ABC Analysis for Customers

Hi All,
Please let me know the concept of ABC analysis for customer clasification in SAP.
What are all the configuation setting needed for the same?
What is the master data to be maintained?
How to run the ABC analysis for customers? with relevant report(s)?
Relevance of the field "ABC Class" (KNVV-KLABC)  in Customer Master(how can it be used for ABC analysis for customers).
Thanks & Regards,
Roushni

Dear Roushni,
As per my concern there is ABC analysis for material but I don't  about Customer ABC analysis.
Plaese got through this SAP help link to know about Material related ABC analysis.
http://help.sap.com/saphelp_47x200/helpdata/en/c1/37613d449a11d188fe0000e8322f96/frameset.htm
I hope it will help you,
Regards,
Murali.

Similar Messages

  • What does the field Inconsistent mean for ABC Analysis for Cycle Counting report

    What does column "Inconsistent" mean for report ABC Analysis for Cycle Counting (T-code MIBC)?  The reason I'm asking is because I see TotalStock values greater than 0, but the Accounting 1 view for Material Master and MMBE both show zero stock.  I do not understand why TotalStock in the report does not show zero.  Can anyone explain how this can happen?
    Note: the report is run for consumption/usage date range.
    Thank you,
    Doug

    Hi,
       MBEW table and MMBE transaction will show the current stock. When you run MIBC report for consumption, the system considers the consumption for the date range given (from MVER table), which may not be equal to the current stock. Refer the KBA:  1817237 - Stock quantities and stock values in MIBC  which explains the system design.
    Regards,
    AKPT

  • ABC analysis for Cycle Counting.

    Hi SAP gurus,
    I am facing a problem from the user. While doing the ABC analysis for cycle counting using the Transaction MIBC, he is getting an error " table T159c is not maintained for plant XXXX". when i checked it SPRO cycle counting is not done for that particular plant.
    My question is : Where do we maintainc CC Physical inv indicator ? I have checked at material level in Gen.Plant/Sloc view, it is not maintained . so may be they have maintained at Plant level. where do we maintain at plant level.?

    Hi
    1) Maintain the Percentages against A,B,C,D cycle counting indicators in OMCO
    2) Perform  MICN to schedlue the batch input session for Creation of physical Inventory documents
    3) MIBC-For ABC analysis for Cycle counting .
    Note : the percentages maintained in OMCO will decide on the classification of the material as to when the Physical inventory needs to be done based on either the consumtion values/Requirement values
    Regards
    Sandeep

  • How to realize abc analyse for opportunity

    hi experts,
    i want to build a bex query for abc analyse for opportunities, it should look like this:
    opportunity   probability  category
      test1          75%          A
      test2          30%          B
      test3          15%          C
    i dont know how i could realize that, i have checked the document "how to realize abc analyse" but it doesnt help me.
    could somebody help me?
    thanks in advance
    Quan

    Chi,
    APD stands for Analysis Process Designer , you can use query results or results from an analysis process for further processing , you could use the data model here too.
    check out :
    http://help.sap.com/saphelp_nw04/helpdata/en/49/7e960481916448b20134d471d36a6b/frameset.htm
    for APD information .. I have assumed though that you are in BW3.5 atleast...
    Arun

  • A question about ABC analysis for Cycle counting

    Hello expert,
    What is  RMCBIN00  used for? Currently, user asked me if we can copy  RMCBIN00 and perform ABC analysis by quantity? I have no knowledge about it. Can any expert give some clue?
    Thanks in advance,
    Best Regards, Johnny

    Hi
    RMCBIN00 is a standard ABAP report available within your SAP system (depending on your version and release level). Below is the standard documentation available for this report and a few details of other objects it interacts with such as tables, function modules, includes etc. If you would like to see the full code listing simply enter the object name( RMCBIN00 ) into the relevant SAP transaction such as SE38 or SE80
    RMCBIN00 -  ABC Analysis of Cycle Counting (Physical Inventory)
    PURPOSE
    This report runs an analysis for the chosen material types in the cycle counting method of physical inventory.
    FEATURES
    The analysis takes into account the consumption (usage) or the requirements values of the selected materials for the desired time period. You can decide whether you want to analyze:
    Only materials that have a cycle counting indicator
    All materials; that is, including materials that have no cycle counting indicator.
    Regards
    Anand

