About creating data source(urgent)

Hi,
I am abap developer. i don't know much about crm.
our requirement is :
i need to create one infoset in sap r/3.
we want to use that infoset in crm server to create data source.
we use transaction code : CRMD_MKTDS
We specify these values.
Origin Type
RFC Destination
InfoSet
Description
businee pastner
But we are not getting any infoset from r/3 server.
we are getting only crm infoset.
I check RFC Destination. Its working fine.
It gives me error : InfoSet ztest either does not exist or has not yet been generated
Thanks,
Jack

Hi,
You can get the data using a db link and the proc is as follows..
CREATE DATABASE LINK OTHERDATABASE ...;
CREATE TABLE XXXX
AS
SELECT * FROM TBL@OTHERDATABASE ;
Good Luck,
Siva

Similar Messages

Urgent help: how to create data source for Weblogic RMI driver

Hi,
Please let me how to create data source for Weblogic RMI driver using Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhat

DataSource will internally do that for you (It will use RMI internaly) . You
dont have to worry about the details of using RMI driver. Thats what is a
DataSource is for.
sree
"pradeep bhat" <[email protected]> wrote in message
news:[email protected]...
Hi Sree,
What u have written is abt configuting Datasource for type 2 and
4 drivers.
But I want to know how to create data source for RMI driver. If
I map this datasource to connection pool that is created for
type 2 or 4 drivers, i don't understand why RMI drivers are
required in first place. If i do map the data source to connection pool
created
for type 2 or 4 drivers then where i
would not have used the URL as jdbc:weblogic:rmi and Driver as
weblogic.jdbc.rmi.Driver.
Hope u will help me.
pradeep bhat
"Sree Bodapati" <[email protected]> wrote:
Hi Pradeep
To create a connection pool you have to use a database driver not RMI
driver. So use a thin driver or the WebLogic jDriver for Oracle to setup
your connection pool. Once the connection pool is created you can create
a
DataSource and use this datasource to connect to the database.
The RMI driver can be used to get connections from the database via the
connection pool and in that case you dont need a datasource. Recommended
approach is to use a DataSource.
hth
sree
"PRADEEP BHAT" <[email protected]> wrote in message
news:[email protected]...
Hi,
Please let me how to create data source for Weblogic RMI driver using
Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new
DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhat

Urgent help: how to create data source for Weblogic T3 driver

Hi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhat

Hi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhat

Need Information about Generic Data sources

Hi Experts,
I need some information about Generic Data Sources in SD & MM applications.
Can you please tell me on which Tables u have created Generic Data sources ?
Just explain 2 scenarios.
This is very helpful for my Interviews.
Thanking you.

HI,
TBD10 --- Def., out of which IDOC fields a filter object is to be read
BD59 maintains that table
Rhea.
Edited by: rhea on Nov 4, 2008 2:09 PM

Create data source in BI 7.0?

hi,
while creating data source in BI 7.0 , ( from flat file data)
under extraction tab:
character set settings : default and direct entry is there
if i select direct entry i am getting character set and replacement character.
what scenerio we use direct entry and what scenerio we use default. if i select direct entry what is effect for my output.
please clarify.
regards
ss

System Default or Fixed Entry
If you choose Default Setting for the character set, in Unicode systems a file in UTF-8 format is expected, in non-Unicode systems a file in the format of the system code page is expected.
If you choose Direct Input for the character set, you can select an SAP character set and determine a replacement character, in case errors occur while converting to the system character set.
SAP Character Set ID
The 4-character name of an SAP character set as defined in SAP character set maintenance.
The following explains the naming convention in more detail:
First digit: Code
0 EBCDIC character sets
1 ASCII character sets
2 mixed single byte / double byte character sets
4 double-byte character sets
6 mixed character sets
8 double byte and multibyte character sets
9 reserved for code pages you define
Second digit: Country
1-3 countries that use the Latin alphabet (Western Europe, North and South America, Australia, Africa)
4-6 countries that use non-Latin alphabets and writing systems (Eastern Europe, Asia, Arabic countries in Africa)
7-9 reserved for special languages
Third and fourth digits: Sequential number
Example
0100 IBM 00697/00273 (Latin 1 - Germany/Austria)
0401 SNI BS2000 8859-5 EHCLC (cyrillic - multiple languages)

Not enough memory for Data Provider-Error while creating Data Source

Hi,
I am loading data into Master Data_Attribute InfoObject I am getting following error message while creating Data Source under "Proposal" Tab
"Not enough memory for Data Provider"
My Master Data InfoObject having 65 attributes
My CSV file having 15,00000 records
I am using BI 7.0 version
If anybody faced this problem. Please share with me
Thanks.

Hi
Here the problem with the space so plz contact ur BASIS people to increase the spae for particular object.

Create Data Source Module using OMB

I am not seeing how to create Data Source modules using OMB. I am assuming there is a property of OMBCREATE ORACLE_MODULE that I am overlooking. If anyone can provide assistance, it would be greatly appreciated.
Thanks,
craig

Hi,
Yes, there is a OMBCREATE command for creating Oracle Modules. And as per the Scripting ref Guide ( Page 4-157 owb 9i scripting guide) -
OMBCREATE ORACLE_MODULE 'src_module' SET PROPERTIES (DESCRIPTION, BUSINESS_NAME) VALUES ('this is an Oracle module', 'source module') This will create an Oracle module named "src_module", its description is "this is an Oracle module", and business name is "source module".
HTH
Mahesh

Newbie Question: Creating Data Sources

Our current Hyperion setup consists of the Hyperion 9.3 client that users access via a terminal server. We are trying to get the web version of Hyperion running.
I installed some base components of the Oracle Enterprise Performance Management System (11.1.1.2.0.940). It all starts fine and I can login with admin, but I do not see how to create data sources or load .bqy query files. If I create a new interactive reporting document, it makes me choose a Data Source from the virtual directory in which I do not have one. if I try to import one, or import a .bqy file, I browse to the file, select it, then always get a "File path is wrong." error. I also found how to create Data Sources using the CMC, but I do not see how to reference these. What am I doing wrong?.

