About call a webdynpro program in R/3 report program.

hi,experts
i am searching a report program which was written by my colleague who have left my project.
there is one button displayed on the ALV tool bar of this report program.when i push this button,a message are sent to protal and displayed in tasks,then i log into portal,double click the message,a webdynpro program will be called and used to further process.
i really want to know how i can decide to use which webdynpro program to be call and used. for example,now the R/3 program use the webdynpro program named AAA, i copy BBB from AAA,and want to replace AAA by BBB in this program, how?
i don't know how to meet this simple requirement such as upwards and confused about it. hope anyone can show me some information.
thanks in advance.

It is not that simple :).
Actually there is a workflow involvedi n this. On clicking the alv button a workflow gets triggered and the task appears in the SAP Inbox which anyway displayed in the UWL of the Portal.
just try changing the SWFVISU transaction entry for that particular task and change the applicaiton name to your new application name and re-register the system in the UWL Admin Pagem, i hope it works.
If you did not find any entry in SWFVISU, the developer might have exported the XML in UWL Administration page in the portal down load it identify the old applicaiton name nad replace it with your new application name and upload the XML
[Helpful link|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0731bbc-810b-2a10-7fb8-900f16fd3c7d]
Abhi

Similar Messages

How to call Outbound interface using report programs

Hi experts,
    i want to call outbound i/f prog using 2 report programs...one report prg passing 2 parameters to outbond i/f prg & another report prg simply calling the outbond i/f prg... either report1 or report2 call this outbond i/f prg.
for instance,
1.report1 has following parameters
         param: tknum,vbeln
2.report2 does not have any parameters
         No param
3.outbound i/f prog for some calculation
points will be given..............
thanks in advance,
regards
vijay

Hi vijay,
     To call a program in another program you have to use the Keyword <b>Submit</b>.
EX; Report zprg.
      SUBMIT zprg1.
   So, where you require a program you can call that program by this keyword.
Regards,
Narendra.

Can report program trigger a job and then a job trigger another report?

Actually I'd like one ABAP4 report program trigger another ABAP4 report program and yesterday some people here suggested me to use SUBMIT statement at the end of the source program, but if we don't want to touch the source code of the source program, what would be the best way to trigger another report program, in this way: report program1 -> job -> report program2?
or report program1 -> event -> job -> report program2?
Thanks

Hi Kevin,
I know this is a late reply and you probably already solved your problem. However, the new Job Scheduling capabilities of SAP NetWeaver might be something to look at. You can find more information about this on SAP Service Marketplace under quick-link job-scheduling (http://service.sap.com/job-scheduling)
Kind regards,
Edwin Esser

Calling Webdynpro application from report program

Hi All,
I am working with report program which displays ALV grid and if i select a row and click the button in application toolbar it should navigate to webdynpro application.
This webdynpro application should get loaded with the datas that i ve selected in the ALV output.
for eg., in alv display
select carrid connid
X        10      10
           20      20
Webdynpro Application
carrid   10
connid 10
Kindly help me in acheving this.

Hi,
SET/GET parameters wont work in WD Envoirment, because WDA programs are executed in browser and that doesnt has a connection to SAP GUI.
You may use the shared memory to transfer work area from the report program, and import the work area agin in the WDA in the WDDOINIT method of the controller where you want to set the fields.
data: send type string.
send = 'enter file name here'.
export send TO shared memory indx(XY) id 'wda'.
CALL FUNCTION 'CALL_BROWSER'
EXPORTING
   URL                          = 'http://SSR11S07.8000/sap/bc/webdynpro/sap/ztest_wda1 '.
And in the WDDOINIT method of the controller, you may import the variable.
data receive type string.
import send = receive from shared memory indx(xy) id 'wda'.
Then you may use the method set_attribute to set the value to respective UI element on the screen.
Regards,
Runal

How to call report program from WebDynpro Application

HI
How call report program in WDA.
1. To extract the xml files and store the data in to data base table, program name is "zprogram_application".
When run the se38 it's working fine and save the data in database.
2. When i click "SUBMIT" button the web dynpro application automatically run the Report program "zprogram_application" and save the data into data base table. This is my requirement please give me suggestions.
3. I want run the report program in web dynpro application.
Thank you
V.VENKATESH

From within the WDA Event handler you can call the program using SUBMIT ... AND RETURN. You might have to be careful with what the program does. It must run as though it is in the background. There is no connection to the client machine - so no SAPGUI calls. You might also consider the addition VIA JOB job NUMBER n... to the SUBMIT command. That will allow you to start the submitted program as a background job. Your WDA can then continue processing as the submitted job runs in parallel.

Error when Interative Adobe Form is called from Webdynpro ABAP.

