Ability to jump to a particular set of Search Results same like google

Hi,
_Ability to jump to a specific set of Search Results_.
Currently we are able to show 10 records on screen at a time in the Search Results table. If we want to see the next 10 Records then there is a dropdown and on it we need to select the "more" option. Then next ten records will be displayed.
But now we dont need the "more" in the dropdown. We need to show 1-10 ,11-20, 21-30, 31-40....Or else we need to display the page numbers same like in Google or our forums search results page.
Directly we need to select the required range and directly jump there.
My current poplist is showing that 0-10, more. But i need +0-10,11-20,21-30,31-40,41-50, etc.,+
But we have 300 results in the table and we do not have the option of showing 0-10,10-20,20-30,30-40..
Simply it is showing 0-10, more. If we select more then it shows 10-20. we cannot jump to the required range (ex:30-40).
Quick response appreciated.
Regards,
Venktesh

I have a couple things I would add as well:
"An option to link/ unlink ALL selected mask layers, instead of having to go down manually doing it on each masked layer." that wouldve saved me literally an hour at work today.
My request is to have a "liquify all" option where you can essentially easily batch all selected masks or layers and apply a saved mesh without having to do it manually.
As a person who professionally uses photoshop for 8 hrs a day every day this feature would save me an easy half hour on many files.  It also would cut down on the "mistakes" we make by missing  one random but essential mask.
One more suggestion is to enable "warp" in transform to work with the "transform again" command as it is the only one of the forms of transformations that does not allow it.
Thanks for reading
Steph

Similar Messages

  • How to change the layout set for Search Results

    Hi gurus.
    I’m developing a search component for KM Search iView, and as a requirement the layout must change dynamically to display the search results.  How do I get this to happen?
    public SearchParamsMap getSearchParamsMap() {
         SearchParamsMap m = new SearchParamsMap();
              try {
              IQueryEntryList list =                   this.createQuery();
                   m.put(SearchParamConst.PARAM_SEARCH_QUERY_ENTRIES,                list);
              } catch (WcmException e) {
                   e.printStackTrace();
              m.put(
                   SearchParamConst.PARAM_SEARCH_IN,
                   SearchParamConst.SEARCH_FROM_FOLDER);
              m.put(SearchParamConst.PARAM_SEARCH_FOLDER, path);
              return m;
    private IQueryEntryList createQuery() throws WcmException {
              Hashtable searchParameters = new Hashtable();
              searchParameters.put(
                   SearchParamConst.PARAM_ITEMS_SELECTION,
                   SearchParamConst.ITEM_ONLY_DOCS);
              searchParameters.put(
                   SearchParamConst.RESULT_LAYOUT_SET,
                   "Sed_Comunicados");
              SearchQueryListBuilder sqb =
                   new SearchQueryListBuilder(searchParameters);
              IQueryEntryList qel = sqb.buildSearchQueryList();
              return qel;
    In the createQuery() method, code searchParameters.put(
                   SearchParamConst.RESULT_LAYOUT_SET,
                   "Sed_Comunicados"); is not working.  Also, where do I find the documentation for Class SearchParamConst?

    I have the same question.  Any help will be greatly appreciated.

  • 'Jump to' a particular slide in adobe captivate using edge animate.

    I would like to 'jump to' a particular slide in adobe captivate using interactions created in an edge animate file. Is anyone able to help me with the javascript needed to do this?

    Hi Leith,
    From what I know, such functionality is currently not available.
    Found something related, but this does not answer your question, I think
    Using Edge Animate with Captivate
    Thanks,
    Preran

  • When using quick edit for compressed CSS, edge code does not jump to the particular class but displays the whole thing. This destroys the whole purpose. Does anyone know a fix or extension for that.

    When using quick edit for compressed CSS, edge code does not jump to the particular class but displays the whole thing. This destroys the whole purpose. Does anyone know a fix or extension for that.

    I suspect that beautify doesn't touch CSS that it is not aware  of (e.g. new properties/syntaxes, vendor-prefixes). See if there's a newer version available.
    Which compressed CSS are you using? Most CSS libraries come with both compressed and original stylesheets, so use the original one during development/debugging, and switch to the compressed one for deployment.
    Randy

  • How do I set Lightroom not to automatically jump to a collection set after I creat one?

