Ability to change budget message (class FMAVC)

Hello,
I'd like to change the parameters of messages of FMAVC class. I'd like to add the description of the fund center/commitment item, while the BCS system issues the "out of budget" messages (for example, message FMAVC005). Although we have tried to use BADI FMKU_BUDGET_EVNT, but it didn't help.
Any help will be appreciated.
Eyal

Have you tried to approach this problem through configuration instead of coding?
Rob

Similar Messages

  • Change the Message class (OB28) for validations

    Hi Experts,
    I was trying to change the Message class (OB28) for validations which are created last 1 year ago, as we have two Validations where each validation has 15 to 16 steps in it. One validation starts with Y & another with Z.  Both are using the same message class as of now.
    But we want to use different message class for validation which starts from Z.  We tried changing from program RGUGBR28 but it will change the message class for the both validation which starts from Y & Z, we need to change to only one validation.
    Please let me know any way out for this.
    Thanks & regards,
    Shilpa

    Hi Shilpa,
    The message class during the maintenance of a validation, it is not changeable because the message class is not attached at the individual validation but at the entire validation class, that is a combination of application and call time.
    During the first creation of a validation at the moment of "document line item" in application "cost accounting" the message class is asked for and these then for the entire validation class, stored in this case "001" in the table GB02C and from now is no more changeable.
    The reason for that is, that a change affects all validation of a grade just globally and that even cross-client, since the GB02C is not client-specific.
    I hope this helps.
    Regards
    Ravinagh Boni

  • How to change message class selected for validation ?

    Dear all,
    For testing, I have created a new validation (applic. area : FI, Callup point:2) with a existing message class (/EACA/BTA_GL).
    But now, I would like to create a new validation for the same application area and callup point, but with another message class (that I have created with Z_...).
    But unfortunately, I cannot choose another message class when I create a new validation.
    Could you help me ?
    Thank you and best regards

    To change the message class of a callup point please use program
    RGUGBR28 (description in SAP note 6975). After making the change,
    generate the coding with program RGUGBR00 for the application (without
    marking the last two checkboxes).
    kind regards,
    Diogo Peretti.

  • How to change of Messge classe assigned to Call point?

    Dear friends
    I have defined one validation, in line item call point - 2, I have defined one message class. Now I want to change the message class assigned to call point 2 ie. line item.
    Please help me how to change the message class.
    Thanks in advance.
    Regards
    Kiran A

    hi
    Message class cannot be changed ... As message class is for one particular submodule
    eg: message class for account receivable /account payable
    message class for asset accounting.
    So if you have created a validation you might have created for account receivable so message class for account receivable would be displayed by default you cannot change it to message class for asset accouting . you have option for changing message no but not message class.

  • Message Class for Validations

    Dear Experts,
    We are on SAP 4.6C. I am trying to create a validation on WBS elements
    for a project. Using transaction GGB0. I would like to issue an error
    message from a different custom message class. However, I cannot
    change the message class for the WBS element validation. The "Message
    ID" field on the Create/Change Validation screen is greyed out and the
    Extras -> Change Message Class is also greyed out.
    Any suggestions would be greatly appreciated.
    Regards,
    Venkat.

    Can't help you with this one, I can just confirm the behaviour. However, this question is far from BPM and Workflow. Perhaps you should ask the same question in one of the ABAP Development forums (and add a pointer to it from here and close this question).
    It's not easy to tell which forum is most appropriate. Perhaps the "Enhancements and Modifications" forum could be said to be appropriate, as the validations and substitutions can be said to be a sort of enhancement technique. I am sure someone there will disagree, but that's the only candidate I see besides "ABAP, General".

  • Change message control: KI- message class, message no-281

    my user is asking to change standard SAP message from error to warning. Can I do it in Controllinggeneral controllingchange message controls.
    He is asking for KI message class and message no-281.
    User is entering cost object for the balance sheet account and asking us convert error message to warning. The message is appearing as follows."Error Do not assign any objects in cost accounting to account 7091000 ".

