycle count indicators are precalculated by MICN based on consumption, but then individual items are changed to get a different indicator for specific reasons.
You may have a low value item, which is very important for your processes.
Based on consumption values it may get indicator C, but if you have differences on that item then it is a critical factor for your business, hence you want count it more often, thus you would manually change it to B or even A. (which can be done directly from the MICN report)
My requirement is : I have low value materials in high qty which show in Monthly inventory count due to high consumption. This is my target group to change the CC indicatos to C or D.
When you indicate i can manually change in MICN report, does it mean that i need to run MICN report twice, first to get the actual ABC analysis and then second time, select the materials (BOLT), generate a report and change the CC indicators.
I do see an option to input materials in the input screen of MICN but i dont see the option to input or provide the required CC indicators as a manual input.
If you could provide more information on the sequence of steps, it is appreciated.
Appreciate your support. -
ABC Analysis with Standard Cost
Dear Experts,
Is there a standard ABC analysis report for parts that has only standard cost?
Pls advise, Thanks
Priyou can try usage based abc analysis through mc40.
expects points from you -
ABC Analysis of the materials (MC40)
Hi,
What is the meaning of analysis strategy in the report MC40 (Usage based ABC analysis).
Regards,Hi Rajan,
The report checks for the past usage of the material & based on this will compute the ABC curve. This analysis is normally done when you do not forsee much changes in the consumption pattern, then this report is helpful, as the classification will have a long term meaning.
But if the conumption pattern is changing or going to change in the future, then it is better to run MC41, where-in the future needs are considered & this will give you a better classification of components.
Eg: Mtl A which had no consumption or very little in the past might end up as C when you run MC40, but the reality is, this part will be in great need in the future & so MC41 makes better approach.
Hope the above was helpful.
Regards,
Vivek -
MC40 calculation of ABC analysis / part
Experts,
can you explain the logic behind a Usage.Based ABC Analysis MC40 . In case I choose Usage value (in %).
A= 70
B= 20
C= 10
Thanks in advance
JörgHi Jorg,
It's simple. The system will rank all the materials according to the consumption (usage) value (quantity*price). Then those materials with the highest value (70%) will be ranked A, and so on.
Mario -
Hi,
How can I perform the ABC Analysis on Vendors to check the spends. The Vendor Master does have indicator in Purchasing view.
The Standard TCode MC40 / MC46 does not help.
ThanksHi ,
Thanks for the reply.
My exact requirement is to understand the use of the ABC indicator in the purch.view of the vendor master.There is no scroll down list.I know this has to be entered manually.Can this be configured?How does the entered value gets validated.
Thanks -
Hi,
for the client we have customized the ABC analysis report which shoes the material details and its status for the last 5 years,with last purchase and sales date.
Some materials are not been caught in this report. What may be the reason for this?.
Regardsthe ABC indicator in material master should be the result of the analysis, but not a precondition.
MC40 is a usage based analysis.
do you have consumpion movements in MB51 for that material?
Is it a material like any others that show up in your report? or is it something special like non-valuated, or consignment or PIPElline, or always procured to a project...?
What tables are the basis for your report? -
ABC Analysis of Planned Consumption(Issue against Reservation).
Hi Experts,
Is there any standard report is available for ABC Analysis of Planned Consumption(material issued against Reservation)?
thx in advance...Hi,
I allready tested with Tcodes such as MC.9 (gives details of total & unplanned consump. not for Planned consump.) & MB51(gives details for only one Mov. Type say either 261 or 262 not possible to do ABC ana. for balance of both)
Is there any other std report as ABC analysis of planned consp.
Thx in advance... -
Hii all,
i am using MC40 and MIBC for ABC Analysis report.
few materials, we are using very frequently, even in report its showing ZERO as a total value n total stock value.
please suggest me, why this report is coming wrong for few materials.
Thanks
nishaI think you are mixing a couple things here and loosing the focus for your initial problem,
OMJJ settings of movement types are general settings. I really wonder why you have different values there in standard movements 101 and 201 than the the predefined values given by SAP. I never had to change that in the systems I have worked with.
a 101 is by design a planned movement (unplanned receipts are made with 501) hence the consumption control has a G to control the consumption update (which a tab in additional data of material master). G means always update planned consumption.
But this is only done if the movement is made agains an order with account assignment, otherwise it will post to stock (which is not a consumption)
The second consumption indicator in OMJJ folder "update control" defines to which consumption account the posting is made. the 101 movement takes the decision from the account assignment category, hence you find an indicator for each accounting type there.
a 201 movement is by design a consumption movement. the general consumption is set to R, which decides that it posts to planned consumption in case you reference a reservation, or to unplanned consumption in all other cases.
you always consume from stock and you enter manually account and cost center, so there is no need to for a consumption by account assignment. (which you dont have in case of 201, as you dont do a 201 in reference to a purchase order)
you did nowhere explain the movements that you had for the materials that did not show up in the ABC analysis.
you did not explain what selection you made, by default it looks just at the last 90 days. Are you certain that you had consumption postings in MB51 in that period? -
ABC analysis & LIFO / FIFO evaluation
Hi friends
I am working in an implementation project
1. My client requirs to carry out ABC analysis.
Does it need any configuration ...... Please tell me how to carry out ABC analysis.I also want to show them on SAND BOX & Development server ... What i will have to do ...?
2.Does any body knows about LIFO / FIFO analysis ?I also have to show them in SAND BOX as wel in development server..hi
Go to se16 and enter the table MARC
and pull the material based on the field MAABC for A,B or C
or you can do by
The A B C status is assigned in the materials master...