HI,
What version of Hyperion planning are you using version 9.3 or epm11.1?
Because they have different ways of creating datasources.
In version 9.3 you can create datsource in the configuration utility.
While in version 11 you need to create planning application first before creating datasource either by classince planning application or epm.
Thanks,
Hanson

HOW TO CREATE DATA SOURCE FOR MAXDB

hi,
i am using hibernate in NetWeaver with maxdb.
i have to give datasource name in hibernate.cfg.xml
but i do't know how to create datasource for maxdb.
please help me.
Thanqqqqqqqq
Guru

The following link gives u how to create data source
http://dev.mysql.com/doc/maxdb/en/84/1d733cefd63c38e10000000a114084/content.htm

Create Data Source for hierarchy

Hi all,
Can any one tell me how to create Data Source for hierarchy for the object (for example 0MATL_GROUP)?
Kindly Help,
Thanks
Laura Gómez

Hi Laura
with BI7 this feature is not yet supported. Try with 3x datasource

Creating data source for planning area

Hi Experts,
Can you please help me by providing steps to create data source for planning area.
Thanks in advance for your help.
Regards,
Brahma

Hi Brahma,
Please follow below link....
http://help.sap.com/saphelp_scm50/helpdata/en/00/dc54384ac9a81be10000009b38f8cf/frameset.htm
Hope this may help
Regards,
Harshil Desai

Error In creating data sources

Hi,
I am creating Data source in RSDS transaction that time I am getting following error
"No fields were supplied"
how to resolve this?
Regards,
Akshay

Hi,
First check whther the fields are there in DataSource for transaction data
DataSource for master data
DataSource for attributes
DataSource for texts
DataSource for hierarchies
If the fields are there in datasource Deactivate AND Activate datasource once again
Regards,
Marasa.

How to create Data source in BI7( r/3 extraction)

Hi,
I have created the data source(z_emp_data) at r/3 side and transported in rsa6.
could any one let me know how to create the data source at Bi 7 end? should i create the same data source(z_emp_data) at BI 7 end? i have created the table at r/3 from which i want to load data.....please give step step details..its very urgent....
Thanks
Manjula

Activate it, Create a transformation to the target infoprovider, Create a DTP to schedule the transformation.
You will also have to create an infopackage to get the data from the source system into the BI system.
There are a lot of "stuff" to do with datasources!

About Query Data Source Columns property

Hello everyone,
I'm new to Oracle Forms version 10.1.0.2.
When I create a data block based on a table using Data Block Wizard, the block's Query Data Source Columns property is automatically populated with column definition entries corresponding to the columns of the base table.
I tried making changes to these entries, for example by changing the data types to wrong data types or even deleting them, and I found that those changes had no effect on the block at all. The form was still working as I wanted.
Please explain what is exactly the role of the block's Query Data Source Columns property.
Thank you very much.
p.s: The F1 key help says "The Query Data Source Columns property is valid only when the Query Data Source Type property is set to Table, Sub-query, or Procedure". So, please explain in each context of Query Data Source Type.

p.s: The F1 key help says "The Query Data Source Columns property is valid only when the Query Data Source Type property is set to Table, Sub-query, or Procedure". So, please explain in each context of Query Data Source Type.
IMHO those properties are very self-explaining: It is the data source of the block, or in other terms: how it is populated.
Table means the data block is based on a table and subsequently will be populated by
select col1, col2, col3 from your_table
With sub-query the block will be populated with your subquery; forms will issue
select col1, col2, col3 from (
-- this is your subquery
select col1, col2, col3 from tab1, tab2 where [....]
With Procedure in short you'd have a stored procedure which returns a ref cursor and the block will be populated by the ref cursor.
As for your question about the name: this actually should matter; the default is NULL which means that there needs to be a column which has the exact name as the item so in the above sample with table the item associated with your_table.col1 should be named col1. If it isn't the property should be named like the column. If this property also doesn't reflect the name this shouldn't work IMO.
cheers

Error in request transport of a newly created data source

Hello,
I'm implementing a BI 7.0 project for three factories of a company in a single BI system. I have to separate their CO-PA data sources, so I created a new DS in tcode 'keb0' with the same fields of the standart CO-PA DS named 1_CO_PA100UAKK, and got a request in test R/3 source system.
During the transport of this request to the second test source system,which is closed to implementation, I got an error message, saying that 'Table ZOXARD0003 could not be activated, (E- Nametab for table ZOXARD0003 cannot be generated ) and Ended with return code: ===> 8 <==='.
ZOXARD0003 is the table of the new DS I created.
But, as a conflict, I can see the new DS in the second source system, in its 'rsa6' and see ZOXARD0003 table in tcode 'se11' of the second source system. How could this happen?
Could you help me about this? What does this message mean? Should I do somethingelse after creating DS in 'keb0' ?
Thanks for your help.

Hi Deepak,
Thanks for reply.
I checked the table and got warnings about enhancement, but not any error.
And yes, I did a quick extractor check in test system and it has no records as you had assumed.
What sould I do? Could you explain step by step, please? I am new in BW.
Thank you very much.

About creating data source(urgent)

Similar Messages

Maybe you are looking for