  • Age analysis for customers and vendors

    Hi All,
    i needs to create an age analysis report on customers and vendors (0FIAR_C03), analysis could be done on <30 days, >30 days,>60,>90,>120 days , i needs to calculate these based between netdue date for payments and system date. any one can give idea how to do this
    thanks in advance.
    regards
    raja

    Hi Raja
    http://help.sap.com/saphelp_nw04/helpdata/en/41/4b73415fb9157de10000000a155106/frameset.htm
    Try checking the above link. You can use RKF .... Use offsets --- for example <30 offset is -30 in varibles.....
    Standard reports should give some idea
    Regards
    Naga

  • MIBC - ABC Analysis for Cycle Counting -Report : RMCBIN00

    Hi All,
    We are trying to have our CC inventory indicators updated by using report RMCBIN00. We noticed that if a have a part with a very high value it is most likely to get indicator A even though the demand for that part is not as high as for a part with a very low price but that we sell thousands. Can some explain how can we use this report in such a way that considers demand? Thanks for your help.

    A cycle count indicator A or B or C or D is allocated to material in the material master based on either consumption value (consumption X rate) or forecast value (forecast quantity X rate). You can also specify whether this analysis is to consider only the materials with cycle counting indicator or all materials. The cycle counting indicator in the material master records can be updated automatically by this program.

  • ABC analysis for material based on the volume of sales

    Hi,
    Can we have an option of categorising a material according to the sales volume and generate reports.
    Eg;
    Mat1 -Class A >Rs 100000 of sales
    Mat2 -Class B >Rs 50000 of sales
    Mat3 -Class C >Rs 25000 of sales.
    Awaiting your valuable inputs.
    Regarsd,
    Phani Prasad

    vamsi krishna wrote:>
    > Dear Friends,
    > Please mail to me how to configure the availability of material based on the shipping conditions?
    > That is when we give the shipping condition in the sales order (va01) for example by air 1 day, by road 5 days and by water 6 days. The system should automatically give the availability of the material based on the shipping conditions we give in the sales order (va01).
    > With regards
    Hi Vamsi,
    Could not understand your query fully.
    See material availability check is carried out for the requested delivery date or else the system proposes one.
    The time you are talking about By Air 1 day and so on is not taken into consideration while carrying out material check for that is transportation time after goods are released from the Plant.
    owever if you need to configure the transportation time you need to go to
    Logistics Execution->Transportation->Basic Transportation Function->Routes->Define Routes-> Define shipping types
    Here you can define shipping types what you said by AIR by Truck or whatever you need.
    To specify the time you need to go to SPRO
    Logistics Execution->Transportation->Basic Transportation Function->Routes->Define Routes-> Define Routes and Stages
    Here you specify the Transit Duration Transit Lead time and so on which will be taken as a input for determining material lead time by that shipping type.
    Hope it helps.
    Post if u need furthur clarifications.
    Request you to reward points if helpful.
    Thanks & regards
    Abhishek Swarup

  • Transaction MIBC-- ABC Analysis for Cycle Counting - Physical Inventory

    Dear Friends,
    Could you please explain me the cycle count indicator relationship to the percentage of inventory to be counted.
    When i am using MIBC transaction and changing the Percentages....based on percentages the system is proposing the new cycle count indicators for the materials.
    Thanks in advance
    Sanjay

    Dear Sanjay,
    I would recommend you to write your question into the ERP - Logistics Materials Management (MM) topic. I suppose you will get more information about MIBC there.
    Regards,
    Ely

  • ABC-analysis in Open Items report

    Good day, dear experts!
    I got a task from my chief to find out how to use menu path "Go to - ABC analysis" in Open Items report FBL1N/FBL5N.
    Everything I've found is a message "ABC analysis not possible here", Message no. 0K076, and old-old note for this message 414907.
    Do someone use ABC-analysis for open items?
    I think it's useless, but maybe I don't understand something...
    Irina