From the following reports the analysis can be done..
MC40
MC41
For LIFO / FIFO analysis check link
http://help.sap.com/saphelp_47x200/helpdata/en/47/61071349f011d1894c0000e829fbbd/frameset.htm
For doing any testing in Sandbox or Development Server you need to amintain masterdata there
Regards -
Can somebody explain how ABC analysis is done ?
Hi Experts,
Can somebody explain how ABC analysis is done . If I use MC40 transaction there I have 4option but I can use either one of those . For second option , Usage value as number we can directly specify cost and accordingly system will classify materials In A, B and C category .
I have question on 1st 3 rd and 4 th option . How system will classify materials if These option is used .
Please explain with examples .
Points will be rewarded .
Thanks in advance !
NealHi Sir ,
Thanks again , I would explain what I have understood .
MC 40 . Option selected is Usage value with value put are 70 , 20 , and 10 .
Suppose I have 3 mat in plant
Stock Value
1) X 100 kg 1000 ( for 1 kg from MM)
2) Y 20 PC 2300
3) Z 30 lt 40000
Now how would system classify these items ? Will it consider price or only consumption /qty ? or both ?
Please explain with the same figures . Again the 90 days period you said , is it taken automatically ? because on this T code there is no option for entering time period .
Neal -
ABC-analysis in Open Items report
Good day, dear experts!
I got a task from my chief to find out how to use menu path "Go to - ABC analysis" in Open Items report FBL1N/FBL5N.
Everything I've found is a message "ABC analysis not possible here", Message no. 0K076, and old-old note for this message 414907.
Do someone use ABC-analysis for open items?
I think it's useless, but maybe I don't understand something...
IrinaHi,
Nope, it is useful.
Execute FBL1N and select line items (Edit > Select All).
Then click on any amount column.
Then click on Goto > ABC Analysis
You will get the options to classify the line items in the A, B, C categories based on the % creteria etc. on that screen.
Regards,
Gaurav -
Totals, Subtotals and ABC Analysis buttons missing from ALV.
Hi,
I have used FM REUSE_ALV_LIST_DISPLAY in my report without specifying a PF-STATUS that means STANDARD PF-STATUS is used in ALV, and moved from Quality to Production, till yesterday all the features such as Sort, Filter, Local file along with Totals, Subtotals and ABC Analysis were visible, today all buttons are visible but TOTALS, SUBTOTALS and ABC ANALYSIS buttons are missing.
I have not done any changes to the Code nor the layout.
Thanks in advance.
Sunil.
Edited by: Sunil Saini on Nov 24, 2010 11:26 AMHi Lalit,
I have checked the Layout.
In Layout in Quality there are checkboxes in Summation/Totals column in front of Numeric fields,
but these checkboxes are not visible in Layout of Production system.
Regards,
Sunil. -
What does the field Inconsistent mean for ABC Analysis for Cycle Counting report
What does column "Inconsistent" mean for report ABC Analysis for Cycle Counting (T-code MIBC)? The reason I'm asking is because I see TotalStock values greater than 0, but the Accounting 1 view for Material Master and MMBE both show zero stock. I do not understand why TotalStock in the report does not show zero. Can anyone explain how this can happen?
Note: the report is run for consumption/usage date range.
Thank you,
DougHi,
MBEW table and MMBE transaction will show the current stock. When you run MIBC report for consumption, the system considers the consumption for the date range given (from MVER table), which may not be equal to the current stock. Refer the KBA: 1817237 - Stock quantities and stock values in MIBC which explains the system design.
Regards,
AKPT -
Hi All,
Please let me know the concept of ABC analysis for customer clasification in SAP.
What are all the configuation setting needed for the same?
What is the master data to be maintained?
How to run the ABC analysis for customers? with relevant report(s)?
Relevance of the field "ABC Class" (KNVV-KLABC) in Customer Master(how can it be used for ABC analysis for customers).
Thanks & Regards,
RoushniDear Roushni,
As per my concern there is ABC analysis for material but I don't about Customer ABC analysis.
Plaese got through this SAP help link to know about Material related ABC analysis.
http://help.sap.com/saphelp_47x200/helpdata/en/c1/37613d449a11d188fe0000e8322f96/frameset.htm
I hope it will help you,
Regards,
Murali.
Maybe you are looking for
-
Was playing game for months, when I turned ipad on tonite and went to continue playing, it started me as a new user. My old achievements are still in game, but can only view them as the game recognizes me as a new user. How can I retrieve my player i
-
Adding parallel loops programatically
Hi! I'm building a system with some instruments and I want to use the same instrument-VI for all instruments. One way is to do it set it up as 'Possible solution..' (see image). Is there some way where I can loop through the 'hardware settings'-array
-
Access nested array element using this.name - is it possible?
Hi I've got a nested array containing a series of 2 element arrays containing an object name, and text related to that object. I've set it up like this: public var names:Array = [["instance name 1", "text for first object"],["instance name 2", "text
-
HT204291 Airplay mirroring issue
I connect my Ipad 2 to apple tv. Every thing works with my television until I press play. I get this error message "Watching videos with airplay or through HDMI isn't currently available with this app" When I press stop, my Ipad sync to my tv
-
ADVANCE RECEIPT FROM CUSTOMER (SPECIAL GL TRANSACTION)
hi guru's i wud like to know in and out process for Adavance Receipt from Customer under what curcumstances will receive advance amount what kind of entries will be passed and where it can be shown when we make sales order,how the delivery will happe