Hi Experts,
I trying to call a Interactive adobe form from ABAP Webdynpro application but I am facing the below error.
Line: -
The following error text was processed in the system GJD : User session (HTTP/SMTP/..) closed after timeout
The error occurred on the application server az18u021_GJD_01 and in the work process 0 .
The termination type was: ERROR_MESSAGE_STATE
The ABAP call stack was:
Method: PREPROCESS_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
Line: -
When I uncheck the enabled property of the Interactive From in the Page of the WebDynpro I am able to execute the application successfully.But the Adobe form behaves as a Static Form when I uncheck the enabled property.
So kindly provide your valuable suggestions to avoid the above error when I am calling a Interactive adobe form from Webdynpro ABAP.
Thanks in Advance.
Regards,
Arun.

Hello,
Hello, are you sure you have your ADS credentials configured correctly and valid? I guess you know that is the only difference between clicking enabled on true or false. If you are not sure, you can use SE38, search for FP_* and pick some reports to check the licencing. The names of the reports are good enough to recognize the right one.
Or maybe that is a security problem? Have you checked the ADS_ERROR string? Did you use the ADS trace?
check: http://help.sap.com/saphelp_nw70/helpdata/en/2c/241a427ff6db2ce10000000a1550b0/content.htm
and especially note 999998
Regards, Otto

Calling a Report Program In Web Dynpro Using Submit statment

Hi all,
Can any one suggest how can i call a report program form Web Dynpro using Submit statment. I tried to call it its showing Field symbols not defined error. Is their any other ways to call Report in a Web Dynpro?. I have posted the error message when i tried using SUBMIT ZRR AND RETURN CONTROL
Field symbol has not yet been assigned.
The error occurred on the application server mnghcmsap_HRS_00 and in the work process 1 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Form: CHECKBOX_OUT of program SAPLKKBL
Form: GEN_LINE_OUT of program SAPLKKBL
Form: DATA_OUT_SIMPLE of program SAPLKKBL
Form: LIST_OUTPUT_NEW of program SAPLKKBL
Form: FIRST_LIST_DISPLAY of program SAPLKKBL
Module: LIST_DISPLAY of program SAPLKKBL
Function: K_KKB_LIST_DISPLAY of program SAPLKKBL
Method: PRINT_BACKEND of program CL_GUI_ALV_GRID===============CP
Method: SET_TABLE_FOR_FIRST_DISPLAY of program CL_GUI_ALV_GRID===============CP
Form: PBO of program SAPLSLVC_FULLSCREEN
Edited by: VINMANO on Jul 22, 2009 2:54 PM

HI,
Its possible to call report program from Web dunpro...
chk out dis link,
calling report(se38) in webdynpro abap
By the way are using field symbol anywhere and left it unassigned?
Thanks,
Divya.S

Question about calling batch file by using the System Exec+.vi?

Hi
I have a problem about calling batch file. I know that the system exec is equivalent to "run" in Windows. I called the batch file c:\rtxdos\bs\ch0.bat successfully in the "run" but it didn't work in the LabVIEW program. The dos prompt had an error message "Bad command or file name" and it just happen when I call this batch file in LabVIEW. Why?
Bill.

Hi,
Try to set the "working directory" parameter of System exec.vi to the directory where the batch file is located. It may help.
Good luck.
Oleg Chutko.

The Problem is about Standard Back Button Function in Report Program

The Problem is about Standard Back Button Function in the Report Program.
In the Report,First call screen Then Using "write" output some information,That is ok. but In the GUI When I press back button that is standard button,it exit screen to program.
My question is how can i do When i press back button,the screen can be back forward first screen instand of exit screen to program. Thanks .

This problem is solution.I call screen using T-code and submit report In PAI,at last return to PAI.That is OK.

The Problem is about Standard Back Button Function in the Report Program.

The Problem is about Standard Back Button Function in the Report Program.
In the Report,First call screen Then Using "write" output some information,That is ok. but In the GUI When I press back button that is standard button,it exit screen to program.
My question is how can i do When i press back button,the screen can be back forward first screen instand of exit screen to program. Thanks .

Hi,
You can define your own PF-STATUS and in that assign the function code for BACK button anything except 'BACK'.
The code would somewhat look like this:
SET PF-STATUS 'TEST'.
write : itab-col1,
itab-col2.
in the PF-STATUS 'TEST', assign the function code to BACK button as 'BCK'.
Now in your program you can use the event AT USER-COMMAND.
In this you can handle the functionality of BACK button.
Hope this helps.
Regards,
Himanshu

Calling a Report Program from Web Dynpro

Hi all,
I have a requirement, where i have to call a report program from web dynpro?. Wether its possible to call a report program in web dynpro?. Is we can call it, how this functionality has to be achived?

Hello,
Yes it is possible to call report using SUBMIT statement from one of the method defined in COMPONENTCONTROLLER's method tab.
Once you define the method with SUBMIT statement then call that method with proper event.
Rest configuration will remain same for ABAP webdynpro.
Hope this helps.
Thanks,
Augustin.