    Hi,
    You can change it via OBA5 transaction. Enter application area KI, and set 'W' flag for 281 error message.
    Regards,
    Eli

  • In the message class M7 i NEED TO CHANGE THE MESSAGE 301 FROM E to w.

    In the program LMBGBFES I want to change the mesage e301 to w301 in the enhancement point but sap is not allowing to do so.
    CAN YOU GIVE A SOLUTION TO HOW TO DO IT.
    with regards ,
    Mahasweta Mitra

    hai mahasweta,
    u cant change the message from E301 to W301 as the code where the message is placed does not come under any enhancement point so that cannot be enhanced , u can do even with implicit enhancements but that does nto fall under it i mean uisng implicit enhancement options u can add some new code at start and end of the programs, u can use enahcnement poitns to enhance the code which comes under that point and it is obvious sap do not allow everythign to be modifed , so if u want to really chnage ti then u cna use access key and change it but it has implications on other programs from where this is called
    regards
    m.a

  • Is there a way to change the message received in Outlook from Mavericks calender?

    Hi there
    I found a post discussing this whereby a user was advised to edit the ITIP.stings file in the contents of the iCal.app to change the standard message that states "To accept or decline this invitation, click the link below" etc message that an Outlook user received when getting a calender invite from Mavericks Calender.
    The post is here:
    Is there a way to change the standard email message?
    Problem is, on Mavericks it does not have that string in that file - I've actually checked ALL the .strings files in that folder but to no avail. Did it move somewhere else on Mavericks?
    On another note...this whole process is part in part moving from Entourage to Mac Mail and Calender due to Apple's (illogical) removal of the ability to sync with anything other than iCal / Mail / iCloud. So we manually moved everything across (thousands of mails and hundreds of folders) and hundreds and hundreds of calender events.
    Now it syncing but herewith the problem...if I create an event and send it to someone, they receive it as the iCloud account email and not our work email (pop account with our own domain). Even then when I open it in Outlook, it has some horribly malformed address and when you accept, you get a delivery failure.
    So we create a different Calender (On the Mac) and this sends 100% (except for the message in the body we'd like to change) but this does not sync with the Iphone or the iPad. Then we have to manually change the calender event to the iCloud calender and it brings up a message that its going to send the update to all the attendees...and you must choose between send via mail or send via server.
    What do I do!?

    Anyone? Just need to know where I can change that message and also how I can set up the icloud calender to send invites using my work email address (as configured in Mail)?

  • Change error message to warning message

    Hi Experts,
    How can we change error message to warning message.
    Eg: T-code : SE91 shows the message. If i want to change message class PG, message no 26 error to warning what will be the process.
    Regards
    Ratan

    Hi Ratan,
    Message class PG is used in the below mentioned Standard SAP Methods and Includes, So it is not suggested to change the SAP standard code.
    Regards,
    Raja Sekhar

  • Change of Message status from Error message to Warning message

    Hello,
    I would like to know the configuration details of changing the status of a message class from Error message to warning message.
    Thanks
    Manish

    Hi,
    You can do it via OBA5 transaction; enter the application code, and put an entry for the message setting the flag to warning. Keep in mind, that not for every message it could be done.
    Regards,
    Eli

  • Change error message as warning

    Hi All
    I changed Gl account from B/s item to P/L item. while doing this i got error, in OBA5 i made this error message as warning.
    i would like to know what is the impact if i change the error message as warning.
    regards
    prasad

    pls note that this setting applies to all the program which uses this message class. SAP would not be responsible if standard message class is modified.
    hope this helps:
    http://www.ams.utoronto.ca/Assets/output/assets/Developmentstandards_guidelines_335678.pdf.pdf