    Hi,
    Nope, it is useful.
    Execute FBL1N and select line items (Edit > Select All).
    Then click on any amount column.
    Then click on Goto > ABC Analysis
    You will get the options to classify the line items in the A, B, C categories based on the % creteria etc. on that screen.
    Regards,
    Gaurav

  • FBL5N & S_ALR_87012168 - Due Date Analysis for Open Items

    Hi,
    As per the above mentioned i could find the that there is differene in the account balances in FBL5N report and due date analysis for customers. Where as FBL1N and the vendor due date analysis figure in the report are same.
    Just want to know why is difference in customer related.
    Require a immediate reply.....please help me
    Thanks in advance.
    jai

    Hi
    I could not understand which report you compared with s_alr_87012172.
    Have you tried matching FD10N and FBL5N.  If not matching, then there could be problem with authorizations in FBL5N.
    From report S_ALR_87012168, you can also drill down to view the line items.  Hence if you drill down and list the line items, it will give you some clue.
    Try whether if any parked documents are included in FBL5N.
    Also ensure that in report S_ALR_87012168, Database is selected in Data sources.
    Regards

  • ABC analysis and cyclic inventory

    What is the relAtion between ABC indicators and CC indicators?Why do we need to run ABC analysis for cyclic inventory?Cant we randomly assign the CC indicators in MM02?

    Please see the below note
    What is A, B, C and D Indicator for a material for cyclic count?
    All the material may not be important for cyclic count purpose, it may be required to count
    some items frequently and some items rarely.
    A cyclic count indicator A or B or C or D is allocated to material in the material master
    based on either consumption value (consumption X rate) or forecast value
    (forecast quantity X rate).
    The item with more consumption value are classified as A, and with minimum as D.
    u201CAu201D indicator items will be counted frequently (say every month), D will be less frequently
    (say every 6 months or every one year). Daily a number of items will be taken for count, some
    may be with A indicator, some with B and so on.
    Mark all materials that are to be included in cycle counting with a cycle counting indicator
    in the material master record (storage data). The cycle counting indicator is used to group
    the materials together into various cycle counting categories (for example, A, B, C, and D).
    There is an option in SAP to have a fixed indicator for a material say A for a material which
    does not have a high consumption value but it is important to count it every month, then the
    material can be marked as A indicator in material master with indicator u201Cfixedu201D
    In Customizing OMCO, for Inventory Management, you can define for each category the time
    intervals at which the materials are to be counted.
    Fields : No. of phys. inventories per fiscal year for cycle counting
    For e.g. A - 12, B - 6, C - 3, D - 1
    Specifies how often during the fiscal year a physical inventory is to be carried out for a
    material subject to cycle counting.
    The system uses this specification to convert the count interval into workdays.
    Fields : Physical inventory interval (in workdays) for cycle counting
    For e.g. A = 12 times per year and your Total Factory Calendar days = 300
    The interval will be calculated as 300 / 12 = 25 days
    Specifies after how many workdays following the last inventory count another physical
    inventory has to be carried out for a given material.
    The count interval is determined automatically on the basis of the number of physical
    inventories specified for the fiscal year.
    Fields : Float time (in workdays) for cycle counting
    For e.g. A - 10, B - 20, C - 30, D - 0
    Indicates the number of workdays by which the planned count date may vary from the current
    date.
    For examples :-
    For the plant, the float time is five days.
    A physical inventory has been planned for a material belonging to category C for June, 1.
    On expiration of the float time (after June, 6), the physical inventory has not yet been
    carried out.
    Irrespective of the category, the material is parked for the next cycle counting run.
    Fields :- Percentage of performance measure for cycle counting ind.
    Specifies the percentage allocation of the materials to the individual cycle counting
    categories.
    The percentage value is used for automatic assignment of the cycle counting indicator.
    For example :-
    In the given plant, 200 materials are subject to the cycle counting physical inventory
    procedure.
    In Customizing for Inventory Management, the following percentage allocation has been defined
    for the plant:
    A materials: 50%
    B materials: 25%
    C materials: 15%
    D materials: 10%
                100%
    In the cycle counting analysis, the materials are sorted by consumption. After completion
    of the analysis, the cycle counting indicator is assigned as follows:
    The first 3 materials (sorted in descending order according to consumption) represent 50% of
    the consumption and have the indicator A.
    The next 12 materials represent 25% of the consumption and have the indicator B.
    The next 49 materials represent 15% of the consumption and have the indicator C.
    The remaining 136 materials represent the rest (10%) of the consumption and have the
    indicator D.
    Marking Materials for Cycle Counting
    This step is only required if you perform cycle counting for the first time or if you want
    to update the cycle counting indicators.
    In the material master record (storage data), maintain the cycle counting indicator for all
    the materials that are to be included in cycle counting.
    You can set the indicator in one of the following two ways:
    1. manually in the material master record. To do this, choose
       Material -> Change from the Material Master menu.
    2. automatically using ABC analysis To do this, choose
       Special procedures -> Cycle counting -> Set CC indicator from the Physical Inventory menu.