    How do I set Lightroom not to automatically jump to a collection set after I create one? Its so annoying. Also, why does lightroom close my folder hierarchy every time I move a folder? Thats annoying too.

    No way that I know of Josef but you can place a comment here about the issue. This is the new way to have your issues raised and heard.

  • Delivery quantities only in multiples for a particular set of customers

    Hi all,
    I'm having a requirement and want to know is there any way to solve it by configuration:
    I have to deliver the products in multiples of 5.i have activated this in the material master and it functions properly and issues a warning message when i change the quantity while picking in delivery so  i have converted this message into ERROR message but my problem is i have to activate it only for a particular set of customers..is there any way to achieve it ..i have tried it by tick mark   "switching off rounding" in customer master but this error message is still there for these customers also .
    Can I  acitvate the delivery quantities only in multiples of a particular set of customers..?

    Hi all,
    I have gone through your suggestions but it didn't help me a lot..I am able to trigger rounding profile for a particular set of customers but this thing  can be achieved only in sales Order , i am unable to do this at Delivery level, at delivery level system is allowing me to change the quantity irrespective of the rounding profile.
    Can anyone suggest me how to achieve this at delivery level.
    I have gone through Logistics - General>Control for Quantity Optimizing>Assign Control Profiles
    here also , application for triggering of control profile is given only for sales order.
    plz help.

  • Restrict an iview for a particular set of users

    Hi,
    I would like to restrict an iview for a particular set of users.
    Please let me know how to do that
    Points will be rewarded for sure for the helpful answer
    Thanks
    Bala Duvvuri

    Hello,
      Option 1: create a separate role and assign to those set of users.
      Option2: if its custom developed iview(PAR/Webdynpro java), by using (UME service AP)java code  we can find those users and we can restrict content of iview(create a uinique group and  while executing iview , if the user belongs to this group show a message u don't have authorization to execute this iview).
    To me option is good  and easy.
    Regards
    malli.....

  • I have an IPad 2,I have previously had no problem sending photos by email.But now for some reason photos I send are not successfully been sent. I'm not sure if I have changed a setting by mistake. Is there a particular Setting I should be concentrating on

    I would be very appreciative if anyone could give me some advice!I have an IPad 2,I have previosly had no problem sending photos by email.But now for some reason photos I send are not successfully been sent. I'm not sure if I have changed a setting by mistake. Is there a particular Setting I should be concentrating on to making it successfully work again?Cheers!I look forward to hearing back from you!Aussie Fella!

    is this how you send your photo?
                            Tap a photo, album, or event to select it.                    
                            Tap > Email.                                            
                            Confirm or change the photos you want to share by tapping an option.                       
                                  Select all the photos in an album or event: Tap All.                                                        
                                  Select a range of photos: Tap Choose, tap Range, tap the first and last photos in the range, and tap Next.                                                        
                            Type the address of the recipient, add a message, and tap Send.

  • Ability to jump to a specific page of results (rather than next 10, next 10

    Hi,
    Currently we are able to show 10 records on screen at a time in the Search Results table. If we want to see the next 10 Records then there is a dropdown and on it we need to select the *"more"*. Then next ten records will be displayed.
    But now we dont need the *"more"* in the dropdown. We need to show 1-10 ,11-20, 21-30, 31-40....Or else we need to display the page numbers same like in Google or our forums search results page.
    Regards,
    Venkatesh Palepu
    Edited by: Palepu on May 11, 2010 4:19 AM

    Hi Reetesh,
    Thanks for Reply.
    But we have 300 results in the table and we do not have the option of showing 0-10,10-20,20-30,30-40..
    Simply it is showing 0-10, more. If we select more then it shows 10-20. we cannot jump to the required range (ex:30-40).
    Quick response appreciated.
    Best Regards,
    Venkatesh Palepu
    Edited by: Palepu on May 11, 2010 4:26 AM

  • Different sequence of search results in different environments with same set of documents

    I am using Sharepoint 2013 Foundation version.
    I have set up 2 environments (say environment A and environment B) with the same Window baseline and Sharepoint server farm setup. The similar set of documents have been uploaded to both environments. With input of exactly the same search string at the search
    field and enter button pressed, the sequences of entries shown on search result page are different in these 2 environments.
    In particular, there is a document 'Monthly Newsletter.pdf' uploaded in both environments. When I type 'Monthly Newsletter' in search field and press enter, this document appears as the first entry in the search result in environment A, but this same document
    appears as the 8th entry in the search result in environment B. 
    May I know the reason? Thanks a lot for advice!