Itz possible to call one report program into another program

hi guys,
i had a doubt that can i call a report program into another report program by declaring their name into the second program like as we calling Includes ,function modules and like class and their methods .
if anybody done this or know how to do this, give me the details and explination about this friends
if it possible with screenshots and codings
Thanks & Regards
Saigijeo

Please search before posting, do not ask basic questions here.
Always do your own work before turning to the community with specific problems.
Thread locked.
Thomas
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]

Calling a WebDynpro application from a SRM Badi

Hi - I will like to call a WebDynpro Abap application from Badi/method IF_EX_BBP_SC_MODIFY_UI~SC_MODIFY_SCREEN in SRM. The purpose is to force certain users to put in som "standard" values to be used in the following steps in the purchase procedure. As it not possible to use ordinary Abap POPUP functions modules I have made a small WebDynpro program to do the wanted function. But when I start the url with CALL FUNCTION 'CALL_BROWSER' or CALL METHOD CL_GUI_FRONTEND_SERVICES=>EXECUTE the return code indicates a frontend error from ITS.
Is there any way that I can get over this error and start my WebDynpro from a Badi in SRM?
Or is there maybe another way to send a POPUP for information to the internet user?
Thank you in advance:
Bg Steen Pedersen

Hi Radhika
Have used fm WDY_EXECUTE_IN_PLACE to start my application. Bu I still get errors as shown below. Do you have any idea of the problem?
Følgende fejltekst blev behandlet i systemet SRD : Template interpretation failed. Template does not exist.
Fejlen forekom på applikationsserver SAPSRMUDV01_SRD_00 og i arbejdsproces 0 .
Afbrydelsesart var: RABAX_STATE
ABAP-kaldhierarki var:
SYSTEM-EXIT of program SAPLWDY_PRGN_NODES
Function: WDY_EXECUTE_IN_PLACE of program SAPLWDY_PRGN_NODES
Method: IF_EX_BBP_SC_MODIFY_UI~SC_MODIFY_SCREEN of program ZCL_IM_BBP_SC_MODIFY_UI=======CP
Method: IF_EX_BBP_SC_MODIFY_UI~SC_MODIFY_SCREEN of program CL_EX_BBP_SC_MODIFY_UI========CP
Form: SC_UI_MODIFY of program SAPLBBP_SC_UI_ITS
Function: BBP_SC_UI_ITMCHOICE_SCENARIO of program SAPLBBP_SC_UI_ITS
Form: LINKS_DEF_SCREEN_SET of program SAPLBBP_SC_UI_ITS
Form: UI_SCENARIO_SET of program SAPLBBP_SC_UI_ITS
Form: APP_INIT of program SAPLBBP_SC_UI_ITS
Form: WIZARD_INIT of program SAPLBBP_SC_UI_ITS

Is there a way to call a SQL Program from an Oracle Report?

Morning friends. I had a question about Oracle Reports and them calling a SQL Program. Here is the problem at hand. I am hoping to not have to change the existing program a whole lot!
Currently, here is what is happening. I have a .sh file which calls the Oracle Report first and then goes on to call a .sql program. I am using Oracle Reports 10g and the call to run the report is RWCLIENT. This was earlier being called using RWRUN.
Because of certain issues of synchronicity with RWCLIENT, I am now looking to move the call to the .sql program to the Oracle Report (Ideally the AFTER_REPORT trigger). Is this possible?
The Oracle Report basically outputs a listing and the .sql program does a spool and creates a text file which is later used as attachment to the email and sent out to the person who submitted the Report.
Here is the shell script.
# Accept system input parameters
p_gradapp_user_id=$1
p_gradapp_job_id=$2
program_unit='GRAD001A'
rwrun.exe module=$GRADAPP_PATH/GRAD001A userid=$p_gradapp_user_id paramform=no desformat=$GRADAPP_PRINTER(GRAD001,1) destype=file desname=grad001-$p_job_id-1-1.lis p_gradapp_job_id=$p_gradapp_job_id p_gradapp_user_id=$p_gradapp_user_id batch=yes
exit_status=$?
program_unit='GRAD001B'
sqlplus.exe -s $p_gradapp_user_id @$GRADAPP_PATH/grad001b.sql $p_gradapp_user_id $p_gradapp_job_id
exit_status=$?
exit 0

If you are going to use rwclient try BACKGROUND=NO as an extra parameter:
background=NO: Runs the report synchronously. The client waits for the report to queue, be assigned to a runtime engine, run, and finish.
See: http://download.oracle.com/docs/cd/B14099_19/bi.1012/b14048/pbr_cla.htm#i656436

Calling JAVA webdynpro applications from SAP Business workflow

Experts,
Is it possible to call JAVA webdynpro application as a task from SAP Business workflow? If yes, please pass on any links to relevant documents.
Thanks,
Deepak

Hello,
You would probably want to use UWL in the portal. From UWL you can launch tasks from portal, and with proper configuration (for example with the help of transaction SWFVISU) you can easily start web dynpro applications from UWL.
I suggest you go trough the SAP documentation about UWL. Start for example here:
http://help.sap.com/saphelp_nw2004s/helpdata/en/39/a1bb5c4c0d4ab4a417e87ef35f1efa/frameset.htm
Regards,
Karri

About call a webdynpro program in R/3 report program.

Similar Messages

Maybe you are looking for