  • ABC Analysis [Update Item Assignment Window]

    Hello Friends
    I am working on Inventory Cycle count in EBS R12. I am facing a problem.
    I create an ABC Analysis for ##FGI sub inventory in M1 Organization on Vision Instance. Then i checked 22 items in my
    On-Hand Availability Window. But when i checked Update Item Assignment window, it shows me 20 items. can you please tell me that
    where my rest of 2 items are missing ? What are the reason or what organization parameter or what item attribute missing ? Do i need to do any special setup for rest of those two items?
    Can you please please further told me that what is the back end process of Compiling ABC analysis ?
    Best Regards

    Hi,
    Did you tried to re-initialize your ABC ..
    I think it can be an issue that you might have defined 2 items later after defining all your ABC compile ,assignments etc.
    And since your ABC compile is working on previous item it might not pick these newly defined items.
    Thanks
    Rahul Tushir

  • Answers: Multiple sorts for different rsum (multiple ABC-Analysis in one)

    Hello
    I want to do an ABC-Analysis i.e. on my ProducLines. I am doing it by using something like:
    CASE WHEN
    RSUM(Sales / SUM(Sales by) * 100) < 75 then 'A'
    WHEN ... THEN 'B'
    ELSE 'C'
    END
    This works fine so far but I need to take the column "Sales" into my request and order the request on that. (to get the "big ones" at the beginning)
    Details on this can be found here: http://blog.trivadis.com/blogs/andreasnobbmann/archive/2009/09/18/abc-analysis-in-obiee.aspx
    My Problem now:
    I would like to do this ABC-Analysis Sales and SalesPreviousMonth and SalesYTD all three in one and the same request.
    I did not find out how I can do different "order by" for my three different Formula-columns. I tried with UNION ALL but did not really get it until now (only the final result can be sorted, but I would need sort column in the subrequests to get correct A,B,C-Values).
    Did anyone already have a similar requirement? How did you solve it?
    Thanks for any hints.
    Thomas
    Edited by: Thomas L. on Jul 23, 2010 6:35 PM

    I am also baffled. I tried to find this "default Captivate quiz" in the help section of Captivate with no results. When I again contacted the representative, he closed the conversation before speaking with me.
    Thank you for choosing Adobe. A representative will be with you shortly. Your estimated wait time is 0 minute(s) and 4 second(s) or longer as there are 1 customer(s) in line ahead of you.
    You are now chatting with 'Khyati'
    Thank you for chatting with us. Please click the "Close" button on the top right of the chat window to tell us how we did today.
    I have posted the entire correspondence on Adobe Captivate's Facebook page in the hopes that I might get some swift assistance from the company.

  • Sales Analysis for a certain period

    Hello Experts,
    In standard Sales Analysis Report, when we run report for a certain period for "Customers" and when we run the report with same parameters for "Items" it gives different results.
    Can anybody please guide me, why these results are different whereas we are using the same parameters in both the Tabs i.e. Customers & Items.
    Thanks & Regards,
    SN

    Hi Shazad,
    One possible reason is that you have service type documents in that period. In such case, the document total appears in Customers tab, but not in the Items tab.
    Could this be the case?
    I hope that helps.
    Regards,
    Toni

Maybe you are looking for