  • Issue in maintaining Long Text in Message Class

    Hi
    For Note implementation 1413492, I have to maintain long text, when I click on Long Text , I get a pop-up Create Modification , with 2 options for Template Type (1) Original Text (2) Template (With Headers)
    Can anyone let me know how to proceed further, whatever name I give for the Modification, I am getting Error Message saying 'Enhancement Name violates the namespace convention (Note 989653)', I have tried unchecking the Self Explanatory check box as well, but still I get the same error message.
    Below is the Long text I have to maintain class FR, message number 533
    7. Create new error messages in the message class FR:
    Call transaction SE91, enter the message class FR, and choose "Display" and
    then "Change". Enter the following new messages:
    Message Message short text:
    533 Error while calling RFC destination
    534 Contract Accounts Receivable and Payable is not installed in the
    system
    535 For company code & there were & data records transferred from
    FI-CA
    536 Error during data transfer from FI-CA for company code &; error
    text:
    Set the "Self-explanat'y" indicator for messages 535 and 536.
    Enter a long text for messages 533 and 534:
    Long text FR 533:
    CAUSE
    An error occurred when testing the RFC connection to Contract Accounts
    Receivable and Payable. The message text is:
    &V1&&V2&&V3&
    SYS_ADMIN
    Check the settings of the RFC destination &V4&.

    Hi Ryan,
    Extract from note 989653;
    Note:                                                                               
    The name of the modification object must start with:                                                                               
    o  'Z'/'Y', or                                                                               
    o  the customer namespace available in the system (TRNSPACE table).                                                                               
    Otherwise, message 645 will appear because the SAP namespace is not   
    permitted.                                                                               
    My suggestion would be to start the name with a Z.
    Regards,
    Nick

  • Change the valuation class of material [Stock transport order scenario]

    Dears,
    Client would like to change the valuation class of material.
    There is no open Purchase order/Process order/Purchase requistion and stock in plant.
    Scenario- One Stock transport order is created.
    For same goods issue (351-issuing plant) and goods receipt (101-receiving plant) is done.
    When we are going to change the valuation class of said material, message is "purchase order is open
    and it shows the no of STO [for which receipt and issue is done]"
    To resolve this issue we had first delete the STO line item no(ME22N). Then change the valuation class.
    (this allows). and then undelete the STO line item. Through this we can change the valuation class of material.
    Please advise in such business process that this is right way or there may be other option.
    Thanks & Regards
    Rajan

    rajanshah219,
    Here's my take on how to fix:
    *Manually change Config TCode OMT4 - change message MM 326 & 327 to type "W"   (if open order exists...now you can enter through warning messages)
    *If inventory exists, then issue out of stock to a cost center
    *Change valuation class
    *Put stock back into inventory (reverse to that same cost center)  Note issue out and reverse back into inventory must happen in the same posting period.
    **Valuation class should be changed as expected
    **Manually change config  TCode OMT4 - change message MM 326 & 327 back to type "E"
    Thanks,
    Jason

  • How do I change a message in Pers Admin to an error from a warning?

    Hi,
    I need to change message PG016 from a warning to an error but have had a look around the IMG and cannot work out where the table is? Can anyone point me in the right direction?
    Thanks
    Hannah

    Go TO Transaction se91 and then give the message class as PG and then enter the message number as 016 but in this table you can change the text and i dont think so this will allow you to change from waring to error. The standard program whcih is using this message class and its uo to the program what;s wriiten there to send this message as warning or error.
    Hopr this would help.
    thanks,
    Amar

  • How to increase the length of a message in message class

    Hi Friends,
    Is there any way to increase the length of a message in a message class as the maximum length is 72 chars.
    My requirement is I cannot use the Long text option.
    Thank You

    HI,
      We cannot change the message length in the message class
    but you can do one thing ,
    while giving the message in your msg class write till which you are allowed to and then you put '&'
    eg : this is message &
    now goto text elements and create a text element suppose T00
    and write the remaining text in that text element.
    and when you want to display the message do it like
    message i00(zmsg_class) with text-T00.
    it ll work.
    *****Reward if useful,
    Thanks & Regards,
    Sunny Suren .C.

Maybe you are looking for