    There are a lot of factors that go into computing the "relevance" of any one document. One factor is "closeness". So one question would be how identical are the two environments? Same number of site collections? Are the
    documents at the same depth? (sites -> subsites -> libraries -> folders)  Are the libraries of the same type, using the same content types and the same metadata>  In both cases are you searching from
    the same site and are the documents at the same depth?  
    Ranking is also impacted by past searches. The more people who have clicked through to the document, the higher it will be ranked in the future.
    If the two environments are identical, and are only being used for testing, Reset the Indexes and do a new Full Crawl and then test.
    Mike Smith TechTrainingNotes.blogspot.com
    Books:
    SharePoint 2007 2010 Customization for the Site Owner,
    SharePoint 2010 Security for the Site Owner

  • What setting do I need to change to have a search result file (pdf. or whatever) open instead of automatically download?

    Firefox downloads files automatically when opening a opening a search result. What setting do I need to change to have the search result file (pdf. or whatever) open instead? Something changed yesterday and I lost the ability to open the files vs. download.
    == This happened ==
    Every time Firefox opened
    == July 7, 2010

    Hello,
    Normally, when I use my online account, when i select a document to open with excel or with adobe, the applicaiton installed on the PC, is used to open the files.
    Can you check the under control panel, default programs, and see what program  is associated to the PDF files?
    When you try to open one of those pdf files from your back, what happens?
    If you download them to the HDD, are they automatically associated to ADOBE?
    Thanks,
    I work for HP! Please remember to provide and if this helped click ON

  • Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i have it set at "Use new precise locations from my device."

    Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i have it set at "Use new precise locations from my device."

    If you are missing using google maps - try the Nokia map app called "here"

  • I have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me

    i have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me???

    If Join was on then your home wi-fi must be set to Non-Broadcast.  If you did not set this up (maybe your provider did) then you will need to find the Network Name they used, and any password they used.  The SSID is Security Set ID and to see more try http://en.wikipedia.org/wiki/SSID .  Basically it is the name used to identify your router/network.  A lot of times the installer will leave it set as LinkSys, or Broadcom or whatever the manufacturer set it as for default.  Your best bet is to get whoever installed it to walk you through how they set it up, giving you id's and passwords so you can get in.  HOWEVER, if you are not comfortable with this (if you set security wrong, etc.) you would be well ahead of the game to hire a local computer tech (networking) to get this working for you.  You can also contact the vendor of your router and get help (if it is still in warranty), or at least get copies of the manuals as pdf files.  Sorry I can't give you more help, I hope this gives you an idea where to go from here to find more.

  • I have a IPhone 5 and Iphone 5s. Both are set up with the same account ID and running IOS 8.0.2. When the phones are connected to the same Wifi at home, both phones will ring when someone call in to one of the phone.  Anyway to solve this problem?

    I have a IPhone 5 and Iphone 5s, each phone is activited with a different service provider. Both are set up with the same account ID and running IOS 8.0.2. When the phones are connected to the same Wifi at home, both phones will ring when someone call in to one of the phone.  Hence you do not know exactly which line the caller called.  If you answered using the wrong phone, then anyone calling the other number will not get through.  Anyway to solve this problem?

    Hey David Koh TP,
    Thanks for the question. It sounds like your devices are set up to use continuity together. Specifically, it sounds like you are signed into the same Apple ID in FaceTime, and have iPhone Cellular Calls enabled. To resolve your issue, simply disable this setting:
    Connect your iPhone, iPad, and iPod touch using Continuity
    http://support.apple.com/kb/HT6337
    Turn off iPhone cellular calls
    To turn off iPhone Cellular Calls on a device, go to Settings > FaceTime and turn off iPhone Cellular Calls.
    Thanks,
    Matt M.

  • I want to Facetime my Ipad from my Iphone but they are both set up with the same Apple id.  Do I need to create a new id for one of them in order to facetime with the other?

    I want to Facetime my Ipad from my Iphone but they are both set up with the same Apple id.  Do I need to create a new id for one of them in order to facetime with the other?

    You should be able to call the iPad using your Apple ID from the iPhone. When calling from iPad use the iPhone's phone number to initiate the call.

Maybe you are looking for